#110

Amine Blush is a cloudy looking effect on the top of cured resin, it can also look a bit oily sometimes too... But it is something none of us want to see on our finished art.
The cause of Amine Blush is usually because of the humidity and temperature of the area where the resin is cured.
In this video I show the things I use to avoid Amine Blush and other problems caused during curing.
I bought my heat mat and thermometer/humidity monitor from Amazon, you can find the links here.
US Amazon heat mat - amzn.to/3n1nrHT
Thermometer -amzn.to/3o7u50n
UK Amazon heat mat - amzn.to/38OAMhG
Thermometer - amzn.to/385eEAd
******************************************************
This is the video link where I show you how I made the Jewelry in the giveaway • (#104) How To Make Jew...
Use this link to get 10% off your order. craftresin.refr...
The coaster moulds are from Just4youonlineuk... use this link to get 10%off pourgreatart.c...
This is the link that shows how I do a flood coat after embellishing • (#106) How To Do A Flo...
This is the link to coating ceramic tiles with resin • (#100) How To Resin ce...
***********************************************
I got my awesome personalised stamp from Zazzle go.magik.ly/ml...
***********************************************
Products I use can be found in my Amazon shop:
Amazon Links For US:
www.amazon.com...
Amazon Links For UK;
www.amazon.co....
**********************************************
Some of my links are affiliate links, which means I may receive a small commission if you make a purchase at no cost to you... Thank you for your support
Visual Sense Crafts and Tilly Douglas are participants in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.co.uk and Amazon.com
************************************************
Arteza paints - Click on the link below and use this code to get a fab discount - PB8PROMO shrsl.com/25cdt
************************************************
Visit my blogs here... www.visualsens...
and here... pourgreatart.com/
Follow me on Instagram here... / visualsensecrafts
Facebook ... / visualsensecrafts
Twitter ... / douglastilly
If you would like to make a donation to my channel... www.paypal.me/...
If you have enjoyed this video please consider subscribing and giving this video a thumbs up.

[@Soifdesang9]

Thank you, I appreciate the common sense advice and approach!! I love in a cold area, under 65F/18-19C is most of the year, so this is great! Would aluminum foil or a baking sheet under the silicone mat help at all, besides making it easier to move the molds...?

[@alisonjordan1152]

Do you do yours in a shed. Uk houses don’t have much space so can’t do it inside as they say you can’t because of fumes. Iv got a hot tub in my shed that keeps it warm in the summer months, would I b able to resin in that place and cover with a box like you did. Would it be ok otherwise I am not going to be able to do it. I’m still collecting my bits to do it, I am a beginner. Iv got a couple of resins but nervous about starting. Until I can work out where I can do it. I was going to do it in the garden if we get any British summer but stuff may get in to it now, do you have any tips for me please and Iv just subscribed to your channel tonight so now I will look at what you have made and thank you

[@TillyDouglas]

Hi Alison, I'm very fortunate to have a separate studio for my art and resin work, it has bifold doors which I can have open for fresh air. I would be carful of using resin in the shed with a hot tub in it because of the moisture involved... resin really doesn't work well with any contact with water.

[@GizzneyChannel]

I've been playing around with a heating pad but it has been causing bubbles. Any idea why? I do have a cover i use that is insulated, is it due to that?

[@lizblank4852]

Thank you, that's a very helpful video

[@nebijeN]

Hii i know this video is 1 year old but hopefully you will see this.. i dont have a garage so i have to do it at home (extra room) and i leave the windows open so i feel more save can it still cure while the windows are open if i do this tecknique?

[@TillyDouglas]

Hello, yes, this should be absolutely fine... I would keep the door shut and have the windows open a little bit, just enough to vent the room. If you cover it with the box and use the heat mat, you shouldn't have any problems. Good luck with it all, and remember to have fun and enjoy the process! 🌹

[@cathysmart7038]

thanks for this! im in Canada and im just starting out with this whole resin journey. fist 2 attempts have been kind of a bust. they haven't cured fully . still bendy . i feel like i mixed it right. and did not over do it with colours. so i figure its because its so dang cold up here. i gunna try this tip for sure. thanks again!

[@TillyDouglas]

Hi Cathy, you're very welcome, I hope it works as well for you as it does for me! It sounds like you have eliminated the other possible causes, so the cold is highly possible. I hope you have lots of fun on your resin journey... Be careful, it's very addictive 😆 🌹

[@tessaholloway3891]

Thank you so much for this video! I am new to resin and all of my projects have had these spots on them after drying. I couldn’t find any videos on the problem. I now know what to do! Ty!

[@TillyDouglas]

You're very welcome Tessa, I hope you're having lots of success with it! 🌹

[@amandapetz440]

This was such great advice! Im new to making resin keychains and such and my family and I all hate the smell and I have to do my work in the garage but none of my work is turning out properly. I will most definitely try this!

[@TillyDouglas]

Thank you very much Amanda! I hope it works out for you. 🤞

[@linwoodnymph6113]

January 2023 Yeah, the fumes are very harmful! No way can I do resin in my teeny apartment. I had planned on doing it on my porch, but I live in the desert where winter daytime is max 65 F. & nights are in the low 40's F. This would be wonderful as I'm anxious to get busy with resin! 😃. Did it work for you?

[@monikamuszynska2824]

@@linwoodnymph6113 it works perfectly for me when casting, i have now 4 of those heating mats

[@rawanbouabdallah7221]

Hello Plz the thermometer will take the temperature of the matt or the room temperature ?

[@TillyDouglas]

Hello 👋 it will be the room temperature.

[@ShirleySchreurs]

Is it safe to leave it on at night? Bcs it has to stay on for like 24hours no?😊 thank you so much btw for making this video! Helps a lot

[@TillyDouglas]

Thank you very much Shirley! These mats are made to be left on for long periods of time, so I can't see any problem with leaving it on over night... and it is something I doo regularly. It depends on the brand of resin you're using as to how long you need to leave it.

[@thebeautifulcakes]

Thank You, Thank You Very Much!!! Value information just what I need for my art work. You are a life saver.. Many blessings for you 💕

[@TillyDouglas]

You are so welcome, 'm so pleased it was helpful for you! 🌹 ❤️

[@snedge28]

Thanks for the tip about the heat pad, much better than balancing things on a hot water bottle! I'm also in the UK and bought some resin in August, it's now November and my resin has gone cloudy before mixing it with the hardener. Did it get too cold? Can it be rescued? Struggling to find any info about cloudy thick resin prior to casting.

[@TillyDouglas]

You are very welcome, I'm so pleased it was helpful for you! It does sound like the cold has affected your resin, but don't worry, you can certainly save it! Before you start using it, put the bottle (or bottles) in a container of hot water.... Just have the water hot enough so you can still put your hand in it without burning yourself. Make sure the lids of the resin are firmly closed and wipe the bottle dry before removing the lid because resin really does not like water! Just leave it in the bath of water for 10 minutes or so. The cloudy look is the bubbles, they will dissipate as the resin warms, and it will also help thin the resin again. One other thing, if you are heating the resin in this way, it will reduce the working time of the resin... It's not a problem, but just something to remember. 🌹

[@mad6978]

Could you plz run a video on how to make a trellis yarn necklace. The wrap around neck twice with fringe

[@TillyDouglas]

Yea sure! 😃

[@cannellegarrett1254]

Could I put something over it and leave it outside to cure even though it’s still cold outside? I’m new to resin and I live in an apartment with a dog so I wanted to work with it on my porch.

[@TillyDouglas]

I don't see why not Cannelle, as long as the weather conditions aren't extreme.

[@alyssatorrence1988]

Hi ! How long should you keep the heat mat on? A full 24hrs?

[@TillyDouglas]

Hi Alyssa, I usually leave mine on for 24 hours.

[@salin.1020]

I was having this problem for my molds hopefully this helps thankyou🌼

[@TillyDouglas]

It's worked really well for me, so fingers crossed for you Salin! 🤞

[@tandylion]

What temperature would you recommend for me to set my heat pad to? Between the 22-26 c?

[@TillyDouglas]

Hi Tandra, it's a bit of trial and error, and depends on whatever temperature your brand of resin recommends for the drying temperature. I have my heat mat setting on somewhere near the middle and then adjust is a necessary when I cover it with the plastic box.

[@lindakitchens2158]

Would an electric heating pad work for curing resin ?

[@TillyDouglas]

Hi Linda, I haven't tried one so I'm not sure. The reason I like these mats is because they are so slim and flat. 🌹

[@michellelara5569]

Tilly Ross! That is an amazing idea!! I have to work outside under a pop-up gazebo. And how did I miss your giveaway?!? Hope you are having an amazing Christmas love! Happy Christmas 🎄!

[@TillyDouglas]

Hi lovely Michelle! 👋 You could create a little micro climate with this, so I really hope it works for you! 😃 I gave myself a couple of days off over Christmas, which is a rare thing for me, so I had a lovely relaxing time! I hope you had a good Christmas and all the very best for the new year ahead!! 💜 🌹

[@michellelara5569]

@@TillyDouglas I did the same! Took Tuesday off traveled up north to my dad's from Los Angeles and just got back to work yesterday. I worked on Thanksgiving and didn't have a day off until Tuesday. It was good. Got to spend it with my dad. And as soon as I finished your video I started looking on Amazon from your link looking for heating mats and everything! Thank you again!

[@Jennygeee]

Thanks for this Tilley, I have just started with resin and I’m having terrible problems! I’ve been trying jewellery with pressed flowers in it but have yet to be left with a perfect finish, there is never a lovely flat shiny finish so maybe this is the reason, maybe I will try this so thank you so much! Could you let me know where about on the dial you have your heating pad? I tried to click on you Amazon link but for some reason it won’t open 😞

[@TillyDouglas]

You're welcome Jenny! Just a thought, but do your moulds have a shiny base, or a matt base? If you pour resin onto a matt mould, when you turn it out, it will have a matt finish, but if it has a shiny base it will have a shiny finish. 🌹 I have my dial set at about halfway around, but it really depends of the setup you have and the temperature in your own resin area. I did check the links, but they are working fine from my end

[@Jennygeee]

@@TillyDouglas I’m using open bezels for the jewellery and I’ve tried them on shiny file dividers and sticky tape, I think I’m going to buy some translucent powder to colour the resin and some moulds to see if that helps, I’ll also try a heat pad. My art room is a large room upstairs that has heating but obviously at night it does get colder. I will persevere, practice makes perfect or so they say 😆

[@annettehill6264]

I love your information on the resin mats and temperature. I don’t think anyone has done this before and I watch a lot of video’s. So thank you for sharing.

[@TillyDouglas]

You're welcome Annette! I haven't seen anyone else mention it on KZbin either, so hopefully it will help a few people.

[@The2Angels]

Will this prevent my resin getting bubbles in while curing ?i am new to resin and have wasted lots due to micro bubbles coming in when curing in a 20oc room

[@TillyDouglas]

Hi Dee, it could help, do you warm your resin before mixing it by standing it in a bowl of water first? (Make sure the tops are on properly and make sure you don't get any water in the resin) ... You can also use a torch to get bubbles out OR spray isopropyl alcohol on the top which will also help get rid of bubbles.

[@The2Angels]

@@TillyDouglas thank you so much for your help. I have tried all of those things so i am obviously doing something wrong but will keep at it. X

[@trickynicky4268]

Where did you get your thermometer and your silicon mat?

[@TillyDouglas]

I got them from Amazon, I put a link to them under the video in the description.

[@adrianacuellar6256]

How long do i leave it if I use the alphabet mold?

[@TillyDouglas]

You will need to refer to what the suggestions are on the particular brand that you use. There are a lot of different sized alphabet molds, so the depth and size will also play an important role here.

[@EmilieHrx]

Hello! How to adjust the humidity level ? Mine is 59%, is it too high? Thanks in advance !

[@TillyDouglas]

Hi Emilie, have you tried using a dehumidifier?

[@EmilieHrx]

@@TillyDouglas Not yet because it's a bit expensive and I'm not 100% sure that humidity is the source of my problem (amine blush) ...

[@TillyDouglas]

Ah ok, you could test it out with some small sample pieces so you don't waste too much resin.

[@Amberfmorris]

Hi Tilly, this video is very informative so thank you! Finally I can try and find a solution to my amine blush. Could you use a plastic tray or would you recommend a silicone tray? Could I just put baking paper on top as I do open bezel work with dam tape (no moulds) thank you in advance :)

[@Amberfmorris]

I’ve just look at your insta and funnily enough you’re also from Lincolnshire wow!

[@TillyDouglas]

Hi Amber, you're so welcome, please let me know how you get on with it. Personally, I wouldn't use a plastic tray... I'm not saying it wouldn't work, ... I would just feel safer knowing that silicone is made to be used with heat.

[@Amberfmorris]

@@TillyDouglas thank you for your reply. Mine came today and I will try baking paper as I know it can withstand high temp! I will let you know how I get on :) x

[@marianavictorio7059]

Thanks for the advices Tilly! It will certainly help me a lot! Greetings from Brazil!

[@TillyDouglas]

Hi Mariana! 👋 You're very welcome, I really hope it helps! 😃

[@salin.1020]

@@TillyDouglas it did !!!!! thankyou🥰

[@lucyssweetjournaling]

Thanks for a great video, x

[@TillyDouglas]

Glad you enjoyed it!

[@lauracollins3252]

Can you use the mat if you doing more than 1 layer

[@TillyDouglas]

Hi Laura, yes you can use the mat when doing more than one layer. 👍

[@lauracollins3252]

@@TillyDouglas thank you x x

[@desireeross9651]

Love the puppy mat. I got one via your store

[@TillyDouglas]

They're great for using with resin! 😃

[@Zin-yp3di]

This is brilliant! Thank you.

[@TillyDouglas]

Thanks Jinny, I hope it's helpful for you!