12 Ways to Customize Your Truck Suspension

Joel and Eric from Music City Trucks dive into the world of custom suspensions, exploring a variety of lift and drop options for your truck, from body lifts and block lifts to leaf spring swaps and drop spindles. They break down the pros and cons of each method, providing insights on safety, cost, and performance upgrades, including frame notching and airbag setups. Whether you're looking to raise your ride for more clearance or slam it down low for that street-ready look, they've got you covered. #trucks #suspension
0:00 - Intro
0:43 - Body Lift
1:22 - Block Lift
1:45 - Leaf Springs
2:18 - Spacer Lift Kit
4:20 - Drop Spindles
4:46 - Flip Kit
5:28 - Cutting Your Springs
7:03 - Air Bags
7:55 - Back Half Kit
8:46 - Rear Four Link
9:05 - Coilovers
9:51 - Tubular Control Arms

[@danielmaguinda8985]

Watching from Philippines 🇵🇭

[@bawintermage8351]

Hey,do you have the Suzuki Jimmy there, and you seen/ driven one?

[@jensenrodriguez2260]

👍👍👍👍👍👍👍👍

[@mikepense3782]

Coilovers need regular maintenance and should not be daily drivers? Please elaborate.

[@UpperRobin29]

I'll just keep stock ride height lol

[@ericgamble5742]

I'm rocking a full 6 inch rough counter lift and the most important part is your tires I think tires are wear your can spend a lot ...got 35 inc Toyo mud grips on my truck

[@bmstylee]

Good tires are expensive. There are a ton of cheap tires that are cheap for a reason. I've got 33" BFG KO/2 on my truck and they do good for most situations I will get into. They aren't exactly cheep at $300/tire.

[@burrvisiontv]

I want to raise my truck but its a 2 wheel drive 1980 C20. Does anyone know how?

[@johnscott2076]

Lift kit

[@bmstylee]

Rough Country has a 4" kit for ya.

[@tomduncanrealestate]

@@johnscott2076😅y see d😊

[@burrvisiontv]

@@bmstylee i looked and keep seeing the 4x4 style. Not 2wd. Or im missing it?

[@burrvisiontv]

@@johnscott2076 from where

[@vwsandvettes3253]

I'd like a '68-'72 or '73-'87 GMC 2500 with a big ol' 8 or 12 inch lift (springs only, no blocks), clocked txfr case with deep crawl ratio, Dana 60s F&R with 4.88 R&P, and 39 or 42 inch Swampers. Oh, and with a 454 with forged internals backed by a built manual transmission!!!

[@toycoma98]

A friend of mine lifted his tacoma with spacers and it rides like crap. Gives me motion sickness when i ride passenger. The whole cab shakes and moves with every bump and uneven road.

[@bmstylee]

Spacers are the problem. They have no give to them. I didn't want to get crazy on my Silverado so I did a leveling strut. It has the lift designed into it strut instead of adding a block of material that has no give to it.

[@jeffatkinson6848]

cutting coils tricky u can take temper out coils makem junk

[@bmstylee]

A cutoff wheel makes quick work without hurting the heat treat.

[@edwardmohr5798]

In FLA, they have got was is called, the squatter's suspension. Stupid, dumb and dangerous.

[@bawintermage8351]

Is it as stupid, dumb and dangerous as supporting a Governor ( Desantis) who is working to dismantle basic human rights and plunge your state into an fascist fantasy. MAGA is the most significant threat to America since the Southern rebellion.

[@bmstylee]

It's not just Florida. We have that up in Ohio as well. I know a few shops around me and they won't even do the work for safety reasons. Thankfully it's only a small group of people doing it. Now if we could get rid of the larger group of fools making brodozers with wheels stocking 4" outside the wheel well I would be much happier.

[@JSFGuy]

With the lowering ethnic look.

[@badcopnodonut08]

The "respect all builds" trend needs to go away. Slammed trucks have always looked like shit. Go get a little ricer if you're trying to slam something.

[@toycoma98]

What do you drive, a minivan?

[@bmstylee]

Nah. Build what you like but don't try to tell me that the rust bucket paint look is actually good looking.......when it isn't.

[@zippythechicken]

you will learn nothing from watching this video... unsubscribed after a very very long time ... i use to watch these shows when they were on TV but they are less than useless anymore... fact is you have to know what you're talking about before you try to teach it to someone else... not just know it but be a master of your craft... not a watch one . do one . teach one ... kinda deal

[@dancampbell4400]

Please enlighten us oh great one. What exactly gave you the perception that they don’t know why they’re talking about? I know a lot of what they said is basic knowledge but we all come from different skillsets…

[@zippythechicken]

@@dancampbell4400 exactly what i said bud... nothing to be learned in this video