$120 Ebay Turbo Motorcycle - Part 1

[@yeetskeetledeet8184]

This is cool stuff Kyle. I know your pretty humble and you don’t think your the best person to learn fabrication stuff from, but I’m trying to learn tig rn and any bit helps. I enjoy hearing your approach to setting up the machine, what rod to use where, etc. Thanks for sharing 🤙

[@junkforlessutube]

If this was a Harley, the ECU would have inputs for boost referenced oil leaks.

[@R1j0hn]

That's if the ECU actually works...

[@junkforlessutube]

@@R1j0hn Now you are going to get me in trouble...

[@ReignitedAuto]

90% of Harleys made are still on the road today....... the other 10% made it home.

[@ThenameYTchose4me]

Kyle “the Canadian turbo yoda” lol

[@ldog5625]

So impressed with this, makes me want to do something although I couldn't, I find silver tape easier to use for the purge, and if you keep a cup of water with a rag in it next to you when tacking you can keep most the distortion out, I do this when welding table tops and stuff, weld a little then wet it, just a thought mate, great video

[@charlespeagler8010]

why not reverse the turbo, face intake to rear and move everything else forward? clock the charge pipe to intake, throttle body on turbo.

[@builtonabudget6160]

I stop what I'm doing every time to watch your videos

[@almostoemgarage8143]

Damn dude, first the LS stuff, now bike stuff??! This channel's content is getting better and better!

[@Smellswoods2896]

Hahahaha the channel is called boosted lifestyle for a reason. You really are the Canadian turbo yoda. Keep killing it brother. Oh yeah and only the fake ones can get in both holes no substitute for real.........pipe

[@krishiatt7203]

My dude is going to be able to fabricate anything here pretty soon.

[@that22channel]

For real

[@theANGRIERone]

SOMEBODY TAKE THE WELDER AWAY FROM KYLE Just kidding. This is good stuff, you manic!!

[@therealboofighter]

Go all crazy Cletus style and put it up high behind the rider. Lol.

[@Psyconinja1532]

Like a sissy bar but turbo

[@OriginalMomo]

Cleetus style is up in your face, right in front of the handlebars

[@carlosduranmorillo2444]

Upload a video of the correct installation of a turbo on a carbured motorcycle

[@vinnierolla]

Cool build👍 can’t wait to see this thing spoil under load 💪

[@DDSpeedShop]

I'd be scared to leave anyrhing of mine alone with you. It would come back turbo'd haha

[@Boostedlifestyle]

You say this like it's a bad thing!!!

[@kevintucker3354]

When are you going to turbocharge a Mopar big block DD Speed Shop?!!

[@StraightLineCycles]

Yay, bike stuff holy crap a turbo!🤯🥳🥳

[@furkane.2866]

Please can someone help me... can i turbo my Suzuki Intruder VL 284cc twin cylinder 24HP bike? Is it possible? I have turbos came out from cars in my backyard and i just wanna have fun with 😅 (will use only one turbo). Is 280-285cc twin cylinder bike engine produce enough power to run a Turbo? Btw my english is not that good if you didn't understand it's my fault 😁

[@pajipower1]

i was so deep into this video and the indian music at 7.0 mins got me laughing so hard!!! haha

[@raiszakwan3332]

no intercooler?

[@4BillC]

K03 turbo? That's what's on my car! Lol

[@brandonpanozzo86]

Hell yeah kyle turbo everything

[@joshsutcliffe6099]

Teach me how to do this. I can make the pipes. I just need some pointers and basic know how on how a turbo works with a multi carb bike.

[@trey19825]

If it's butted up you should run your first pass without filler... you want the eges to break down on the inside

[@namericanprepper4648]

Will this work on mini bikes. If so how would I tune

[@davidsolomon915]

What size turbo is this

[@CalonRich]

How if i use for motorcycle 250 cc v twin

[@KillinReapers]

To get the manifold to fit you have to make it longer/too big before you weld and try eyeball how much it will shrink.

[@Casual_BackPacking]

Is it faster?

[@Ulfric1997]

What turbo is that

[@jasonolson3322]

Well this came out of left field! Nice little fill in project...lovin the new found enthusiasm my man! 👊

[@tobylangdale95]

A turbo that is too large for the engine size dramatically loses performance. Two small turbos are better than one big one. I want to turbo my Hyosung gv 250, and I am researching what would run a turbo small enough for my little 250? I plan on doing a video on the project when I start it. Any suggestions would be greatly appreciated. Thanks guys,loved your video and subscribed. I'm going to run an oil heated draw through manifold system rather than blowing into the carburetors.

[@Naughtyonenine]

Wrong.

[@kasuraga]

Please cut out the flex for the vband. It'll look so much better. I wouldn't trust a flex pipe to be part of the turbo manifold.

[@DAPerform]

The bagel I had for breakfast was bigger than that turbo 🤣 🤣

[@R1j0hn]

I hatched a Brown Toilet Snake in my bathroom this morning bigger than your bagel.

[@nealp.2841]

Is already been two years since you did this!!?? I got a new motor for my bike, I'm contemplating putting one of these on her...

[@ClassicRider]

Are you going to suck more air and fuel thru the carb via the turbo or compress air thru the Carb ?

[@Glen_Patti_H]

Cool way to change it up but still sticking to that Boosted Lifestyle. Bad Ass!

[@Barton_Motors_Ltd]

More welding teaching plz! Any channels you recommend for someone who’s brand new to welding?

[@aaronmatthews9670]

'the fabrication series' is great!

[@limitlessbuilds]

Sweet! Was just waiting for a weld to cool off!

[@matthewnickolas7509]

Bro u kick ass love what u dog an your enegery is amazing. Keep it up canada man.need to come to fl the weather is great.

[@andrewhulliberger3336]

wheres the link to the turbo

[@kunipshunfit]

What turbo is this?

[@mayracingandfabricationco.20]

Kyle...(in my Cartman voice) what's the deal with the star wheels in the background? Using for Virginia's car or do you want to sell em'? I would of used a small t3/t4 my opinion but if it's laying around why not use it...

[@allawa]

Yeah don't give Kyle a welder next thing you know his riding lawnmore will be turbocharged

[@johnstefani6738]

Great song. Milky Way.

[@antek9504]

Major problem... Its cool and all.. But i have boosted bikes.. Sleds.. Quads.. Cars.. Etc.. And i learned it the hard way.. If you have more than one sylinder both exhaust pipes have to be the same lenght no matter where you put the little dragon jet.. Because with one pipe shorter you have different back pressures between the sylinders and both pistons runs at the same crank.. So you will end up with many failures eventually.. Worn out bearings.. One sylinder heating up faster.. Bad spark plugs.. You name it.. Thats why you see on take turbo manifolds on cars.. They look like a big noodle mess sometimes especially on fwd cars because of the little room it has.. All the pipes that comes out has to be the same length.. Different backpressures is no bueno..

[@johnb.6468]

Have you ever heard of a Subaru?

[@antek9504]

@@johnb.6468 have you ever seen a reliable Subaru?..

[@centennialfarm11]

I have a vtx1800 I'm considering putting a turbo on.

[@budddove6480]

I had one with a supercharger kit. It was a burnout monster. Even more so than stock if you could believe that,lol. I was going to keep it, but a guy with extremely deep pockets had to have it. He bought it for the, I dont want to sell it, throw out a huge number price. I bought another 1800 with just under 4000 original miles, and a 750 shadow with 600 original miles. So now I've got an 1800, a 1300c a shadow, and a soft tail slim. My oldest son took interest in the shadow. No license or permit yet, but he's already almost done building it. His goal is to ride it to high school as soon as he can get his permit to ride. Ive owned and raced bikes my entire life. All different makes and models. Once I got old and into cruisers, I tried many. The VTX 1800 is by far my favorite. I ride my 1300 daily for work. Great bikes. Sorry to ramble ..lol

[@R1j0hn]

You need more practice, or maybe you just need to try, rolling your wrist around the pipe while TiG'ing. Use your pinky as a "stand-off" and drag it. And why not cut the whole Y-section out and move the turbo back 10 inches, so the turbo outlet runs strait into the intake ? He'd still have leg-room.

[@fabio77809]

nice new project you are building

[@MezzysAutomotive]

Background song during the 10:16 welding?

[@kd1_1]

What is the turbo model?

[@burtonwhitaker6849]

Great video man 👍👍👍

[@marc-antoinevezina9814]

Where do you get your schedle 40 piping?

[@jeremyburleson8271]

Can u explain the hose and foil?

[@kasuraga]

He's plugging up all the big openings and feeding an inert gas into the tube so the back side of the weld doesn't get contaminated. It makes for better welds.

[@Hamsteren91]

Uh very exciting build👌

[@MrKyle200]

This is gonna be legendary!!!

[@michaelokeeffe490]

quality timing Kyle I literally said that’s what sh... as it then appeared on my screen 😁

[@kevintucker3354]

I say that to myself at least 10 times on every one of Kyle’s vidjas...

[@trrond]

learn about post heat after welding.. to remove tension.

[@kevintucker3354]

What is the bike? What motor? Honda shadow? 1100 cc?

[@TokyoCollins]

Honda shadow phantom 750 its a 2010

[@Doomsooth1]

I am interested to see what breaks first.

[@chesterrush5570]

Kyle I have a third gen Camaro big block 535 I can bring that over for you to turbo LOL if I ever lose the nitrous it would have to be for twins

[@Boostedlifestyle]

ThTa big 😂😂

[@banneddamn]

Im lucky my motorcycle came factory turbocharged 😎

[@lakarra3hyababa51]

Type and model?

[@banneddamn]

@@lakarra3hyababa51 84 kawasaki 750 turbo

[@georgem.6136]

Will that plug wire survive?

[@thman6453]

Your nuts if you mess with that bike lol total death trap 💀

[@Bigninjon]

"Thicker rod" "stuff this full" Kyle 2020.

[@chewyervin]

Hay Kyle, I’m new to your channel and loving it! Peace easy I get but get that V?

[@KalFx3]

Fuck yea this is gonna be cool. I saw that bike in the background on a few vidyas and hoping you were gonna give us some content with it. Pumped

[@JNorth87]

Flexpipe in the manifold? good lord. RIP

[@Bloodcaked102]

need link for that turbo!

[@vinnyvega1985]

I want to do this to my Road King sooo bad

[@ronniewilliz153]

Engine itll never be a motor lol i know you said that just for a response an i responded lol great vid.

[@julio7861]

This is so sick!

[@kylejackson1236]

Don't do this to me kyle I do not need a turbo on my harley lol

[@nelsonperez9385]

Sick dude!

[@shortattentionspangarage1312]

Did you seriously fire that up without an oil feed to the turbo? LOL!!! Say goodbye to your turbo bearings.

[@redrocketfab9938]

Good video... but the thumbnail was lacking compared to your other recents lol

[@icemanryth]

OMG!!! Love the bike.

[@DoucetteMichael]

That's what she said....... Ahhh Just Send it!!!!

[@captnjaygreybeard6394]

Honda made a production turbo motorbike.

[@SpoolingUpPerformance]

Hell ya buddy !!!!

[@MrBarnes613]

It was eating its own waste with open throttle body lol

[@kawasakicruisader5600]

Bro please come put a turbo on my zx10r.

[@playstation8779]

Grab a honda rebel 300 and turbo charge it with a bigger sprocket for the rear so it can get geared up. I have a feeling it's more capable then most think. Single cylinder thumper but puts out a good amount of torque at low RPM and opens up in the high Rev range a mid to high Rev range turbo with a proper intercooler setup and some beefed up internals and I think it could output a decent amount of power. Since it's an all aluminium chassis I'm sure we could put it on a diet and keep the same look. With a cafe racer kit mostly made of plastic and aluminium and some lightweight wheels and some grippy tires I'm sure it would be able to keep up. With a bigger rear sprocket

[@paullmight42]

cool project yo...

[@eddie_cooper]

Part 2 ???

[@Australiaforbeerman]

Part 2 ?

[@victorwilks88]

How is your video exactly 20mins long 🤔 Must be because you in 🇨🇦 ❤ 🤍

[@georgem.6136]

I like it!

[@timdulan]

So frickin SIIIIICK

[@timdulan]

YEEEESSS!!!!!

[@slicktop2jz855]

I like this.

[@santaax910]

part 2

[@calom4823]

C beaux se que tu fais .

[@Bigninjon]

"Hard object" Kyle. 2020

[@victorwilks88]

Boosted canadia!!!

[@parthasaikia2922]

Pardesi jana nahi lol

[@CraaaigV302]

Wtf 120 for that? Iv found gt35s on ebay for 120

[@Boostedlifestyle]

It was 135 cad on Amazon

[@cecilfrench2238]

You need to turbo our favorite girl's bug #some boost for alian trash kitty

[@PHATDAN420x]

Its a honda, you can run piss water thru it and it will run! Cant kill a honda lol

[@Bigninjon]

Bro 120 good no matter

[@jasoncleth74]

Motor Sik-al. Like WTF mate!. Its a Bike, or a 'motor cy-cle'. Arrrrrrrrrrrrrrrrrr

[@ripnsoar]

Come help me swap a 2j in my SC