$120 Ebay Turbo Motorbike - Part 2

[@stuntbikejourney9582]

Definitely need an update when tuned with some ride footage. I want to see how it runs. Looks great.

[@coreys121]

cuts off 1/4" "thats alot" shes a keeper bro

[@back-woods]

Where's the update and possibly a ride video with some dyno numbers????

[@DoctorMotorcycle]

Hey boosted lifestyle, I hope ya see this. I'm thinking about doing a turbo on my buell and I'm curious how fueling is going to work on your build. The fuel pressure regulator on the Buell's is located in the "tank" (inside the frame in the fuel pump hanger) so installing a 1:1 would be a PITA. I'm wondering if I could just use the existing MAP sensor and increase fuel pressure with my tuning software under higher manifold pressure vs. mechanically increasing the pressure with a regulator.

[@GREGWALLACE-y1u]

I'm doing a XL1200C front pipe only k03 turbo. Deliberate turbo lag. Harleys are beast anyway.

[@Heaviathur]

I use a $20 hot plate from can tire to preheat all.my cast stuff. Works good. Turn it on, throw the piece on it while you set the rest up, then weld.

[@tnev22]

Fab work has come such a long way bud good work. This things needs a heat shield and the foot pegs kicked out like an inch and it will be a lot more comfortable and safe to ride. The exhaust is going to get someone real good the way it is lol.

[@guidoheeling1179]

if you polisch up the manifold and downpipe the colouring will start all over again, and you get that nice even colour!

[@Indiandog]

Virginia sounds like Stan's sister Shelly from South Park. I just want to hear her say "Now I'm going to go listen to my Brittany Spears records" 🤣

[@Boostedlifestyle]

With her lisp 😂😂😂

[@Indiandog]

@@Boostedlifestyle yes 🤣🤣🤣

[@timdontwannasay5889]

Love your content Kyle! If you want a "more straight" cut slow down the saw drop. Less pressure on the blade with allow it less opportunity to flex to the side....

[@bradmyers99]

So true.

[@RickyTricky3223]

Put exhaust heat wrap on it! It will looks better on it as well and it will protect you and put a turbo heat shield as well.

[@Wowcoolcraftwithestep]

Hello, I just saw your video about the shadow with the turbo, I am preparing a vtx 1800 to put a turbo on it and I would like to know how you solved the problem with the gasoline system and if your motorcycle has continued to work perfectly. Thank you

[@208Concepts]

This is an EFI bike, so he could make changes with a power commander.

[@SignMeUpDesigns]

I’m stoked to see how this turns out. I’ve had an eBay gt15 turbo setup in a box for over a year. Maybe this series will force me to do cool stuff too.

[@topshlf_babyy]

do it!!

[@bobbyozanich7773]

Finally a respectful photo

[@Drunk3nMas7er]

Good trick I learnt that they use to straighten a diff housing you've warped after welding on new brackets is to weld the opposite side of the pipe to warp it back true :)

[@dontask8979]

Don't even need to weld the opposite side. Bust out the torch. As long as you have a alignment bar between the carrier bearings and the axle bearing you've good to go.

[@Westhelockpicker]

This is the ONLY channel that I will watch a long video the whole way through!!

[@joep1253]

You’re making this look easy. Good job

[@georgem.6136]

It did come out cool, interested for sure to see the tuning side as well! Nice job for before work lol

[@twotut2002]

Where is the "what dah faq " clip from? Hilarious

[@dwvw]

An earlier video. My fave is still "Jesus Christ, that's Jason Bourne"

[@gradyking4186]

Caught me off guard it was hilarious

[@havegrinderwilltravel5]

love ya work mate when i turbo my harley did little charge pipe like that but it pulsated when under boost so made intercooler on other side used that as my plenum volume and man did it come alive and smooth under boost keep up the crazy builds

[@killswitch6885]

FYI. Use Lysol toilet bowl blue gel cleaner on that stainless. It will make it look amazing. Do it at a car wash. Wear gloves 😉

[@slimbob8913]

Oooh, I love that little bit of turbo whine with that exhaust! Sounds like power!

[@ronhilario3366]

wil this work on stock internals? how about the added heat in the oil from the turbo? looking into doing this project on my bike soon!

[@DDSpeedShop]

If the corona doesn't kill Tokyo a boosted life style wide open throttle up grade will haha. Wicked work like usual.

[@acurarl9929]

There’s a lil screw with a finger grip knob on it that is next to the throttle that you can tighten an loosen for warm up process if it’s left a lil tight your throttle will hang up

[@rjwhipple8896]

Was there ever a part 3? I’m curious to see a test ride

[@donlorinsharp]

With those ape hangers it wouldn't be hard to raise the tank and then you could run that charge pipe under the side of the tank??

[@krishiatt7203]

My dude is FABtastic. Hey V, hope your foot gets better. Stay warm up there guys.

[@philhans7437]

Have you modified the carb for blowthrough yet cuz I think I missed that part

[@TheMick26]

This channel is so badass! I mean where else you gonna go to get a guy who sings while helds and then quotes Shakespeare?😂👌 Love you, homie.

[@guhfluh]

You might've should've put a double slip joint instead of the Vband for the header pipe because of the SS pipe growth with heat. It might be a bit of stress on the head flanges.

[@rawarrior2668]

If you decide to sell the quad turbo honda id buy it

[@Boostedlifestyle]

10k cad

[@tylorseverns9197]

I’ll fight u for it 🤣🤣🤣.

[@tylorseverns9197]

Damn u Kyle 7600 us

[@tylorseverns9197]

Do a quad civic give away like just a 6 does. Should boost merch sales

[@brandonpanozzo86]

Should get some mid controls instead of those forward controls they are sketchy on bikes with any power

[@charlesangell_bulmtl]

'Expert and a professional" Dry humor...gonna check out her links.

[@GREGWALLACE-y1u]

Fyi industrial maintenance mechanic, instead of shielding gas, compressed air works fine.

[@MrJohnno89]

Please tell me you have this finished, tuned and an update video

[@jasonboyce9650]

Seems like the bike is stalling because the turbo is still spinning and forcing air into the carb, leaning out the mixture? Bike idles fine and has good throttle response, but stalls out during what would be deceleration. The only experience I have with turbos is from watching your channel and a few others but it seems like a lean condition imo. Good luck!

[@big_air_jer9768]

Need an update on this bike please? Would love to see it tuned and doing some rides.

[@TokyoCollins]

gate is basically pinned makes 1lb or so but its been ridden the last 2 summers no issue and its nice because its more quiet!

[@vintagedashboard6810]

Have you done a Ford f100 240-300 6 turbo ?

[@carsonmckee3641]

Any update to this bike project?

[@Bishop_Heahmund]

Is there an update on this bike? How much power does it make?

[@davidfloener7539]

Congrats on moving! This winter should be epic 💰🔥💪😎

[@markhayes9114]

Keep up the good work hey do you know knick fron Knicks garage in Quebec I think

[@Rpmautojim]

Interested in more information. Any updates on this? What did you do about fuel? Tuning? Etcetera.

[@mikeparavinja3885]

dude you might want speed the blade up slow down the travel and move the gard in tighter to the peice so you will get a straighter cut with the saw

[@slobodankostic9571]

cool project, what turbo is that? do you have a link turbo on ebay?

[@back-woods]

WHERE IS THE UPDATE AND RIDE!

[@MrPolasiman]

Hello there, Is it possible to install turbocharger in honda xr200?

[@austinharris721]

It sounds amazing but aren’t u worried the pipe is gonna burn your leg?

[@KCTowingandRecovery]

Where did u get the cable I can’t find any

[@jameshennessey589]

Man I’m super late to this video but I need one of these! I’m in Newfoundland how much for one!

[@terrypickette118]

I used to have a bike with ape hangers that tall so I can ride around the neighborhood tripping low flying birds . I loved them

[@PartikleVT]

We need to know whats going on with this project! I so wanna build one for myself too.

[@TruththeRealist]

Where did the clutch cable come from?

[@nunyabidniz2868]

Where'd you get the tiny turbo for your project?

[@zx12r11]

Any updates to your set up

[@GREGWALLACE-y1u]

Your civic example will show that single pipe feeding is fine.

[@thatf4iguy919]

Is this a vz21 turbo that is on the bike ?

[@travish6034]

When is the next video on the turbo bike

[@cecilfrench2238]

For real though that looks sweet I like the exhaust pipe or downpipe whatever it is it looks cool

[@danielbautista0000]

Was there ever an update?

[@Sticks_989]

What turbo are you using

[@christopherfox8656]

Was this project disbanded? Big bummer if so

[@kevinsabins2929]

Do a ghostbuster sign burn out on the shop floor! Lol good job on the build buddy

[@MrArjanOskam]

Those Turbos are like €120,- in Europe apart from the €500 shipping

[@jeffreycole7462]

Which model turbo is that

[@marcoaurelio6941]

hey mate amazing video. no need for intercooler? im thinking about turboing my Motorcycle too, also a 750cc Honda :) cheers thank you for the video

[@dontask8979]

Iv had thoughts of a turbo Honda Monkey... Not sure why, but BECAUSE 😁

[@kaoswiththekearneys8984]

I’d love to see this finished up

[@exupakias]

Where is F.P.R. fuel pressure regulator???Without this and ECU programmed its not possible to work at all, you forgot many extras i think

[@Boostedlifestyle]

Tuning in spring

[@pirate1547]

Black heat wrap would look good plus protect that leg a little.

[@FoxyBuildsDIY]

Need an update on this thing

[@channbrenkman9749]

Where is part 3 ?

[@CarLoverPhotography]

That looks sick! Like a working sema bike

[@killinitdylan]

There has to be an update on this after 2 years! hate to go to this extent but PLEASE!

[@ricer0cket25]

What make and model is that bike?

[@douglasbaxter3346]

Any more content coming for the bike hope so

[@sobofabrications4042]

Lol that’s Alberta for ya. Lower BC is just pissn rain 😥

[@gachamii8940]

How much HP did this add to the bike?

[@oceunlimited1545]

Intercooler? Not needed?

[@mflbikes1870]

Nah full send

[@DDSpeedShop]

Other than me, Tokyo and Virginia, who wants more shirtless Kyle?

[@Smellswoods2896]

Im waiting for Kyles onlyfans thats where the good stuff will be

[@canadianwithabeard]

I want to see shirtless kyle roll around in some Canadian snow.

[@AverageJoeBuilds]

I was so stoked when you got on because I figured ya boy was doing a test burner 😭😭😭

[@gradycanty6432]

Where does he work

[@Drunken_Hamster]

Where's the next vid?

[@guidoheeling1179]

apart from the steering thingy i think it is a really cool bike

[@josue1996jc]

its a honda shadow vty 750 1998-2003, is a really nices relatively cheap byke if wanna incurse in the custom wolrd, i had a 1999 shadow 750 american classic edition, the best bike i've ever had, sadly i completaly lost it because of the venezuelan dictatoriship. ricgth now i'm looking forwar to buy another exact one here in brazil, and yould love to install that turbo kit on it xd.

[@guidoheeling1179]

@@josue1996jc thanks for the info, i hope you find the right one for your build. Have fun!

[@andrewdennison8403]

Sir I’m gonna need to purchase a pre made kit off of you

[@vickyallrounder1747]

Hy bro good job but your Safty point missing

[@jca66]

Dude is using industrial ss fittings instead of thin wall pipe. I understand why though. It's way easier to weld.

[@Boostedlifestyle]

And it's stronger. The sch 10 stainless stuff is super popular in turbo manifolds

[@briankinnear7461]

Gotta tell you I'm not a fan of the filler music. But will ignore it as best as I can. Really interested in the content. Very cool. No snow yet here in Cottage Country Ontario. But it's coming!!

[@theANGRIERone]

Doctor Boost, PhD.

[@cecilfrench2238]

Next video im turbo charging my lawnmower lol push mower at that or now i guess it would be the snow blower

[@Real_BumpyJohnson]

BOV?

[@michaelgouze4285]

The “what da fuck” gets me every time ✌️

[@jackdaniel1848]

Awesome! I love it.

[@mp19902009]

Can you build me one for my shadow?

[@Burnit53]

Sill 100*F in AZ....enjoy.

[@DoucetteMichael]

Snow...... Send it!!!!!!

[@ANDREW_ACV2]

Part 3?

[@vicsstang89]

Turbo doctor is on it..

[@TokyoCollins]

THE TURBO DOCTOR!

[@cvbgbnj6871]

You never did a part 3

[@daverabe229]

You should get a snowmobile and twin turbo it lol