Рет қаралды 13,732
Music by Tokyo Music Walker - Sunday Coffee
INSTA - / kamijuins
E-mail - j3i3s3@gmail.com
JUMA SKATE COMPANY - jumaskate.com/
Here is a description of what's unique about the trucks:
They are meant for any setup, but the Type 200s were specifically made for ESK8, where higher-speed cruising and stability are a benefit. They have a 20 degree inclined double kingpin setup, however, unlike a traditional truck with double kingpins, these are designed to allow the steering knuckles to rotate independently. This aids with self-centering and gives you control over the toe, which can be used to make the setup very directional for high-speed cruising, or aid with turn-in to make it surfier. The steering weight is adjustable with a single screw on the back of the trucks, along with swappable "plugs", which also allows you to customize how surfy or snappy the response is, similar to adjusting bushings on a traditional truck.
The website covers most of this and also provides you with two tools for adjusting the toe. Definitely check those out when you get to that point!
A few tips for setting these up:
-We strongly recommend using the included angled riser pad, since this creates a positive mechanical trail, aiding stability, and something a traditional front truck cannot achieve.
-There are 3 different "plugs": A yellow one, which features a hybrid coil-spring plus polyurethane compound, which provides the most snappy return to center and also the most consistent steering feel while riding since the metal coil-spring doesn't soften with active carving. A red one, which is entirely polyurethane and very similar to the yellow one in terms of return to center, but has a slightly more surfy feel. A black one, which is also entirely polyurethane and the softest option, works well if you are looking for a very surfy setup.
-The toe is set from the factory at 0.25 degrees inward, which is fairly neutral but adds a slight amount of self-centering. We recommend adjusting this last after you've found the other settings that work for you. Adjustments can be performed with an 8mm open wrench, which is not included with our prototype units but will be with our production units.
-We're including a 3D printed Allen wrench that can be used for adjusting the steering weight screw on the back of the trucks. We're including it since adjustments on the steering weight screw can be challenging otherwise, once the trucks are on an ESK8 deck, depending on how close the battery pack is located behind the trucks. Since this tool is 3D printed please be gentle with it - our production tool will be die-cast aluminum, which is much stronger. If the 3D printed tool happens to break, a 10mm Allen wrench can be used.
-There are two sets of spacers included. These are meant for accommodating nearly every wheel on the market. They also provide a way of adjusting steering feedback. The wider spacers will increase steering weight and aid high-speed cruising, while narrower, or no spacers, will decrease steering weight and make the steering response more snappy.
어떤 설정에도 적합하지만, 타입 200s는 고속 순항과 안정성이 장점인 ESK8용으로 특별히 제작되었습니다. 그들은 20도 기울어진 더블 킹핀 설정을 가지고 있지만, 더블 킹핀을 가진 전통적인 트럭과는 달리, 이것들은 스티어링 너클이 독립적으로 회전할 수 있도록 설계되었다. 이 기능은 셀프 센터링을 지원하며 토우를 제어할 수 있어 고속 순항 시 설정을 매우 편리하게 하거나 턴인을 통해 토우를 더욱 서프하게 만들 수 있습니다. 스티어링 중량은 트럭 뒷면의 나사 하나와 교환 가능한 "플러그"로 조정할 수 있어 기존 트럭의 부싱 조정과 마찬가지로 응답 속도를 조절할 수 있습니다.
포함된 각진 라이저 패드를 사용하는 것이 좋습니다. 이렇게 하면 기계적 흔적이 뚜렷해지고 안정성이 향상되며 기존의 전면 트럭으로는 달성할 수 없는 것이 있기 때문입니다.
3가지 "플러그"가 있습니다. 노란색은 하이브리드 코일 스프링과 폴리우레탄 화합물이 특징이며, 이 화합물은 금속 코일 스프링이 활성 조각으로 부드러워지지 않기 때문에 중앙으로 가장 날렵한 회전이 가능하고 주행 중에 가장 일관된 스티어링 느낌을 제공합니다. 빨간색은 완전히 폴리우레탄이고 중앙으로 돌아오는 면에서 노란색과 매우 유사하지만 약간 더 파도타기 같은 느낌을 가지고 있습니다. 완전히 폴리우레탄이고 가장 부드러운 옵션인 검은색으로, 서핑을 잘 할 수 있는 설정을 찾고 있다면 잘 작동합니다.
토우는 공장에서 안쪽으로 0.25도로 설정되며, 이는 상당히 중립적이지만 약간의 셀프 센터링을 더합니다. 사용자에게 적합한 다른 설정을 찾은 후 마지막으로 이 설정을 조정하는 것이 좋습니다. 조정은 당사의 프로토타입 유닛에는 포함되지 않지만 당사 생산 유닛에는 포함되어 있는 8mm 오픈 렌치를 사용하여 수행할 수 있습니다.
트럭 뒷면의 스티어링 중량 나사를 조정하는 데 사용할 수 있는 3D 프린팅 알렌 렌치가 포함되어 있습니다. 배터리 팩이 트럭 뒤에 얼마나 가까이 위치하느냐에 따라 ESK8 데크에 장착되면 스티어링 중량 나사의 조정이 어려울 수 있기 때문에 여기에 포함되었습니다. 이 공구는 3D 프린팅이므로 부드럽게 처리해 주십시오. 당사 생산 공구는 훨씬 더 강력한 다이캐스트 알루미늄이 될 것입니다. 3D 프린팅 공구가 파손되는 경우 10mm 알렌 렌치를 사용할 수 있습니다.
두 세트의 스페이서가 포함되어 있습니다. 이것들은 시중에 나와 있는 거의 모든 바퀴를 수용하기 위한 것이다. 또한 조향 피드백을 조정하는 방법도 제공합니다. 스페이서가 넓을수록 스티어링 중량이 증가하고 고속 순항에도 도움이 되며, 스페이서가 좁아지거나 없어지면 스티어링 중량이 감소하고 스티어링 반응이 더욱 빨라집니다.