#138

[@KAMiJUINs]

This building was not easy because of the new way to make enclosures for the first time using the Aluminum plate. Certainly, it seems difficult to achieve satisfaction when trying for the first time. However, I hope you get the inspiration that you can do it in this way. The ESC (Focbox Unity +), High-performance motors, and motor pulley used in this video were supported by MASSIVE STATOR. massivestator.com/ 이번 빌드는 처음시도하는 엔클로저 제작방법때문에 쉽지않았습니다. 확실히 처음시도하는것에서는 만족을 얻기 힘든것 같습니다. 다만 이런방법으로도 제작할수 있다는 영감만 얻었으면 좋겠습니다. 비디오촬영에 사용된 ESC(Focbox unity +)와 하이퍼포먼스 모터, 모터풀리는 MASSIVE STATOR로부터 지원받았습니다. massivestator.com/

[@macncheez1212]

I know its expensive but you could always get a commercial 3D printer to make the housings. Carbon Fiber Nylon with anti static would get the job done I think. Not sure of impact resistance. Might make future projects quicker and give you more size and location options. I plan on printing a board(CF PEEK) on mine in June. (work too much.)

[@karlstern7877]

Incredible work, I especially liked the deck, and enclosure fabrication. Curious if the aluminum esc housing will cause connectivity issues though.

[@benofficial.0]

i am making one with the 13 inch flipssky trucks , but am using chains instead of belts , great job on the deck looks amazing

[@Jason-TheChad-Muska_circa1995]

@@benofficial.0 may I ask why the chains instead of belts

[@benofficial.0]

@@Jason-TheChad-Muska_circa1995 belts kept ripping and slipping from rocks and water i couldn't get 50 miles out of a belt before it wore out or broke , my chains are still going strong

[@lorcosgarage9443]

legend says its still on the shelf...

[@eBoard3R]

*Yes, yes those SUPER wide DKP trucks with that "future board" deck as I call it.* Ever since I found out Flipsky make wider DKP I have been waitin to get closer looks and builds, thank you... with street wheels and beautiful motors, I enjoyed this one a lot! I prefer 8mm axle though for convenience but I can accept 10mm has its purpose. Those motors are 🤩 Those close up shots at the end were stunning. Such a beautiful build, trucks looks so wide though. Lookin forward to the ride footage. Another great video. ⚡👏🏼👏🏼⚡

[@KAMiJUINs]

Thanks as always for the comments that you leave after watching the video in detail :) And it's worth making videos because of subscribers like you, Brother lol.~

[@sethmcneill5283]

You should definitely create your own custom board building business. People would pay you lots of money! All your projects work well and they are so unique looking. Congratulations for your channel success.

[@KAMiJUINs]

Thank you so much for saying that :) But I think it can be fun because it is a hobby. And it's not easy to make the same number of boards that I made by DIY.

[@mcmbass]

Clicked the "like" bottom after 30secs of the video. The craftsmanship here is 👌🏾

[@KAMiJUINs]

Thank you for watching~ :)

[@TheShazstar]

Your videos are so satisfying to watch. Another great build. Let me know when you come to the UK. We can take you on a ride through London

[@KAMiJUINs]

Thank you for coming and watching, mate :) I used to live in London. So I'm going to go again someday. See you then.~

[@WillConroy1]

Incredible work man, looks amazing 🙌🏼 A very clean build. Can't wait to see the video of you riding it!

[@KAMiJUINs]

Thank you for coming and watching mate :)

[@craftycraff7938]

It would be great to see your ride these boards after you’ve built them!

[@KAMiJUINs]

It will be ~ Thank you for watching :)

[@Casper-sb7gm]

That’s dope, sick E-board

[@KAMiJUINs]

Thank you for watching it too :)

[@knowledgebyte]

Lovely workmanship. Well done.

[@KAMiJUINs]

Thank you for saying that and watching :)

[@MadDonJuan]

You are the true, DIY Legend Bro!

[@KAMiJUINs]

Thank you for saying that and watching, brother~ :)

[@kenschulman-specializedend6061]

Nice!..Man, yr craftsmanship and attention to details are progressing more n more.

[@KAMiJUINs]

I also think it's gotten a bit better than before lol :) Thank you for watching~

[@Tyneeboard]

Looks pretty good! Your DIY board is great KAMi！

[@KAMiJUINs]

Hi, friend :) Thank you for coming and watching~ Hope you good as well~

[@infiniteoffset]

Those motors are looking good.

[@KAMiJUINs]

Thank you for watching as always~ :)

[@manfrombkk]

Everything you do is Pure Art (and fab as well)

[@KAMiJUINs]

Do you think so??? HaHa~ Thank you so much :)

[@craftycraff7938]

I would love to see review the Propel Endeavor Pro.

[@KAMiJUINs]

I wish I could get a review sponsorship from there, too :)

[@joecoco83]

Now you just have to send me in France !!😁😁😁 Thanks

[@KAMiJUINs]

Okay. My PayPal account...lol :) Thank you for watching for a long time~ Merci.~

[@dyb6916]

저 데크 만드는 영상 이전부터 봤었는데 얼마 된거 같지 않은데도 벌써 3년이라는 시간이 흘렀다는게 신기하네요 ㅎㅎㅎ 영상 꾸준히 잘 챙겨보고 있습니다 이번 친구도 기대가 되네요 !

[@KAMiJUINs]

네 벌써 3년이란 시간이 지났네요 ㅋ 항상 시청해 주셔서 감사합니다 :)

[@ryan.2327]

Amazing work on the enclosures.

[@KAMiJUINs]

Thank you for watching :)

[@parioceanchicago]

Man, it always seems so easy, it's beautiful. Thank you!

[@KAMiJUINs]

Yeah! Only in the video. HaHa~ Thank you so much as always :)

[@boredCoy]

Massive stator is the former Enertion. Look up that company and its history.

[@dontlike7399]

My first thought also. There's some people you shouldn't deal with, i guess.

[@johnglover4318]

I look forward to seeing the ride footage and tests of this cool board.

[@KAMiJUINs]

It will be ~ and Thank you for watching :)

[@S62Uce]

Clean build you make it look so easy 👏😂

[@KAMiJUINs]

yeah, only in the video ~ :)

[@홍성운-v6j]

설명 감사드려요 저한테는 보드가 생계수단이라서 스스로 해보려고 했는데,, 아무래도 혼자서는 못할것 같네요 ㅠㅜ

[@B0A2]

Excellent build love the board

[@KAMiJUINs]

Thank you for watching :)

[@SteveThompson-li2fc]

Fantastic job.

[@KAMiJUINs]

Thank you for watching :)

[@tgr3875]

Please describe what you need for the electric skateboard, such as motor, wheels, etc. Thank you in advance. 

[@Jmaz1234]

That was beautiful.

[@KAMiJUINs]

Thank you for watching ~ :)

[@begg3495]

Amazing work!

[@KAMiJUINs]

Thank you for watching :)

[@nineeast8730]

Great deck. Great board.

[@KAMiJUINs]

Thank you for watching my videos~ :)

[@NoLimitstoRide...]

Top DIY board KAMI

[@KAMiJUINs]

Hi, Brother :) Thank you for coming and watching ~

[@FlipskyTech]

Nice and clear video of diy esk8, love it🤙

[@KAMiJUINs]

Thank you for coming ~ :)

[@ratheonhudson3311]

I was holding my breath until I saw the Kami sticker, hehe. This is a Kami approved board! I always love your builds and showcases of issues you faced, like the need for the long bolts.

[@KAMiJUINs]

Haha :) Thank you for watching bro~

[@planckstudios]

Handsome board. Those wheels pop against the wood. I combine a lot of aluminum and wood - you can finish the aluminum w/out much effort - scotch brite pads help dull the surface, but harder to get those larger sections finished consistently. Either way, great to see you using aluminum in the builds. excited to see it on future boards

[@KAMiJUINs]

Thank you for your comment and watching :)

[@Michaelajacksonfilms]

Thank you

[@KAMiJUINs]

Thank you for watching too :)

[@Mist3Rray]

Another SiK Build! did you use spacers in between the bearings? if so where can you buy them?

[@KAMiJUINs]

I didn't use the spacers. but it works well. If you want to buy it, you can find it easily search for an internal diameter of 10mm spacer. Thanks~ :)

[@joec1324]

Wow that's a very beautiful e-skate ✨

[@KAMiJUINs]

Thank you for watching :)

[@joelin4676]

Great job! And nice recording equipment, the deck still looks amazing after 3 years.

[@KAMiJUINs]

Thank you for watching for a long time~ :)

[@Mac_N_Cheez]

Thanks for the videos and creative efforts. Sick builds.

[@KAMiJUINs]

Thank you for watching too :)

[@ryanschulz9893]

great video cant wait to see how it performs

[@KAMiJUINs]

Thank you for watching :) haha, But don't look forward to it too much lol~

[@linaandersson5815]

Fantastic! Should perform amazing. I have a question about the Tynee Ultra. Tynee sells DKP trucks. Do you think you can modify the Ultra and put those trucks on it? Would be great with a fairly strong lite board with DKP trucks. I look forward to ride footage of this DIY board. Thanks

[@KAMiJUINs]

Thank you for watching :) And Structurally, I think it will be possible. But one thing I'm worried about is that if Ultra's motor wire length is not enough, it won't be easy to put the motor behind the truck. You should check it first.

[@linaandersson5815]

@@KAMiJUINs Ah, yes. That makes sense. Hope I can ask you more questions in the future because you sure seem to have knowledge and have tried so many things. Thank you

[@sullivandamn]

Those look pretty close to the hurricanes trucks. Think I could switch them out? Looking for something with 10mm axles anyways!

[@KAMiJUINs]

If you have a couple of tools, it doesn't seem impossible to change. And this truck has 10mm axles. Thank you for watching :)

[@srqTagle]

Man that is beautiful!

[@KAMiJUINs]

Thank you for watching :)

[@tonystark-hu3om]

dang man! You're crazy!! Love your vids.

[@KAMiJUINs]

Thank you for loving my videos~ :)

[@홍성운-v6j]

우리나라에 있어주셔서 감사합니다 😀

[@KAMiJUINs]

별말씀을요 :) 저야 말로 시청과 댓글 감사합니다~

[@RanRc25]

Great video!

[@KAMiJUINs]

Thank you for watching~ :)

[@VicenteOrduna31]

Simple and Magnificent.! Mr.KAMI-san, which do u preferred most in riding about overall aspects, a HUB board or a Belt Driven board.?

[@KAMiJUINs]

Thank you for watching :) And I still prefer belt drives.

[@jb_terahertz]

So good!!!!! 🔥🔥🔥🔥

[@KAMiJUINs]

Thank you for watching :)

[@josediaz6246]

Hey you should try to make a custom board using parts from like backfire or meepo for people who are new to diy I think that would be a cool idea to use the motor and esc from backfire but with good batteries and better deck

[@KAMiJUINs]

Thank you for watching ~

[@badrinair]

beautiful work of art. Love it .. All the parts together would it have cost more than $500 ?

[@KAMiJUINs]

Thank you for watching :) I think... more than $1500 :(

[@badrinair]

@@KAMiJUINs definitely looks to be more than $1500 . amazing quality and finish. I respect your craftsmanship .

[@tlewis3083]

Thanks for the build. Have you had the opportunity to run the x55 motors from massive stator? I have the bound flash and was wondering what the difference would be between those custom motor from massive stator and the stock motors on my bound flash. Let me know what you think.

[@KAMiJUINs]

First of all, the output of the two motors is different. The motor output of the flash is 1500w, while the motor used this time has an output of up to 4000W. Therefore, if the discharge rate of the battery and the output of the ESC support each other, a much stronger torque may be generated. Although the motor size is similar, the difference in output can be seen as the difference between the magnet constituting the motor, the mass of copper wire, and the number of poles. Thanks~

[@worachart111]

Good job !

[@KAMiJUINs]

Thank you brother~ :)

[@ujung5683]

So cool👍❤️‍🔥😍🌟🤩🐶

[@KAMiJUINs]

Thank you so much :) hahaha~

[@AbosoluteAltitudes]

Your builds have a nice artistic touch to them, I’m always impressed. I’m getting ready to finish my 5th board; got all the parts except a battery. Just been putting it off as I have an ACL injury that getting fixed in 10 days.

[@KAMiJUINs]

Thank you for saying that and I hope your 5th board builds well :)

[@johnpaulbelleza7430]

I miss watching your videos

[@KAMiJUINs]

Aren't you watching? Haha Thanks~

[@johnpaulbelleza7430]

@@KAMiJUINs I haven't watched your videos for several months haha. But I'm still updated in your ig account

[@p0kemon4]

How are the trucks at high speeds? Do they wobble at all?

[@KAMiJUINs]

I haven't ridden it yet. You'll see it in the next video~ Thanks :)

[@_Zer0202]

Very good bro, I love the shape and the materials 👏 💪 😊🤙

[@KAMiJUINs]

Thank you so much as always brother :) To be honest, I'm not satisfied with the aluminum enclosure so far lol~.

[@albertrobinson6018]

Been watching and admiring your bills for quite a few years now. That deck you just feel it looks really sick no concave? I've been experimenting with epoxy and hardwood skateboard shapes with concave.

[@KAMiJUINs]

Please, show it to me when you're done~ :)

[@davidmiller4758]

I'm curious, where do you buy your batteries?I'm trying to find a 12s4p that can go 30 miles range and also output a consistent discharge of 80 amps? I can't seem to find that kind of amps anywhere

[@KAMiJUINs]

I used is 12s5p. This pack uses cells with a discharge rate of 10C. The link information is in the description box, check it.

[@davidmiller4758]

@@KAMiJUINs shame the site doesn't give the specs like size of the battery, I know my new torque board will fit a 12s4 depending on it's configuration. If it's 10amps a cell, and it's a 12s4 does that mean it can do 80 amps continuously? How many cells are in a 12s4? I'm new to diy and this is my first build, your videos are my inspiration lol

[@홍성운-v6j]

여쭤볼곳이 이곳뿐이라서 댓글로 물어봅니다.. 어찌어찌 모터를 새걸로 구매해서 교체했는데, 어느쪽인지 모르지만 처음엔 괜찮더니, 또다시 리모컨에서 과전류가 뜨는데, 어디서 과전류가 나는지 확인하는 방법이 있을까요? 아니면 보밧을 달았는데 그게 과전류의 문제가 될수 있나요?

[@KAMiJUINs]

복합적인 문제로 보입니다. 사용하고계신 보드의 ESC는 이미 출력값이 정해저있는 프로그램드 ESC입니다. 또한 보조배터리를 정확하게 장착하려면 원래 장착되어있는 보드의 배터리와 동일한 셀과 구성방식으로 해야합니다. 만약 이것이 달라질경우 배터리팩의 방전율이 서로 달라지게됩니다. 방전율이 높은쪽의 배터리가 ESC가 갖은 출력값보다 높은 방전율로 전류를 밀어내서일수도 있고, 또한 방전율은 병렬형태일때 증가가 되는데 보조 배터리를 달았던것 자체로 기존배터리와 상호작용을 일으켜 ESC가 허용하는 방전율을 초과했을수도 있습니다. 보통 보조 배터리를 달 경우 VESC나 프로그램을 할수 있는 오픈소스 ESC는 그에 맞게 재설정을 할수 있지만 사용하시는 기종은 그것이 불가능하다보니 과전류로 이어지는것 같습니다. 한가지 더 말씀드리면 그런 불안정한 배터리 상태에서는 화재 발생이 일어날 가능성이 높으니 빠른 조취를 취하셔야 할것 같습니다.

[@davidmiller4758]

It's as if you just have all these exotic pieces and parts just laying around

[@davidmiller4758]

@whatsapp₊₁₍₆₁₀₎₂₄₉₄₀₉₉ ??

[@emil5126]

what did ytou use to hold the motor cables that neatly?

[@KAMiJUINs]

It was kind of cable holders

[@Hilboy98]

I need electric skateboard Whare can I buy …?

[@ddownbond]

Here, just take my money. 💰🤠

[@KAMiJUINs]

Thank you for watching :)

[@alexgarza5398]

hey! have you ever tried building something like Propel Endeavor Pro? I would love to see it if you could attempt or put your own spin on it!!

[@KAMiJUINs]

Well, it won't be easy to get a suspension truck and the drive system. But if I have a chance, I can do it someday. Thank you for watching~ :)

[@alexgarza5398]

@@KAMiJUINs good luck thank you!!!

[@steveshot81]

You could use an aluminum bender but it's big

[@KAMiJUINs]

And it's too expensive to buy to use it once or twice! x_x Thank you for watching :)

[@angelofasanaro1584]

Easy buying it

[@shmeet]

____________________Doesn't the battery put off heat that needs ventilating?

[@KAMiJUINs]

It doesn't use that much high output.

[@xJayteee]

Hey , with the current Vesc technology , there seems to be more and more vescs with higher voltage tolerances , would you build a board or with your current boards with higher voltages ? E.G , 48volts or 60 volts ? As i'd really like to see what speeds it'll achieve and how it affects the riding .

[@KAMiJUINs]

Thank you for watching~ This board is a 48-volt setup. And it can reach faster speed with a higher battery setup and ESC output support.

[@xJayteee]

@@KAMiJUINs Would you try more voltage builds ? like 60v , 72v. Those are in electric scooter/ebike territory but would really love to see it in a Esk8 . Trampa makes 100v Vescs .

[@MichaelHurdleStudio]

I had to jit that sub button after watching this video. Grea work.

[@KAMiJUINs]

Thank you for watching ~

[@jetthepanda]

Your builds are always amazing! Jealous of the amount of eboards you have!

[@KAMiJUINs]

Thank you for saying that and watching :)

[@d3vill3ath3r]

How strong is the board doing this type of construction?

[@KAMiJUINs]

I don't think it will be able to withstand more than 100 Kg

[@d3vill3ath3r]

Thank you, I think that's plenty and amazing build!

[@troywissenbach6242]

I’m curious, what was the total cost with this build?

[@KAMiJUINs]

The answer of that is shown in the next video. #139 Thanks~

[@sidneyeramil974]

What are your thoughts on the motor? I am interested in building my own DIY Esk8 board for under $1200 US.

[@KAMiJUINs]

The motor was good enough. But to use it more universally(off-road), I think the larger one would be better than this. massivestator.com/collections/electric-skateboard-motors/products/titan-x84-electric-skateboard-motor

[@greensocket3583]

Doesn't the Focbox get warm in that enclosure?

[@KAMiJUINs]

It was not edited, but the lower part of the rubber part of the ESC enclosure was cut off. As a result, the aluminum in the ESC enclosure itself became a huge heat sink. This part will be mentioned in the next video. Thank you for watching~

[@greensocket3583]

@@KAMiJUINs Is that deck 12mm plywood?

[@KAMiJUINs]

Yeah!!!

[@arielvargas2446]

Where do you get your "Helmet Police" stickers? I wanna put one on my nephew's skateboard as a joke

[@KAMiJUINs]

It received a prototype from a protective equipment company called LazyRolling. It's not available because it's not officially released. lazyrolling.com/

[@johnfaustus1]

Takeaway for me: those are some awesome work gloves from 3M - what are they?

[@KAMiJUINs]

I'm not sure what the exact name of the glove is

[@johnfaustus1]

@@KAMiJUINs Found them: 3M Super Grip 200, Nitrile Coated Work Gloves....unfortunately, 3M only distributes them in Korea :(

[@srqTagle]

What do you est the total cost of materials to build in US dollars for that board?

[@KAMiJUINs]

I don't think I'll know for sure. There's a link to the parts in the explanation box, so please refer to it. Thanks :)

[@pixel6173]

the next video he posts will likely be the test ride. he usually puts the total cost of the board in that video

[@user-1734]

Здравствуйте у вас очень красиво получилось доска можете сказать из какой фанеры вы его делали я тоже хочу зделать красивую доску

[@KAMiJUINs]

Спасибо за просмотр. Я использовал 12 мм толщиной плиткой березы~ :)

[@user-1734]

@@KAMiJUINs спасибо большое за ответ вы первый человек который привел меня к индустрии електроскейта спасибо вам ещё раз

[@philipgreer]

Do you have a shop in Korea?

[@KAMiJUINs]

I don't have any shops, online too.

[@philipgreer]

@@KAMiJUINs Your DIY builds are so good that I thought maybe you had a store. Love the work!

[@savekillqqpsounds8473]

i fcking love the deck ngl

[@KAMiJUINs]

Thank you for watching~ :)

[@umarrauf9331]

why do all the youtubers doing DIY have a full factory to make a board in there house !!

[@jeanprofite8339]

👍

[@KAMiJUINs]

Thanks~ :)

[@oreomarina1773]

Máster muy lindo

[@KAMiJUINs]

Gracias por ver :)

[@Sensei.All.Mighty]

Hello brother. I love you 🖤🖤............ .............................................................. Is there any giveaway actually I need one🥺🥺.

[@Nashcaster]

That deck….

[@Zorromlj]

Hello, I can study another electric scooter with you. Do you think it's okay? It belongs to cooperation.

[@rehankhan_art]

wow

[@KAMiJUINs]

Thank you for watching :)

[@InfiltrateIndustries]

Longboards are skateboards, but all skateboards are not longboards. Important part was longboard. This video has only a longboard

[@shredgod6394]

I can buy a board for the cost of the battery 😅

[@tgr3875]

Best video and build ever, Bro pls help my skaerboard ok?

[@jeromemalinge4572]

Whoa! Awesome! You got a new subscriber. I built my first one and posted a video. Unfortunately, not even close to your "stuff" 👍

[@KAMiJUINs]

Thank you for watching :) and i hope you to build one as you want~

[@Rishu44243]

I want it bro

[@KAMiJUINs]

Thank you for watching, bro :)

[@rickertmork8997]

Want a board that actually turns? Get smaller trucks.

[@KAMiJUINs]

I'm trying new things, not wanting a practical and proven board. Thanks~

[@manstone0908]

Côol

[@KAMiJUINs]

Thank you for watching :)

[@maxheadroom7214]

If you needed to double stack the deck that just proves that the deck you made is garbage. Seriously unimpressed.

[@Zorromlj]

👍