12x24 Shed Build Part 1

I moved to a new house and needed to get my wood shop set up. I knew I needed more floor space so decided to build a 12x24 foot shed. I did the math and discovered I can save many thousand dollars by doing it myself. I designed it all on sketch up and the plans are available in the link below. I also bought some new tools for this project that worked out great! The Wen Track saw and Wen Roofing nailer were awesome! Not to mention the most cost effective option on amazon. Links are below.
Build Plans can be found on my website.
keimpiece.com/
$5 Donation Link
If you’d like to support my business you can make a donation here
keimpiece.com/collections/bui...
TOOLS USED ON SHED BUILD
Wen Track Saw | amzn.to/3K41tRf
PowerTec Track for Track Saw | amzn.to/3KafP2f
Wen Roofing Nailer | amzn.to/3I1l4Qb
Nails for NuMax Nailer | amzn.to/3qrLXa2
NuMax Framing Nailer | amzn.to/3A4l9jd
Hinges (I used 3 hinges on each door,
each door weight 100lbs) | amzn.to/3norelo
Door Hardware | amzn.to/3GumYZ0
Locking Door Handles | amzn.to/3rkN9uO
Cordless Paint Sprayer | amzn.to/3zV8bnY
MUST HAVE TOOLS
Milwaukee M18 Fuel | amzn.to/3eoRGYu
DeWalt Cordless Sander | amzn.to/3v8WE1C
DeWalt 13 in Planer | amzn.to/30r0K6X
Chisel Set Stanley | amzn.to/2PNy7Pn
DeWalt Tool Kit | amzn.to/38qPOL7
Table Saw Blade | amzn.to/30o8RkG
Milwaukee Cordless Hack Saw | amzn.to/3v7NaDw
CR10 3D Printer | amzn.to/3l03iSZ
Hatchbox 3D Filament | amzn.to/3cjp5kL
CNC / ROUTER
1/2 in Up Cut Router Bit | amzn.to/3enVA3G
1/8 in Up Cut End Mill Router Bit | amzn.to/2Og5GsT
1/4 in Down Cut End Mill Router Bit | amzn.to/30EXF3m
1/4 Flush Cut Down Cut Router Bit | amzn.to/30CApmm
MUST HAVE GEAR / ITEMS
LED Garage Lights | amzn.to/3v5iGSK
Combo Square | amzn.to/3bvLhck
T-Track | amzn.to/2OiIdr5
Digital Calipers | amzn.to/30ohbAY
Blue Tooth Ear Protection | amzn.to/3bsNWDi
WOOD STAINS AND FINISHES
Minwax Polycrylic Finish | amzn.to/3buQIbq
Minwax Spray Lacquer | amzn.to/2N6OyFy
Minwax Can Lacquer | amzn.to/3tgn1Rx
Shellac | amzn.to/3emO4Gz
Red Flag Stain | amzn.to/3quYnuv
Blue Flag Stain | amzn.to/3rxNvx4
Minwax Black Stain | amzn.to/30s4g16
Minwax Early American Stain | amzn.to/30txGeZ
As an Amazon Associate I earn from qualifying purchases.
Music is royalty free

[@KeimpieceCarpentry]

If you liked this build video you'll love this Gazebo I built myself. kzbin.info/www/bejne/n5qxiYh4Z6aAi8U

[@user-rd4xj2ei1l]

Everyone's a beginner when they start..

[@mohhassen8857]

This is a good book. Does provide a step by step introduction to how to build things kzbin.infoUgkxhgbP-6hUnXu_QRaoHgLztgsI0YF3HqR0 , also does offer some steps. Includes pictures to give you ideas for layouts and such. If you are looking for a guide, this is not exactly what you want. But if you are trying to familiarize yourself with the way that pole barn building and other out buildings, are made, then this will work just as you need it to. A few things in this book are a barn (of course), detached garage, storage building, and coops.

[@KeimpieceCarpentry]

Yes, a shed is water proof

[@khyron6]

Here is a little tip. When you make the framing for the floor. Get some cheap, The cheaper the better, Powered Detergent mix it up thick like it is paint. Paint the frame with it. It makes it termite proof, and rot resistant, Plus the shed will smell good. Good job thanks.

[@jasondale4101]

Great tip! I will do that for my next project

[@sunburnedbeachfeet1128]

What is powered detergent?

[@gabrielcolon5245]

@@sunburnedbeachfeet1128 powdered laundry detergent.

[@dellasmith6583]

Powdered.

[@mr.c6674]

@@sunburnedbeachfeet1128, not liquid

[@johnzimmerman6516]

I love how all of these DIY shed builds are showing up on KZbin! Imagine building your own house. It’s just putting several of these different shaped sheds/buildings together. Not impossible, but just takes a little extra planning. Thanks for posting. You did a great job!

[@KeimpieceCarpentry]

Thanks! Glad you enjoyed the video

[@orlandojohnson5742]

I agree with you! I’ve been watching a few periodically! I helped my dad build a shed yrs ago! It wasn’t big enough unfortunately! ?!10x10!? I wished we built this size or bigger! 20x20 lol!!!! A small shed fills up quickly!

[@KeimpieceCarpentry]

just build another!@@orlandojohnson5742

[@Bird-wz7nx]

And a much better foundation than this, too. This setup is ok for a shed on flat ground away from significant water, but you gotta do your research on what you're sticking your home on!

[@KeimpieceCarpentry]

agreed, I definitely chose the easy cheap way for the foundation. @@Bird-wz7nx

[@thehikingrealtor6812]

You made this look doable to people like me who would likely need a whole lot of help to pull this off. Great filming too.

[@KeimpieceCarpentry]

Thanks for watching. You can do it!!!

[@travelteam89]

All you need is the tools and wood!

[@KeimpieceCarpentry]

That's right!@@travelteam89

[@the-gaming-show]

@@KeimpieceCarpentry Do you have plans for this build? I would love to make this my summer project.

[@KeimpieceCarpentry]

@@the-gaming-show I sure do, go check out the video description, there is a link to my website

[@lachainem]

Great video. I love the editing and how you showed the steps you took in building the shed. I have to rebuild mine and after watching your video, I can't wait to get started.

[@KeimpieceCarpentry]

I'm glad you liked it and hope it makes your project a bit easier

[@cjmst3k]

Best shed video! Best DIY summary in general! Just straight up doing it, start to finish. No real questions to ask afterwards. Makes me think I can do this now, and which order to start in. Thanks!

[@KeimpieceCarpentry]

Thanks! You can do it! Plans are available if needed

[@bbsal4031]

We have a 26x40 foundation that we want to build on. We have to do it ourselves because hiring it done is too expensive. Videos like this are perfect hopefully we can do it.

[@KeimpieceCarpentry]

@@bbsal4031 Thanks! Good luck

[@thomasfairbanks6194]

Curious if you regret not putting a vapor barrier down. I did a feed room and forgot to and the advantech got soft after a few years. Good build, though. Useful video. Thanks.

[@KeimpieceCarpentry]

@@thomasfairbanks6194 If I was to go back and do it again I would probably make a better foundation, I'm sure a vapor barrier would be part of that.

[@DiscreetHustle]

Good sound quality, a quick square, hammer and nails, plus some elbow grease, can't beat thst❤

[@KeimpieceCarpentry]

Thanks for watching, you'll probably like some of my other videos, check them out

[@bybryanwhite]

Great job! You take good care of your family. Your dogs hovered around all the time.

[@KeimpieceCarpentry]

Thanks for the kind words.

[@HAL-dm1eh]

I've been watching a lot of shed building videos and didn't really have to watch this one but it was no problem anyway even with my attention deficit. So many people love to hear themselves talk for 20 mins to explain one simple thing or put obnoxious music on there, or sometimes even both! This was really nice. Thanks for sharing.

[@KeimpieceCarpentry]

Thanks for the feed back !

[@chuckmaxon3727]

Looks great, looking forward to part 2

[@KeimpieceCarpentry]

Thanks! Part two will be electrical, soffit, and trim.

[@gfysyoutube]

Absolutely amazing! I wish I could tackle this. You made it look so doable. Great work!

[@KeimpieceCarpentry]

Thanks for watching, you can tackle a project like this no problem. Check out my gazebo video too and let me know what you think

[@rochim.1192]

Excellent work! Just what I need to build my she shed!

[@KeimpieceCarpentry]

Thanks Rochi, I have plans available if that will help with your project. Check the link in the description

[@bradbonnema5979]

ALWAYS stagger flooring!!! Makes it much, much stronger.

[@KeimpieceCarpentry]

yep

[@hockeygoon8649]

I grew up building cabinets and I have not done any wood working in 15 plus years. This makes me wanna get back into it and build something I can live in.

[@KeimpieceCarpentry]

Do it!!!!! There are plans available. This was only my second shed I've built. So I'm excited to build my third!

[@marklowe7431]

This was calming to watch. Love timber construction and furniture. Learned a lot just from watching too. Thanks. The professionalism is so evident. Make this look so easy.

[@KeimpieceCarpentry]

Thanks Mark, stay tuned, I'll be building a huge timber framed gazebo in my hard shortly.

[@oneofgodschildren]

I didn't see him use a level did you?

[@KeimpieceCarpentry]

@@oneofgodschildren You must not have been paying attention Julie, within the first ten seconds of the video you see me using a laser level to ensure my foundation blocks are all the same height.

[@stevenoverton6329]

It's nice to see a proper overhang so many people don't and it looks unfinished and I worry about moisture in the wall good job. Building an addition next summer 😊

[@KeimpieceCarpentry]

thanks for watching, let me know what you think of my other videos

[@seldomseenranch2515]

Holy Molly ... awesome one Man show! Love it! Gives me a lot of confidence here for my add-on to built all by myself!! Very nice!

[@KeimpieceCarpentry]

thanks for watching! Have you seen the gazebo video I just posted, built that alone too

[@larryb131]

Even in time lapse this is a really good video! Thank you for this!

[@KeimpieceCarpentry]

thanks for watching Larry, I bet you would like my Gazebo Build video

[@HomesteadingTexas]

Thank you. I learned a lot watching you build this awesome project.

[@KeimpieceCarpentry]

Thanks for watching Julie

[@pamricgdt]

Excellent, nice technique, your craftsmanship shows!

[@KeimpieceCarpentry]

Thanks for watching, be sure to check out my other videos

[@TheJmeech]

Great work! Looking forward to more build videos

[@KeimpieceCarpentry]

Thanks! I have a work bench assembly table video that will be posted soon! Working on part 2 for the shed as well.

[@ryandubyah2345]

Great job!! I was glued to the screen the whole way through and that’s no easy task, lol!

[@KeimpieceCarpentry]

Thanks Ryan that means a lot. I'm glad you liked it. Don't forget to watch part 2. You'll probably really enjoy my Gazebo build video too. Check it out.

[@pierrealbar1665]

It seems to be so easy. Just a clever mind and few tools. Thank you very much

[@KeimpieceCarpentry]

Thanks Pierre

[@NYAJoeJr]

This was a very satisfying build to watch. Very nice work.

[@KeimpieceCarpentry]

Thanks Joe!

[@edgarparedes6554]

It's a beautiful house, I want to build a bigger one in the future, I love this style of houses

[@KeimpieceCarpentry]

Thanks for watching, let me know what you think of my other videos

[@qwertyuiop-ke7fs]

Thanks for the plans. Hope to build it before winter comes

[@KeimpieceCarpentry]

Let me know how it goes!

[@michaelpomante7051]

A Class Act!!! You could build for me ANYTIME!!! Kudos Sir!!!

[@KeimpieceCarpentry]

Thanks for the kind words Michael!

[@AlexAlex-zn9lf]

One of the best shed building vids I’ve seen , it’s simple build and looks nice awesome job man !

[@KeimpieceCarpentry]

Thanks Alex!

[@seekhimwithallyourheartand3358]

Repent to Jesus Christ “no weapon forged against you will prevail, and you will refute every tongue that accuses you. This is the heritage of the servants of the Lord, and this is their vindication from me,” declares the Lord.” ‭‭Isaiah‬ ‭54:17‬ ‭NIV‬‬

[@boonyyramirez3154]

@@KeimpieceCarpentry mooomp

[@KeimpieceCarpentry]

@@boonyyramirez3154 yes mooomp indeed

[@AbdurRahman-ui6ih]

Absolutely Beautiful!!!! “I love it when a plan comes together!” Great work and thanks for sharing👍🏽

[@KeimpieceCarpentry]

Thanks for watching. Wait until you see the next video I'm about to post!

[@usaSAVAGE]

I also want to say i like the neighbor friendly fence. Good job! You put thought into your work.

[@KeimpieceCarpentry]

Thanks Savage!

[@piratetaylor29]

Thank you. You're an inspiration! Talk about a one man job. Yikes, that was incredible. 👍🏻🇺🇸

[@KeimpieceCarpentry]

Glad you enjoyed it

[@JLWoodArtistries]

Great job. That’s looking really nice. I’m excited for Part 2. Great work.

[@KeimpieceCarpentry]

Thanks! Working on it.

[@miguelsantiago1174]

When the apocalypse is here I'm coming to get you man. Great work! 👍🏼

[@KeimpieceCarpentry]

Thanks! Maybe my next video will be an underground bunker.

[@familyguy5081]

Very cool... Looking forward to part 2

[@KeimpieceCarpentry]

Working on it now. Electrical is all done, just waiting for the time to finish up the soffit and trim

[@jasonmathews1685]

Great craftsmanship.. Fun to watch

[@KeimpieceCarpentry]

Thanks Jason, glad you enjoyed it. Be on the lookout for my next project. It's going to be a huge custom built timber framed gazebo with pergola over hangs. Sitting on a big paver patio!

[@wcmacster]

Amazing sir. That’s one of my goals, is to make a shed all by myself.

[@KeimpieceCarpentry]

starting off with a set of build plans help, you can find my in the link in the description

[@Chris_at_Home]

Great build. I like that you put proper ventilation under the roof. Most of the sheds that people get delivered don’t allow for this and also have minimal overhang. I see people converting many sheds to tiny houses without regard to moisture escaping under the roof.

[@KeimpieceCarpentry]

Thanks Chris, I have my CNC and laser in there on one half then a gym on the other so I def need good ventilation. Part two will be installing vented soffits and electrical.

[@Chris_at_Home]

@@KeimpieceCarpentry I’m just finishing a duplex that has a nine year project so far. One more year.

[@KeimpieceCarpentry]

@@Chris_at_Home Maybe that'll be my next project

[@seekhimwithallyourheartand3358]

Repent to Jesus Christ “no weapon forged against you will prevail, and you will refute every tongue that accuses you. This is the heritage of the servants of the Lord, and this is their vindication from me,” declares the Lord.” ‭‭Isaiah‬ ‭54:17‬ ‭NIV‬‬ O

[@bobbygetsbanned6049]

I see people building tiny houses out of sheds on shed foundations...

[@MunirLoyed]

amazing work!

[@dc5duben96]

thanks for posting, this video helps show me the what is needed to build a shed

[@KeimpieceCarpentry]

I'm glad you like it!

[@bbsal4031]

I think you did a fantastic job. I wish I had those skills.

[@KeimpieceCarpentry]

Thanks for the kind words

[@hairrus7278]

Nothing better than a man with carpentry skills.

[@KeimpieceCarpentry]

I like to think so

[@chrismoe4120]

This is like asmr for me. Great build cant wait for part 2.

[@KeimpieceCarpentry]

Thank Chris. Part two will be electrical, soffit, and trim.

[@MrSteeDoo]

Very nice work. I like the way you applied the siding on the gable end and then put the ladder eave on top of that. Much cleaner look.

[@KeimpieceCarpentry]

Thanks for watching! Let me know what you think of my other videos

[@WolvieVT]

This is beyond impressive… building a 18x14 shed now and use this almost daily

[@KeimpieceCarpentry]

Good to hear Chad

[@ApolloCDI]

Late reply but what plans are you using? Did you buy his?

[@bobharveythercanddiyguy22]

Looks good! You are giving me lots of ideas for my shed! Thanks!

[@KeimpieceCarpentry]

Good I'm glad. Let me know how it turns out. Plans are available here if you need a good starting point. keimpiece.com/collections/build-plans-digital-files/products/12x24-shed-build-plans

[@davepayne2024]

Glorious work!!!

[@KeimpieceCarpentry]

Thanks Dave!

[@kevincrain7499]

One of the best skills to have forever, being able to build. Great video thank you.

[@KeimpieceCarpentry]

Thanks for watching Kevin. Check out my other videos, I bet you'll like the gazebo and treehouse one.

[@allenlane5000]

Excellent job on the shed and the video. Thanks for posting. Short, sweet and very informative without a dude talking for hours.

[@KeimpieceCarpentry]

Glad you liked it Allen. Wait until you see my next video. It's going to be a timber framed gazebo on a paver patio

[@ArturoMendezC]

gran trabajo, se nota que lo disfrutas saludos desde Mexico

[@KeimpieceCarpentry]

gracias por las palabras amables

[@rodneyking940]

Nice build brother I could definitely use you in my business great work and craftsmanship

[@KeimpieceCarpentry]

Thanks for the kind words Rodney!

[@teddd2009]

Love it - fantastic job!

[@KeimpieceCarpentry]

Thanks for watching Ted, check out my recent video you'll probably like it

[@ophirvblog9924]

Wow!!! I'm amazed

[@KeimpieceCarpentry]

Thanks for watching

[@dickydoesaudio3466]

I wish I would have watched videos like this several years ago. I built a 12x12 building without any planning. It actually turned out great, except for the fact that I put it directly in contact with the ground and now 8-9 years later it's starting to rot at the bottom. Nice video and build.

[@KeimpieceCarpentry]

Thanks Dicky!

[@neoplasma1]

Jack it up and put something underneath then

[@KeimpieceCarpentry]

@@neoplasma1 great ideas neo plasma

[@bobbygetsbanned6049]

If you still have the problem you might look into Eurotec adjustable pedestals. I don't know if they are for actually lifting, but you could probably get them under the shed and get it off the ground with a little digging and some jacking.

[@TimSnively-ob6fb]

My

[@hotrodowner1965]

WOW. The thought of you pretty much doing alone is super impressive. You make it look easy. I'm having the exact size but a Malibu style built now by "pros" and mine doesn't look half this nice...great job! Thanks for taking the time to video to help people like me out.

[@KeimpieceCarpentry]

Yea doing it alone is definitely rough. Just trying to maneuver a full sheet of 3/4 plywood up a ladder onto a roof is a nightmare. Especially if it's windy out

[@cnw-jd9tt]

@@KeimpieceCarpentry I bet is there a way I can get rough measurements so o can build one similar?

[@KeimpieceCarpentry]

@@cnw-jd9tt Here are the build plans. keimpiece.com/collections/build-plans-digital-files/products/12x24-shed-build-plans

[@DarkangaelBrokenwing]

@@KeimpieceCarpentry Really appreciate that you are generous enough to share not only a complete build video but also the plans for your shed. Thank you sir.

[@KeimpieceCarpentry]

@@DarkangaelBrokenwing Thanks for the kind words. Filming projects is a pain but it's cool engaging with people and sharing experiences

[@ACHPKP]

Excellent! sure know what you're doing. Thanks.

[@KeimpieceCarpentry]

Thanks!

[@letsapochury8266]

Love the whole process

[@KeimpieceCarpentry]

Thanks for watching, go check out my other videos you'll probably like them

[@Army4Runner]

Fantastic! Definitely confidence inspiring. But it’s also evident you have some experience in construction. Even so, you certainly make it look easy. I’m debating tackling a job like this myself.

[@KeimpieceCarpentry]

go for it! While I certainly have experience building things out of wood, this is only the second shed I've built. Other than that, I don't have any other experience building houses or framing. Just watched some videos on youtube to learn. You can do it! buy the plans and watch the video and you'll be all set

[@Army4Runner]

@@KeimpieceCarpentry Thank you for the vote of confidence! I’m surprised this is only the second shed you’ve built. I would’ve guessed your full-time job was in construction. Did you have any issues preparing the ground where you built? My main problem will be ensuring a level surface. Thanks again.

[@KeimpieceCarpentry]

@@Army4Runner No, that gravel pad was there when I bought the house and as you can see I just laid some blocks down and ensured they were level with a laser. I def could have done a better foundation system, I just did the quick easy way. You can use a laser or a water level. If you watch my gazebo build video you'll see how the water level works.

[@Army4Runner]

@@KeimpieceCarpentry I’ll take a look at the gazebo video. 👍🏼 I definitely have a slope in our backyard I’ll have to figure out.

[@KeimpieceCarpentry]

@@Army4Runner You can do it!

[@redherring5532]

dudes got it all figured out, that wood ya had on the frame to kick prop it up; i would have not thought of that and insistently struggled with it. really awesom workflow, big help, thanks

[@KeimpieceCarpentry]

Thanks for the kind words John

[@charliesmith9528]

Great Job,,,I am 65 and older than you nw but saw the similarities in how you managed to get it done all by your self,,i seldom had help when i built sheds and garage,,took years to figure out how to do it,,now folks have you tube with great videos like your to get ideas on tps and tricks,,

[@KeimpieceCarpentry]

Yea there is no excuse not to go out and get things done nowadays with all the information sources right at your finder tips. There are so many little techniques and tricks you pick up along the way that make a huge difference especially when trying to accomplish a big project like this.

[@josephpuchel6497]

Hey excellent work. I built a smaller shed years ago but now want a larger one like yours.

[@KeimpieceCarpentry]

Go for it! I'm sure your second build will be much better. This was the second shed I built and it was way better than my first. You learn a lot of lessons doing big projects like this.

[@Reman1975]

Chocy Lab be like "What's daddy doing? Has he got something I can eat? No? Well, I'm off to see if there's any lost food around here......... Ooh, what's he doing now? Eating? No. More hunting for anything remotely edible" [Repeat ad infinitum]. :D

[@KeimpieceCarpentry]

Exactly lol

Such a great job. Really impressive.

[@KeimpieceCarpentry]

Thanks !

[@Ydnar6929]

Outstanding job.

[@KeimpieceCarpentry]

Thanks James!

[@joshuacacias6897]

Great job brotha! Probly one of the best build videos I’ve seen yet. You ought to think about going Solar in the shed. I’ve been looking at Solar option so when I start my shed build here shortly. I hope you get more views on this you done a hell of a job. God bless..

[@KeimpieceCarpentry]

Thanks Joshua! Solar would be sweet but I'll be running a cnc and laser inside with dust collection and fans. I think I would need a lot of solar to run that stuff. Video two will show how I run two circuits through an underground conduit to power everything in there.

[@timpalmer-logstolumber1999]

First I want to say the shed looks great but a couple things to think about. The window headers should be turned wide side up and down, they are stronger that way. Second, the drip edge should have went under the drip edge. Water will get under the shingles and then find its way under the drip edge causing the fascia to rot.

[@KeimpieceCarpentry]

Thanks for the tips

[@seekhimwithallyourheartand3358]

Repent to Jesus Christ “no weapon forged against you will prevail, and you will refute every tongue that accuses you. This is the heritage of the servants of the Lord, and this is their vindication from me,” declares the Lord.” ‭‭Isaiah‬ ‭54:17‬ ‭NIV‬‬ O

[@johng8049]

drip edge should have went under the drip edge??? do you mean it should have went under the paper ? I have asked many roofers about this and they all differ

[@timpalmer-logstolumber1999]

@@johng8049 yes, should have read better before sending. You should start at the bottom and overlap as you go up. Drip edge overlapped by tar paper, so water will run off smoothly.

[@abels.4791]

@@timpalmer-logstolumber1999 that's not always the case. Read your building code for the state you are in. Here in Florida it is approved both ways under and over. 99% of roofers in FL nail there eave metal after the underlayment is installed.

[@doublerainbow]

Looks great. Nice job!

[@KeimpieceCarpentry]

Thanks Scott!

[@cnw-jd9tt]

Just bought the plans I am super excited I loved following your project man!!!!

[@KeimpieceCarpentry]

Awesome! Thank you!

[@Codger2015]

Awesome build. You obviously know what you are doing. Good looking building. I don't understand why you did not stagger the flooring plywood joints and lay some kind of vapor barrier either on the ground under the shed or on top of the floor joists before the installation of the subflooring.

[@KeimpieceCarpentry]

because I was being a lazy idiot. I originally planed to do it but as I starting moving the sheets into place, trying to get the tongue and groves to fit together, working alone, was a huge pain. So I said F it and i'd worry about the onslaught of youtube comments later.

[@wongwang7666]

@@KeimpieceCarpentry 😂

[@mattstar1440]

Love the effort that went into filming! I am about to do the same thing but on a concrete pad. Only difference is I am a complete novice haha

[@KeimpieceCarpentry]

I'm sure you'll do fine Matt. No one is a novice with all the educational resources available on youtube. Plans are available on my site if you need them. Let me know if you have any questions and I'll provide what ever assistance I can. Wood prices will be your biggest problem now!

[@KeimpieceCarpentry]

@U Betcha Yea this foundation wasn't the most stable option. I was going for cheap and quick. I'm sure there will be some settling over the years. We will see how bad it is.

[@mendypimentel7459]

Amazing ❤

[@KeimpieceCarpentry]

thanks for watching, let me know what you think of my other videos

[@bryanbatts]

Spectacular build!!!!

[@KeimpieceCarpentry]

Thank you!

[@vince9486]

Great build. My only gripe is the tar paper goes over the drip edge, not under it. I, like you, do a lot by myself and was quite pleased to see a tad help when you put up the gable end overhang.

[@KeimpieceCarpentry]

Yea those gable ends were a pain. I'm sure there was an easier way to do them. First time

[@abels.4791]

Check your states building code as that's not always the case. Here in Florida it's approved both ways over and under. Most roofers install it over the underlayment here in FL. Because he have lots of rain and wind.

[@philmorgan7169]

You should have off set your floor sheeting so the butt joints don't line up. Start your 2nd course with a 4' piece and 3rd course with full sheet. This distributes the load more evenly on the joists.

[@KeimpieceCarpentry]

yea you're right. that's what i originally planned to do but it was such a pain in the ass moving those things around and getting the tongue and groove to line up i just said F it

[@amomentwithanimals7429]

Oh man I didn't even notice that when I first watched it. That's a big no no . You must stagger everything when you build,it makes it stronger and won't pop up at the seams. You have to do it in block,brick, plywood subfloor and sheathing, drywall, finish floor,roof , even the sod is staggered. You don't have to go 50% but you must stagger 33% min . If that had been in a house, the finish floor would be popping up , swelling, peaking etc.. Never build with 't' seams , always only 'T'

[@KeimpieceCarpentry]

@@amomentwithanimals7429 Yes you are yea you're right. that's what i originally planned to do but it was such a pain in the ass moving those things around and getting the tongue and groove to line up i just said F it

[@puppygadget3189]

Great job and video and loved seeing your beautiful puppies

[@KeimpieceCarpentry]

Thanks!

[@melonmelon3997]

Great video, brilliant job. Definitely you are the man. Respect!

[@KeimpieceCarpentry]

Thanks for watching and the kind words. Check out my other videos, I bet you'll like them!

[@colonelgilbert2475]

Another awesome video young man. I think the most impressive thing is you're a one man show. You should be proud that you built it completely by yourself. I would love to have a workshop just like that one. Great job.

[@KeimpieceCarpentry]

Thanks for watching and the kind words Colonel

[@Tr3zn3r]

For something this big that’s going to store a lot of stuff I would have done some larger concrete footers down past any frost line with sand and aggregate in the bottom. Then treated those with some foundation coatings as well as all the subfloor materials. Hate to see such a nice project shift a bunch down the road or get rot underneath

[@KeimpieceCarpentry]

yea if I was to do it again I would probably make a more robust foundation.

[@bigtroll8249]

Exactly what i was thinking about the footings

[@AngieVail]

Excellent work! 👏👏👏👏

[@KeimpieceCarpentry]

Thanks Angie!

[@casq882]

Simple awesome !!!

[@KeimpieceCarpentry]

Thanks for watching! Let me know what you think of my other videos!

[@thewrongperson4321]

Who else feels like this would be easy after watching this but knows your get halfway through and end up with unused wood in your backyard 😅

[@KeimpieceCarpentry]

thanks for watching. If you're worried about buying too much wood, I have plans available in the link in the description of the video and they include a list of materials

[@justinkeller4008]

Curious why you did the double bottom "plate"? Were those 8' sheets for the walls? Looks great!

[@KeimpieceCarpentry]

Hey Justin, the originally didn't plan to do double bottom plates but the inspector made me so it would be to code. Yes those were 8 foot sheets for the walls

[@bigtroll8249]

100% thats what i was thinking

[@bigtroll8249]

@@KeimpieceCarpentry hmm.. i doubt the code calls for dbl bottom plates. Typically an inspector will not call for unnecesary additonal support unless hes offering you a simpler fix to compensate for a weakness in an area that you already built out of code to save the builder time and/or $$

[@KeimpieceCarpentry]

@@bigtroll8249 well all I can tell you is I submitted the plans for approval, the inspector said I needed to add a double bottom plate, so I resubmitted the pans with double bottom plate, he approved it, and I built the shed, and the shed passed inspection.

[@bigtroll8249]

@@KeimpieceCarpentry ah, i see. Maybe he called for dbl bottom plate bc the perimeter is not supported by a continuous foundation. Two of those walls are supporting a roof w/o a foundation wall beneath

[@garylsimmons7255]

Great video... Perfectly done!

[@KeimpieceCarpentry]

Thanks for watching, check out my other videos and let me know what you think

[@rubenguillen9024]

What a good job putting this together

[@KeimpieceCarpentry]

Thanks Ruben, let me know what you think of my other videos

[@gihadmurad]

Hey, I'm considering something similar. Do you think 12x24 is large enough footprint for a wood working shop? Would it be limiting? I have a lot of space in my property, but I'm worried that building bigger than 12x24 on my own might be too big of a job.

[@KeimpieceCarpentry]

It all depends what type of projects you do. If its just for a hobby I think 12x24 if fine, it's similar to a 1 car garage. If you intend to make money wood working then you'll def want to go bigger. 2/3 of my shed is for my cnc, laser, and wood storage. The back 1/3 is a gym. I have my 2 car garage as my primary wood shop. There are some creative things you can do though if you decided to do it yourself and stick with a 12x24. For example, you could build a big hard cover overhang on one side that you use for wood storage so it's not taking up floor space inside. Not sure what your climate is like. You could also have a large concrete pad built so as you use your tools you just roll them out from inside the shed to the concrete pad to use them like your table saw, planer, jointer, bandsaw etc.

[@travisandtracyjacobs6198]

Awesome work. My only complaint: Would you please take the time to play with your dog next time. 😆 He was killing me. My dogs distract me all the time.

[@KeimpieceCarpentry]

Oh don't you worry, she got plenty of play time in between film shots. Every scrap piece of wood got thrown across the yard for her to turn to mulch.

[@VidyaSimran]

So peaceful to watch. Dog was very hardworking ❤

[@KeimpieceCarpentry]

She was working overtime that's for sure

[@VidyaSimran]

@@KeimpieceCarpentry LOL 😆 😂 🤣

[@cowboygeologist7772]

Cool. Thanks for posting.

[@KeimpieceCarpentry]

Thanks for watching Cowboy

[@annettesurfer]

From the cheap seats: the floor panels should’ve been staggered so not to land on the same floor joist and a longer level would’ve been more accurate than a torpedo on those wall studs. The sheathing looks like LP Smartside panel siding which requires a house wrap behind plus 6” ground clearance and the bottom edge must be painted, according to their instructions. Ridge venting alongside a gable vent...you may want to Google to see the problem with that. Most residential sheds greater than 200 square feet require a building permit, which isn’t to say a permit isn’t required for sheds under 200 Sq Ft since then a zoning permit is required to verify setback compliance. The difference is in the foundation requirements, which in my area is a 42 inch footing for sheds like yours. Another consideration often overlooked is RADON, which even I disregarded until I discovered that it indeed does cause cancer. With your structure so low to the ground, it may not have a natural way to vent out and may find a way to accumulate inside the shed, plus rising ground moisture has to vent as well. I hope you’re considering screening the perimeter to keep the rodents out.

[@KeimpieceCarpentry]

Hey Steve great comments. I'll try to address each. 1. Staggering floor panels .... yes you're 100% right, that was my original plan but ass I was hauling those 3/4 sheets I said F it and just threw them down. 2. Longer level = more accurate . . . yes you're 100% right. I just didn't care enough to spend the money on a larger level. 3. Panels requiring house wrap and ground clearance . . . you're likely correct, but it's a shed and those things don't matter to me. 4. Ridge vent and gable vent . . . I have done the research, there is not issue with my specific use case. I have a cnc and laser running inside that half, so I have an exhaust fan hooked up on the back side of the gable vent to assist in pulling out dust and smoke from the cnc and laser. I do not have a gable vent on the back side which is a gym. The soffits will be vented providing circulation up through the ridge vent. Plus it's not like it's an attic in a house, it's a shed, it's all open so I wasn't too worried, I just want to keep the humidity as low as I can but NC summers will probably make my effort futile. 5. Permits. . . my county required a permit for sheds over 12 ft. I did go through the proper permit process for this build and everything was approved. They made me do a double bottom plate, I originally didn't plan on that. 6. RADON . . . . you're prob right, but it's a shed and I don't care. 7. Rodent screen . . . . yes you're right, I should get around to that but my back yard is fenced in and I'm sure you noticed my Chesapeake Bay Retriever that didn't leave my side during the build, I'm sure she would love if a rodent tried to make a home under the shed. All great points that people should think about if they're building a large shed like this. Thanks for taking the time to lay everything out, hopefully some people read it and utilize your recommendations.

[@aerialrescuesolutions3277]

@@KeimpieceCarpentry Well said, and very well handled.

[@luxurycarkey7207]

Great job...your work is amazing

[@KeimpieceCarpentry]

Thanks man!

[@vasanserca901]

Beautiful build !!!

[@KeimpieceCarpentry]

Thanks for watching, don't forget to watch part two and let me know what you think of my other videos

[@jaimemerino8176]

Oh My Goodness! Dude You are awesome!

[@KeimpieceCarpentry]

Thanks for watching. Don't forget to watch part two of the shed build, check out my other videos, you'll probably like them

[@terrywarner1390]

Looking great, good job

[@KeimpieceCarpentry]

Thanks Terry!

[@Liam-xd1hw]

You Sir,are a man,and an inspiration.

[@KeimpieceCarpentry]

Thanks!!!! My wife isn't ever impressed :(. Let me know what you think of my other videos, you'll probably like my gazebo and tree house build video

[@Liam-xd1hw]

Thanks for the reply 👍 thinking of doing a project for my house, Greetings from Ireland 🇮🇪.

[@KeimpieceCarpentry]

@@Liam-xd1hw Good luck on the build, let me know if you have any questions! Plans are available if you need them.

[@user-iw6ry5sp9k]

Love that

[@KeimpieceCarpentry]

Check out my other videos and let me know what you think

[@pepsi4menu]

Awesome video. Look forward to more! 🇦🇺

[@KeimpieceCarpentry]

Working on it lol

[@facts9051]

Wow very incredible work!! 👏

[@KeimpieceCarpentry]

Thanks for watching!

[@jasonkeith674]

Thanks for showing me how lazy I’ve been lately 👍. Awesome work man. Thank you for sharing 🙏

[@KeimpieceCarpentry]

Thanks for watching Jason, you should see what I'm working on now. Huge gazebo and pergola all from custom milled local lumber, timber framed. It'll be the next video. If you haven't make sure you subscribe and turn notifications on so when I get the video edited and posted you'll get notified.

[@Tundralife]

Amazing

[@KeimpieceCarpentry]

Thanks for watching, let me know what you think of my other videos, I bet you'll like the gazebo and treehouse build

[@JagsirSingh.90617]

Good work 👍

[@KeimpieceCarpentry]

thanks let me know what you think of my other videos