1448 Weldbilt Full Build! pt 1

Welp I hope you are ready to follow me back down the rabbit hole! We're going to do this all over again! I have been waiting a while to start on this build. This video is long and has a lot of information. I shared a lot more than I normally would about the build in this 1st episode. It is really nice to start with a brand new blank canvas. I hope you guys enjoy this build. it's going to be one of my best! Thanks for watching and please subscribe.
Follow Tricked Tins on my other social media accounts for giveaways and special offers👇
bit.ly/TRICKEDTINSFACEBOOK
bit.ly/TrickedTinsJonboats
www.TrickedTinsJonboats.com
Follow my Videographer👇
/ ricomarcelophotography
/ ricomarcelophotography
/ _rico_marcelo
Follow SBFISHINGTV👇
bit.ly/sbfishingtv
My brothers company check him out👇
bremmystrong?ig...
bremmyproducts.com/2Y=
bremmyproducts.com/

[@KWMachemer]

I’m pumped for this build, can’t wait to see how it turns out! Keep up the awesome content brother! 🔥🔥🔥

[@brandoncrowe1223]

I'm looking forward to this build!

[@TRICKEDTINS]

Thanks brotha! Episode 2 is almost done. Should be dropping this week.

[@TKOSNGR]

When I redid my jon boat mod this year having a lockable rod locker was my main priority. It's the reason I cut my middle bench out. It has saved me so much time in the parking lot. I used to have to load and unload my rods at the ramp and that little bit of time makes a difference. Not to mention I don't worry about my rods if I'm dropping a deuce before hitting the road when I fish alone 😁

[@TRICKEDTINS]

Might do the locker. Seems like it's what the people want.

[@TKOSNGR]

@@TRICKEDTINS I'm sure your customer will appreciate it. When not holding rods it just becomes a large stow. I use my port side rod locker for a paddle, life vests and tackle. Can't go wrong.

[@rodconner9079]

Gonna be fun and interesting! The "talk", well -- it's intent covering the "ins and outs" ... AND the reasons WHY!!! So that narrative is needed -- not for all but so so many!!! You do your vids - YOUR WAY. : O Now, GET BACK TO WORK!!!! Be Safe ... that is a nice replacement machine (Miller) ya got there, for sure!!!

[@TRICKEDTINS]

Thanks that welder is super nice!

[@randystevenson1264]

Great video keep them comeing

[@leeperkins2956]

Lookinf forward to watching this and getting ideas. Get Back to Work..

[@brandywineangler6748]

Blank canvas: show your stuff!

[@TinyBoat]

This type of "making of a jon boat to bass boat conversion" is exactly, what i want to see! Your hands are magic your builds are masterpieces. And yes, i think too that a welded an thickr hull jon boat base from weldbilt or express is the right choice for customizing and put in thousends of dollars in fishing gear. I would never do it with a rivited or/and thin hull. Nice to hear that from you. Rock n roll dude. Make us happy. Great content!

[@TRICKEDTINS]

Thanks brotha! I think you'll like part 2! Probably dropping on Wednesday

[@TinyBoat]

@@TRICKEDTINS I'm watching your Videos since your third or second upload. I think this series is, what many peoples are looking for. Regard from Germany

[@maddgoatee9708]

Great start. New or old, so you want a custom build. Stuff gotta be moved, cut and welded. Not for the weak hearted. I'm a fan of the rod locker because I mostly fish alone. If I had to leave my boat for a minute it wouldn't be an option around here. Loving the plan and build so far.

[@TRICKEDTINS]

Thanks brotha! That rod locker is still up for debate...

[@steadykastyn2073]

Dude you're a sick fabricator.. the jet boat you did is awesome

[@TRICKEDTINS]

Thanks brotha!

[@catchingmoefish]

Sick I’ll be watching

[@MichaelCraig-bi3wj]

Intense, I can see you are concerned about this one. We know you will pull it off like a champ like always. I watch a couple of other boat builders and they are good but not as good as you, keep up the good work!

[@TRICKEDTINS]

Thanks brotha!

[@Fishingforbasstv]

good luck on the build boss

[@briangullickson9013]

Let’s see how this plays out… 🎉

[@TRICKEDTINS]

It's looking good already!

[@jonboy_tv4927]

Almost 7k subscribers. Keep up the good work bubba.

[@TRICKEDTINS]

I need to colab with some other Googan members to get the numbers rolling!

[@jonboy_tv4927]

@@TRICKEDTINS yeah man. It will come. Seeing some of the work you’ve done especially when you link up with other content creators it will take off one day and b4 you know it you’ll be at 100k

[@chrisroberts3963]

Purple camo and a bright green tray, what could go wrong 🤷‍♂️ Maybe it will be better than the Rasta build

[@TRICKEDTINS]

Hahaha! I like those builds. They are flashy, and Rememberable. That was a crazy linup I hit with NEPTUNE, MARYJANE, PUNISHER! I think this one will be right up there with them.

[@mattaneshansley5349]

If you're on the fish you just need a couple rods out, everything else is in the rod locker. If you need a bunch of rods out, you throw your bags, jackets, and trash into the locker because it's a huge compartment. If you're traveling a lockable rod locker is critical. Same thing with the live well. If you're keeping fish you need a big live well. If you're not keeping fish you use your live well as a cooler / storage. If you're fishing tournaments a big live well is critical.

[@TRICKEDTINS]

Makes sense. Im seriously considering the locker...

[@charlespoling3331]

The rod locker is important because you don't want dust getting in the reels when traveling. Plus most bass guys bring extra rods that won't always be used but need to be stored on the boat.

[@TRICKEDTINS]

I hear ya. Its only a 14ft boat tho. Im still on the fence about the rod locker

[@kaseykingery6217]

Lol rod locker? What’s wrong with the floor of the boat?

[@TRICKEDTINS]

Watch the final real

[@infodreams2realityvacation233]

Thinking about getting a Weldbilt.Dont really care about the compartments just want the hull to be strong and not have a bunch of rivets. I was checking out some of your builds. You are a F_ _king artist. Keep up the good work.

[@TRICKEDTINS]

Thanks brotha! Its a passion. Each one is unique, and custom. Im always trying to 1 up myself.

[@jasonkimbrel37]

Hey man, I’m local to the area. Would love to help out with some of these builds one day. Free labor, just enjoy what you are doing and working on boats and with my hands. Hit me up!

[@TRICKEDTINS]

Cool man thanks for offering. Hmu on IG or FB messenger

[@rafeone9808]

Did you know there are boats out there you can buy already set up for bass fishing.

[@TRICKEDTINS]

Hahaha, not like this! These are one of a kind.

[@mkodom88]

Would you recommend a TIG welder over a MIG welder for these applications?

[@TRICKEDTINS]

For sure. Tig is way cleaner, and you have so much more control. Anybody can squeeze the trigger on a mig gun.

[@mikemadethemfly7662]

Where in VA are you homie?

[@TRICKEDTINS]

Virginia Beach

[@briangullickson9013]

The gloves are off!!!

[@seanglasgow9611]

No way a 9.9 can make you go 22-26 mph

[@TRICKEDTINS]

The 1448 tracker grizzly I just built hit 26 mph with the same exact motor. Its a 9.9 with 15hp reeds.

[@seanglasgow9611]

@@TRICKEDTINS good to know my 15.5 sea nymph has a 30 hp 1986 evinrude and does about 20-24 with two people and tackle.

[@TRICKEDTINS]

It's probably full of heavy waterlogged foam. It has a lot to do with weight distribution, RPMs, prop, and jack plate.

[@BAWhite-rf2bs]

too much talk!!! Get a thesaurus and learn some new words...

[@TRICKEDTINS]

Sorry man. Episode 2 will be different.

[@TRICKEDTINS]

I did not realize how much I cuss until I started making videos lol. I'm trying to replace those words. If i say its "sick" I really mean "this mf'er is bad af" I'll try harder!

[@tintdr]

I just picked up a Grumman 1988 17ft 75 inch wide 21 inch sides, 20 inch transom tin boat that resembles the lowe 1648 aura. I'm in Florida and I'd like to drop the boat off to you and get some things done before I paid t it. Do you have an email address or phone number?

[@TRICKEDTINS]

Never heard of a 75" wide? Width is measured at the floor of the boat. No offense, but Im really not interested in working on an old rivited hull. You can reach me at TrickedTinsJonboats.com

[@tintdr]

@@TRICKEDTINS 50 at the water line 75 top side, and its all welded 680 pounds modified V

[@tintdr]

@@TRICKEDTINS allot of your flowers I'm sure have old riveted tins. Thinking your to good to work on someones older riveted tins is not a good look at all. Most people who own these boats aren't wealthy. There cheap boats so the average working man they can afford them if not new the older RIVETED tins for sure. And allot of people love the older boats. Sure its great to work on only new boats, there clean, built better etc. But not a good business model. And honestly with that attitude and way of thinking I bet your turning away allot of money that could be had, and turning off allot of subscribers like me. Take me for example, I have some money. I have several boats in Florida and N.Y. But I have this one tin boat i liked and purchased used here is fl. I own 4 tins all together and several various offshore boats. So a subscriber or customer might just want a floor or a trolling motor mount etc. Quick easy money. They follow you and most likely dream of one day wanting some work done from you as i did.. I sent you a couple photos and texts. Not one reply. So your certainly not a business man in the tin boat business or here to make money off the actual boats, your all for show on here! And with that you lost a subscriber and a potential customer who would have spent thousands over the years of i liked your work. But nope.. you judge a book by its cover! Piece ✌