Major Modifications, "tiny" Boat!

What an episode! That back bench has been bothering me since the first time I saw it.
I'm glad it's fixed now. It set me back a little, but we're still on schedule to wrap this project up right around the 1st of the year. Happy Thanksgiving! I'm headed to the Lake!!!
3" x 1" x 1/16" tube 7' @$3.00 =$21.00
2" x 1" x 1/16" tube 6' @$2.50 =$17.50
1.5 "x1.5"x1/8"angle 10'@$3.50=$35.00
That's a total of $73.50 for the front deck framing. This frame is super lightweight coming in at only 6.5 pounds!
.040 rod locker sleeve $20
Custom .125'' Side angles $60
1.5"x1.5"x1/8"angle 12'@$3.50=$42
20-gallon Livewell $200
I appreciate everyone watching and please subscribe!
If you need anything you can reach me on the links below! "I gotta get back to work!"
Follow Tricked Tins on my other social media accounts for giveaways and special offers👇
bit.ly/TRICKEDTINSFACEBOOK
bit.ly/TrickedTinsJonboats
www.TrickedTinsJonboats.com
Follow my Videographer👇
/ ricomarcelophotography
/ ricomarcelophotography
/ _rico_marcelo
Follow SBFISHINGTV👇
bit.ly/sbfishingtv
My brother's company check him out👇
bremmystrong?ig...
bremmyproducts.com/2Y=
bremmyproducts.com/

[@marklaramie7393]

Just crazy man, no rest for the wicked, the work you turn out is above the rest I've ever seen 👍

[@TRICKEDTINS]

Thanks brotha! Im on a mission!

[@b4billions_]

sick 🔥

[@FranksDIY]

Just like life speed bumps all the way lol. It's the ability to overcome them that makes it or breaks it and I know you'll overcome it

[@TRICKEDTINS]

Yessir

[@davidwilson7430]

I enjoy the content keep up the good job.

[@TRICKEDTINS]

Thx brotha! I'm filming the Stratos reveal tomorrow! I'm excited! The wrap is sick!

[@stevegriffin174]

You do awesome work. Im very impressed. Today is first time I've ever seeing one of your video's and don't know where you live . Wish you were somewhere in Georgia, I would let you build my boat .

[@TRICKEDTINS]

Thanks brotha. Virginia Beach

[@southernrat9639]

It’s going to be a nice boat!

[@TRICKEDTINS]

Thanks brotha! One of a kind

[@ZachNMcCall]

"Why" was my cut back in the day. Sounds like a solid playlist.

[@TRICKEDTINS]

I like all genres of music, but sometimes I need some Gangster Rap to get me going lol.

[@gatorbytefreedom9993]

Need to see boat and trailer build from scratch.

[@TRICKEDTINS]

One day...

[@mattaneshansley5349]

Looks great. You obviously have an eye for this. Most guys just run the hatch along the side of the boat.

[@TRICKEDTINS]

Gotta keep those lines straight!

[@brandywineangler6748]

Also-really psyched to see the Stratos

[@TRICKEDTINS]

It looks so good.

[@RA-zl6iw]

She’s coming along nicely. Gonna be a very cool boat. There’s no one on KZbin doing the level of craftsmanship that you are putting out. Thanks for the inspiration. Happy Thanksgiving.

[@TRICKEDTINS]

Appreciate that. Happy Thanksgiving

[@christinerogers5331]

It's coming together and it's going to be awesome!!! I really like the correction mod you did on the rear bench, that made all the difference in the flow of the deck front to back, PERFECT! WOW got a glimpse of the Stratos, and it's looking fabulous, can't wait to see the revealing!! Matt, I'd like to wish you and your family a very HAPPY THANKSGIVING!!!

[@TRICKEDTINS]

Thank you. I really appreciate that. I wish you and yours a happy Thanksgiving also! The Stratos looks amazing! I'll share the video as soon as possible! Thanks again!

[@ntj030885]

I need that boat

[@BrokeBackBob4559]

Excellent work. And great video. Nice to see someone who cares about what they are putting out to their customers

[@brandywineangler6748]

Amazing work. Keep the super videos coming!

[@matthewwhalen6427]

Break Out Another Thousand…… BOAT

[@TimHaunFishing]

As a fellow craftsman. I was impressed with the homemade jig, a lot of people wouldn't of even thought to buy one, let alone build one.

[@TRICKEDTINS]

Thanks brotha! My pops always says "Necessity is the mother of invention "

[@jameskinniry8931]

Keep the great content coming! Get back to work!

[@TRICKEDTINS]

Thanks brotha

[@dickie7311]

Awesome job Matt !!, I'm not sure if you finished the back deck yet, but, i sure would likw to see how you fabbed it up, I'm getting pretty close to that point on my boat, Thanks from Texas !!

[@TRICKEDTINS]

This is an entire series this boat was built last spring. There's videos that will take you all the way to the reveal and water trial. Thanks for watching

[@AlexOnTheWater]

Masterful work and a great eye for detail on these boats. Happy Thanksgiving to you and your family.

[@TRICKEDTINS]

Thanks brotha! Happy Thanksgiving

[@maddgoatee9708]

Bench looks great now. Makes perfect sense why you did the extra work. Your logo and brand will be on the boat forever. Happy Thanksgiving Matt & family.

[@TRICKEDTINS]

Thanks brotha. Happy Thanksgiving

[@texasplumr]

This is badass! Fabrication at this level is expensive but well worth every penny. Enjoy Thanksgiving! You deserve a break.

[@TRICKEDTINS]

Thanks brotha

[@michaelcox609]

I love the way the boots coming together. Get back to work.

[@saleen12]

I'd like a quote on building out a 1648 Grizzly please. I don't want a live well, I just want storage/rod locker and decks. Similar to your personal building minus the live well.

[@TRICKEDTINS]

Email [e-mail]

[@rodconner9079]

Coming right along --- and a lot of time involved!!! But damn, it's gonna look hella good!!! Itchin' to see the Stratos after that teaser, NGL!!!! : ) Be Safe Oh --- Wishing you and fam a very Happy Thanksgiving!!!

[@TRICKEDTINS]

Thanks brotha happy Thanksgiving!

[@randystevenson1264]

Comeing along great got ? How u u been Tig welding what torch and cup size u using

[@TRICKEDTINS]

Been welding 21 yrs. We have over 50 welders all set up with different torches for any application

[@johnsain3117]

5 grand what are you smokin

[@TRICKEDTINS]

Lol. You pay for what you get.

[@TRICKEDTINS]

I build lifetime boats brotha. Most of my builds have over $10k just in electronics. Check this one out! Almost 40k in it! kzbin.info/www/bejne/h6C6koVrotSqjKM

[@TheCrash1987]

By the way, what tool is that you are using at 12:46?

[@TRICKEDTINS]

It's an aluminum deburring tool. I use it to enlarge holes, and remove sharp edges. AFA Tooling Deburring Tool Kit with 11 High Speed Steel BS1010 Blades | Precision Edge Burr Removal on Copper, Iron, Brass, and PVC Plumbing Pipes, 3D Printing Plastics, Resin Art, and Metal Work a.co/d/3XwuDKN