14L Series 60 EGR replacement

Fault code EGR Valve Incorrect Position

[@garybennett7851]

really appreciate your videos, you really explain things well

[@jason22landry]

What code was it showing?

[@rigobertohernandez7333]

It says incorrect ???so wasn't installed right even with the arrow pointing ???

[@CarlosDieselElectric]

Rigoberto Hernandez the arrow should always point towards the intake side of the engine. I’m pretty sure it can be installed wrong but arrow always goes in the direction of the flow from the EGR cooler to the intake manifold. Not sure where you saw the arrow pointing. Let me know, because if I made a mistake I will correct it.

[@mexi9787]

Good evening sir ! I just got a 2009 Century 120 14L dpf deleted but still has the egr can I delete it when it starts to give me problems? For now my mechanic says it works good at 659k miles would it be good to delete the moment she starts having problems? I live in Houston Tx ! Thank you sir !

[@CarlosDieselElectric]

The good thing about that EGR setup is it inexpensive to replace the part. They are pretty reliable and only cost around $300 to replace when you need to. I would say leave it.

[@mexi9787]

@@CarlosDieselElectric thank you sir !! Also thank you for getting back to me this is my first truck so I’ll take all the knowledge I can acquire 💯🙏🏽

[@deeb1504]

Great video!👍 What is the cost of parts and labor for this type of repair?

[@CarlosDieselElectric]

EGR Valve runs about $350-$450, and does need new seals. Labor is about 1-2 hours, that should be start to finish.

[@CarlosDieselElectric]

Thank you

[@brokesttruckeronyoutube3256]

Thanks! I'll purchase the part today just incase it breaks

[@danielnunez4423]

@@CarlosDieselElectric where did you get egr valve for that amount? Freight liner has it for 1300

[@CarlosDieselElectric]

@@danielnunez4423 there are two types of EGR valves. The first style EGR valve is for the first type of 14L that came out around 2004-2007 and that EGR valve is located on the passenger side around the turbo which is very expensive. Then when EPA07 (clean air emissions) came out which was late 2007-2009, it was still 14L but the EGR valve is on the driver side near the Intake Throttle Valve That EGR valve is much cheaper.

[@pashadozic3716]

Do you know what could be 128 S248 14, Loss of power and RPM needle goes up and down a bit while driving... Tnnx for helpful videos!

[@CarlosDieselElectric]

What year is your truck? Also, which engine do you have? The Series 60 or the DD15? is the a check engine light on when it does this?

[@pashadozic3716]

Carlos Diesel Electric Detroit 60, Century 2008, chk engine light is sometimes on sometimes off, but loss of power is all the time plus I can feel engine shaking when i reach 9th..10th gear... While idling...everything looks ok whit rpm needle and runs ok I would say... Filters are clean and air intake hoses are new...but that code SID248 FMI 14 is area to look at...

[@CarlosDieselElectric]

Paša Dozic have you had someone check the Intake Throttle Valve? If the valve is closing instead of opening it can cause a loss of power. Have someone connect their Diagnostic Link and see how it responds.

[@pashadozic3716]

Carlos Diesel Electric It was injector #1. Broken rocker arm...

[@CarlosDieselElectric]

Paša Dozic I have seen that a few times. Didn’t the engine sound like it was missing? Or misfire?

[@Nick4b11]

Whats the code it throws when it’s the EGR valve, couldn’t see them on your laptop

[@rigogallegos3477]

Pdi 146 i believe

[@alejointruso6566]

Hola buenas una consulta tengo código SID 147 en un columbia con detroit 14 litros me podrías ayudar ?

[@CarlosDieselElectric]

Que año es el camión? Ay dos estilos de 14L , dependiendo del año.

[@alejointruso6566]

Es año 2013 es el mismo motor que tienes en el vídeo Muchas gracias por responder ganaste un nuevo seguidor desde chile.. 👍👍

[@lobbyrobby]

Does a 2005 12.7 60 series have egr?

[@CarlosDieselElectric]

No, EGR cooler was installed in the 14L

[@lobbyrobby]

@@CarlosDieselElectric thanks

[@waelalmaj1939]

Great vid. Do You know where I can get a Manifold block plate for The egr? 06 12.7

[@CarlosDieselElectric]

I don’t believe the 12.7 has an EGR valve. The EGR valve started on the 14L engines. But for the 2006 I don’t believe or have heard of a block plate. I know that is t much help. But thanks for the compliment.

[@victorvazquez8513]

Im going to replace EGR , do i just replace it or do i have to program the truck to the computer

[@CarlosDieselElectric]

The EGR valve is self calibrated when you cycle the ignition on.

[@victorvazquez8513]

@@CarlosDieselElectric OK so do i just take the puede and replace ut then do i Connect and the i just trun the truck on and thats it

[@victorvazquez8513]

@@CarlosDieselElectric my problem is that the truck Is a frylinwr colombian 2009 and the problom is that the the check ur engin turno on they scaned it and it said EGR and teb truck docente turn off i dont kown if u can help me or i dont kown what to do

[@victorvazquez8513]

@@CarlosDieselElectric if discconect the EGR can i still work with the truck will it lose strengh

[@victorvazquez8513]

@@CarlosDieselElectric thank u if u can help me thank u from coloradp

[@martchelomantchev7534]

This is not 14L its 12,7

[@Loconoloquisimo]

👋 i have a 2008 cascadia with a 14.0 L I bought it with the egr deleted and with a 12.7 turbo that is giving me problems, what do you think is happening and where you are locate?

[@CarlosDieselElectric]

Oscar Luis Cruz Diaz could be the delete. I am not too familiar with EGR deletes. Could be programming. What is it doing?

[@Loconoloquisimo]

Carlos Diesel Electric a mechanic around my area did the programming and after that i feel that lost power and he said that he did everything good, i feel he was mad because he did not do the job, do you thing if a look for a good programmer it will get fix.

[@CarlosDieselElectric]

Oscar Luis Cruz Diaz hard to say, could be a smaller turbo, but it could be because you went from a turbo assembly that was controlled by the ECM is now working like the old style turbo. The old style turbo will have some lagging, I am assuming you are talking about boost.

[@carmello000jp]

@@CarlosDieselElectric I had my egr all removed from my 05 14l. My tuner and mechanic did the 12.7 swap new gen garret turbo and my God this truck rapes apes. He did a valve adjustment to his specs an a n3 injector hack that some don’t know about. My truck was overhauled 78k ago and my turbo was original in the truck. I haul 84 of frack sand daily.. and it never had balls up hills in this 515hp 60 series.. now… the truck not even in the same league

[@carpinales4697]

Que fallas presenta el EGR?

[@CarlosDieselElectric]

Pierde fuerza, la luz de check engine light se enciende, no puede ser la regeneración. Que código tienes?

[@carpinales4697]

@@CarlosDieselElectric el poblema que tengo es que se acelera y se desacelera pero no prende ninguna luz ni check engine

[@CarlosDieselElectric]

@@carpinales4697 la falla que tienes es cuando estas estacionado con el motor aprendido (idle)? Para estar seguro, es Series 60 14L

[@carpinales4697]

@@CarlosDieselElectric si, se acelera y desacelera cuando esta parado lo raro que no lo hace todo el tiempo es el serie 60

[@thiaresilva7774]

Hola pudiste solucionar ese problema tengo el mismo y Nose que puede ser

[@willphipps4820]

The egr valve just needed cleaning

[@CarlosDieselElectric]

That is always an option, I usually just go with replacement depending on the age, fault code and the fault count.

[@hereigo4616]

I have liquid present

[@CarlosDieselElectric]

Could be the cooler, check your EGR cooler

[@user-xc2bu7wl3f]

Delete!

[@CarlosDieselElectric]

I wish we could. But California is really starting to enforce clean air by requiring smog twice per year.