#15 Harbor Freight Quick Hitch with the Kubota B2601 Compact Tractor. 3 point hitch demo and review

New! Check out the store at www.shopmcg.com!
Here are my first impressions using the Harbor Freight Quick Hitch. I paid just $88 for it. Is it worth it? I'm using it with my Kubota B2601 compact tractor and land pride implements. I also attach the Woodland Mills WC68 woodchipper using this quick hitch. Enjoy this harbor freight quick hitch review. #MCGtv #kubotab2601 #homesteading @harborfreight
For entertainment purposes only.
Other products:
PTO extension from Amazon
www.amazon.com/gp/product/B08...
Category 1 bushings from Amazon:
amzn.to/31grlof
Here are some other product suggestions that I use. These are Amazon Affiliate links, so purchasing will help this channel by providing a small commission while not costing you any more. Thank you for your support!
Lumax Heavy Duty Grease Gun:
amzn.to/3mFK1pA
LockNLube Grease Gun Coupler:
amzn.to/3kPcvwu
Recommended Grease:
Valvoline Moly Fortified
amzn.to/3jNM1Kv
Nitrile Gloves:
amzn.to/34Kg8OG
Deerskin Gloves:
amzn.to/2I17NNy
My Video Gear:
Rode Wireless Go II microphone:
amzn.to/3eiJatG
Canon M50 Camera (now Mark II):
amzn.to/3vHW9uD
Battery adapter for M50:
amzn.to/2RshsBE
Sigma 16mm prime lens:
amzn.to/3vJDRcx
Sigma 30mm prime lens:
amzn.to/3epFneh
Variable ND filters:
amzn.to/3tmoHIs
Short Guitar Clip by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Artist: audionautix.com/

[@MyClutteredGarage]

Here are some other product suggestions that I use. These are Amazon Affiliate links, so purchasing will help this channel by providing a small commission while not costing you any more. Thank you for your support! Lumax Heavy Duty Grease Gun: amzn.to/3mFK1pA LockNLube Grease Gun Coupler: amzn.to/3kPcvwu Recommended Grease: Valvoline Moly Fortified amzn.to/3jNM1Kv Nitrile Gloves: amzn.to/34Kg8OG Deerskin Gloves: amzn.to/2I17NNy My Video Gear: Rode Wireless Go II microphone: amzn.to/3eiJatG Canon M50 Camera (now Mark II): amzn.to/3vHW9uD Battery adapter for M50: amzn.to/2RshsBE Sigma 16mm prime lens: amzn.to/3vJDRcx Sigma 30mm prime lens: amzn.to/3epFneh Variable ND filters: amzn.to/3tmoHIs

[@wouterkoolhaas]

As a rookie tractor owner, new at every single bit - I highly appreciate listening to your experience. Love the calm and polite approach in your instructions and explanations. Looking forward to many more video's :)

[@MyClutteredGarage]

Thanks for following along!

[@larsrodbok1285]

You have a great “dad” vibe, very easy to watch and listen. Never mind you are younger that I am. :)

[@MyClutteredGarage]

Haha. Well I’m still a dad. Much appreciated 🤣

[@ajsnowskis]

Best quick hitch video I have watched. Thanks for taking the time. Your audio is excellent too!

[@MyClutteredGarage]

Thank you!

[@fredsites5723]

stayed for the video but subscribed for the band tip. love it, thanks

[@MyClutteredGarage]

Thanks Fred!

[@bradleyebling1464]

Don’t know if It’s been mentioned or not but land pride makes two top link plates that form a floating top link.

[@Bobbywilliamson-sh2em]

Been shopping harbor freight for years. Great prices and good merchandise. ❤

[@RandyBeretta-db5bg]

Taking your time is Great.! Everything seems to fall in place when you do and your less likely to get hurt or damage something.! 🤔

[@t26803]

quick hitch is the BOOM as the kids say !

[@t26803]

I forgot to mention I have the Harbor freight QH and have used the heck out of it with no issues. Even with the pounding of rocks on the tiller and I have Rocks! Big Rocks and lots of them and this thing has held up well. So why spend the money on the so called name brand when I could get 4 of the harbor freight ones for less than one name brand? I just don't HATE my money that much.

[@119topdawg]

Great video, thanks for sharing. Good to know that putting a box blade on a cat 1 3 pt is a significant life event for others as well…😂

[@MyClutteredGarage]

🤣🤣🤣

[@edwcory]

I just bought a LandPride RTR 40” tiller and the included driveshaft was 3” too long to fit on my Kubota BX2380’s category 1 hitch. I watched your video right before heading to Harbor Freight to buy their quick attach and I do believe they revised the top hook to give it more clearance/distance. Working like a charm now! Thanks for your video, very helpful for me!

[@MyClutteredGarage]

Awesome to hear, Ed. Thank you for sharing! Enjoy the tiller!

[@fadofox11]

Looks like you need the Cat.1 to Cat. 2 or 3 bushings for you implements. they will make the implements fit more snug into the QH.

[@keithzoeteman4864]

nice to see Hotch give the tail wag of approval. I’m going to get one. Glad to hear you can use the 20% coupon.

[@jeffsaunders4785]

I learn something every time I watch your videos. Keep em coming !

[@MyClutteredGarage]

Thanks so much!

[@dalestevens4683]

When you are using your finish mower move the hook on your quick hitch up to the top holes and it will work....I know it's kinda a pain to move back and forth...but it's easier than hooking to the tractor I know it will work because I have one.

[@MyClutteredGarage]

Thanks very much!

[@TomBTerrific]

I tried moving the hook to the top bolt holes but it didn’t help. I have a Bush Hog RDTH 60 finish mower.

[@johnzvara4389]

Versatile top link attachment helps greatly for implements that are not Q.H . Ready. I bought mine on Amazon $27.99.

[@hectortn4]

I would like to thank you for your videos their very helpful and informative. It prompted me to choose the best B2601 I had b7500 for over 24 years. Love my new B2601. I've had it since May 2022. Thank you for your great videos.

[@MyClutteredGarage]

Thank you, Hector. Congrats and good luck! -Ed

[@spolz2231]

Well done. Thanks for sharing.

[@MyClutteredGarage]

Thank you!

[@royhoco5748]

tip - I keep a 5' pry bar or piece of pipe with my attachments for making minor adjustments if the attachment does not line up just right or the lift arms do not want to come off the pins easily, especially useful if not using a quick hitch. the bar provides leverage to lift something up a little or move it side to side a inch or two.

[@MyClutteredGarage]

roy hoco - very good idea! Thanks for watching.

[@jrhawk574]

I just picked mine up at HF in Plano, TX. Heading g down to my "Back Acres" outside Corsicana. Glad I found your site here. At almost 80, I need all the help I can get. Tired of using "Pry Bars, blood & sweat trying to hookup my stuff.

[@MyClutteredGarage]

Thank you and welcome!

[@otisbailey5455]

Didn't think I wanted one before watching video. May give one a try.

[@MyClutteredGarage]

Super handy!

[@liamsherwood7507]

Great video. I struggled putting on my brush hog implement. the quick hitch may be my next purchase. Thanks for the info.

[@tonybackshall5001]

Hi I've had my kubota b2601 for a bout 2 years I bought the land pride quick attachment I find it's easy and I love your show I'm in Perth Western Australia

[@MyClutteredGarage]

Hi Tony. Thank you so much! I’m really glad you’re here! -Ed

[@jameskeough4620]

Thanks for the vid. Well done.

[@joesteinke8760]

Same here they work well !

[@tomfillmore9710]

great review on the quick hitch thanks for sharing have a great day

[@MyClutteredGarage]

Thanks very much, Tom!

[@aerospot2]

You have all the good toys

[@thegreatnorthwoodswithbb6513]

Thanks for mentioning the price for the Land Pride quick hitch very helpful information

[@TomBTerrific]

I’ve got the harbor freight quick hitch. I thought it was good enough until I tried to hook up my bush hog RDTH 60 finish mower which is the most common implement I use. The same issue you had with your. I also needed to go buy some bushings for the bottom two links. Update- I was speaking with a friend and he recommended buying a longer top link. I’m going to give that a try ! Hopefully that will work.

[@TheTenthManOnYoutube]

I'm not knocking the quick hitch but anyone considering needs to check out Pat's Quick Change. It's simpler, and more versatile because the spacing isn't fixed. Add Mark Hodge's telescoping stabilizer and it's even better. It will cost more, but will connect to anything.

[@MyClutteredGarage]

I’m familiar with Pats Quick Hitch and I’d definitely like to look into that. Thanks for watching.

[@gregzais9248]

I really liked this review. I thoroughly identify with your comments and approach having experienced many of the same frustrations and learnings (by doing and failing). Your comments about being on a flat surface is key. I have a home in the Adirondack Mountains and have almost no flat land. So I have learned the hard way. I look forward to exploring more of your videos. Best regards, Greg

[@MyClutteredGarage]

Thanks very much!

[@nunya8048]

Learning as you go is how i learned...just like gettin larger pin adapters...all 3 points make contact

[@jeffreyfischer8782]

I really liked using the harbor freight quick hitch, I had it for years and accidentally left it on my last move.

[@RovingChestnut]

Looks like a very capable piece of equipment 😎👍🏻

[@MyClutteredGarage]

Roving Chestnut indeed it is! Thanks for watching!

[@darryldoty5879]

At the end you should include the PTO shaft 4 inch extension. Thanks for the information.

[@peacefieldfarm_mn]

Great video Ed! You hit on all the important points. I too have the Land Pride tiller, and yes it is a royal pain to hook up to the 3 pt. I also got a quick hitch, but I went with Pat’s QH. I’ll be doing a video about that soon. As with anything that design has its pros and cons too. Be well Ed, thanks for editing and posting. Cheers!

[@MyClutteredGarage]

Peacefield Farm_MN I like the idea of Pats QH, but I’m sure they bring their own set of challenges. I’ll look forward to your video. Thanks so much for watching and commenting! -Ed

[@k6outdoors]

Many people good give feedback on the harbor freight hitch. Great stuff!

[@MyClutteredGarage]

Thanks!

[@tacomafan7488]

great video sir! i have same problem with hf hitch and LP box blade! top latch lucked but 2 bottom ones where not in! i ll adjust it tomorrow!

[@adamganong683]

Great video. Thank you.

[@MyClutteredGarage]

Thank you, Adam!

[@gregbakke8296]

Great honest review. I'm looking at getting my first compact tractor and a rear quick hitch seems like a must.

[@MyClutteredGarage]

It makes a BIG difference with many attachments. Thanks for watching.

[@johnenwright8617]

I picked up the same one. Instead of putting bushings on all of my implements, I found a couple pieces of pipe with an ID of 3/4”for the top and 7/8” for the bottom. I cut the pipe in half lengthwise and then in half the same width of the hooks and welded them into the bottom of the hooks like shims/saddles so when the standard pin lays in the bottom it mates up firmly. It works perfect. Seemed to make more sense to modify one part instead of several others.

[@MyClutteredGarage]

Thanks John. That’s a really smart idea! -Ed

[@tractortheoutdoors5148]

You got a picture of that setup

[@BrentConwaylds]

I have a Harbour Freight Quick Hitch for my BX 23s, great price solid hitch, love it. Need another one for my second tractor a B2601 but I live in Canada and the border is closed.

[@OleStanman]

Thanks for the informative video. I was looking at the quick attach hitches and was thinking of the Harbor Freight unit as it was much cheaper than the other name brands. I see that the hitches are all pretty much the same design and your demo helped me make up my mind. I just subscribed and really like your style of presentation.

[@MyClutteredGarage]

Thank you, Stan. I hope HF modifed the top hook. That's really the only problem I've had with it. You can get a replacement top hook from boltonhooks.com if you need. Much appreciated. -Ed

[@thetinker3924]

I got some spacers from Tractor Supply. You have to move the hook to the top position so it don't come out.

[@outdoorswithlarryrobin]

Hello Ed from Northern Virginia, just subscribed. Take Care and be Safe 🚜🪵🇺🇸

[@MyClutteredGarage]

Thanks for the sub! Much appreciated!

[@wesleyharding7544]

Great vid thanks.

[@MyClutteredGarage]

Thanks for watching!

[@gebronthomasson6960]

Thanks for the share..put your implements on pallets or something like it..

[@BH-wt7im]

Some quick hitches out there have a flat bar that pins in above the hook and then pins to the top of the 3pt for situations like your finish mower. If you can find a fabrication shop in your area, they could probably fix you right up. I don’t have a quick hitch personally because I have many old attachments and some homemade that would have to be modified to work but I’m working in that direction. Thanks for the great content.

[@MyClutteredGarage]

Thanks very much. Good info!

[@KenAmmon]

Thanks for your videos. I just installed a HF Quick Connect on my B2601. It went on quicker and easier than I expected. I'm glad I watched your video first before renting a rototiller, the quick hitch will be a welcome attachment and looks like it should make attaching the rototiller much, much easier. I was dreading having to finagle that thing on and off. Keep up the great work Ed!

[@MyClutteredGarage]

Thanks Ken. It will make a BIG difference!

[@jtyler780]

Share your frustration with the rotor tiller connection. Absolutely maddening. You said, “now all that is left is connecting the PTO”. That is one of the hardest things to do.

[@SandyMasquith]

Thanks for this great content! I’ve been considering the QH. I’m such a rank novice with this tractor (I have the same one you do). I have yet to figure out how to detach the digger bucket. I actually have a few more summer jobs for the digger anyway, so it’s going to stay on until spring anyway. I was thinking of QH and a tiller and a chipper. That will be my winter research task!

[@MyClutteredGarage]

Thanks for your kind comments, Sandy, and good luck! You can't go wrong with a tiller and chipper. Great attachments!

[@tsafa]

good vid.

[@kleetus92]

I am so glad to see I am not the only person swearing at my tiller when it comes time to take it on or off. I have no idea why the hell they made the 3pt arms so short on these tractors.. a couple more inches would have made life so much easier. If I manage to get the tiller attached the next battle is the PTO. Once it's connected it has plenty of travel, but getting it on, sweet Jesus I was going to attack the female end with a sawzall and cut an inch off the tube for more clearance.

[@COUNTRYSIDELIVINGWITHUS]

Video are great!!

[@dougsmith1622]

There are adapter sleeves that you put over your category 1 pins to make them fit the cat. 2 hooks on your quick hitch. They cost around $40.00 for a pair. You will need a pair for each implement you want to attach to your quick hitch.

[@ronbrennan358]

Another guy got a link to attach to the top link on the quick hitch. Look for his video on you tube.

[@johnlong3102]

You were showing how the Harbor Freight quick hitch worked. I have a Massey Ferguson GC 1725M and I use the Pat's quick hitch. I really like them.

[@MyClutteredGarage]

I think the Pats system looks great. I haven’t tried one yet. Thanks for watching.

[@wlsteffen]

One more thing, while mowing grass with the loader on I was lucky enough to see the loader pin on my B2601 fell out. I was very lucky to have no damage. What I did I went to Fleet Farm store an bought 2 shaft collars for less then $2.00 a piece. The shaft collars are 1/2” thick 1” in diameter with a 7/16 hole. I put this on the bottom of the 3/8 shaft and tightened the set screw. Now the is no chance the pin can come out. I’ve seem Other people wasn’t as lucky as I was and had considerable damage to the tractor. Wayne from Wisconsin

[@MyClutteredGarage]

Good catch, Wayne! Thanks very much. -Ed

[@mdh7812]

I have a SpeeCo E-Hitch which doesn't need the adapters/bushings. I paid right at $130 for it. One of the best things that I have gotten for my Kubota L3901DT.

[@turbosmom99]

Where did you get the SpeeCo for $130? I just bought the same tractor, except it’s HST.

[@1990notch]

The SpeeCo E-Hitch is about $400 everywhere I've looked. You must have bought it a long time ago.

[@garyolson7021]

I bought a extended top hook from Amazon. Cured a number of quick hitch issues.

[@bobbennett3153]

I have had old implements that do not itch so I have went to the pat EZ hitch this allows me to use a post hole digger all other implement

[@joesteinke8760]

Pro tip move that top hook out and weld it . Works great then .

[@curtiscampbell4735]

Get a hydraulic cylinder to replace the manual toplink and tilt all the way out when attaching tilt back in while lifting 3 point and it will slide right In

[@kevinklingner3098]

That's what the adjustable top link is for you may need to adjust in or out a long way. You may need to hit parts with gas torch or angle grinder.

[@neilwatts629]

For the center link for a quick hitch install a ball attachment at this point. You should be able to by this a tractor supply or any ag dealer they come in different sizes to fit the quick attachment.

[@alanhoweth9859]

One very important issue not mentioned which I found to be difficult. You must back up squarely. Squarely back into the implement or getting it connected is a bit hard!

[@rexdelong9447]

like your channel, I got a new top hook for my HF quick hitch on Amazon, its about 3/4 further out than the one that comes with it,it fit perfect no drilling needed, fit like a glove.

[@MyClutteredGarage]

I’ve heard about that new hook. Might have to give it a shot. Thanks so much for watching. -Ed

[@rgrubbs]

Have a link for it you don’t mind sharing?

[@BillKibbons]

To make it easy to attach coupler hook up top link first.

[@NHHalKnowsHow]

If you're looking for frustration, try attaching the backhoe on uneven ground. That was so frustrating I almost picked it up with my bucket and took it to the driveway. I'll never take it off on an odd angle again! I have the Kubota B2920. I love it!

[@tennray]

Dont feel alone!!! same thing before and find a flat piece of ground in middle Tennessee!

[@randycooper2046]

I have the land pride version and I have pins, not bolts, in the upper hook. If you arise that hook up higher it will work just fine with the finish mower and the pins make it quick and easy.

[@richardschaffling9882]

Good video

[@MyClutteredGarage]

Thanks very much!

[@thomasgargano8813]

Boy O Boy you made my life lot easier, I was having same problem with my Trackers PTO it’s little to short and hard to get to, now I know to get that PTO extension and the quick attach system. Thank you very much for this video. 👏👏👏👏👏👏🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🍺🍺🍺🍺🍺🍻🍻🍻🍻🍻🍻☮️

[@jimbennett1519]

I got the Pat’s quick hitch system about 6 years ago and have no regrets and would do it again. Real EZ too hook my implements up and all my implements it matters not

[@forry100]

Problem with Pat's is you still have to get off to hook top link.

[@jimbennett1519]

@@forry100 yeah that is very difficult lol

[@RCAFpolarexpress]

Good Morning Ed 👍 Congrats on your 200 Subs Ed 😊👍Great trick on the strap back removal 👍at less than 100 $, that is great deal 🧐😊👍Great sence humor Ed 👍Great information and review 👍 You respect your budget and I'm pretty sure that the Minister of Finance was happy about that too 😊👍Great video Sir and keep up the good work and have a great week Cheers !!!😊👍

[@MyClutteredGarage]

RCAFpolarexpress thanks Dave! I can always count on your kind and thorough comments! I can’t keep up with you uploading content but we’re all having fun, right? I enjoy your projects! 👍👍👍

[@RCAFpolarexpress]

@@MyClutteredGarage Good day my friend, yes and that is the most important things to have fun in life 👍😉 Starting this week, I will make less and less video's, since it is recurring events ( logging, gardening, house maintenance ) but I will have some good video coming up that I kept under my sleeves,,, Cheers 👍😊

[@jokinjoe9447]

They also have a lot more products you may be able to use like lower pins and cat 2 @ 3 collars for hitch...

[@michaelbreshears3745]

On the finish mower you most likely need to move the hook up on the quick hitch so it grabs the bar tightly and doesn't allow it to roll out when lifting

[@bluekingfisher1416]

Just came across your channel and subsequently subscribed. Some interesting info on there as I have been considering buying a sub compact tractor. I am on just shy of 3 acres so not sure if I really need one rather than just want one. Anyway, I enjoyed learning from you learning. Greeting from Scotland by the way. Thanks again, keep up the good work.

[@MyClutteredGarage]

Thank you for your kind comments. I think you need a compact or subcompact tractor 😉 Glad to welcome you! -Ed

[@imageguyimageguy1316]

on the mower. move the pin on the end to the middle and raise the quick hitch top hook higher? maybe

[@MyClutteredGarage]

I’ll take another look at this. Thanks for watching.

[@gtuttle4]

You need bushings for the top link pin. They will make it a much tighter fit.

[@MyClutteredGarage]

Thank you, Gary.

[@brents1643]

I like your videos.

[@MyClutteredGarage]

Thank you, Brent!

[@HardyBrothersOutdoors]

when not using the quick hitch, try adding a spud bar to your arsenal for man handling and pushing/pulling attachments... works really well.

[@jimmielittle877]

What's a spud bar?

[@HardyBrothersOutdoors]

@@jimmielittle877 google spud bar. It’s a long steel bar that in my reference above you’d put against the ground and use leverage to shift and move the heavy piece of equipment... I show it in episode #49 on my channel.

[@jimmielittle877]

Thx

[@garryquiggins8183]

I just use a 6ft 2x4, works fine and there's also one around.

[@utubota5522]

I bought the same QH you did. I have implements from probably every manufacturer ever in business. Some are old, and not necessarily QH compatible. As a result, I welded the top connector on the QH, as the mounting bolts kept getting in the way. I did have to modify a couple of older implements, including my finish mower. My finish mower is designed to float, so it required the most adjusting. Once I completed all of the mods, everything continues to work gets. I used BI pipe as bushings for the lower pins. Cheap and easy. Thanks for the review.

[@kylerayk]

I have 2 quick hitches. A Harbor Freight QH on the old Farmall C and a Farm Hand by Lee on the Kubota M5660. The HF QH has been in use for about 6 years and has functioned very well after I made a few "adjustments". First one was the top hook situation. I welded a block on the backside and re-drilled the holes so that the hook projects out from the QH frame by 3/4"-1"...can't recall at this time how wide I made the block. This made all the difference in the world and I see that Ken's Bolt On Hooks now offers an aftermarket top hook for the HFQH. I also replaced the bolts that hold the top hook with quick pins. The second situation that I discovered just last year is that the lower pins supplied with the HFQH are too small. By this I mean that they are less than 7/8" diameter which is the CAT I standard. I believe that they measured 20mm (0.787") so they were sloppy in the swivelly balls on the draft arms. To correct this, I bought a new set of CAT I lower pins from Blain's Farm and Fleet and then modified them to fit into some new tabs that I made from flat stock with a bend in them to wrap around the QH frame just like the original ones. Next, I drilled out the holes in the QH to 29/32". Reassembled everything and no more sloppy fit. The Farm Hand by Lee is bullet proof right out of the box and will fit a CAT I or II tractor, has an extended top hook with quick pins, has a welded on 5/16" grab hook on each side, and 3 Reese Hitch sockets welded on that you can affix bale spears or any number of things limited only by your imagination. It came with a box full of pins and bushings and the fork type attachment for use with implements such as your finish mower with the floating top connection. Made in the USA for $687. As you discovered, bushings are necessary for the lower pins to fit properly in the QH. SpeeCo now makes a QH with lower hooks that fit 7/8" pins directly with no bushings required so it can save you a bunch of money in bushings if you have several CAT I implements. I am a machinist so all my bushings I make myself and are FREE.

[@MyClutteredGarage]

My first job was in a machine shop. Such a great trade. Thanks for sharing! -Ed

[@MDR-hn2yz]

I just got this quick hitch from Harbor Freight. Well worth the $120 I spent. Feels solid, locks up nicely and was a breeze to install. I just need to set up my attachments.

[@MyClutteredGarage]

Mine is holding up well! Thanks for watching.

[@dougsmith1622]

Well, I see you have already bought the adapter sleeves. Forget my earlier comment.

[@keithrayeski3147]

Of course that’s all negated if you have a subframe backhoe attached? Still, worth the investment at more than three times less…it’ll work just fine!! Great video!

[@jrbrumley9334]

Hi, I have a B1550 Kubota and I have a rototiller that hooks very similar to yours. I don't have a quick hitch and you are 100% right, it is terrible to hook up. A problem that I think I might have is that my lower arms on the Kubota won't "spread" very wide and will have to do some measuring to see if this would work for my machine. This is a great video and you did a good job showing and explaining the quick hitch and how it works. Thanks, J.R.

[@MyClutteredGarage]

Thank you for your kind comments. -Ed

[@Theywaswrong]

That Harbor Freight upper hook is a well known problem, but it can be overcome if you want a cheap quick hitch. There are hooks on the market that also fix it. What is puzzling is this has been a problem with the HF quick hitch now for years and you would think they would modify the hook. But there are ways to get around the hook problem without spending money.

[@MyClutteredGarage]

Thanks. You would think they would correct it, but maybe retooling is too expensive for them.

[@henryrangel7354]

I just got one of thooand the upper hook won't link up to the pin on my land pride shredder...any ideas

[@deanmoore420]

Hi run a John Deere 2038R and I bought that I match hitch from John Deere I believe in buying the name brands I have no problem hooking up implement with my tractor

[@Wheelloader__]

I'm glad you had luck with your quick hitch. I bought mine on amazon. It's sitting in the corner of my garage collecting dust. Won't work on anything I have.

[@MyClutteredGarage]

Sorry to hear. You know Amazon has a great return policy. Thanks for watching.

[@flash1259]

My first experience with the quick attach was the old Farmall 300 2 pt. hitch row crop tractor. I didn't check out the quick attach because I just assumed all my old equipment wouldn't work with it. When I finally broke down and replaced my old Ford 6600 with a Kubota 3901 and got tired of fighting the equipment to hook it up by myself I finally got the tape measure out. I got lucky and realized my assumptions were wrong and the few pieces of equipment that I have would work. I bought a used quick attach for $200 and used bolts on the bottom links and double nutted them. It turns out I could have bought a new quick attach at the place where I bought the tractor for around $30 more that came with the bottom pins. Oh well, at least I also didn't have to pay taxes on the used one.

[@jstersam3676]

thanks

[@MyClutteredGarage]

Thanks for watching.

[@deerrudy]

Thanks great video. Good information and honest review. Seems like The Good The Bad and The Ugly with the Harbor Freight quick hitch. I was on the fence would have seen similar videos and that seems to be the recurring issue with this hitch. I think when you start adding up the category 1 pins and you have to add and well as modifications all of a sudden it doesn't seem like take a deal. I guess if you're a welder in like the tinker and mess with things you can modify it and make things work. I do know there are other quick hitch Brands out there which do not require in the modify the Cat 1 pins. I think there's a top link extender which could possibly work to fix one of your issues. I also saw a video with someone grind it down that top hook on the quick hitch to make it work. Anyway I enjoy the videos keep them coming. Thanks

[@MyClutteredGarage]

Thanks very much for your kind comments and thanks for watching! -Ed

[@charleslawson6377]

Shot quick I believe is the name.this was a guy.That was having problems hooking older equipment to quick Connect So he made an adapter plate that replaces the hook I believe it's under $40

[@mellodhillcountryliving]

I bought a Titian Equipment QH and it looks the same as yours and I think I paid about 195.00 for it. I also had to buy the pins to fit some of my equipment. I did not know HF sold these.

[@r.l.mashburn4851]

You need class 3 bushings

[@edwardedling216]

A landpride quick attachment was every bit 4 times what you paid and probably weighs 3 times as much.Worked for a dealer got one at cost but used,and it's off more than on my tractor

[@deanbarr5740]

Thank you so much for your quick hitch experience. I'm having the same issues. I probably over paid for mine. I ordered my hitch when i purchased the tractor from the dealership. I never thought about picking up an extension for the PTO. I use the my hitch on some of my implements but for my older implements the driveshafts are 8"-10" to short. Your video fixes my problems. New subscriber "here" thank you very much.

[@hectortn4]

I would like to inform you of the PTO LINK company has an easy to quick connect for your equipment and it does interfere with the pto shafts.

[@truckerray7533]

Ive got the quick hitch from john deere for $200, for my JD 1025R

[@number1hvac]

I don’t know if you have seen it or if someone already mentioned it in the comments, but you can buy a deeper casted too hook on Amazon for 45 bucks. That’s half the price of what I paid for the QH but if it means I can hook up all my implements then I’m still happy. It will be here on Friday and I’ll update you if you like. Great videos!

[@MyClutteredGarage]

Thanks very much. I recently bought an extended hook from Ken’s bolt hooks. Makes a big difference!

[@number1hvac]

Good deal!