16:1 first no baffle test 41mph + blowing a gas tank!

I take the 66/80cc Hyper Cruiser out for a shakedown test.
The old guy has a trash bucket stuck under his car.
And how to destroy a gas tank.
PARTS LIST + Links
Frame: Hyper 26" Cruiser - Black- amzn.to/2D12KIc
Blue- ebay.to/2SHs9Mq
Engine: Zeda-80 66/80cc 2-Stroke - ZedaMotorsports- bit.ly/2RHwbai
Amazon- amzn.to/2FmpSSZ
Ebay- ebay.to/2RoFrRC
Upgrates: PUCH moped head - No Gasket- bit.ly/2SMLnQP
O-ring gasket- bit.ly/2FnGUjz
Seat post mount tank - Ebay- ebay.to/2Fomyqo
Amazon- amzn.to/2VH9nH5
44T sprocket + Hub adapter - ebay.to/2D18v8Y
MotoredLife.com building quality motor-assisted bicycles since 2012.
Check out ZedaMotorsports.com for insane race parts!!!

[@andreymanakov7313]

I and my friends did the same kind of DIY projects with motorized bicycles back in days in the 1980's in the Soviet Union. it was really fun.

[@keegansponholz9260]

I love the look of this one! Keep on building!

[@ElsayElmack]

YES MACK LOVE IT ! Cant wait to break mine in !!!

[@jameshagen6590]

I think your videos are awesome dude you rock wish I had that kind of energy after racing with Jerry McGrath on the point of the Mountain Loop and hang gliders I'm very impressed God bless you for your post and Keep On Truckin you rock pal

[@bernardolivera2871]

I finally got my bike running. With the HP carb. it starts up, runs better and has less vibration than the other 3 motors I’ve had. I heard you call the bike the Hyper Sleeper so I decided to call mine the Hyper Brickyard Chopper because of the brick colored tires and triple tree fork. For now I’m running it at half throttle, for a few tanks and I also like to let it warm up for a minute or two. Great videos!!

[@moiusa]

I love your videos, keep them coming porfavor.. Thank you for sharing. 😊

[@niteshades_promise]

yeah 40 mph id ware gloves boots leather jacket AND A FULL FACE HELMET. too many soccer moms driving suv's while on the phone and youre harder to see than a motorcycle🍻

[@shocking8278]

^

[@andys4971]

Yeah bro, I know that thing is obnoxiously loud but the soccer moms are dangerous. I have to drive my 4 stroke with a silencer like I’m literally invisible so I don’t die

[@Iamcartmanxd]

I dumped my bike when the pedal chain fell off and lost my brakes, got a concussion and scraped up pretty good! Definitely ride with a helmet and a good jacket, especially if you only have one brake!

[@BillyMcBean.]

@@Iamcartmanxd how did you crash? just couldn't stop?

[@Iamcartmanxd]

@@BillyMcBean. Yup, coming over the top of a huge hill and the chain had slipped off so no brakes. Had to bail into the sidewalk and hit a retaining wall.

[@h2owarrior1]

Keep up the good work man! I point ppl your way all time. When I finish my trike build, I'll share! ;-)

[@martinoffi9249]

Awesome extra footage!

[@novavroomvroom2979]

Use a piece of inner tube between the tank and the frame.... you'd be amazed at the results....tank stays in place,,, ONLY have to tighten tank bolts once

[@brianmccann666]

100% true

[@a1930ford]

You can also use some 1" shrink tubing and use it instead of an old inner tube. Just lay it flat and it cushions the tank very well. Also comes in handy if you have to quieten the supports where a fender is held in place.

[@civilsocietyprivateinteres1711]

Did this in 2008 bolts are still tight used rubber between motor mounts too help with vibration a little but stock bolts sheared had to tap up to the next size. Got a startfire gt4 66cc

[@Sarasdad91]

Man that thing is kicking ass. You did a hell of a build on that. Most I see only go about 20MPH, U were keeping up with the cars. Kudos to you

[@baybuzinezz9690]

I mine goes 40

[@motoxmini3196]

Bro the bike was sick, sounded pretty dam close to mine , great job for getting a bike like that stock, I agree on #1 part a must have hub mounted rear sprocket, but nice cruse man looked like a lot of fun, made me watch my old ones, I need to build another one! You still riding

[@jamielamie2229]

I LITERALLY JUST BOUGHT THAT SAME EXACT BIKE FOR MOTOR CONVERSION !!!!! It'll be my 3rd build :)

[@derekcole6632]

Oh hell yeah Alex got the hyper going. I love this bike. This is the same bike I have that ive been wanting to see more of from you. I only get going about 20 mph cause my motor is cheap crap pk80 and I don't have a hub adapter yet. Nice build bro.

[@benhawke7231]

Put some rubber grommets under the tank to compensate for the vibration. That's what I had to do.

[@joeMW284]

I usually cut up the stock grips for this. They can also keep the chain tensioner from flopping around.

[@TheProspectormike]

fix the problem at the source don't try and patch it the bad vibrations come from chain with them cheap chain tensioner remover that junk make it right without that junk and we are talking 100 times improvements from having junk on a build to doing it right also rubber on the motor makes it worse i used to think that it helped but it don't its only a patch and is bad on your motor to have play .. I went 587 km in 2 days and i know for fact with stock setup theres no way the bike in the video would make it 200km without falling apart lol

[@ericb46]

I always use the rubber tool liner, you can get it at walmart

[@richardventrello6365]

id like to know the specs on the bike? 41 mph would be great for going back and forth to work!

[@tymccoy6875]

ooo imagine the sound of it shifting

[@warumdehbwoi]

You what

[@hugochavez4150]

What I do is I install the tank mounting brackets on the tank tighten them down then I set the tank on the frame using zip ties over and around both them mounting brackets.2 zip ties on each brackets

[@willardbuchanan9122]

I just added new Chopper bars waiting for some aluminum throttle grip to come in the mail soon and I'm running a 32 tooth sprocket gear

[@jonnyrox116]

I used to cut 1 inch rings out of old rubber grips and put a couple on the backbone under the tank to dampen vibration. I hate those goofy looking tanks, about 1 in 5 leaks around the studs or the studs rip out completely. If you can't afford a tank frame go with a seat post tank, I shorten the extension tube so they don't stick out so far over the rear wheel.

[@liamsmith5976]

Put mine together today and it’s the best thing ever

[@jljohnson6065]

Hello,can any one tell who makes these motors, I need the wiring diagram, Please?

[@johnbasten4077]

Hi great vid,can you tell me what make of the chain tentioner. To buy to replace the crap one they send you

[@almostsapien]

How do you take the internal parts out of the exhaust? I removed the cap on mine, but the stud that holds the pipe on is still inside and pokes out the end of the pipe.

[@donttakebiscuitsfromelmo1931]

I have the same hyper cruiser bike but what I did was I chopped down the seat tube to make the seat sit lower, and I took apart the seat and took out the springs so it was much lower, and I flipped the handlebars so it was a downward racing style bike, I also took off the crank assembly so it isnt a bike anymore, and I put pegs with a rubber spray coat on the back for a grippy place for my feet.

[@kristinholcomb6690]

I have a 1960 Schwinn fleet all original down to the rubber, minus it's needs a little tlc conditioning. The question is I want to do a restore/80cc conversation and my bike looks about like this, should I do it or will it be a disater, any tips and advice

[@russelldavis8954]

have the kit installed but the clutch won't disengage any help??

[@dmitrypesko]

I have the same exact bike I will be putting the engine on. Did you have to bend the muffler?

[@aaronslusher9531]

Loving your channel. As a newbie, I'd love to see more of the 101 type videos, maybe I'll keep from doing everything on the bike incorrectly. Thanks in advance!

[@MotoredLife]

Aaron Slusher will do!!

[@SOMFification]

what kind of bike did you use for this build?

[@willardbuchanan9122]

Have you tried your new hit copper head gasket yet I have a 2 mm and a 4mm head gasket the 2mm was the best performance

[@willardbuchanan9122]

Okay it just fine you posted on KZbin for the throttle upgradeI did on my bike

[@willardbuchanan9122]

Alex. The gas tank plate Mount on eBay I think it's like 15 bucks I can't remember exactly how much you drill two holes on the top of the stair bar in front of your handlebars through the frame but I don't know if you want know where do something like that but it will hold the tank and place without ripping the studs

[@seanattocknie2357]

Cool bike I got one coming tomorrow I can't wait and you was having a hell of a time riding to huh until that gas leak happen. Lol been there done that

[@Miklalo]

Awesome video I got my motor just toke it out for a test today

[@andyjacobson8076]

Toke it ... don't stroke it ...

[@flyinggoggles1485]

what motor is that? i saw 80cc stroke bike motor on gearbest with 30km per hour maximum speed, which is like 19mph.

[@saucylemon7756]

in the description buddy.

[@staceystarling15]

I've tried converting my coaster to freewheel by removing the clutch spring & inserting like 3 washers but still have that annoying pedal play when u want to go.cant have that, need immediate response when i meed to go.so I just greased the hell out the bearings (had to do EVERY MOVING BEARING,they were all bone dry) and reassembled, just going to hope it holds at top speed. I'm out of tricks and hate coasters & rims ain't cheap..

[@JayDee-eu7hr]

Hey man just wondering if anyone had mentioned changing to a 13 tooth sprocket on the front ? I can’t find much about experimenting with different sizes on the front aswell ? Any feed back would be great thanks!

[@kevmurf2028]

What motor is this and where do I get it? Very cool as always with your vids. Too many people out there yap on and on. You Ride.

[@eliezerreyes8806]

Noise reducer in my baffle job done cut out metal screen with hole place first inside muffler then put another screen with hole surrounding the muffler with aluminum surrounding it this will make a baffle / muffler tip sounds great

[@slaphappy1951]

What motor kit did you use on that bike? I did the same bike with my son. Used a chinese motor kit. Seems to have lost a lot of top end recently.

[@kenttyler1243]

Nice bike! You don't need to make your mix so rich, 16:1 will just gunk up your exhaust pipe. Try 24:1 for break in and 32:1 after. Also, if you want to reduce vibration get a better pipe, an expansion pipe will give you a little extra power too!

[@littlek0690]

Was this engine that you were testing stock or modified please get back to me might want to buy this motor would you recommend is it good for the price.

[@solsunson262]

yep...2 strokers & suspensionless framed bikes....are hard on motorised bike " add-on" gas tanks..

[@chicopagan9928]

How you install a clutch on a motorcycle bicycle

[@armandsdunajevskis4722]

Love it! I got the same Hyper bike and I am thinking to convert it to electric, but I have question regarding front fork and brake-outs: how do they feel after high speeds did you enhanced them somehow? Thanx

[@MotoredLife]

Get a triple tree set. Waay better. The stock ones do flex

[@PLATESWEEPER]

Guys I need help. I have a zeda tripe 40 and it rides great at the beginning of a ride but after about 3 to 4 miles the clutch gets really hard to disengage and really hard to pedal from a dead stop. The flower nut needs adjusting after every ride. Is this normal?

[@robertclark1868]

Mine is doing same thing! I have two zeda triple 40 and on is doing it. About to order new clutch pads.

[@mvelazquez312]

what size frame did you use?

[@TheProspectormike]

your problem is your using a chain tensioner if you want a smooth ride you must adjust motor to tighten chain and use no rubber damping everything must be tight to frame even use a ubolt to hold muffler to frame where its close to frame talking night and day kinda stuff

[@karenjennings9239]

What about the vibration it's rough

[@BillyMcBean.]

@@karenjennings9239 use thin rubber between the motor and the tubes, don't use thick rubber especially those ones on amazon that are shaped to fit 2 stroke motors, it'll be too loose

[@ericb46]

can I get a link for that 1 gal gas tanks please

[@landonsmith9384]

What is a good fuel oil mixture to run on a 66cc bike thats mostly stock? Also what is a good oil to run or would i be ok using the same 2 stroke oil i use in my 2 stroke lawn equipment?

[@codelicious6590]

Landon Smith most kits call for full synthetic two stroke oil and 16:1 for first tank break-in, then 20:1.

[@adventuresofpyro9020]

I just found your channel and I happen to have the same bike! Just bought it the beginning of this month. Mine is a 2 stroke 48cc though. It was bought brand new and some guy where I am now put it together. It's kinda iffy. Having all kinds of issues. Not sure if my fault or the guy that built it. I happen to notice you are in the area I grew up in (well not 100% the same area). I was wondering if you had some kind of way to message you and talk business? Also you just earned a new sub ^_^

[@staceystarling15]

yo alex, how did the Puch head affect the gas tank, what was it just too much compression or vibrations? trying to learn what not to do on this build cause this hyper project inspired me,& this is the build I'm doing also. this bike's just made for a engine. tho I still get sketched out just flying down these hills, i get up to 40 pedaling downhill.mainly worried cuz I'm afraid of tire seizure or bearing failure cause after all it IS a wallyworld bike.but so far holding up, any tips to watch out for with this build. I know the chain guard issue so far, may notch it and keep it

[@MotoredLife]

Too much vibration from the compression. It was almost at 240psi

[@Finley0312]

What rear sprocket are you running to get up to 41mph? Mine does like 28mph all out.

[@JamesPiccone]

36

[@MrPunkrocker2012]

I use the grip from the stock bike cut a slit n stick it on the top tube under the gas tank

[@willardbuchanan9122]

Completely understand that situation yes I did check to see how you are doing I'm sure it's been tough with your mom gone do you ever figure out your idle problem on your bike I might have to change the air filter to it would like that Gray air filters are material type and went you like a charcoal black air filter and it's all gone there the cheap air filters are garbage I noticed basically suffocating the motor in too much fuel after I realized it right now change the air filter out it took care of problem

[@willardbuchanan9122]

Hey that's totally awesome

[@a1930ford]

So, how do you keep your bike from being stolen when you park it somewhere other than your house?

[@MotoredLife]

Bike lock. Remove ur plug wire. Un hook your clutch cable. Turn off the gas. Park in front of video cameras

[@andrewcampbell4183]

Hey man I’ve just about finished the main but if my bike and only plan to put performance upgrades on it from this point on but my bike seems to not want to stay top speed, it will go 45-50 kmh but only for 2-3 seconds before the engine slows down a lot then it speeds up again. This is a new issue that just popped up, the bike also is very jittery at low speeds, the bike isn’t running Rich or lean and the only parts that haven’t gone out yet are the CDI, spark plug, and magneto. Any help or info would be much appreciated

[@ganeshnarayan5505]

hey dude great video just wanted to know where did you by the carb.let me no when you have time. thank you

[@MotoredLife]

The carb? It came with the kit

[@staceystarling15]

Oh wowzers. that'd be good n all if everything would hold.i was thinking instead of double sided sticky tape,which I don't think would work so good, instead cut strip of old inner tube and use it . What's ur take on that.tried it b4? if I didn't rip the mounts out, not over tighten it u know. seems logical.may help grip plus reduce the bad vibes. trying to keep bad vibes away from me ha

[@jayb7942]

Alex: how did you get the chain to not rub the rear tire..before i found this video i had ordered the same bike. I just mounted motor today and ran the chain and holding it tight it is real close to touching the rear tire (still need to remove 2 links). I already tried shifting the rear tire away from the side the chain is on and tightened but still to close. Any help from anyone would be great, was thinking if it was possible to add a few washers behind motor sprocket to bring it out?

[@jack5394]

For my bike I readjusted my motor to line up a tiny bit and tightened the chain as far as I could. It helps not hit the fenders when you hit bumps

[@billystewart5799]

Hopefully you figured out how to shim the back wheel by now...😉

[@VirantRoss]

*WHAT IS THE BEST CHEAP MOTORKIT FOR A NEWBIE BEGINNER? I have a Micargi Falcon I want to motorup but, im afraid to pull the trigger and not be able to install it..* wanna stay cheap

[@mattsimonds477]

I got an 80cc motor kit off of amazon for 129. Looks just like the one in the video. It comes with everything. Also instruction manual.

[@foxman362]

I bought 80cc kit the upgraded version for 96$ it out of texas about 1week ago i bought it comes with manual i went with this kit the muffler i like it doesn't stick in the ground ebay.us/pL0cId

[@louperkins5497]

EBay.. I got an 80cc for 100 bucks... Solid cylinder and head are one piece. Good ports. Ready to go.. 28mph during break in. Got 40t sprocket. Hitting 34mph now.. More to come after I port and get an x chamber and new carb.

[@mvelazquez312]

with front shocks..make a great upgrade

[@nehmanator333]

possible to buy one of the bikes in your video??

[@joegrasso4086]

I have a motor bike and how does yours stay on without pedeling when your not on it ?

[@corbint3015]

I know this is 4 months old but most of these kits come with a clutch. So to have it running when parked you just put the clutch in and push down the pin that holds it in without having to hold it. Then assuming your carb is adjusted correctly it should just idle.

[@zacharyhuntsman7310]

After cracking so many gas tanks I found a little known secret, if you buy a pocket bine gas tank or any lawn mower gas tank that accepts lawn mower fuel line, you can oil up your motorized bike fuel line and shove it into the lawn mower fuel line, then use u bolts to mount a basket on the front of the bike and use cheap lawn mower fuel line to extend the fiel line. I've been going 1400 miles and not a drop has leaked out of anything.. probably also due to no dirt gets into my carb with the lawn mower fuel filter

[@teddysmith457]

I am new to your channel so I’ve only seen a few of your bills but I’m just wondering how come you don’t write any expansion chamber’s?

[@avaream4398]

Do you need the tension chain thinking

[@bobgorinski1914]

where did u get them tires

[@ezekielcoronel6515]

whered you get the exhaust ?

[@n0sgarage18]

How did you manage to get it this fast

[@robertrodgers8963]

Fuck yeah dude!!! I just got mine put together. First one, first ride was bad ass!!! It does want to take off!!!

[@darkroomignite8264]

Any ideas on how to muffle or silence the exhaust? Reduce loudness? There are many theories but I need an effective one.

[@andys4971]

You’ll lose horsepower but you can buy a more restrictive exhaust or a silencer

[@midnightangel4129]

Or just use the original exhaust with the cap on or one with a expansion chamber with a silencer. I like the original exhaust with and without the silencer from time to time, but of course it's not the most efficient way to go.

[@mrglass1206]

What would you name this bike? I have the same one but I painted the bottom of the frame a light brown and the top and bars silver. I removed the rear fender to give the rear tire more room and kept the front on. Finally I repainted the gas tank electric blue and double bolted everything to make sure it doesn’t fall off. I call mine “the shitter.”

[@Aaronzahller]

Do you think these wheels would last over time with a sproket adapter???

[@MotoredLife]

The wheels are pretty bad

[@chrislawrence6781]

What kinda bike is that. Specifically

[@chrisbacon131]

I love u dad

[@khiryjones5797]

My bike is put together but it's not cranking. What do you think the issue is.

[@NickyShweety]

test for spark doing an arc test with a spare plug

[@willardbuchanan9122]

hey Alex I just uploaded a new video about :415 chains and some tips and advice the chain I use 41- 415 heavy-duty nickel chain is now available on eBay again it's a little pricey but it works really well

[@rustyshackleford309]

Probably sounds cheap but i literally took a strip of one of those padded mail packages that one of my parts came in and slid that under my tank, still going 3 months fine 👍

[@BillyMcBean.]

yeah anything that will increase the friction between the tank and the tube, bike tire tubing work well

[@moddedcars8942]

my bike went 42mph tested with a scooter side by side. fully straight piped exhaust with off road tires. my new tires are smoother and i adjusted the idle so it might be faster now

[@moddedcars8942]

like i literally cut all the mufflers out. no restrictions

[@dimitrisgialouris1467]

How much gas tanks do you do for braking in and how you do braking in

[@PLATESWEEPER]

Dimitris Gialouris three gas tanks. Be gentle on the motor. Dont go past half throttle often and dont hold down on the throttle at a constant speed for more than 10 seconds. Blip it a couple of times when at a stop to circulate oil and cool the engine.

[@CM-ek6zn]

Did you have any problems with getting the chain not to rub on the tire?

[@MotoredLife]

Not if its tight and the sprocket is on correctly.

[@willardbuchanan9122]

I'm going to have a custom built gas tank for the hyper beach cruiser reasonable price of that back tank the temple slide in between the three main bars on front

[@roberthartsell4570]

In no

[@willardbuchanan9122]

Alext rear seat post gas tank trust me no problems no leaks mine works great

[@hymanocohann2698]

I get road rash just watching! Those look like Rough streets

[@-bitgaming-007]

Which is the best engine kit and does the best mean faster?

[@MotoredLife]

You look for quality. Hex bolts balanced cranks 8mm mount and head bolts. I like the triple 40 engines but others are good also.

[@asdf52708]

what's your setup dude? i have a reed cage, a big ass carb, high compression head, an expansion pipe, and a 40 tooth sprocket and mine can't break 35 mph!

[@MotoredLife]

This one is a zeda80 bottom and non ported jug. With one base gasket and 6mm copper head gasket. With a PUCH hi hi head. 10t drive 40t rear stock cdi stock carb in this vid now it has a cns

[@willardbuchanan9122]

Yeah my bike wouldn't idle like it went to die and have to hold the throttle open to make it stay running when I changed out the carburetor for the performance HP race carburetor

[@MACPAIN]

Tighten throttle cable

[@supersportryder]

The 4L tank is the solution, mounts from side lips of tank no studs to leak.

[@jgbelmont]

No baffle and no end cap?

[@Andrew-my1cp]

Just curious, but are you running 16:1 mix due to the lean air fuel ratio you get without the baffle on?

[@MotoredLife]

I do 16:1 for break in. Then 32:1

[@Andrew-my1cp]

@@MotoredLife Oh ok thanks.

[@pulesjet]

Is that a Zeda Engine ?

[@simonportelli147]

Do a review on a Cdh power engine kit? Or a petrol scooter engine kit.!!!!

[@glennlurman3514]

bolt the engine to frame with some antivibe rubbers. Look on the bottom of small portable generators for them.

[@Theganjlover420]

I have the dellorto sha clone carb with a 78mm jet and it won't go faster than 30mph. What's the issue that I'm having?

[@MotoredLife]

What type of engine?

[@Theganjlover420]

Bbr stage 3

[@hhhydra2397]

PLEASE HELP ME, I i set up one of these sets but once i attached the chain and put fuel in i couldn't move forward at all to start the engine. it seems that the engine sprocket doesn't spin freely and even by force it barely moves. This means i cant ride and start the engine. please help me, i spent a-lot of time and money on this.

[@MotoredLife]

Take it apart see what happened

[@hhhydra2397]

@@MotoredLife I opened the cover and it seems fine. Still doesn't spin freely though

[@chuckl.5595]

Guys the easiest thing is to just saw the whole muffler off. That’s what my friend did, hits 33+ mph running the stock 44t sprocket. I got a racing carb and a 36t sprocket off of eBay for under 30$ added 10+ mph and very easy to install.

[@roonimac]

what kind of bike is that