#161

[@KAMiJUINs]

Onsra Blackcarve 3 also was one of the most impressive boards of this year. The new TKP and the NX remote have shown a really satisfying performance. And, If you're a fan of Fabian, I think it's a board where you can enjoy riding more. [[[Onsra 5% off Coupon Code]]] - KAMI rideonsra.com/discount/KAMI?ref=HL6wXOQv 이번에 리뷰 한 Blackcarve3 역시 올해 가장 인상적인 보드중 하나였습니다. 새로운 TKP나 리모트는 정말 만족스러운 성능을 보여줬습니다. 파비앙의 팬이라면 더욱 즐겁게 라이딩 할수 있는 보드라 생각합니다. Onsra 5% off Coupon Code - KAMI rideonsra.com/discount/KAMI?ref=HL6wXOQv

[@eBoard3R]

⚡ *Beautiful review,* I suspected Orion entered the esk8 ESC market, thanks for confirmin it! ⚡ Loved the TKP truck comparison.Nice to see a Faster charger. Close-up shots of trucks when carving/turning 🤩 Classic washer flip over trick to make it a flat washer 👏🏼👏🏼 true skater style 👌🏼 With such a long wheelbase a flat washer on the front truck is nice. Surprised deck had no flex but the shape looks like it's good for carving. As always, I love the street wheels segment 🤙🏼🤙🏼 That slide out was fun to watch 😂 thanks for includin it! You have some amazin places to skate bro. I've been critical of Onsra before but this BC3 is a great improvement.

[@KAMiJUINs]

I haven't ridden the previous generation of Onsra before, so I couldn't compare or comment on the improvement. But BC3 was certainly impressive. And if you can come here someday, I will definitely take you to my riding place lol~ :) Thank you at all times, brother!

[@eBoard3R]

@@KAMiJUINs I appreciate that bro! and if you're ever in London I can show you the best bad roads 😂

[@ONSRA]

Great review 🤙🏽🤙🏽 Thanks a lot Kami 🙏🏼

[@KAMiJUINs]

Thank you for coming and watching :)

[@godfriedm9991]

The most attractive part is the newly redesigned remote controller which is a good selling point.

[@KAMiJUINs]

I think so~ Thank you for watching :)

[@chopstiickss]

It may be written down in the manual or not but I found a "cruise control" setting on BC3 Direct Drive. Accelerate and click power button at same time and itll hold the speed Click power button again to turn off or hit the brakes

[@Budamun_]

Thank you for this review, great work! Exactly what I was looking for! :)

[@KAMiJUINs]

Thank you for saying that and watching :)

[@samoonboard]

Awesome review as usual ! Keep up the good work 🎉

[@KAMiJUINs]

Thank you for coming brother~ you too :)

[@DrewElia]

Loved this video, that new remote looks great and those wide trucks are awesome!!

[@KAMiJUINs]

Thank you bro :) Yeah, those two were the biggest attractions of this board~

[@DrewElia]

@@KAMiJUINs very fun looking ride!!

[@guillaume.quignon-Esk8Bricks]

I like the style of your reviews : it is unique ! Many improvements for this 3rd version but... true question is : does the black carve 3 Carves as well as the other ones ? ;-)

[@KAMiJUINs]

All the boards that come out these days are good at carving. However, the focus is on how stable it is, how flexible and smooth it is, and how easy it is to control it, and Carve3 felt that it was perform all of them well And Thank you for watching :)

[@ONSRA]

Well there's many different washer options for different carving abilities. We'll film a video about this

[@guillaume.quignon-Esk8Bricks]

@@ONSRA Thank you for the reply : as a DKP user, i am very enthousiast to see alternatives options such as these TKP trucks. And if they can carve well with High speed stability, it could be the best option for future ;-)

[@guillaume.quignon-Esk8Bricks]

@@KAMiJUINs As usual : a plesaure to watch and... to hear ;-) there is a kind of serenity in your videos that gives that feeling.

[@S62Uce]

Kami back with the heat 🔥

[@KAMiJUINs]

Thank you~But I didn't go anywhere HAHA :)

[@esk8unity]

yessir!!!! cant wait to hop on mine!! ❤️ great stuff brother!

[@KAMiJUINs]

Thank you for coming Brother~ :) I guess, you will like it!

[@l3rlc]

KAMi what are your thoughts on the use of a stiff, non flexible, enclosure on a flexible deck? I know some people have had issues on older models where over time the enclosure will dig into the deck creating a gap which, among other issues, could allow water to enter and destroy the electronics. It was the first thing I noticed when the BC3 was announced and I was kind of amazed that such an obvious issue was not addressed... That and the smaller battery size are my biggest reservations when it comes to this board. It was nice to see that you got a decent range though so that clears up some worry. I really wish Onsra and other companies like Backfire that are making these really nice remotes would make them available to the DIY community. Thanks for another great video!!

[@chrixx9914]

It is the same deck and enclosure setup like on the Black Carve 2. I think there are some people with over 10000 km on the board and there are no issues so far. In the end ever deck can have issues (carbon can crack over time as well)

[@chrixx9914]

I was actually really surprised that the BC3 got that range with the 15psi, aggressive riding and rather cold weather. It was still better than the hurricane with a bigger battery configuration and better condition which was very nice to see.

[@KAMiJUINs]

Thank you for your comment and watching :)

[@LIVITLUVIT]

Exactly ...onsra makes 1,500-2,000$ boards and has small batteries?? I don't understand it at all...I have a black carve and ended up drilling holes into the deck and installed lock washes with bolts and nuts to make it waterproof because the bottom encloser screws were rustibg and falling out letting a gap open up...I'll never buy another onsra board that's for sure ...u can get a much better board for way less $$ ... tynee explorer, ownboard zues pro, eavon gts, b-one titan ...those all have bigger batteries, more power, bigger ah wh batteries and are less $$ then onsras best boards even on sale...I like to check in once in a while to look at onsras but their stats always disappoint ...its like they r always a year behind other esk8s

[@da420burna]

Finally someone reviewed it 🎉🎉🎉🎉🎉🎉🎉🎉

[@KAMiJUINs]

Yeah, Hope you enjoying~ :) Thanks

[@davidcai3600]

why have you never tested Hoyt Dadbod or Tabor? They never reached out to you?

[@KAMiJUINs]

Yeah ㅜ..ㅜ

[@atarkovbot123]

what material are the all terrain wheels made from?

[@robertgodette4678]

Been waiting for this.

[@KAMiJUINs]

Thank you for waiting and watching :)

[@akalia_07]

Instead of going with generic boring Hobbywing remote that we've all seen so far, Onsra went all out on designing new remote that's based on Flipsky VX2 Pro design which I do like and which I do prefer the most. Every boards should have at least 14" and up CNC precision TKP as standard, not narrow ones like on 10" one on certain boards which makes entire board look yucky with Pneumatic wheels. 12S 3P however.. I feel like battery configuration could've been better in my opinion but overall, this is a nice step up from Onsra. To those who may be disappointed in the top speed, if they have smaller pulleys with PU wheels, top speed is achievable.

[@chrixx9914]

I completely agree with you but it seems like even though the battery configuration is smaller than on the hurricane the BC3 still got more range which kinda surprised me

[@KAMiJUINs]

In my opinion, everything from the gear ratio to motor power to tire resistance is something that can affect. Just a little more battery capacity doesn't guarantee a longer range.

[@KAMiJUINs]

Thank you for the comments and watching~

[@ONSRA]

It's also relatively easy to change to bigger tires. We'll launch 200mm tire and 55T pulleys for those who want more top speed.

[@jonassvensson1819]

Hello, very nice video! However I do not like painted wood and the enclosure will probably get scratched easily. Thanks

[@KAMiJUINs]

Thank you for watching and for your opinion.

[@궯썖뚫핥]

요즘 tkp, rkp 등 다양한 트럭이 나오니까 좋습니다!! 부싱셋팅 변경은 신세계네요!! 리뷰 잘봤습니다

[@KAMiJUINs]

넵~ 시청감사합니다 :) DIY 이쁘게 마무리 잘 하셔요~ㅎㅎ

[@ryanschulz9893]

How many amps is that Orion esc running at?

[@KAMiJUINs]

I don't know exactly how much is the max current. I think I'll have to check it out by doing a FULL THROTTLE in the remote information window

[@acarrillo0024]

Do you think the Onsra TPK trucks would fit the Zeus Pro? Angle of the pivot cup base looks like a tight fit.

[@KAMiJUINs]

well... i'm not sure about that. Ask Onsra, they'll have the information.

[@da420burna]

What top speed did you get with street setup?

[@KAMiJUINs]

47km/h, 29mph Thanks~

[@Kjeyeyj]

Definitely need this for college

[@KAMiJUINs]

Yeah~ :)

[@donhos1698]

Damb, how many boards do you have now? You going to have to get a larger apartment soon. 😃 You look like you have an amazing life. Good for you man. Also South Korea looks amazing.

[@KAMiJUINs]

Thank you for saying that and watching too ~ :)

[@eddielolivares3952]

how can yo afford all these boards? Like you videos!

[@KAMiJUINs]

Thank you for watching :)

[@infinitee3991]

What's the difference between the drive and street one?

[@KAMiJUINs]

Since the wheels are large, the ride is comfortable and since it uses tires, it is possible to ride on rougher terrain. However, compared to the street type that uses small PU wheels, the truck's response is a bit duller and slower.

[@johnglover4318]

Very well made review and video as always. I think this board is a bit expensive and I think a wooden deck should have flex. A stiff board should be sleek strong carbon.

[@chrixx9914]

I have a BC2 which uses the same deck. My personal opinion is that it’s not as stiff as a carbon board but definitely not as flexible like other wooden boards. It helps with vibrations a lot but still very stable. I like it but that is obviously always personal preference.

[@KAMiJUINs]

i agree~

[@KAMiJUINs]

Thank you for watching with your opinion~ :)

[@ONSRA]

Well the idea with the BLACK Carve series was to have a board that's not as stiff as a full carbon deck and not as bouncy as a bouncy board. We think something in between is needed and a lot of customers appreciate the difference and some even got over 10'000km on the BC2. Apart from that you got a two year warranty here at onsra.

[@Why-I-Oughta]

@@ONSRA It is still overly expensive!

[@secondtolastboss8491]

Hey! What do you think is a better *_value for money_* deal out of the BC2 & BC3 based on their current prices? The BC3 is about $320 more than the BC2. Also, are the remotes for both boards waterproof? ☔️

[@KAMiJUINs]

I think I'll buy a new product. And the remote waterproofing is not in the data, so I'll have to ask

[@secondtolastboss8491]

@@KAMiJUINs Thanks!

[@joshuatheodore3261]

Would you mind checking if the trucks can be drop through mounted on the Meepo hurricane?

[@KAMiJUINs]

It is impossible because the part where the pivot cup of the truck is mounted protrudes

[@ONSRA]

The Black Carve series use the drop through design already. That said as long as the Meepo Board uses a standard Baseplate design which we think they are it will work. The trucks are available on our website.

[@karenzhang1020]

Gosh, I can never do the sharp turn, teach me. 😆

[@KAMiJUINs]

Let me know when you come to Korea~ lol :)

[@karenzhang1020]

@@KAMiJUINs Deal. 😄 I have a friend who is from Korea so that might be a good excuse too. :)

[@TheEVside]

great stuff, looks a great board.

[@KAMiJUINs]

Thank you for coming and watching, bro~ :)

[@maitredanceshow1275]

Nice review, thank you!

[@KAMiJUINs]

Thank you for watching too~ :)

[@godfriedm9991]

Honestly, not much different from the previous model in terms of the board design and performance except for the remote controller that is a head-turner indeed. I would buy the board just for it alone.😅

[@jdmannino68]

Onest opinion Kimi ultra meepo or the onsra C 3 😁 now I'm not sure witch one?? Love both of them!

[@S62Uce]

I just picked up my hurricane ultra it was $1299 absolute steal with the Black Friday deals going on rn 👍🏽

[@jdmannino68]

@@S62Uce bamboo with the gears drive or belt drive?

[@S62Uce]

@@jdmannino68 I got the new bamboo deck with the new tubeless tires meepo just released. Kept the OG drive belt set up, but very happy about traditional king pins 👍🏽

[@KAMiJUINs]

Considering the stability of the truck and the new remote control, it's the Carve3. and other than them, the Ultra was so good. This choice is difficult for me, too. In the end, the consumer's budget will be the most important factor. Thanks~

[@jdmannino68]

@@KAMiJUINs yup not a easy decision 🙂😄

[@_Zer0202]

Good review as always bro 😊👍

[@KAMiJUINs]

Thank you for coming and watching as always, Bro :)

[@Why-I-Oughta]

Acedeck Stellar review, please!

[@KAMiJUINs]

It will be~ Thanks :)

[@Why-I-Oughta]

@@KAMiJUINs Looking forward to it. 👍

[@sinjh111]

요즘은 정말 좋은보드들이 많이 나오네요

[@KAMiJUINs]

네, 매년 이맘때 항상 신제품들이 많이 출시 되는것 같아요~

[@jasonparker4965]

Is it a loud board? engine sounds much louder then many others.....

[@KAMiJUINs]

Yeah, It was slightly noisier than the other belt drives.

[@Neobees]

I Sell My BlackCarve 1 Direct Drive I repair my BlackCarve 2 belt after 11 000km Battery HS and I sell it for this Christmas But I Buy ONSRA BC3 for the Next Year :) I don't want another Brand 🇨🇭🇩🇪🛹🤗 it's My BM W Feet 🐾

[@KAMiJUINs]

Yeah, I also think Onsra has a lot of loyal customers. Thank you for watching~ :)

[@Neobees]

@@KAMiJUINs I share it .. best review

[@ONSRA]

11'000km 😳 Please send us a screenshot 😁

[@Neobees]

@@ONSRA battery HS the Total range retrograde at the end of battery life since this summer ... But I don't understand for What because this information it's on ESC not on BMS or battery 🔋

[@Neobees]

@@ONSRA and I send you a screenshot at 7100km not more because the Total today it's false and have a bug at 8888km ... The Best for this This board it's the Next Generation of Battery Graphene not lithium

[@da420burna]

Finally got to 32mph today with 40t and 120 cloudwheels 😅🎉🎉

[@KAMiJUINs]

Good job. Have a safe ride~ :)

[@francismonterona8243]

😲 Wow, how much this costs?

[@KAMiJUINs]

'ONSRA' google it~

[@AlexAlex-uj3co]

Hi, it is very good rewiev

[@KAMiJUINs]

Thank you so much~ :) as always!

[@user-pm2yq3wm9w]

Thanks. But it should be more definite. Looks like every other board is good. This does not help. Which one is better among good ones? Acedeck, Meepo, BC, Zeus, other?

[@italipino24]

26 mph top speed? This is Fabians latest offering? That's slow as hell.

[@ALTRON3]

10mm axels limits the bearing options . Not cool. 8mm is just fine for most people.

[@pixel6173]

nah trucks are bending a lot recently. 10mm is becoming the new standard. wheel's just need to catch up.

[@KAMiJUINs]

I think 8mm is still better for compatibility. But considering the durability, I think it gradually comes over to a 10mm axle

[@ONSRA]

10mm is definitely the future for electric skateboards. Especially nowadays that all boards get more speed and acceleration. Technically the axle is under a lot more pressure now. Also the truck is so much wider than the average trucks on the market.

[@MarkRockShock]

Really nice remote

[@MarkRockShock]

It seems to be louder as others, right?

[@KAMiJUINs]

yeah, It was a cool and functional remote. And the drive sound was similar to the average belt drive. Since a directional microphone is used during filming, the sound tends to be amplified and heard.

[@OddNoble]

🤘🛹👍

[@KAMiJUINs]

Thank you for watching :)

[@Steven-qm1xo]

Those motors are loud...🤔

[@KAMiJUINs]

I think so. It was a bit louder than average~

[@italipino24]

650 Wh battery is abysmal. On pneumatics the range will be laughable above 20 mph

[@ujung5683]

❤❤❤kami

[@KAMiJUINs]

Thank you for watching :)

[@2424jhg]

1800 for a board that barely gets 26?

[@esk8news328]

10:10 We have been reversing bushing cups forever, this definitely wasn't a design decision.. it's also the same bushing cups that Acedeck and others use.

[@KAMiJUINs]

You may be right, but I think no one has suggested using it like this. And that's the point. Thank you for coming and watching~

[@certifiedalchemist]

Of course it was a design decision. By claiming such they are not saying that they have invented it, but mearly that it was something specific they thought about when putting the board together.

[@esk8news328]

@@certifiedalchemist it isn't a design decision. You can do that with any cup washer since the dawn of time. We have been doing it in both skateboarding and longboarding. And designed means that they did something to make it work. No. This cup washer is OEM, not made by Onsra. It's the standard CNC cup washer you see from many brands now.

[@certifiedalchemist]

This is really getting petty, but they decided to put in a cupped washer and not a flat washer. Thus designing it that way. Peace out.

[@Mr_Atrix]

oOOoo

[@KAMiJUINs]

Thank you for watching ~