190mm/185mm Specialized EnDemo Mullet - Coil Sprung, Dual Crown, only 32.3lbs!!!!!

[@joshhaigler7716]

This bike set-up is awesome 👏. I can’t believe the relative low weight! Well done on the build.

[@Ammotive28]

Sick build mate! Just ordered my ‘23 Comp. They are heavily discounted atm & here in the UK there is a tax break for “green transport” I’m only paying £2.1k!!! And the ‘23 spec has full GX & a RS SDlux coil! I’m 5’10 but went for s3, went undersized to make it a bit more trail bikey.

[@pvflyer67]

@ 2.35 min I can't believe how fast you're going. I know these OC trails and it is sinister 👊 good riding.

[@ChupacabraOffroad]

Bro this bike is amazing! Love it and I can’t believe the weight!

[@branscombesurf]

Crazy awesome setup. Ive been seriously considering doing this, but problem is Im a taller rider and prefer 175mm cranks. That BB drop might make this a null and void dream for me.

[@mtbmike9866]

175 cranks will be a problem for sure!!! 170 cranks and perhaps get a 35mm rear width wheel will help give the tire a couple extra mm of height as well. Upping the fork will help too but 170 cranks are the ticket.

[@asquare9316]

Awesome bike. Manitou Dorado Pro fork for me though (in my dreams). Hope you have many years of fun with it.

[@radityaandika3752]

What happens if using the dual crown fork with 200mm travel and cascade linkage with 170mm travel is the frame can handle it? I have Sworks enduro but I'm still using 170mm fox 38 and stock float x2 vvc setup 😅

[@calinfloyd]

How did you run the straight Steerer with the tapered head tube? Different race cups I'm guessing?

[@2025.yamaha.R1]

Can taking off the spacers on the rear shock work with 29” wheels too to give it longer shock stroke from 60mm to 65mm

[@mtbmike9866]

Absolutely, did this for over a year on full 29er. However make sure you have 180-185mm clearance between tire and saddle. If you are on an S1 and lower your saddle all the way down and back it could touch the tire

[@2025.yamaha.R1]

@@mtbmike9866 I have a s3 frame but have my saddle really low when ever descending or doing jumps almost slammed to the frame you think I will encounter problems if I take off those spacers?

[@mtbmike9866]

@@2025.yamaha.R1 just grab a ruler and measure. Every saddle and dropper and how you position your saddle can vary. As long as you have at least 190mm you are good.

[@tangosix4736]

How did you setup the steerer tubes? What race cups did you use?

[@DjMTB76]

Nice bike! I am planning to buy wrp link for my norco. You just ordered from their website? Thanks

[@user-xq5rp9fm1p]

Looks super badass, but that is sooo much bike...

[@mtbmike9866]

Funny thing is on one of the local flow trails, I’m a bit faster on this bike than a shorter travel trail bike. But this bike sees 12-20 park days a year and lots of gnarly local trails

[@carloslam3127]

Hello bro! Can I run a rockshox boxxer 200mm 27.5 on a enduro sworks 2021?

[@mtbmike9866]

You can if you have a mullet link out back

[@vincentbillard6895]

I did this on my enduro with 180mm dual crown and my head tube cracked. How often do you ride this bike? Have you had any similar issues?

[@mtbmike9866]

I’ve notice Head tubes crack mostly on 21 Enduros running regular forks. Mine is an earlier model and was solid after 12+ bike park days on this setup and about 9-10 months of use before eventually selling the bike

[@wildnight]

What time you rode the Stair steps i have never seen so many biker over there.

[@mtbmike9866]

Ran into a large group of riders hiking up (many XC riders) Saturday morning, around 8:30

[@chujuy1]

Great video and sweet bike.

[@nicolasmazzoleni9436]

Interesting setup :) Would you a think a DH 200mm dual crown fork would fit for the frame ? Thanks 👍🏼

[@mtbmike9866]

It fits, I know someone running a Fox 40 at 203mm. 62.5deg HT so not great for most trails. Good for park riding mostly. Stick with a full 29er setup though. Mullet really hurts the climbing

[@johngenesistaer8525]

How did you fit your boxxer steerer tube since it's not tapered

[@mtbmike9866]

2 options. Get a bottom headset for around $30-40 or get a crown race designed for a tapered headtube ($15). I chose to get the crown race so I can quickly swap between forks as needed.

[@sebastiangallo9865]

what size crown race is it, trying to do the same conversion and no shop knows

[@Myke_Juliet]

Mike, how has/had the Endemo held up?

[@mtbmike9866]

I got rid of the bike a while ago. I’m into Ebikes now. Pedalling sucks

[@lennartkinzler]

How can you mode a boxxer to havr 180 mm and can i run my enduro 27,5 front and rear with out the triangle mod thing and how much travel does it have with the 205x65mm when the original is 165mm

[@mtbmike9866]

A 180/190/200mm air spring for the Boxxer is $43. If you run full 27.5, run the Boxxer at 200mm. The rear shock is 170mm stock. Your closer to 182-185 in the back

[@lennartkinzler]

@@mtbmike9866 ok thanks

[@lennartkinzler]

Why is only 32.3 lbs in the title

[@mtbmike9866]

@@lennartkinzler that’s what the bike weighs without pedals. Boxxer weighs just 100-150g more than a Fox38

[@lennartkinzler]

Can i then ride the 205x65 shock without the mod thing or do i need it

[@2025.yamaha.R1]

Does it void warranty?

[@mtbmike9866]

Of course!!!

[@lovebrosracing2559]

That bike turned out super sick! Do you know what stroke length your shock is currently at. I have a specialized enduro too and the current shock is 205 x 60mm and was wondering if a bigger stoke like a 205 x 65 would work on the bike.

[@mtbmike9866]

205x65 stroke

[@spencerimre]

Longer shock only works if you have the mullet link. Otherwise you can have clearance issues at bottom out

[@harry0296]

At that point just buy a demo and put a 12x1 on it

[@mortenbarth746]

Bye bye seat tube angle and carbon frame an frame storage

[@barrettwhitaker2740]

Do you have an Instagram? I have a couple questions installing downhill forks on my s works please 🙏🏻