1915 with 40 IDF Webers and Englw W110 cam

[@BigTimeSuperFriends]

I'm thinking of building the same set up. Any idea what the HP you're getting from that?

[@georgetsichlis]

Depending on compression ratio, usually 90-110hp. Which is a really nice sporty setup, with good mpg if tuned correctly.

[@smokepeddler]

Solid daily set up.

[@TheStevemcqueen68]

It needs next size up exhaust and J pipes . so it can breath better.

[@vayabroder729]

And valve sizes

[@rubber-duck]

Idea engine build, putting out 80-120 HP great engine for a Bug, fun to drive 😊

[@RevItUp01]

Hi, May I have your permission to use your latest clip in a compilation? Thanks!

[@stabu47]

nice!!!

[@nitroboy2]

Idf carbs jetting ?

[@boatlover2296]

Very cool

[@joaoaparecidodossantossant2289]

Ficou top a máquina , chik o motor , gostei que eu vi um esticador de correia

[@ruubguus4321]

💯👍

[@saylormalan]

I'm amazed at the amount of money people spend to tune up an engine that's designed to deliver something like 50hp that's not going to handle the power that this high-displacement kit is going to produce. If I'm wrong please correct me.

[@synapticburn]

you're wrong. you can double the hp and suffer no decrease in reliability. People have been modifying these engines for half a century, it's real obvious by now what works and what doesnt etc

[@Rob87659]

Don’t want to sound like a know if all but that’s a 4 cylinder 356 or beetle engine not from 1915 maybe around 1955-65

[@Rob87659]

Definitely an early engine cause it have the 2 bolt round port not the rectangle port

[@kasuraga]

1915 is the displacement. It's also has dual port heads which are later heads (71 and up).

[@tedsmith6137]

No worries about sounding like a 'know it all' You certainly don't.

[@alexclement7221]

1,915 cc displacement, you dope!

[@martinharris5017]

Straight cut cam gear?

[@vayabroder729]

Doesn’t sound like it; you would hear the whine of a straight cut gear.

[@martinharris5017]

@@vayabroder729 A sound I'm familiar with as i have one in my bug :)

[@vayabroder729]

@@martinharris5017 Good for you; why couldn’t you tell the difference?

[@martinharris5017]

@@vayabroder729 I can hear a whine there when the motor is revved and was uncertain of whether it was the serpentine belt drive or the cam drive, so I asked if it had a straight cut gear. Does that clarify to your satisfaction?