1930 Model A FULL DISASSEMBLY!! FROM DRIVER TO RUINED!

[@Sleeperdude]

YOU RUINED IT!! just kidding it looks great

[@PuddinsFabShop]

Sure are a lot of salty folks in these comments though! 😂😂😂

[@Sleeperdude]

@@PuddinsFabShop just build it the way you want it.don’t worry about them you can’t please everyone

[@PuddinsFabShop]

That’s a fact. 👊🏻

[@MortskeRepair]

I'm just here for the comments.

[@PuddinsFabShop]

Mortske you got a good blower motor for this thing???

[@brucebeaver6929]

One of my favorite things about Puddin's channel, (and Mortske for that matter), is that they admit and show their mistakes and do not edit them out and act like they don't make bad mistakes. It makes for relatable channel content. Real is the deal. Puddin is real.

[@NOD1776]

Bro this build is going to be the next yeehawl for this channel! Can’t wait to see every second of this.

[@GaryClow-g2v]

Totally agree I think he's more talented than he realises👍

[@hubcityhotrod]

The "Someday model A" turns into the "Today model A". Great show tonight glad it ran a little late, allowed me to get my new T-shirt and sticker order in. Can't wait to see the progress on that "Is that from the 80's" street rod.

[@delavarzarnegar8170]

@Jason1975ism wah wah who cares. They sold so many of these damn cars and there's millions rotting in fields. If you want to restore one there's plenty.

[@Jason1975ism]

@@delavarzarnegar8170 i deleted my comment and I apologize for what happened with your mom. She wouldn't take no for an answer.

[@reallyoldtom9352]

Puddin' , Thanks from an old man who will never get the chance to build his own Model A hotrod. It's good for me right now to have your videos to look forward to. I really needed this. I only wish I was there to help you. God bless and work safe. Tom in Idaho

[@danielkingery2894]

Hell yeah Tom...I hope you see some stuff you might have done on your own rig.😊

[@juniorglasgow9542]

Hello from a fellow N. Idahoan.

[@VanderSysDavid]

That thing's looking real good so far! An old, old trick for putting a V8 in a pre-V8 ford is to take the firewall out and put it back in backwards.

[@someguy2998]

Looks like ole Puddin joined the "Quarter-Million Club" CONGRATS!!!

[@MortskeRepair]

No, he didn't quite pay that much for it.

[@someguy2998]

@@MortskeRepair 🤣🤣🤣

[@grooveguy]

​@@MortskeRepairMortske you sir are hilarious!!!! 👍💯😎🇨🇦♥️🇺🇸

[@joshuataylor4256]

That’s awesome! Thanks for pointing it out. Proud of ol’ Puddin Tang

[@jimmyjam813]

Puddin's channell changed my life, I'm a older car guy that stopped working on cars. I started off buying some new air tools, I watched what main tools Puddin uses. My first project is a HHR. I just finished it and it's better than a brand new car. It was alot of fun and I feel good about it. Thanks Puddin for getting my ass off the couch ! Please print some " Momma didnt raise no Punk short sleeve :)

[@timothydewolf2980]

Yo Puddin- I own a 1931 Model A. Henry Ford made millions of them and there’s still millions on the road. Keep on keepin on!!!!

[@mikeobrien6954]

Just a little comment, on my previous model a builds I would cut the rear fender well and add a strip to kind of forming a mini tub. Otherwise when setting up the car in a lowered position the tires will rub on the backside. Check out the firewalls from Direct Sheetmetal it will give you a starting point for what you need, weather you make the modifications or purchase one. Keep the videos coming

[@sweettee3647]

Whatever you don't use is easy to sell. Especially in good condition. Beats stuff sitting around. Love the build

[@twinkie27271]

Will probably get his money back, or more on the rolling chassis, engine, and transmission.

[@Mikeys_Rydes]

Wow! That was fast Puddin! Nice thing is that you won’t get burned out before finishing it! Station wagon took a toll on you! Good job!

[@zeeelander]

The classic car Authorities are on the way Sir... Just you wait Puddin.

[@Surferkeldain]

Slick is a best friend ever! Man this thing looks great already!!

[@andymeyer8635]

Puddin next time you’re at the harbor freight get yourself the $25 air powered band file, handy as can be for grinding the heads off old screws and such. I find a new use for it every time I do a project.

[@jolson88]

I quite literally LOL'd at the "You okay down there?!?". Had to rewind and watch the tumble again XD.

[@drewanderson8279]

I watch every video on here. I fully support you puddin. But this video just brought me back to how I used to feel. Finally back to building projects. I watched this fully from the beginning to the end. This is the Content I remember and absolutely love! So happy your finally in the new shop and back at the projects!! Looks great buddy. I'm very pleased with a 2 hour video!

[@jimrky6062]

Nails were on door cards through the mid '60s LOL! Nice Model A, great frame. I was impressed by the deal you gave to the owner of the Someday Model A.

[@jasondunlap9713]

I took my family to Taco Boy Saturday! It was great food and very friendly owner. We ate from Kansas City passing through 🌮

[@unionjack2819]

Hey Puddin', I bought a fairly good '32 5 window Coupe. When I started getting in to it the wiring, suspension, brakes, engine and everything else had been thrown together. Hot Rod was the only way to go. It took about fourteen years off and on but now she's all done we are having fun. I had guys telling me I ruined a good car but we don't worry about them. Me and my family are enjoying driving the hell out of it. All the best from England.

[@lolife999]

Old hot rod trick to recess the firewall is to use a metal wheelbarrow tub to gain clearance for the heads and distributor. Cool project for sure.

[@irav4u]

and I've got one in NC he could have but it would cost a lot to get it to OK. Tears me up it's just sitting there going to waste

[@RIPSRIDES57]

I came here to post same thing I have a couple buddy's working in custom shops that have done same thing.

[@erichoffman2479]

Another way is to delete the firewall tank and flip the sheet metal around to gain the needed room for a sbc

[@jeffmiller6100]

Finally got that chassis airplane off the rafterz ! Looking great ❤❤

[@bonescommiecrusher6473]

@Puddins fab shop,,,I watched some older videos of Edna today,,,,I can THAT YOU have suffered through a lot of stress,,since back then...You have done well,,,KEEP YOUR FAMILY CLOSE,,,They need you as much or more than you may think,,,God be with you..THANK YOU FOR THE SHOWS...👍👍👍

[@marionarthur6629]

That's y I love it channel u dont care what everyone else thinks it's urs and ur gonna do what u want to do unless u know ur gonna sell it or give it away and that's how it should be and I support u all the way

[@michaellambert1190]

Whoever hates on you for this build can kick rocks. Your pur excitement is contagious. Can't wait to see the finished product

[@girardmatwijkow9304]

I think giving the someday model A back the guy you bought it from was really awesome. It’s a win win. He gets his beloved car back and you get to build your project with an amazingly nice platform! Good on you Puddin!

[@RaymondCoggins-xd2re]

I kringed when you started cutting on that beauty but it's gonna be awesome looking forward to seeing you finish this one

[@JimmyMakingitwork]

If you want a 283 with side mounts they are cast in after 1958 until they stopped production in 1967. But I'd go with any small block I could find and add the script valve covers for the "look."

[@Sourman1545]

I bet Mortski is drooling at all those model A parts that Puddin's not going to use

[@ianhufnagle5605]

Man I really wish you would run them shirts again!!! I missed them and when I got back for fire school they was sold out!

[@fredcarlson5775]

Puddin your and slicks progress is amazing it's just going so well and I envy you because I will never get to do a project like this

[@joedreblow5236]

As a wish-I-was…, I am loving this build! Can’t wait to see the finished product!!

[@conordawson8453]

Puddin, I'm extremely disappointed in you, you're taking apart a perfectly good model A to make a badass hotrod and you don't even have the decency to see if it'll maybe do a burnout first??? What is the world coming to!

[@ronbrown3552]

Hey Puddin, you may be shaking with excitement with where you are on this hotrod build. US VIEWERS ARE SHAKIN' ALONG WITH YA!!!

[@robertjean659]

Many other KZbinrs probably would have cut the transmission learning curve out. That’s why you’re my favourite KZbinr. 🇦🇺🇦🇺👍👍

[@bladesofglorylawnmaintenan6354]

“Tubbed out for a rear buggy spring” !! I freakin LOVE IT !! 😂😂😂

[@wolfparty4234]

Love it brother!! Just think, if it wasn’t for Hott rods back in the 80’s and 90’s we wouldn’t have had ZZ-Top and them Hott Girls…!😂 You know all the Haters loved watching all of those ZZ-Top music videos…! 💦

[@tjgarland8101]

call her the Easy A

[@dshoaff]

I'm loving this build! Hoping you decide to make it red.

[@ralphbalde5224]

I’m gonna get my wife to subscribe to Puddin’s Fab Shop to offset 1 of the whiny crybabies that unsubscribed because he’s building his model A the way he wants

[@PuddinsFabShop]

😂👊🏻👊🏻

[@justingould7348]

Other than the engine choice I absolutely love it. I’d of like to see a flathead or hemi in it but that’s just me.

[@BillyBob38846]

Good job Puddin, it's starting to look great man. Your compressor kicking on really doesn't mess up the sound as bad as you think I could still hear you fine with it running. Can't wait to see what all you get done next. 👍

[@Anthonyowens1230Owens-eo8fq]

Don't be nervous brother. It's looking great. Send the Ole girl the way you want... she'll ride. I believe it.

[@scottbrady5127]

You will drive and enjoy it the way you are going with the car and it would just sit the way it was originally. I look forward to seeing the build and the smiles it puts on your face as it goes along.

[@michaelsiegmund1789]

Was getting a bit sick at my stomach looking at all the cutting of the body but the further you cut and the more you found it's a good thing you did what you did. Now I can't wait to see what comes from the puddin mind and the final look.

[@Bjyrgen666]

I'm very happy you're getting to build this dream car of yours, and very excited to see it get built! But i'm STILL even more excited 'bout the odd ball stuff like that turbo swap for the yee hawl!! Hope you see that as a good thing, anyways the best cars are always whatever ones you end up working on!

[@toddsmith4015]

Puddins feelin better.... yay.... time to bring the energy we all appreciate!!

[@franksgarage8551]

Starting with a clean car. Not a bad plan. Im sticking with fixing old junk and making drivers. Mind you up here in Manitoba the pickins are mighty slim.

[@perotekku]

Hey, a fellow Manitoban. Yeah, anything that mint up here would probably be double the price.

[@shaggydane7197]

Getter Duuuun... Btw.. Rat Bod turned the fire wall around.. Might be getting in the paint job by doing that.

[@Tealmoney8571]

Seeing the model A on the frame with the white walls gives it a whole different look! I think it would look killer with the fenders, too! I can't wait to see the finished car. I really like the color too.

[@The_Kman]

You and Slick Fifdy really really kicked butt!👍

[@mtrgv]

A new build of EPIC, groundbreaking, revolutionary, bench marking, set the benchmark high, absolutely mind-blowing consistency, Wow!!!!!!!!!!!!!!!!!!!!

[@spencerrobinson2719]

WOW! This is so cool! There is no question that you are way ahead by starting with a solid, clean car, saving money and time.

[@christophereakin]

Weld a piece of flat metal to the cut off ends of the crossmember and make it long enough to hang down below, then figure out where that cut off piece needs to go and weld it to the flat piece that hangs down, and add gussets between the flat pieces and tubing. That is what I had expected you to do, but maybe there are reasons that wouldn't work?

[@howardkoster4026]

Ruined???? ROAD APPLES !!!!!! It's not ruined 3:07 if YOU build it Puddin'. You can take that to the bank!!

[@dwayneford9028]

It's looking good 👍 I know the swap meet u was talking about if slick 50 Set up out there take some of your shirts and stickers out there. May do pretty good. Out there

[@Truckman1980]

Looking sweet! I do think it would look great with fenders though

[@tis1980]

My dream ride right there. Except my dream has a flathead v8. But love an unchopped sedan.

[@ryanbrockmiller1648]

add some lake headers and it would be perfect just like that. just beautiful.

[@ChrisDunnMaine_420]

Pudding I do believe this is going to be one of your best works that you probably have put together on this channel good luck and I cannot wait to see this build fulfilled through the end good luck and best of wishes Chris from Maine

[@user-427.commodore]

Oh forget the travelall he build the from a body an every thing else under it?

[@dougwilson3148]

The model A is off to a fantastic start!! Can't wait to see the next episode!!!!

[@gasmasklarry9709]

Model A hot rod equals happiness! Well done, now is always a good time to build what you have always wanted And... Number 77 really, really wants to take up residence on the stock Model A leftovers... It told me

[@cmleoj]

I’m impressed. You’re a magician with the cut off grinder. 😊

[@grantlynch1666]

hey puddin love your show i am into bikes but i do love all sorts of cars and what people like yourself are doing .looking forward to watching you transform it into a cool hot rod..grant from Australia

[@ogediaz]

Great video. Felicidades to Slick with the baby.

[@MikeMac90]

As much as I love older cars in factory form, I do really appreciate modified builds as well and this looks awesome! Great job. Can't wait to see the finished product.

[@oleredcustoms]

It's looking awesome!! Going with the better car was definitely the right move. It looks killer sitting on those wheels with no fenders, but I know that's not the look you're going for, so I'll enjoy it while I can.

[@marcvought]

Love it! If people wanted it to be the way you bought it, they should have bought it themselves. Keep on making it awesome!

[@tkskagen]

I am so glad that you are able to ask Derek for assistance with this. He is a genuine feller!

[@The1crazycaper]

I think it's going to be awesome. The only thing I can see as a problem is the top needs to be chopped. Keep up the great work.

[@xxkillerkane420xx8]

That car looks sick and it’s not even close to done. I build 1/25 scale models and have built lots of model a’s but this has got me wanting to do a full fender build which I’ve never done before. I’m gonna do a custom one for practice and once you’re done with the easy way model a, I’m gonna build a replica of it!

[@Dan-gi7yz]

Anybody that has ridden in an old car. Will appreciate the modernized version ))

[@RustBeatersDerelicts]

Congrats on hitting 250k subscribers! IIRC, one of those levers on the steering wheel was for the manual spark advance. Food for thought, most of the famous T-bucket's (Mr Norm's, etc) were all built on Model A frames.

[@Ron_Masterjohn]

I’m going to love watching this build and looks like every else is too. 😊

[@Mr49Studebaker]

I'm very glad you are starting on this car and you definitely deserve the nice car you've been dreaming of.

[@Chevykev76]

The model A is looking good! Nice shout out to Mortske and his starters .

[@stahlke775]

Totally love this build!!!!! I have a 29 two door. Just love everything you are doing!

[@bones_duece5286]

I have watched many a Puddin video... This one makes me feel feels. Having heard you say this is a forever car, please do everything you want and allow Slick to body work where he wants/you need. I say allow because you know he is capable and willing. I think this is the build that Pudding makes/makes Pudding. Do not fret about "purists", hot-rodding was never meant for the faint of heart. Hot-rodding was intended for individuals, you cant make mistakes in purpose of your wants. I am so very excited to see this happen. Good on you for the courage and ability. Keep on with your dreams.

[@bones_duece5286]

@-PuddinsFabShop electrical I'm your man. As I'm sure many of us here can assist, I know my way around a meter.

[@scottmorton5379]

Puddin is a great example of what’s great about America. We do what we want( mostly) live how we want, and take an old classic model A and fab it into something way cooler. It’s just a damned old car folks!!!!

[@brianchambers8885]

Holy crap, that picture of Slick in the newspaper looks like the villain from an old Dudley Do Right cartoon. And the car is cool. Looking forward to this build.

[@michaelgoodwin6328]

Wow!! That car is looking awesome. Plus you can still throw candy at the parade.

[@meredithblodgett9157]

It's looks great. I can't wait to watch some more on this project. Remember just ignore those comments. Just stick with those positives comments. Just be you Jacob!

[@horiboss2932]

I heard you were shaking on the last hotrod build, and she turned out beautifull

[@stanleymartin1613]

Cool stuff! Hopefully you keep the fenders on it! Great video. Enjoyed watching ✌️ 😎

[@QuantumTime-pc9ts]

I am so happy you decided to return to the original plan and restore the chassis back to its beautiful original glory - the chassis is really well made. By doing that you restored my faith in Pott County Common Sense! I would have gone with a four speed myself.

[@nicolasstanley1392]

This is soooo awesome. Brings me back to the inception of the channel but with full Puddin’ flava flav.

[@larryd.214]

Thanks for another good one Puddin! The A is looking great!

[@matthewschneider2089]

Dude!!! Great video!!! Always wanted to do that exact same thing to a restored model A!!! That was a big time saver!!!✌️

[@seancmadison]

Was watching the second channel trailblazer transmission video and noticed you don't have anywhere for tail lights to mount on the model A. That made me wonder what style hot rod tail lights you are going to go with. Going to French or just hang off a bracket?

[@A.L.Thompson]

That's going to be a cool ride. I like the stock looking wrapper with with hotrod heart.

[@coffeefail5014]

I'm so excited to see this build start! Even if it isn't going to be what I thought it was going to be eventually, you do you Puddin and don't let anyone stop ya! God Bless

[@quadsquadracingable]

Damn it Puddin, how fid you get so cool! Lol! If that puddin shirt gets here within 9 days I'll get a picture of it on the beach in Mexico!!

[@chesterrush5570]

Pudding I'm not a Ford guy but watching you take that car apart and cut it up make me a little sick but you are the right guy to do that cuz I know when that car is done it's going to be badass and you will finish it unlike sir mortar kiss I came over from his channel few years back when you guys did the live feed I'm glad that slick helping you that's in his wheelhouse I wish he had a KZbin channel but love the content keep it up

[@salvatorebaleno9807]

This is the most excited I've been for a youtube project in a very long time.

[@Rastapirate1]

I was completely enthralled watching this episode seeing parts of a car I may never get to see from the aspect of the way I would like and boy howdy do I likey. And with slick there you got a fantastic sidekick for this project. Major kudos guys that rod looks good! And I agree it would probably taken you months to get close to this far along and if she could talk she would probably be overjoyed becoming a hotrod that will be driven and enjoyed much more than in stock form and for the purists this just raised the value of yalls original Model Ts by making those death traps just a touch more rare

[@waynespears5664]

WooHoo that rod is going to look GREAT,KEEP That video stream coming Puddin,HOT ROD BUILD IN PROGRESS..........................Fort Worth,Tx

[@Crash-549-vh1]

Awesome work going to look good can’t wait to see the finished hot rod pretty cool

[@olymono2625]

I heard that the original shipping crate for the motor or transmission was made a specific size so that they could be used as floor boards later on in the build.

[@JDLarge]

So looking forward to seeing this come together! Also maybe a new pocket T perhaps with that beauty on it using Slicks vision (drivers side) and some text under it reading “You “Roont” or “Rooned” it!” Man the possibilities lol… Keep’em coming brother, I’ve shared the heck out of this vid with my old school friends and they’re as pumped as I am! Let’s see if we can’t drum up a little more attention to her, she’s worth it! 😉✌🏼

[@user-427.commodore]

As soon as you cut that frame, i knew you'd have to weld it back.. Lol, do it twice is nice..

[@greavesy3998]

The moment 10:29 reminded me of VGG. Great vid as always mate!