#195

tyneeboard.com/collections/ty...
Tynee boards Discount Code: KAMI
Music by Soyb - Layali
INSTA - / kamijuins
E-mail - [e-mail]

[@KAMiJUINs]

The Stinger was a board with features that made it really fun to enjoy in the city like the Meepo Flow. Both boards were satisfactory, but if you have more room on a budget and want more power and a longer range, the Stinger might be a good choice too. 스팅어도 미포 플로우와 마찬가지로 도심에서 정말 재미있게 즐길수 있는 특징들을 갖은 보드였습니다. 두 보드 모두 만족스러웠지만 예산에 여유가 있어서 더 강한파워와 긴 레인지를 원한다면 스팅어가 좋은 선택일수 있습니다.

[@valkalyuta2704]

Hey I really appreciate your videos. I learn so much. what do you think I should get the mini 3 pro or the stinger?

[@jasonmims7236]

@@valkalyuta2704what did u end up getting? I just ordered the mini tynee pro

[@rafaelvega59]

I love this board. Really glad I chose it over anything. The cloud wheels make it so comfortable to ride

[@KAMiJUINs]

:) Thank you for Watching ~

[@scstudios8]

This board with the air tires has to be perfect. I got the mini 3 pro and did the air tire conversion and its just an amazing board all around. I did move my rear trucks forward to keep my kicktail working. I wish this board was available when I got the mini 3 because it looks like more of what I was going for which was a kicktail, big battery, smallish board. I may get the deck and swap mine.

[@KAMiJUINs]

Wow~ I want to see your mini 3 :)

[@ChiefMoteef]

@@KAMiJUINs ⏯️

[@wiembellil3453]

Nice vidéo 🎉 the picture of the board with the all-terrain wheels is mine haha. with this option you absolutely need tkp trucks to avoid the wheelbit. With at wheels when you use kicktail the bash guard doesn’t touch. the board is then completely different with tkp trucks. I like it a lot, for me it is by far the best kicktail board on the market. I have a stella mini and I had a challenger, a stella s1, and I also tested the tynee mini. The stinger is top 1 and acedeck mini top 2

[@KAMiJUINs]

Oh! really? Sorry for using it without asking. I thought it was a photo revealed by the company. Thank you for watching too ~:)

[@wiembellil3453]

@@KAMiJUINs dont worry ahah the board is mine not the photo that they sended before shipping

[@crabcrackcrap5694]

would you tell me the belt size for the at wheel pulley?

[@Rastex42]

how is the challenger compared to the stinger?

[@wiembellil3453]

@@crabcrackcrap5694 330-5m

[@vincerice2031]

I absolutely love my stinger. Swapped it to a loaded omakase deck, omni tkp trucks, meepo cyclone 105 wheels.

[@KAMiJUINs]

??? Didn't you change it too much already? lol~

[@knoopx]

so amazing you replaced most of it? xD

[@vincerice2031]

@@KAMiJUINs lol I changed everything except the electronics, but that was my plan from the start to use it as a donor board. It came out fantastic.

[@BrOwNiE0307]

What’s ur insta I wanna see ur build !!!

[@remyslosse1392]

Hi Vince, Remy here. I’m hesitating between buying an Evolve Onirique (basically a Omakase deck) or buying a Tynee Stinger LE and a Omakase deck, which would be a much cheaper option but a less refined product than the Onirique. Plus some DIY parts… I,m curious to have some informations about the easiness of the deck swapping. Did the battery enclosure fit nicely under the Omakase? Are you happy of the result?

[@lucashassan7444]

Really good video man, It was just what I was looking for. Thank you!

[@KAMiJUINs]

Thank you for watching too~ :)

[@MichaelBrashier]

I put the Waterborn surf adaptor on the Stinger and it’s amazing. The rear bracket won’t fit because of the battery case and you need the extender on the front for the same reason. The carves are insanely good. Makes me feel like I’m surfing perfect waves.

[@KAMiJUINs]

Thanks for the information, I would like to try it if I get a chance.~

[@almost-punk]

stinger is such an amazing board. unlimited fun, i would recommend to anybody!

[@KAMiJUINs]

Thank you for watching :)

[@almost-punk]

@KAMiJUINs love your videos! your style is very informative and relaxing. I especially appreciate that you take them apart to show the insides- after seeing your video i'm going to take apart my stinger to put a tracker tag inside the enclosure :)

[@projectmayhem2330]

Love you reviews! What is your favourite board you have ever ridden ?

[@Mor7077]

finally a video review without that guy who always comments like this "🤙👀" 🤷🏾‍♂️💀😂

[@KAMiJUINs]

Thank you for watching :)

[@ChiefMoteef]

🤣

[@willmc6728]

nice board, nicer music, nicest dog

[@KAMiJUINs]

Thank you so much~ :)

[@davidlazarovich]

Great video and great board. This is just BEGGING for a deck swap with a mini-longboard commuter deck. I have an Arbor Zeppelin Flagship and I've been waiting for a company to release a board with an enclosure that would fit and this absolutely will. Swap out for TKP trucks (that I can hopefully drop-through) and I'll finally have my mini-longboard super commuter 😍 Edit: If you have any 33" mini-longboards laying around, maybe you can make a DIY video out of it and try it out 😏

[@KAMiJUINs]

Thank you for watching and your opinion~ :)

[@norcaldave]

Yo kami Do you tighten those dkp trucks before your top speed run? Also enjoyed that music alot...think I'll play it back in my truck system Thnx 4 review

[@KAMiJUINs]

When I review most boards, I keep the factory-shipped settings. Thank you for watching :)

[@user-sn9od2cy4v]

Very curious about those AT wheels, I'm wondering if it's possible to take regular HOTA AT wheels and put on stinger, that would be a nice video

[@KAMiJUINs]

Maybe someone's already working on a video like that~

[@gemini9775]

very nice and complete rewiew 😀

[@KAMiJUINs]

Thanks :)

[@eBoard3R]

⚡🤙🏼🤙🏼⚡ *My dream finally came true!* Stinger & Flow in a Kami Juin video!! 🤩🤩 I love the music choice! 🔥🔥 Risers are CHUNKY 😮 I knew it was thick but wow, I'd replace them 😁 3-10mm max. Wiah they used flat head screws not dome head ones, might feel them with some shoes if foam grip and shoes are soft I really like the deck shape but prefer the overall design of the Flow, if the Flow had this shape I'd be happy 😂 Ultimately there are nice differences between them so people can make a choice based on needs and preference. Super interestin differences in gearing, EAC current and motor power! I prefer power effiency, not torque so Flow is better for me. I would have picked Stinger but Flow is the right choice for me... fate/luck made a great choice for me! 😂 I love my Flow. Stinger is great for those wantin more torque and more range. Their names suit them well. Ouch about the 360 cam 😱 This was joyful to watch!! I found out many new things and it helped me figure out which is the better choice for me, I don't need to wonder anymore, thank you bro!! 🤙🏼🤙🏼

[@KAMiJUINs]

Yes, I hope it helped you a lot as much as you've been waiting for. Personally I was sorry this video didn't have more clips as the camera broke, but I'm glad you enjoyed it.~ Thank you as always, bro :)

[@Mor7077]

Bro, Who are u?👀 u are everywhere under every electric skateboard reception video 😂

[@eBoard3R]

@@Mor7077 😂😂 I'm *EVerywhere* esk8, eBike, EUC & movie content, I'm there 😎 Instagram, Ytube, TikTok...

[@NotHeresrsly]

If you can't use the kicktail without hitting the motors, how do you normally pick it up? Like, from the rear/motor cage thing? Can you hold it by the rear motor cage or truck and drag it by the front wheels?

[@KAMiJUINs]

Yeah, you can drag it with the front wheels.

[@robbieschweigert2700]

Great review I plan on buying this board over the new evolve

[@KAMiJUINs]

It's worth it in terms of price.~ :)

[@stephenhartley3292]

I do like the deck more than the flow but it does look too high, if you removed the risers would you still get wheel bite with the cloud wheels? Always better to have a lower c of g

[@KAMiJUINs]

It seems to me that there is room for a little bit of lowering.

[@interista7878]

Awesome review. Thanks! I don't get why the ride height is 20mm taller than the Meepo Flow when they have same size wheels and trucks(?) and the Stinger has wheel wells? Have you tried removing the risers to check if you get wheel bite? It should work, no?

[@KAMiJUINs]

Thank you for watching :) I don't think there will be any problem with the front truck removing the riser pad, but I think the rear will have wheel bytes.

[@robertgodette4678]

It looks so sick!😊

[@KAMiJUINs]

Thank you for watching :)

[@Cactuspractice12]

Gret video. Do you think it's possible to replace the Hobbywing ESC on this with a VESC-based one?

[@KAMiJUINs]

It's possible... but it's a bit too much to raise the output significantly due to the battery specifications.

[@Rastex42]

how is the stinger compared to the mini 3 pro in terms of power/acceleration?

[@KAMiJUINs]

I felt they were similar!

[@NAMAMI76]

Thank you, Your very Good. I Like carving like waves as i am a surfer first. I feel this board could be a good pairing to my style, what are your thoughts K

[@KAMiJUINs]

Thank you for watching :) Please also refer to my #186 video Both are fine, so choose the one that suits you

[@johnglover4318]

Hello, which one do you think is better? Sting or Flow? Do you think one can remove or lover the super thick riser pad? Thank you

[@KAMiJUINs]

The battery is a bit better in the Stinger, but in other areas, the flow seems to be better. And if you remove the riser pad, there may be interference between the motor and the deck.

[@KroniklyStoned]

My question is which board do you prefer? The Tynee Stinger or the Ultra X Pro?

[@KAMiJUINs]

the Ultra X Pro

[@ESKATEUK]

Hey, just a question, do you know if the ESC current is the same between the meepo flow and the meepo envy?

[@KAMiJUINs]

Yes, they are all the same in ESC and ESC currents, motors and battery configurations~

[@ESKATEUK]

@@KAMiJUINsokay thank you for the reply, great video!

[@ESKATEUK]

@@KAMiJUINs sorry just another question, these new small boards seem to have some crazy specs, this one uses the same 6368 motors that a Hadean uses with 80amps supplied from the ESC, that’s some serious power on paper, does it actually perform as fast as these AT boards like the Hurricane and Hadean?

[@KAMiJUINs]

Gear ratios and wheel size are also things to consider, but assuming both use the Stinger's wheels and pulleys on the Hurricane, it's likely to be similar or the Stinger will be just a tiny bit weak.

[@Mr_Atrix]

is there a big enough motor you can use to have pulleys on both sides of it...?

[@KAMiJUINs]

It's a bit hard to understand the meaning of the question, can you tell me in more detail?

[@Mr_Atrix]

@@KAMiJUINs so normally we have the 2 motors next to each other.. but I was thinking if there was just one motor long enough to do the same thing. A double ended motor for the 2 wheels if that makes more sense.

[@user-tr4fx6zk3x]

잘 만든 보드인 것 같습니다. 특히 에어타이어도 호환된다는 것이 큰 특징이네요. 근데 크루져보드에 저정도 롱레인지를 탄다면 진짜 강철다리 아니면 못탈 것 같아요 ㅋㅋ

[@KAMiJUINs]

동력성능은 정말 괜찮은데 운동성능은 높은 라이져패드때문에 고속에서 아주 살짝 불안하긴 합니다... 고속라이딩을 즐기시지 않는다면 플로우와 함께 꽤 괜찮은 보드라고 생각됩니다.

[@spartankittygames]

Was waiting for your review of this board! How do you think pneumatic wheels would work with this board? Better or do you prefer the stock wheels?

[@KAMiJUINs]

Thank you for watching ~ :) Well... I don't think I'll really know until I ride it.

[@spartankittygames]

​@@KAMiJUINsI'd be curious to hear your thoughts. I love the look of this board but where I live the roads are filled with cracks and super bumpy so I'd probably ask for the pneumatic wheel option.

[@wiembellil3453]

I have stinger with pneumatics wheels for the same reason, 200% more confortable but you will loose range and you have to change for tkp trucks but it’s fine 👌

[@spartankittygames]

@@wiembellil3453 yo how much they charge you for the upgrades?

[@wiembellil3453]

@@spartankittygames stinger with explorer 2.0 esc, and all terrains kit at 999$

[@Racule]

이런거 보면 역시 롱보드와 쇼트보드 1개씩 가지고싶어진단 말이죠 ㅋㅋ

[@KAMiJUINs]

저도 그 두가지 보드의 매력이 달라서 하나를 고르는 것은 어려운 일이라 생각합니다.ㅋ 여유가 된다면 둘다 경험해보는 것이 ~ :)

[@_Zer0202]

Wow bro good review 😊👍

[@KAMiJUINs]

Thank you so much as always, bro :)

[@f1xedclz401]

A during the range test what mode were you in?

[@KAMiJUINs]

I'm only using the highest mode in all test rides.

[@michaelwagner6410]

How did you like the stability between 25 and 30 mph

[@KAMiJUINs]

Actually, I didn't feel that good. I think the reason is that the center of gravity has increased due to the too thick riser pad. And I think it would be much better if the riser pad could be replaced with a thin one.

[@michaelwagner6410]

@@KAMiJUINs Daniel Kwan took off the thick pad leaving the metal thin one and it didn't rub with 105's. It's only there for the AT pu option that's why the flow doesn't have them I'm guessing. I plan on taking it off upon unboxing it makes the board SO much lower. Did you have the trucks set to a carve setting? Or did you ride them how they came shipped? This board just looks like such a blast. Everyone says it's stable for the most part because of the double 100A barrel bushings and deep cup washers I'm just trying to make sure I make the right choice. I love to carve my pants off but also don't want to get speed wobbles at 25 to 30 mph. The idea of an plus sized cruiser sounded cool and unique, I do a lot of city riding and the curb hopping aspect and turn radius just look so fun. Also just laying down all the power in short bursts seems fun with those 3000w motors. If you have any recommendations for below 1000 dollars preferably but also over 1000 let me know. ! Thanks for responding.

[@honeybee5474]

일반 클라우드휠과 차이가 있나요?

[@KAMiJUINs]

클라우드 휠 보다 훨씬 편하고 그립력도 뛰어납니다. 라이딩에서는 일반 클라우드 휠과는 비교가 안될정도로 퍼포먼스가 좋습니다. 다만 바퀴가 좀더 빨리 닳아버립니다.

[@skfunk4550]

Small boards are getting so fast and have specs that go above a certain known brand with 3 times the price 🤔 not saying who from OZ

[@KAMiJUINs]

Yeah, I agree~

[@ko-bk2uz]

Oz is garbage very dishonest company, cheaper parts are put on product boards to the USA ⚠️

[@user-tz5oo8ji4b]

Hello, I think this type of board and with the risers is too tall off the ground.

[@KAMiJUINs]

Hello~ If just using the street wheels, Yeah I kind of agree~

[@siqthepunk]

Love the specs but hate the deck design, if meepo sell flow deck, i will replace this board deck.

[@KAMiJUINs]

I want to switch to Stoke's deck~ lol. Thank you for watching :)

[@maxsuelusa2006YouTubeTv]

The only downside I can see is where’s the dash guards? 👎

[@KAMiJUINs]

These types of boards have a similar structure because the motor is mounted on the back of the hanger using a DKP truck. So it's difficult to fully use the kicktail

[@knoopx]

the riding height is kind of ridiculous

[@cjam3660]

no kick tail pads the desighn is made to conciel that short cut, horrable and ugly board design, very unpractical...a deal breaker for many.

[@ko-bk2uz]

But I still got one, it was a very hard decision

[@Ollv33]

strange choice to use panhead fasteners instead of countersunk? if you have to replace the grip in the future, you'll have to cut out the bolt holes?

[@KAMiJUINs]

Maybe it should. Or maybe I could replace the bolts with countersunk head bolts.