1950 Chevy Pickup Truck Part 2 - Installing C-Notch and Transmission Crossmember

[@nansfoodvlogs]

Never get sick of seeing each bracket design and fitting perfectly right into your other metal creations! Good info on the tires too. Thanks again Bellos Kustoms and Big Steve for another great video! 👊🏻

[@136092195]

A Big Shout Out to all of the Crew thank you for the teaching Come on next Sunday TCOMITY Lokochon😎

[@FrankAustinLowney]

Nice new welding gloves and an innovative use of an adjustable wheeled shop stool to hold the dummy tranny up at just the right angle.

[@jesseroberts9607]

Hey big guy missed half of last week because they had to rush me to the hospital again the 5th time this year bad year but try.to have my Bello customs tonic. Mike you mean a.whole lot to me because I can watch you and forget my problems for a while. Keep it going for me big guy

[@jimihendrix4202]

stay strong brotha

[@nowrist]

they don't call it custom for nothing . nothing but perfection !

[@hedrives]

Breakfast tacos and Bello’s Kustoms from near Aspen, CO! Typical great work from Mike with an assist from Big Steve and ForkLift!!! Can tell Mike is still a little under the weather. Get well soon, vato. Dale Shine!!!!

[@bobwilliams1535]

The parts you fabricate are beautiful, even the 'messed' up ones! Perfection rules at Bello's! 😊

[@glennstatham960]

Mike could sell those messed-up ones and we'd have a bit of Bellos!

[@65cj55]

@@glennstatham960 You can buy the unmessed up ones in his store.

[@tommythompson2630]

Glad you are both feeling better! Thanks Mike and Steve for the video, great job guys.

[@ionchhhhh4108]

I would really like to see a shot of those finished engine mounts from part 1, Big Steve. Please 😬

[@joedyer8824]

Hey Mike working at that computer would just melt my brain, my hat's off to you 😅

[@lazyhoundracing9621]

Thanks for the awesomeness. I'm building a 53 3100 drag and drive with a 1200 HP 6-71 blown/nitrous I6 292 and a T56 Magnum. I bought the truck in 1980 in SoCal when I got out of the Navy. Thank you for your time.

[@rodmarin3323]

I had to get my fix as well. Sunday morning a cup of jo..and we're ready. Though it's good seeing the perseverance of working through a cold. I heard that cough, some locochon medi and you should be all back in order. Keep updating your pantalla..we love it out here.👍

[@Mopar46]

Never gets old; watching those C notches getting fitted. Some people relax with a massage; I find it relaxing watching you doing your modifications. Cheers from OZ.

[@joedyer8824]

Mike still dealing with the cold ha. Hope you get better, hard to do good work when you don't feel good

[@Chester-d2b]

One thing good about your business . I watched all your videos and every time a car leaves your shop it looks like happy!! I mean that Brother!!!.

[@robertstafford3449]

We need to get Mike over 100k, we can do it!!!

[@joshuashattuck9267]

Love your work brother! 25yrs here laying down ppg and some house of kolors paints. If you ever need help I'm a ways away in Washington state but would love to help!

[@jessehermosillo8116]

Only the best, that's what I always see with mikes work skills, truly the best also Steve's camera work is totally outstanding. Always looking forward to seeing your videos To all at BELLO KUSTOMS MERRY CHRISTMAS AND A GREAT GREAT NEW YEAR 😀 2025,GOD BLESS YOU AND YOUR FAMILY'S.

[@shotsrodder]

Mike makes it look so easy 😂😂 love watching the master do his thing with such joy 👨🏻‍🎨

[@WalterWitt-os7ey]

Great job! I like my Sunday schedule, 8am Mass, come home, watch your video, and take a nap!

[@willwade1101]

We all have our "Summer" days. Summer good, summer bad.

[@sherrylockhart305]

YOU'RE EQUIPMENT , AND what you do with it is amazing ! 😊

[@andrèmeekel-n1c]

The feeling and the ''eye for perfection'' is back...!!!

[@davepatrick7848]

Hey Big Steve, Mike got his eye back! Thanks for another great video. Keep it lokochon always.

[@penguinbrand]

Beautiful work. Hope you're feeling better

[@mycomment922]

Mike, you are right on the money,you know what I mean?👍👍👍

[@patriotbrickrepairhotrodsa6099]

It's the ole safety squint !!!! 😂 And clean clean piiiiinky rang !!!!

[@oldblueshhrchannel1847]

Clean clean pinky ring! Nice C notch!! Mike you know what you’re doing! Nothing but perfection!

[@deeevans324]

Once again, this is another educational video. It would be my honor to send you guys some of my cigar club coffee.

[@kevinmcpherson6999]

Good morning all. Another Sunday of the perfectinus hard at work, making it perfect. Mike, u make it look so easy. Love watching your videos. Keep them coming, and I pray u feel better.

[@JoeRatcliff-j7y]

Great job once again..Can't wait till next week - love me some 4-links!

[@devschlong]

If you're taking suggestions on videos, less plasma table in action. The design is great but once you've seen a plasma table cut you've seen a plasma table cut. Not complaining though, one of the best channels on YT. Thanks for taking the time and making the effort to educate and entertain us! Very good work on everyone's part.

[@richardsmith-qy6vl]

Anyone who watches your videos can see how to do things right that's what I like I been fallowing you for 2 or 3 years and your work is always 1st class never half ass you take alot of pride in your work and you make sure it's safe like as if it's for yourself I was like that in the shop I worked at I could have made way more money my boss would tell me this car is not going in the world of wheels but I just ignored him and did it my way. And I was able to sleep at night I knew I did my best and gave it 100% of my ti.e and talent. And that way if for some reason someone worked on the car later on they could see the job was done right in body shops you don't want to get a bad name because that will fallow you the rest of your life. Thanks for the video mike tell Steve stop ducking around...lol

[@markstoll5881]

If I could have watched you in the 80's I'd be bad ass right now

[@noelmartinez4092]

Esso Mike saludos to you guys and el big Steve..glad your feeling better!! Oh yeah shout out to Mike too I bought a flannel super nice 👌 highly recommend them!

[@eworzero]

Every class I ever sat through I was “that kid” who would not shut up with the questions. I like sitting in Bellos Customs class to relearn shop etiquette.

[@mikebeidelman6051]

Mike, Happy to see you look and sound better. Awesome job as always with you and Steve rocking the action. mike.

[@almassicotte1204]

Love the way the trany bracket has bottle openers on each end! 👍

[@Impalabelair]

Good morning 🙏 to the car world 🌎 CLASSROOM IS IN ACTION 🎬 😎 THANKS FOR SHARING. I DIG ALL YOUR CRAFTSMANSHIP 🎉🎉🎉

[@HGNIRON433]

To Mike & Steve: Your videos are my ASMR (Autonomous Sensory Meridian Response) “Many viewers use ASMR and satisfying videos to unwind and reduce anxiety. The calming nature of these videos can help lower stress levels and promote relaxation.” Unknown source. Perfect for me to listen while stuck in L.A. traffic (during the work week) 🙋🏽‍♂️guilty of rewatching & listening to past videos. Subscriber & One who doesn’t forget to hit the like button. 👊🏽

[@anothermike-tv1fi]

if i lived close to your shop i would work for you for nothing. retired from the shop and i have nothing to do. keep up with building things i have always loved. just waiting for next week.

[@laurensmith1828]

I learned how to C notch from the best and it works perfect . The best part is cutting it out at the end ,lol.thanks for gifting your knowledge and expertise to the masses my brothers!

[@stevenneff2499]

Could watch Mike work all day Never gets old.

[@brianchristophe3380]

Dimanche soir, la meilleure vidéo de la semaine 👍

[@harrymeyer5895]

You haven’t been grilling for a while! You have to keep your “forklift” strong! 😂

[@RamiroPartida-v7g]

Excellent work locochon making it happen and helping others with their builds like you say be patient and sometimes put your tools down and have locochon help you out Always appreciate your work and not knowing what you’re doing

[@samuelbacon1596]

To Mike and Steve great video enjoy all the input Mike needs to be careful he still got that bad bronchitis cough………..be careful guys can’t be sick…………………… I wouldn’t know what to do on a Sunday morning!!!!!!!!!!!!!!!!!!!!I may have to go to church!!!!!!!!!!!!!!!!!now I know you’re laughing your ass off…………………on that one……………….. always enjoy the videos!!!!!!!!!!!!!!!!!!!!!keep up the great work tell Mike I bought my first saws all in 1978 for $135 in Milwaukee still got it………………….I got a picture of it I’ll enclose it with the Christmas card you guys goodbye Samuel bacon

[@vince8289]

Bello again makes everything look Easy. Great job!

[@PepeofCalif]

only thing I never heard in this one - 'What's for Lunch ?'🌮🌮

[@Carl-jf8fq]

Great background music played while plasma cutter is making brackets.

[@johnmahoney2178]

Nothing no better than some Bellos kustoms on Sunday’s you do good work Mike.as always another great video.💯🇺🇸❤️✊👍

[@rogermontee8264]

Very nice work!!!!! The c notches are great.Can’t wait to how the rear suspension comes out.☺️☺️☺️

[@ZakStanisich]

Alwsome video mike thank you and mike words can’t describe the magnificent work you do just magic

[@johnkranz4004]

Very nice work Mike

[@canman225]

Another fine job/video!!

[@Homer23D]

Puro efficient Lokochon!! Also good you don’t fear from making mistakes only makes you better for the next project. Everything is custom made to the customer fit. ☝🏽❤️🙏🏽 EEQUESU 54!

[@meganmilesreidmeganmilesre7372]

Another perfect Sunday with Mike ✅

[@TheOldaz1]

Seems I never tire of watching Mike at work. The thought and design of what's needed is always brilliant. Thanks Mike.

[@robertstewart7744]

Great job Mike. Happy holidays.

[@mikedmt]

Big Steve making tubing cuts is a gateway to fabrication. The dude is going to be learning the CAD software next. Careful Big Steve, it'll get in your blood

[@joewolf4483]

Real pleasure to watch the progress ... one of my favorite sites on the net ...

[@GeneBarker-y4j]

Another reminder to c notch to your tire size👍

[@RCCustomRepairs]

watching Mike build from scratch is amazing nothing but perfection locochone style👌

[@Chester-d2b]

I don’t know the name of that laser table, but it has earned the what you paid for it over and over!!!

[@36oldsaussiecoupe]

Love your work mike I learn so much watching you Thankyou 👍

[@ZakStanisich]

Sorry meant to thanks Steve for the video

[@CUATS232]

Good work like always bros by the way is carapella not with u anymore

[@dougreed9843]

You are a true genius an artist loves the low riders seeing what it takes. .

[@djgeefunk4090]

number 1 Fabrication work man, 👍👍👍

[@JimBosGarage49]

I love watching an artist at work. You sir one of the best I have ever watched. One day I hope to be that good. 👍🏾

[@kevinsachs5896]

Awsome video’s Great Work Watching From Tennessee 👍

[@keithwallington4966]

hi mike i was so much enjoying your work i went to the 51 chop if it helps and im not a doctor tri honey &lemon in hot water not to hot keepup the good work you guys 😎✌👍

[@tonyjones9715]

Thank you for another great video. I look forward to watching them.

[@mikekirkpatrick293]

Yes Sir ! Man I miss welding......

[@bobhalstead1879]

Awesum werk,cant wait till you learn how to do it right homie.

[@willwade1101]

An easy way to ensure you bend multiple pieces in the same spot is to have the plasma cutter cut a small slit where the bend should be.

[@jenniferroble8702]

Thanks for sharing another great video. Feel better soon.

[@mikedenson9063]

Outstanding work as always 👏

[@136092195]

Hit The C oranges all the time😎

[@allanbaldwn8494]

Great welding as well. You're the man .

[@mikl911]

Love your videos! Someone needs to buy the boss a real ruler for Christmas!! LOL

[@geofjonescustoms7332]

Alright , here we go my favorite time sunday morning

[@surindersandhi3924]

Hi My Dear Friend Very Very Great Job Sir ❤❤❤❤❤

[@allenbullard2237]

You need to make you a new shirt. BELLO'$ NOTHING BUT PERFECTION

[@WilliamBenton-f8v]

Well done and Merry Christmas to you and yours...PEACE....Bill

[@grumpymealey2441]

Love the videos keep up the great work 👍👍👍👍

[@77Sunsetstrip]

Yeah! It's Sunday and Bello's time😂

[@TheClavo223]

Great video once again .. haven't been here in a bit .... where's Carapila?

[@eddiedebeer1709]

Great piece of work guy's

[@gbatease]

Bill, Question even though the C notches are boxed in. Wouldn't you want to box in some of the frame along each side of the C notches?

[@jasonshaw9240]

Mike you know how you were talking about putting to much heat welding brackets to the diff and warping the diff ,is it the same scenario when ur welding the "c" channel plates and caps? Thoughly enjoy getting educated watching you work 😆 well is it work or the passion of putting another car out looking better than ever. 👍

[@JoeKingLeon]

The vibes changed. Turn that Tupac UP. 😂

[@33dodge97]

Beutiful welding!!

[@robostyle9773]

Thanks for another great video!

[@744ricardo7]

Cada vez aprendemos resucitar dinosaurios saludos desde Buenos Aires argentina

[@mikerios5184]

Great job

[@davidhyson9910]

I always close my eyes, Mike !

[@robertogonzalez9071]

looking clean lokochon!

[@glennstatham960]

Mike, can you explain in a video the difference between MIG and TIG welding and why you choose each one for different positions/welds??

[@Randy_51_]

Nothin’ but perfection