1955 Chevy pickup MAJOR Brake upgrade!

Dad's tri-five Chevrolet dream truck, gets some big upgrades to the leaky old brake system.
For more content visit:
burnoutsandrotorblades
burnoutsandrotorblades

[@joerudzik3238]

I installed a dual master cylinder on my 1949 Chevy truck,but used a master cylinder cap from LMC with a remote reservoir and didn't cut an extra hole in the floor. Was guick, easy, no problems.

[@user-cg9ly4wg2s]

You don’t use that puck in the master cylinder on manual brakes. That is only used with a booster! You need to remove it and put a longer stem on it if needed!

[@natas619]

i believe the little insert on the master is so when you are using a booster with shorter input shaft. If you left it out you may not have needed to cut the new shaft. Also, less chance of the rod falling out

[@stevenjones5121]

Good video only video I've seen that explains the proportion valve split front and rear and what needs. To be done

[@awakeariseandwatch5976]

That was a great video I have the same kit coming for my 1955 truck thanksit was a big help. The cover you got for the floor inside , I looked on summit but couldn't find it do you know the exact name of it pleas. thanks

[@clydecare]

We need an AC retrofit video on an old vehicle like this. Pre 78?

[@4eyefoxbodyfanclub625]

Would have been better if you went into detail how you rerouted the brake lines and what parts you used. Nice video though.

[@moosenuggets6697]

Where did you get the hatch cover? I ordered the adapter plate- they POL sent me the wrong one-

[@romansena1983]

Hey thanks for the link. Do you have disc brakes? I'm only seeing a combo valve for disc not drum. And is it necessary to run one? Thx in advance.

[@Smokeeybear47]

Would this set up be the same on a 47 f1 my brakes gave out and I wanna do this

[@pillochavez155]

endonde puedo comprar el cilindro con su base tendras el ling

[@oscarcortez6955]

Where did you get that locking little door.?

[@jasonsolomon3023]

Maybe you mentioned it but where did you get the specific kit and or the name of it? Thank you in advance.

[@romansena1983]

Can you provide links to the parts you used please?