1966 C10 l86 8 speed swap test drive

[@fat_cat8457]

I’m personally very interested in the 6.6 L8T and the aftermarket performance capabilities and I’ve found this channel to be one of, if not, the most informative channel for that. Keep the good work up!

[@youngestson6537]

Excellent A1.TOPNOTCH

[@rebelmrd]

What’s the final gear in it?

[@23steph13]

What mufflers?

[@joelhammack286]

Sick truck, nice job sir!

[@johnbehneman1546]

THANK YOU SO MUCH. TOTALLY AWSOME MOTOR, A TOTALLY AWESOME TRUCK. TOTALLY AWSOME VIDEO. THANKS FOR SHARING!!!

[@javilsx363]

Have you ever had a problem with the 8l90e not shifting in a swap?? Scanner says its shifting but the car starts on a higher gear and wont shift out of it

[@eduardopalacios2292]

What rear end gearing do you have? ....if you have a 4.11 , 3.73 the transmission wil not function correctly.....if you go into hp tuners and enter you 8l90.gear ratios it will tell you the proper.rear end ratio you need in order for it to not shift bam bam bam bam ....it needs it since the first gears are so short its trying to get you up to proper speed

[@427_garage]

i have an L83 going t56 can you do me a harness and if so how much would that cost me man im new to LT swaps and having trouble finding what i need

[@SD70ACE-]

Nicely done Sir, very talented individual indeed.

[@1452-w3b]

You should race some people 🤣🤣🤣

[@zacharyburks3491]

Im doing an l86 8l90 swap in my 65. I have so many questions is there any way i can send you an email or anything?

[@iliof1]

Hi I have swapped a 6.2 l86 and 8l90e in my c10 . I used psi conversion for my standalone and PCM and TCM. the TCM goes to quick relearn but the system gets aborted and it my autel comes with this message: 1_ the engine stalled 2_ although the gear selector is in drive the transmission exhibt the characteristic of neutral gear. I have used Dexhp fluid. The transmission has less than 50k miles on it. Would you know why its doing that. I really appreciate you.

[@iliof1]

Also I make sure I wire the tcc correctly.

[@631sonic]

I live in las vegas. I would love to where your located so i can get my engine swapped

[@swaptimeusa]

5000 w Oakey suite c11

[@ChachoGSX]

@Jon Cain why would you do such a thing?

[@haeloglobal5725]

Hi from Uk . I’m doing a swap on a 1990 Bentley turbo r . Can you tell me In what ways the l86 betters an ls3 . Reason I’m asking is I can get new ls3 here but have to get the l86 from usa and have it shipped over

[@dontasmith2241]

What trans is in it. 8 speed out of?

[@christopherboyd453]

probably a Denali

[@mrstinkytit]

What floor shifter do you have?

[@SRae86slide]

Where’s the ps reservoir located at?

[@TheBernieCarrillo]

Nice 👍🏽... I need mines swapped too

[@Diddy-fl4tm]

What Engine mounts you use for L86

[@AbstractDreamz]

What exhaust is that? Sounds like flowmaster . Please share the details. Definitely sounds chambered.

[@swaptimeusa]

Abstract Customs it is flowmaster. 2.5 inch exhaust with stock exhaust manifolds. It sounds great, !

[@AbstractDreamz]

@@swaptimeusa cool thanks

[@paulnyland5104]

Where are your coils mounted ?

[@RogueKnight33]

They're just under the plastic covers in normal location

[@NaturallyaspiratedJJM]

Very cool.

[@everydaylifewithme5260]

Very nice,rpm gauge don't work I see..

[@swaptimeusa]

Every day life with me not sure if speedo worked either. They have the can bus module. They just haven’t hooked it up yet

[@michaelleal958]

Running stock l83 a/c compressor??

[@natefullahate]

👍🏿

[@forpilo]

What gears does it have?

[@swaptimeusa]

3.73