1966 Mustang Restoration Part 6 - DIY frame straightening

  Рет қаралды 2,775

3rd Stall Garage

3rd Stall Garage

Күн бұрын

My right frame on the right side was too low. Follow along for how I measured and corrected the problem. Here is a link to the stock measurements:
www.vintage-mu...

Пікірлер: 36
1966 Mustang Restoration - Pt 8 Fitting a new firewall
12:49
1966 Mustang Restoration - Pt 8 Fitting a new firewall
3rd Stall Garage
Рет қаралды 2,9 М.
1966 Mustang Restoration - Pt. 18 Shock Tower Straightening, Alighnment and Location
41:48
1966 Mustang Restoration - Pt. 18 Shock Tower Straightening, Alighnment and Location
3rd Stall Garage
Рет қаралды 9 М.
Булли больше на улицу не выпускаем? 🌥 #симбочка #симба #булли
00:41
Булли больше на улицу не выпускаем? 🌥 #симбочка #симба #булли
Симбочка Пимпочка
Рет қаралды 8 МЛН
SHAPALAQ 6 серия / 3 часть #aminkavitaminka #aminak #aminokka #расулшоу
00:59
SHAPALAQ 6 серия / 3 часть #aminkavitaminka #aminak #aminokka #расулшоу
Аминка Витаминка
Рет қаралды 669 М.
💩Поу и Поулина ☠️МОЧАТ 😖Хмурых Тварей?!
00:34
💩Поу и Поулина ☠️МОЧАТ 😖Хмурых Тварей?!
Ной Анимация
Рет қаралды 1,6 МЛН
Как подписать? 😂 #shorts
00:10
Как подписать? 😂 #shorts
Денис Кукояка
Рет қаралды 6 МЛН
How A Top Gear Review Made Tesla Sue Jeremy Clarkson
14:51
How A Top Gear Review Made Tesla Sue Jeremy Clarkson
Phat Memer
Рет қаралды 514 М.
All About frame JIG's and why your Restoration Project needs one!!!
29:23
All About frame JIG's and why your Restoration Project needs one!!!
Carthage Classic Cars
Рет қаралды 16 М.
Pulling Frames: Fixing Frame Side Sway with a Dozer Type Frame Machine
24:39
Pulling Frames: Fixing Frame Side Sway with a Dozer Type Frame Machine
Lakeside Autobody
Рет қаралды 115 М.
The Six: YEAR ONE - 1966 Mustang Revival
55:13
The Six: YEAR ONE - 1966 Mustang Revival
Tom Pappalardo
Рет қаралды 66 М.
Measuring the frame rails on the 67 Mustang is a lot harder than it looks...
13:11
Measuring the frame rails on the 67 Mustang is a lot harder than it looks...
The Daily Drift
Рет қаралды 2,8 М.
Part 1: 1967 Shelby GT500 Mustang Restoration- Disassembly
41:34
Part 1: 1967 Shelby GT500 Mustang Restoration- Disassembly
Jerry Heasley
Рет қаралды 529 М.
Who Approved This and Why Is It Still Being Made? Wet Belt aka Belt in Oil Engines
19:34
Who Approved This and Why Is It Still Being Made? Wet Belt aka Belt in Oil Engines
driving 4 answers
Рет қаралды 760 М.
1965 Patina Mustang TIME-LAPSE Build Part 1
16:32
1965 Patina Mustang TIME-LAPSE Build Part 1
The Old Car Channel
Рет қаралды 11 М.
Bodywork Laser Straight Body Lines. Tape Measure Method
17:32
Bodywork Laser Straight Body Lines. Tape Measure Method
SYLVESTERS CUSTOMS
Рет қаралды 82 М.
How to Measure a Frame for Straightness and square SIMPLE - QUICK - EASY + DIY Auto Restoration
6:30
How to Measure a Frame for Straightness and square SIMPLE - QUICK - EASY + DIY Auto Restoration
Guzzi Fabrication - D.I.Y Auto Restoration
Рет қаралды 5 М.
Булли больше на улицу не выпускаем? 🌥 #симбочка #симба #булли
00:41
Булли больше на улицу не выпускаем? 🌥 #симбочка #симба #булли
Симбочка Пимпочка
Рет қаралды 8 МЛН