1967-72 Chevy & GMC Truck Power Window Conversion Install

Classic Truck Specialist Dave Welch show his step-by-step method for installing power windows in 1967-1972 Chevrolet and GMC Pickups. BROTHERS exclusive kit is the best kit available for adding power windows to your custom truck! Our bolt-in kit is constructed of 1018 cold-roll steel with brass oil-lite thrust bearings at pivot points for long lasting performance. Chrome switches and necessary wiring harness provide and easy plug-n-play design.
Product Links:
Power Window Conversion
www.holley.com/products/exter...
Window Channel Set
www.holley.com/products/exter...
Instagram: / brotherstrucks
Facebook: / brotherstrucks

[@jimmysapien9961]

Wow what a Great Electric Door Video 👍🏻 I do wish for a video on The Panel - Electric Switch installed. Thank you Brother

[@alphasquelch]

Loved the top view inside the door. Made it easy to follow

[@BROTHERSTruckPartsTV]

Thank you for that feedback!

[@aaaaaa-hd7zp]

Im in my early 40s and I just bought my first classic 1970 GMC C2500. Watching your videos is like my father teaching me how to work on it. I appreciate you sharing all of your knowledge. 🙏

[@BROTHERSTruckPartsTV]

Have fun with your new project!

[@jimmysapien9961]

Oh

[@CrisssssZ]

@@jimmysapien9961 Oh

[@malikdigger4544]

That is kool easy upgrade on those for any classic GM trucks but still luv ol school roll handle down windows.

[@neetones]

You are an excellent mechanic, host, and teacher. These videos are super concise and informative. Other channels could learn a LOT from you.

[@BROTHERSTruckPartsTV]

Thank you 100% for the feedback! We're glad to provide videos that REALLY help.

[@antonchigur4299]

Seriously. Some other amateurs spend time goofing off and cracking dumb jokes with bad camera angles and beat around the bush before like 5 minutes in finally getting into the project

[@robertemmons2260]

Loved the video! I'm looking forward to installing new power window regulators, window tracks and seals in my '68. To add, I've popped myself a time or two in the face while working on my old truck, it's something that we all can't avoid.

[@BROTHERSTruckPartsTV]

Good luck with your project! Thanks for watching!

[@maini80]

Helpful video I’m in the process of installing mine on my new doors (71’C20) before I put the doors on the truck where I’m currently stuck at is installing the switches a video short of the cutting when installing in the door and/or panel where the existing window handle goes would be very helpful before I get all cut happy thanx for all your hard work

[@michaelamans2780]

Wow, you sure know how to make a great how to video!!! Thanks for posting.

[@BROTHERSTruckPartsTV]

Our pleasure, thanks for watching!

[@Road_Rash]

Definitely doing this! Such an awesome upgrade!

[@c50ge]

I gotta get these electric windows for my 68! I really liked the switch I saw on another video of yours that looks like the stock window crank.

[@BROTHERSTruckPartsTV]

Great project for sure!

[@ericpost4732]

Great video series, for sure one of the best I have seen. I plan to do this and the vent window delete to my '74 C10. Hope this earned you another 10 cents.

[@BROTHERSTruckPartsTV]

Thanks for watching!

[@wrenched90405]

Great video - been bustin m hump getting my nu-relics in my Ramcharger. - but looking at ur video I’m thinking I’m going to do t rush and get all this tuff removed first -thx, great video

[@BROTHERSTruckPartsTV]

Thanks!

[@joelvallejo7451]

This is the second video I seen from you guys and it's just as awesome as the first one very great job explain things taking time to show I'm definitely subscribing

[@BROTHERSTruckPartsTV]

Thanks for watching! We appreciate the sub too!

[@HardArchie]

I was hoping you showed the installation of the FWC for the wiring, that is the part I need to see the most. Maybe that is in another video, I will look for it.

[@BROTHERSTruckPartsTV]

Sorry, what is the FWC? Maybe we can point you to something we have that will show that process.

[@rubenfilippus2956]

You are really professor Sir thanks for info

[@BROTHERSTruckPartsTV]

My pleasure!

[@theyellowtruck9622]

Nice job.👍

[@BROTHERSTruckPartsTV]

Thanks for watching!

[@Robert-un8jc]

Esta genial el cambio 👏👏👏👏👏 fantástico!!!!

[@BROTHERSTruckPartsTV]

Gracias!

[@garrycommander9351]

So excited to do that in my porsche damn bro

[@joejoe5137]

This is extremely helpful. However, I was hoping it would show how to run the new wired through the A pillar and into the door.

[@BROTHERSTruckPartsTV]

We just drilled a small hole 1/2" in each and ran the wires through with some of that Braided Insulation around the outside to protect them from chaffing.

[@InfoprosNetwork]

Great video, helpful as always. Sorry about the pop in the jaw...

[@BROTHERSTruckPartsTV]

Haha, someone who actually watched 'til the end! Thanks for watching!

[@deankay4434]

As a tech in a dealer, we fight the clock because pay is flat rate. Pulling steering wheels for some type of service is needed. Even though I had $4 in pullers, it takes time to find what you need as stacked on top of each other. Either way, I had a habit of removing the nut and pulling up on the steering wheel left & right side with enough force to pop them off. Once I took the nut completely off instead of 5 or 6 threads. It came off and spent an hour with “TP” in my nostrils to keep from bleed on a customers car. That is one of those mistakes, you only make once! ASE Master Tech since 1978

[@68Swiftshifter]

@@BROTHERSTruckPartsTV Hey, at least you set the pick down beforehand, right? :D

[@BROTHERSTruckPartsTV]

@@68Swiftshifter Good point!

[@larryweinberg1191]

Do you guys carry hand crank regulator for a 1986 Astro van or know where they are available with actual manual gear box that handle attaches to?

[@emma-zu9xx]

Love the video, very insightful. Would you know of a conversion kit that would fit a 2 door, gen 1 Mitsubishi Montero. the door style is very similar just on a smaller scale. Thanks!

[@BROTHERSTruckPartsTV]

No sir, we only specialize in Chevrolet and GMC Trucks, we have no sources or knowledge on the Mitsubishi.

[@brianswimmer]

Just switch over to a chevy, not similar and larger in scale.

[@PaganWizard]

Do you offer kits for a 71-72 Pontiac Grand Prix, and also for a 71-71 Ford Mustang??

[@brianway]

Hi, Great video! Do you know of a kit that will work for a 47 Dodge pickup?

[@BROTHERSTruckPartsTV]

Contact Specialty Power Windows, they have lots of different kits and some universal types as well.

[@Zkgod24]

Will this work for the 1 piece windows they sell for these trucks

[@bonnienorden3686]

Hello would you happen to have a video in how to put the original driver's side window in a 1967 dodge pickup. Im just replacing not up grading or modifying. Any help would be appreciated Thanks

[@BROTHERSTruckPartsTV]

Sorry, but we only do Chevy & GMC stuff.

[@bonnienorden3686]

Oh okay thanks anyway 🙂

[@TheBmco99]

One thing I would like to know do you have to buy new door panels you’re going to have a hole where the roller was or Does the switch go in the old hole ?

[@BROTHERSTruckPartsTV]

It's going to depend on how big the hole was where your handle went through. In most cases the hole is small enough to cover with the new switch. if it is too big, you can always create a small trim piece that will cover the hole and mount the switch into the trim. That way you can avoid the cost of new panels.

[@sparkydon99]

I have a 72. What do you do for the switch when the door panel comes out at the door crank hole?

[@BROTHERSTruckPartsTV]

You have multiple options. You could mount the switch in the raised portion of your panel where the handle was. You can also convert to a flat panel like '71 and earlier used. Or, you could use a handle style switch like we show here in this video: kzbin.info/www/bejne/ppLSn2WkqZ2qrrc

[@alankeith6667]

Would it be possible to reference the Brothers part numbers for the kits that you mention during your videos?

[@BROTHERSTruckPartsTV]

All of the links to the parts used are in the video description.

[@DaRealArtist]

I plan on installing electric windows on my 65 C10. I bought a 21 circuit fuse box, I noticed that it didn’t have a plug/wire for electric windows. This truck that your working on; does it have a plug for electric. windows? My understanding is that you ran the hot wire directly to the fuse box’?!

[@BROTHERSTruckPartsTV]

We run the hot to a relay that is connected either to a robust circuit on the fuse box or to the battery.

[@sterling-Dubois]

Does it work with one piece window conversions?

[@imlon2]

Is there a power lock conversion kit?

[@BROTHERSTruckPartsTV]

We don't carry one at the moment, but there ard some options out there

[@lomshmeli]

Are these automatic windows compatible with a 1961 Chevy c10 shortbed pickup ?

[@BROTHERSTruckPartsTV]

Here is a link to the kit you would need. holley-social.com/Brothers_PowerWindowConversion60-63_YT

[@paultribbett7765]

does the drivers side switch control the passenger window

[@BROTHERSTruckPartsTV]

Yes

[@jacobfullenwider971]

Does the kit include the regulators for both sides

[@BROTHERSTruckPartsTV]

Yes, our kit is for both doors.

[@derekormsby798]

Hey guys, Do you make this kit for '73 Chevy trucks?

[@BROTHERSTruckPartsTV]

Yes, checkout our website www.brotherstrucks.com

[@andresalonso2335]

Still waiting for a video , replacing the roof of a C10 1965. PLEASE”

[@BROTHERSTruckPartsTV]

Videos take time, sometimes a big project like this could take months to organize, shoot and edit. In this case, we also need a donor truck which we mentioned a couple weeks ago when you made the suggestion, which also adds to the timeline of creating a video. We will do it, but it's going to be a bit before you see it here on our KZbin channel.

[@andresalonso4654]

BROTHERS Truck Parts Yes, I recall you leaving me a message. Tried contacting you for more info because I’d be glad to let you guys work on my truck for the sake of providing countless others with that kind of tutorial. I never received a call back.

[@BROTHERSTruckPartsTV]

@@andresalonso4654 Please call again and ask for Alex. 800-977-2767

[@jamesconner489]

Could you make a new video for the one piece power window kit? 67-72

[@BROTHERSTruckPartsTV]

That is actually going to be available very soon. We are in the process of shooting and editing it now.

[@jamesconner489]

@@BROTHERSTruckPartsTV awesome I have the kit and have already modified the channels but I don’t know how the electrical part mounts inside the door. I didn’t see anything in the instructions besides drilling the 5/16” Hole for the A and B spots on the door

[@BROTHERSTruckPartsTV]

@@jamesconner489 James, we have a separate video about how to install the power motor assembly already, here's a link: kzbin.info/www/bejne/iKfaiqZ3fbpnf9E

[@jamesconner489]

@@BROTHERSTruckPartsTV that’s the power window kit that still has the vent window. I have the complete one piece glass kit that has a different motor. I sent an email to the [e-mail] account with a picture

[@BROTHERSTruckPartsTV]

@@jamesconner489 Which motor did you get? We use the same motor for all 67-72 power windows regardless of whether it has a vent or not. So two things cold have happened, you bought it a long time ago or we sent you the incorrect power assembly. Please call Alex in our Customer Service to get this resolved.

[@chickenfoundation9323]

Anything for a 65?

[@BROTHERSTruckPartsTV]

Yep, check this out: www.brotherstrucks.com/1947-87-CHEVY_GMC-TRUCK-POWER-WINDOW-CONVERSION-KIT-BOLT-IN/productinfo/NPW0000/

[@rubenmagdaleno2382]

Like around how much its the cost?

[@BROTHERSTruckPartsTV]

Direct Product Link: bit.ly/2CGEgXm

[@MegaGsizzle]

Poor guy seems to be ready to retire. Can I replace him!?

[@BROTHERSTruckPartsTV]

He's got a lot of good years left, but you can assist!