1984 Chevrolet K20 Abandoned Farm Truck Makeover! Will it Run?!? Used and abused squarebody!

We picked up this 1984 Chevrolet K20 farm pickup when a friend said his neighbor had a pickup sitting in their shed they wanted to part with since it was taking up space. They allegedly parked it just a "few" years ago when the hired man smoked the clutch. Lets see if we can get it running and back on the road in proper form! This K20 pickup is sold! As always, thanks for watching!
Check out our new and improved Mortske merch site!!
mortske-repair...
Join the "Duff Approved!" team to get access to perks like merch discounts, behind the scenes access and more!
/ @mortskerepair
Drop Duff or Mortske a line: [e-mail]
Instagram: / mortske_repair
Ship us things:
PO Box 1
Gwinner, ND 58040
Super Scraper gasket scrapers are for sale with pricing below:
SS1 1.25" wide wood handle - $33 shipped
SS4 0.625" wide long handle $31 shipped
SS5 0.625" wide short handle $28 shipped
Payments via Paypal or check vial snail mail. PO Box and email listed below.
Tools we use:
Greta Unapproved Fuel Jug: amzn.to/30R74bt
Noresman drill bits (not the 3 sided ones I like, out of stock): amzn.to/3n5UoVr
Norseman reamers: amzn.to/3B0YMtH
Spill proof funnel: amzn.to/3BmRMbd
Teslong endoscope: amzn.to/3sxysos
Trouble light: amzn.to/33756kQ
Streamlight Pen Light: amzn.to/3gSe3qA
Zep45 Penetrating Oil: amzn.to/3taR64i
Marine tank: amzn.to/2S6oUmf
12V inline fuel pump: amzn.to/3eHOGVC
1/4NPT to 5/16" hose barb fitting: amzn.to/33qPSYp
5/16" rubber fuel line: amzn.to/2SsLNjZ
Hot Sauce bottle: amzn.to/3u96zmS
Loser switch: amzn.to/3xEuL2s
Milwaukee 3/8" cordless ratchet: amzn.to/3wsHW6a
Milwaukee 1/2" Impact: amzn.to/3xDpzMb
Milwaukee 3/8" stubby impact: amzn.to/3e61pT9
Tekton 3/8" SAE deep impact socket set: amzn.to/332CZDv
3/8" wobble extensions: amzn.to/3nANCXw
GearWrench spark plug socket set: amzn.to/3uutdG9
Smittybilt XRC12 Winch: amzn.to/3eGG2qx
10 Ton Snatch Block: amzn.to/3gO6voI
Ingersoll Rand air hammer: amzn.to/3e7ULLY
Barrina LED Shop Lights: amzn.to/3gWiHDR
Filming equipment we use:
GoPro Hero 8: amzn.to/2PHSU7m
Carrying case: amzn.to/2ScTqeh
Camera tripod: amzn.to/3gOyULd
Camera light: amzn.to/2PB2SHp
Handheld camera mount: amzn.to/2QJBWG3
Suction cup mount: amzn.to/3vqC1Nw
Sammich donations gladly accepted on Patreon :
www.patreon.co...
#squarebody #K20 #mortskerepair #longbed #dentrepair #bodywork #farmtruck #worktruck #patchpanels #daycab #regular cab #nostart #brakes #suspension #clutch #upgrade #transformation #rustfree #shortbox #dailydriver #restoration #abandoned #ranwhenparked #barnfind #patina #oldjunk #mechanic #rusty #rust #hackmechanic

[@jayh4185]

Mortskes repair and daycare 👍👍👍👍

[@MortskeRepair]

Your one stop shop!

[@cwbintn8949]

*and Olympic gymnast training facility

[@MortskeRepair]

@@cwbintn8949 We have it all!

[@alanwbelcher]

…& sammich shop!

[@alexbaker9967]

@@MortskeRepair is that a gas 5.7 litre or a gm 5.7 litre diesel engine

[@amigaboy]

the saying :" I hate all vehicle manufacturers the same" is a mark of a true vehicle connoisseur :)

[@jockmchaggis6797]

We mechanics say it too.. once you've worked on stuff long enough you come to realise its all garbage, I hold a particular disdain for when anything french or Italian turns up to the shop though

[@amigaboy]

@@jockmchaggis6797 I dont know. I hate them , all but from all the cars I own, the frenchies work the best xD. But Italian. Yeah. A bit of a mechanics horror story xD

[@volvosruinedmylife]

Older volvos are easy peasy to me.

[@amigaboy]

@@volvosruinedmylife i see no incorrect statement here :D

[@bigsmoke1811]

@@jockmchaggis6797 I'd say France has most countries beat but everything is different. All cars are made to break but Italian cars REALLY define junk. All American cars are the same, some have extra steps, some have less steps. Japan had some good cars but even their manufacturers have cons. You'll never find a perfect car and it's quite unfortunate but I still enjoy working on cars, motorcycles, dirt bikes, four wheelers and BMX bikes. I'll work on any vehicle. Pretty much just anything with wheels.

[@seangill7985]

Dude....crushing it with the full length Squarebody videos! Keep 'em comin'! Sometimes you just can't help but keep an old work truck out there working. Cheaper than a new truck any day and WAAAYYY cooler too. That thing's tougher than a $2 dollar steak!

[@MortskeRepair]

Rougher than a night in county jail!

[@larrykelly4905]

Lo😂

[@Cody-ew5zw]

Dude I love everything about that truck, wish I had the money to buy that one from ya. Love your shows by the way man, thanks for doing these!

[@MortskeRepair]

Thanks Cody!

[@stuartcote4915]

I don't like manuals and don't need four wheel drive or a full size truck but it is cool. I wanted to put roof lights on my el camino. This thing needs a spot light and a headache rack. Also either a toolbox or a gas pump in the back.

[@1980bwc]

@@stuartcote4915 How can you not love manual transmission? It doubles the fun of driving. I thought nearly all car folks like us liked manuals.

[@IeeIee778]

@@1980bwc yes true but if you make the wrong move to many times it's gonna be a problem

[@phdpeach6567]

Hello, thanks for making these videos. I've recently got into the car business thanks to Mortske repair and Puddin's fab shop. I enrolled at UTI Houston to be an auto mechanic. Truly thanks to you both for allowing me to watch and learn what these parts are and how they work. I hope to meet you both one day; keep these coming and I'll keep sharing and liking for the ol' algo-rythm

[@MortskeRepair]

Glad to hear it! Good luck!

[@boblamb8421]

Hey Mortske & Duff. That was a really great informative video. I learn something new every time. My 26 T rat rod is done and licensed. Just waiting for the 4.5 inch wide old school mag wheels and tires for the front to arrive from Summit. I have done probably 500 or more clutches during my career as a heavy equipment mechanic. From semi's to pick ups. You made installing that shifter clamp look easy. I can recall fighting many of those. They almost go then slip off. Here we call Crescent wrenches Mexican speeder wrenches. One for Puddin is an Oklahoma socket set. Square bodies are hot here on the west coast. I have offers to buy my 86 C30 crew cab dually all the time. I bought it new. Just got home from the gym and looked forward to spending time with you and Duff. Thanks. Have a great holiday.

[@MortskeRepair]

Glad to hear the T is ready to go!

[@Newtruck99]

I love square bodies. We had an 85 suburban that I learned to drive on. I'd own one any day!

[@Lions7.62mm]

SPEEDER WRENCHES = Mexican socket set up here in the PNW‼️‼️🤣

[@DaveyJonesLockerwithJazzy]

That's the going value for squarebodies these days, I'll need to consider container & NOVA import vat tariff 🇬🇧 ? Price to me on invoice for a fiver 💵 and I'll wire over the REAL value.. that'll save on duty and I can escape The Revenue Man 💼

[@bmacd2112]

For a 37 year old truck, it's in darn nice shape and a very reasonable price as well. Enjoyed the video...Thanks!

[@MortskeRepair]

Glad you enjoyed it!

[@rsprockets7846]

@@MortskeRepair do an rattle can urban cammo on exterior leave interior alone

[@ricardofierro7041]

How do you know how much he paid ? Or is that comment about how much he wants. Either way how much did he pay OR how much does he want? Thanks

[@haroldstrickland1513]

I love the chicken lights and 4 speed manual. My '79 20 Scottsdale and my '55 6100 series have these 4 speeds as well. That is a great truck and looks very solid.

[@stuartcote4915]

From twenty feet away. 😂 It shouldn't have been too hard to find a buyer. Its just an old farm truck.

[@davidarnette327]

Mowerman in the snow, you should build him an canopy to put around it and a portable heater. Also you did good job with the kids ,you and Duff could start a daycare for Dogs

[@garydority9754]

Another Great Save!! You just can't kill those SBC's. Good to see Duff's tail wagging again! Keep doing what you do, and thanks !!

[@stephensaasen8589]

What a nice low rust truck. Truly amazing how some don't hardly rust at all. The reason your clutch pedal wanted to stick to the floor is there might be a clutch assist spring under the dash. It connects to the upper part of your clutch pedal arm and is angled in such a manner that it creates kind of a detent action. As you push down the clutch pedal, the spring will stretch a little but when the pedal reaches about half way down, the spring starts to contract again and pulls the pedal to the floor. When there's resistance against a working pressure plate, it helps assist in disengaging the clutch. If there's no resistance from a pressure plate, the pedal drops to the floor and stays. My old 1972 F250 has one and that spring is pretty hefty. What's really fun is mine has plastic bushings the spring hooks ride on to keep from wearing on the metal where they hook. I needed to replace those bushings. It wasn't hard popping the spring off but boy was it fun trying to stretch it out to get it back in place...

[@civicute89]

Happy MOrtske Monday 1st Finally LOL :)

[@revivalranch4231]

I bet you could buff that paint out to bring the color back around. Really dig this truck. Is it going up for sale?

[@stevedeacon1213]

Check the description ;) $3500

[@92xl]

If you're interested in this pickup it's in basically the same shape as shown in this video with a clear title for $3500.

[@jheibeck6059]

Murphy oil soap on that old laquer brings the paint right back

[@jeromebreeding3302]

You are in a little deep on this one, but if you want to ride, you got to pay the freight. Keep in mind, used trucks are going for a mint, at least in the north-east.

[@tomstarcevich1147]

Dam I sold my 99 ford f150 super cab 4x4 with the 5.4 v8 for 3,000$😳

[@J.R.in_WV]

Figures she sold quick, I just hope the new owner doesn’t lift it and or put bigger than 16.5” steel wheels on it, right now it’s just what a square body should be: stock height, stock steel wheels painted white and poverty caps!

[@greifill]

I'm impressed with your bodywork skills. I spent a fortune on fancy bodywork tools, when all I ever needed was a customized tree stump and a quality, blowout-sale hammer from Comrad Freight.

[@MortskeRepair]

There you go!

[@nicholasarrigo3733]

this truck in tennessee would be price wise around 2k not running if you got cheap and did very little to get it running you stole this one man and also you did a very job fixin the bedside too and as i old bodyman once told me i will make a bodyman out of you yet .thanks - nick

[@bradsmn]

Monday mornings are always tolerable with Duff and Mortske! I look forward to the knowledge, the pain and the humor every week.

[@jamespn]

What I’m thankful for, Greta saying, how dare you.

[@marc11467]

Another great video Mortske. I totally Crack up everytime you mention whiskey dents. 😂

[@MortskeRepair]

Haha, we got lots of em around here!

[@lukefeekings4404]

Ha Ha Haaaa!!!! I was first in best Dressed Thank you Mortske and Duff for the best channel on youtube !!!!!

[@billnalder1017]

Actually the Dealers did that pin striping...i bought an 85 GMC short wheel base K1500, black in color and since it was somewhat of a plain jane and not standing out from the other 50 trucks they had in the lot, they called the best pinstriper in Utah to dress it up and catch somebodys eye....it worked for me hook line and sinker and after only 3 yrs of bank payments i owned it...and still do!!

[@danielsimmons7397]

That is a fine looking truck you have there buddy!

[@billnalder1017]

@@danielsimmons7397 oh thank you sir!..being the original and one owner of it is pretty cool for sure..

[@MortskeRepair]

That's awesome!

[@stuarthilton712]

Mate watched all your videos ;-) your class mate… love your humour and you knowledge pal. Cant beat a big V8 had a Dodge Ram 1500 Quad Cab on an 04 plate for years loved it. Give us a mention on your vids Mortske Channel…. Stu from Manchester, England ;-)

[@Ian-of9oi]

It probably been said in the comments already but the purpose of the shank on clutch bolts is greater shear strength. Regular all thread bolts could all break off flush if you did a rev and dump. Looks good so far.

[@jos642]

Awesome truck I’ve got a 83 k20 4x4 350 4 barrel 4 speed if u count granny gear L with 3 speed just put rocky ridge life 2 new tanks I love ❤️ it Good luck with her n God Bless 🙏❤️👍

[@robertvance1873]

Hello Mortske, that's a great old Truck definitely worth putting some more money 💰 into it I really enjoyed what you did to it and also learning Thank you, Loved how you interacted with the kids hilarious 🤣🤣. Hope you and Duff Dog had a great Thanksgiving.

[@MortskeRepair]

They're good help!

[@VideoServicesVB]

Better learn to "like" exhaust...... $$$$$. Better to do that than pull heads, unstick engines and rebuild starters. But, then that's why viewers tune in. Exhaust not very flashy. Lol. 👍👍🍕🍺👌

[@darryljones9011]

Hey man, there's so much negativity floating around out there. I just want to tell you personally, what a joy it is to watch your videos. I have been working on cars since I was 10 years old, and by my own admission I am a hack mechanic. I am also a handyman. I am also a registered nurse, with a background in ICU. Never owned a new car in my life. Still dragging home old cars and restoring them, to the best of my ability anyway. Just want to tell you from the heart that your videos have been a lot to me, and they are honest. And I don't give a #$$_&#@ what anyone says, you are a damn good mechanic. And at more than one point I have laughed out loud hysterically at your humor. May God richly bless your channel, and may you succeed to your heart's content. Darryl Jones Nurse Central Florida

[@MortskeRepair]

Darryl! Much appreciated for your kind words, your comment and most of all, for watching our content! Have a great holiday!

[@arthursmith3401]

Funny, he's trying to start her at duff's, and they play a brand new Silverado commercial, lol, but, I'll tell ya , fer real, I miss looking down on that dash, I'd pay to relive some of those days!!!!

[@emilmaki3001]

What a bargain, you can own this beast for less than the cost of a Polaris 4 wheeler! Love Mortske Mondays!

[@MortskeRepair]

Way better investment!

[@briandrake9467]

I have lo mi custom d, in stupid red with black pin, she is a 454 two wheeler, she's my poortruck people would give me good deals before, but know big red is worth like 7 k here in Oregon.

[@Cristobal_Ygnacio_Arriaga]

$3500 seems like a good deal for this truck. Wish I had money. My family has owned a 1986 C30 since new, that one has a 292 and a 4 speed. It’s very slow but I like it.

[@MortskeRepair]

Stump pullers!

[@Jerkwad152]

Not only will it run, but it will cook your breakfast, and provide free unlimited uberschnief.

[@MortskeRepair]

Right!

[@loganpark7993]

Very impressed by the corner repair. I figured you were going to cut it out of the brown box

[@MortskeRepair]

Glad you enjoyed that.

[@martentrudeau6948]

That was brilliant.

[@MortskeRepair]

@@martentrudeau6948 Thanks much Marten!

[@martentrudeau6948]

@@MortskeRepair ~ God bless you and yours, and thanks again.

[@MortskeRepair]

@@martentrudeau6948 Same to you!

[@madmodifier]

Howdy from blue plate land. I only go to your better southern neighbor to shoot pheasants. :-) Thanks for another video.

[@timothyballinger6280]

What a dream shop. Hell I'd even like to have a shop like yours. When I work on something at home I got to move the cars or shall I say car outside to have any room to work. One day I'll have another big shop. Hopefully!

[@stuartcote4915]

I don't park in the garage. Too small to get in and out of the car comfortably.

[@stuarthilton712]

I would love to do what you do, iver here we have wimpy cars and pickups so ppfftt its pointles. Keep up with the good work mate, love them

[@magazinestbarbershop]

Man...from all the squarebody fans out here in the interweb we thank you for all the c10 content Morstke. btw the last video on metal repair was great

[@rsprockets7846]

a master at work

[@MortskeRepair]

Thanks for the kind words and for watching!

[@magazinestbarbershop]

@@MortskeRepair Go on keep "Big Red" you know you need another C10 squrebody!

[@MortskeRepair]

@@magazinestbarbershop Nah I'm at capacity already!

[@blue68falcon]

that thing is in...a shape of some sort. an orbital waxer would make quick work of that paint i guarantee.

[@SuperMAZ007]

Oh yes the lawnmower man is back and I thought he ain't driving in the winter. Actually learned a lot of new things from this video, so thank You Mortske.

[@MortskeRepair]

Glad to be of educational assistance Steve!

[@keithharden7844]

@@MortskeRepair Who needs UTI when you've got Mortske to learn ya.

[@MortskeRepair]

@@keithharden7844 Ha, you ain't learning much around here!

[@keithharden7844]

@@MortskeRepair I am impressed with the bodywork on the truck. You made that tail light look like an easy repair. I probably would have made it worse.

[@stuartcote4915]

@@keithharden7844 Thought he was going to say go cut it out of the parts truck but he was talking about the stump.

[@derrickodyes1934]

Take some money to make it a butte like a silverado package plus about $30,000 in other parts

[@TheHord]

Nice! A 4x4 with a manual trans, love it, a perfect combo and a good winter beater to have around or flip/sell.

[@rsprockets7846]

keep it a year or two and it will double in value 6k to 12k

[@LuciFeric137]

Now yer talkin bubba. They dont make em like that anymore. Chip shortage? Hahahahaha

[@lorenmeyer5290]

Great job bring the red truck back to life! Enjoyed watching and listening!

[@MortskeRepair]

Thanks Loren!

[@justthes7093]

Think you’re taking a beating on that one. Duff prolly let u slide on the mortgage this month.

[@CARSON441]

those pliers that come in HONDA motorcycle tool kits are only the best if you enjoy blood blisters!

[@jockmchaggis6797]

Being an ex honda motorcycle/atv tech.. this one hits hard! Those pliers are the tools of the devil 🤣

[@MortskeRepair]

Haha, I'll be sure to toss them!

[@Mind-your-own-beeswax]

6 gallon of fuel would cost you about $50 here in the UK. So $30 is cheap where you are

[@BasedBidoof]

I always love how many things I learn from you, while being entertained. Never heard K is 4wd and C is 2wd

[@MortskeRepair]

Glad to hear it!

[@jeaniepatterson2384]

I didn’t know that either! I learned something new today!

[@garymccord4277]

Hey that sure is a lot of truck for not much money. If you ever checked the price on ZERO TURN mower. or used 4x4 side by side that truck with the problems fixed is super cheap for a nearly rust free 3/4 ton monster. Some one Could buy it for Christmas and still have money left to finish it the way they wanted Great video

[@itseithergonnaworkoritaint7852]

Hey, you forgot to grease the seal before you installed it. Loved the body work part, was very cool how you made the bed functionable for the tailgate again. Would love to see more rust repair on these old cars and trucks before they leave you. Most guys don't have a welder or know how to replace panels but can easily figure out how to use Bondo and sand paper. Maybe offer panel replacement with the sale of some of these rescues? And the cooler ones do the panel replacement anyway?👍

[@MortskeRepair]

Guess I've never greased a seal. Can't hurt I suppose. I avoid bodywork if I can!

[@itseithergonnaworkoritaint7852]

@@MortskeRepair You don't like bodywork but you're so good at it. Maybe get an apprentice to help with the bodywork? A retired guy that wants something to do or a high school kid that wants to learn? Maybe you can get up to 2 videos a week? Dealers choice of coarse.

[@stephensaasen8589]

@@MortskeRepair you wanna grease a seal. I've seen them burn up with no lube on them. I saw a feller replace a torque converter seal on a forklift in record time. I know he installed it right but he didn't grease it. Instant tranny fluid all over the floor as soon as he started it. He got to redo the whole job because of that one little step overlooked.

[@MortskeRepair]

@@stephensaasen8589 Interesting, never have had a problem and I've put dozens of em in.

[@MortskeRepair]

@@itseithergonnaworkoritaint7852 You can't find help, good or bad, these days. Nobody wants to work or they already have a job.

[@natevanlandingham1945]

The other part of the gun rack was in the glove box! That's the good old school kind from the 70s and 80s

[@phillipcortel6330]

Taylor! Find out what grass Cleetus got for Freedom Factory.

[@arliebowman9756]

Sounded like Christine the movie car when Arnie first drove her to Darnell's

[@billnalder1017]

They put this ridiculous hard plastic skid plate over each of the gas tanks in those truck which did nothing more than trap dirt, mud and moisture between it and the tank and caused pin hole leaks everywhere!..i personally have tried every tank repair known to man and everything works- for about 2 weeks!..the only real fix for the squarebody is new tanks- trust me~

[@MortskeRepair]

Yup, poor design.

[@natevanlandingham1945]

All that junk you have laying around I would of picked a light out of something and not bought one.🤣

[@clifrobinson7374]

Love that ole truck ive had a few of them regret ever day i soldem great videos keepem commin

[@benjammin4456]

Lol the “jimmy warner toothbrush”.

[@MortskeRepair]

The finest in dental hygeine!

[@danandyong6653]

I've always been under the impression the "C" designation was Chevrolet, and "K" was GMC not 2wd, 4wd, or weight class, 1500, 2500, 3500, etc... never seen a Chevrolet truck with K designation, or a GMC with a C designation. Reply??

[@MortskeRepair]

Yup. Just like I said.

[@albertbasson6611]

My Duff's name, is Dúghall... a Scottish Terrier...

[@jrussellcase]

Automotive electrical work just sucks. Period. Especially on GMs. I've done my share. That whole "Well, I got brake lights, I got a left taillight, I have no backup lights.....oh, and suddenly the dash lights no longer illuminate and the horn won't blow". Uuuugggghhhhhh......

[@MortskeRepair]

Yeah it's not relaxing that's for sure!

[@MadsWorld34]

i found the best way to fix a chevy is sell it and buy a ford. HAHAHA

[@jeff0547]

I have an 84 C-10 and the rear-view mirror kept falling off of the windshield. One day I was at the junkyard and discovered that a Scion Van (looks like a boot) mirror will screw to the roof panel of my truck. NO MORE falling mirror. Just some FREE advice. Do with it what you want. good luck.

[@MortskeRepair]

Problem solved!

[@troyrosenbaugh9935]

God bless my pota power kit. Saves my ass all the time... I learned a lot watching your vids, mostly great shortcuts, would love to build a hot rod with you, plenty of sandwiches would be drank. Keep up the good work, love your vids and Duff is awesome, my grandad had Brittneys they are amazing dogs...

[@MortskeRepair]

Glad to hear it!

[@deanharrigan7223]

1:16:23 Duff says, “At last! Indoor plumbing!”

[@DanDan-yy8sf]

Ye old red ranch rig, not a bad looking truck from far away. Body is not to bad , but she looks like she was rode hard and put away wet. Definitely some farmers were in there with with some baler twine and scotch tape. This was a great episode, it covered a lot of different repairs and skills in order to get it right. Nice of the Muff'en Man to let you use his shop. Hot Damn he's got a nice set up there. Mortske might be running a bit hot because Muffins shop probably has in-floor heating.. Standing on a warm floor with radiant heat rising up on your body is very effective & efficient, But Mortske, he's a thinking man, and he knows that a suitcase of icy-cold samiches should keep a feller Kool for the duration. The resurfacing segment was a nice Lil' tidbit of video, not enough O's in the word smooth to describe how slick that clutch went in. I especially liked the body work you did on the rear fender tailgate corner, and that was bad ass tree stump trick. Nuff said, Duff says

[@MortskeRepair]

Thanks for watching and commenting!

[@MarkFromMaine420]

Mortske tell Duff good choice this week!! My favorite Chevy truck model I never got mine built back up in highschool loving it brother thanks happy turkey samiches from the sober Maine IAC later mort

[@MortskeRepair]

Right on!

[@burtonbird5518]

Girl had me sketched out when it looked like she was gonna do a pull-up on the crossmember. Liked the clutch repair. Best how to vid. Need to see a Duff rabbit hunt. Great pheasant hunt vid. Do more hunting videos. Reminds me of the comical Uncle Sets you above the rest of the other channels. Thumbs up. Do more. Thank you

[@MortskeRepair]

Thanks much!

[@johncatalano7185]

Hey Mortske..... Nothing like having a bunch of juvenile delinquents as mechanics helpers.....

[@MortskeRepair]

You got it!

[@russelladams6432]

Shit... Knock that other running board off, replace the windshield, buy a 30 of stones and quick hand wax.. and drive it.

[@MortskeRepair]

Sounds like a plan!

[@MarcHord-mk5ff]

I see a starter in your future. One minute in, just a Chevy thing.

[@richardbates2367]

Column mount dimmer switch and windshield wipers for 1984 first year of column mount dimmer switch and windshield wipers

[@MortskeRepair]

Great info Richard!

[@antonioosejo4265]

sure seems like boomslang Brian is a nice guy, if u can just get him to stop cross dressing on Sundays. Good video, went ahead and subscribed so keepem coming

[@MortskeRepair]

Haha, he's an interesting cat!

[@grassy-qb6qc]

All those fancy channels what you ain't one of them lol you should be I enjoy watching you more than the others they spend more time spinning around in circles nowadays than actually working on anything.

[@MortskeRepair]

Much appreciated for the kind words!

[@robertpimpo4698]

Can't say nothing bad about them chevys they just want to run fix her up cheaply and get some money great episode mortskee happy thanksgiving

[@MortskeRepair]

Thanks, you too Robert!

[@camaroguy2919]

I have an 82 3/4 ton with the inline 6 love my truck it's awesome.

[@BMXnGaMeR]

squarebody seats are all the same as far as bolting in the cab but the seat frames and tracks have to match each other year breakdowns are 73-76 77-80 81-87

[@MortskeRepair]

Thanks for the info!

[@mikekozi-lester3887]

Looking Good nice metal straightner Sling Shot Engage

[@haroldrogers6083]

44mm would be the outside axle bolt on some front wheel drives

[@kylejo1986]

Kids are great. Mine are 7 and 3. The youngest keeps going around saying fix it dad or dad I fixed it which means he just broke something.

[@MortskeRepair]

Haha, good stuff!

[@secondcreekworkshop3908]

Its funny my 1987 Chevy V20 has a factory stainless steel exhaust that is still rock solid, the body is rusty as **** though,, I am not sure why GM put a stainless steel exhaust on the C6P package.

[@MortskeRepair]

Interesting

[@browncarp]

I was at the Moultrie swap meet last weekend and saw a fellow walking around with a Puddin's Fab Shop T-shirt on.

[@MortskeRepair]

That's awesome!

[@josephpilosky4775]

Good morning truck does not look.to bad HI duff dog🐕‍🦺

[@kennethscofield4565]

Chevy...made outta lightning bolts, rottwieller's and toenails.Chevy....its that easy !!

[@MortskeRepair]

You got it!

[@gertjandekovel5877]

Hey mortsky. Great Job. You make this car better. Fantastic result. I like the way you do it. Duff dog was not much helping you lol. Keep on going . Make this car real good. More bodywork. Good wishes

[@kenmanzo8471]

I would trade gas prices with you any day !! California sucks $5.20 gallon !!

[@MortskeRepair]

Ouch!

[@shumakerguitarworkssgw9505]

Dude there’s coolant and smoke and sparks coming from Boom Tube Brian’s Record playing machine

[@MortskeRepair]

hahahaha

[@dudenamedclem]

It's not pink, it's SALMON!!

[@marksbikeexports5123]

Yeah, pink salmon.

[@natevanlandingham1945]

Yikes that's some sketchy stuff!!😳👀😬, Seeing a guy lifted up to the power pole and grabbing and wiggling wires 😳🔌

[@MortskeRepair]

That's why we record it!

[@billhooper85]

Looks like ole Mortskes and duff got a new hunting rig

[@roypotts9123]

Chevy truck square body 74-79 cab an bed

[@dalealmond9454]

My neighbor had a pickup that looked identical to that 84 it was a really nice pickup back in the mid eightys he used it to pull a tree spade she got a workout

[@MortskeRepair]

I bet!

[@joebrock9784]

Cross your tires from front to back from left to right and put them on the back in the back ones on the front and you can wear them back around somewhat

[@MortskeRepair]

If they're square, I think it's too late.

[@troyrosenbaugh9935]

At in transfer case?? Interesting. I've only seen gear oil in em. What's the big difference?

[@MortskeRepair]

I presume the bearing clearances.

[@RayBenson45]

Hey mortske you need to send those floor mats to puddin for the yee haul lol good body work there on that tail light looks much better🍻

[@MortskeRepair]

They're not nice enough for that rig!

[@trevorreece6999]

Alright, I am officially imprest! That stump trick is a good one to have.

[@MortskeRepair]

Glad you liked that!

[@tracymcdougal6381]

Great overall nice build. Amen good enough for my new side girlfriend and of course my wife.

[@MortskeRepair]

Both of em!

[@HillbillyAdventures]

For now on let’s just send all the bodywork to Cold War motors in CA that dude can take scrap sheet metal and make an entire body with just body hammer and a stick of wood lol

[@MortskeRepair]

He's no hack like me!

[@derrickodyes1934]

Being a manual trans should be corporate 14 bolt full floater not the cheap semi floater on a auto trans triuck

[@MortskeRepair]

Never knew they were different!

[@kmani69]

Love the color mate bwahahaha

[@clearingbaffles]

@31:20ish $40 if you help How many uga dougas for the pressure plate?

[@MortskeRepair]

3ish

[@jockmchaggis6797]

Rare day off for me so I get to watch as soon as its posted! Sweet looking rig