Today I'm doin' some carb repair on this '86 XL600R, gonna see if I can get this rig runnin' after sittin' up since 1993! Thanks for watchin'!
Пікірлер: 120
@DRaysShop12 жыл бұрын
You will need to replace the mixture screw to be able to get the idle mixture right. Thanks for watchin'!
@lukewalters4716 Жыл бұрын
Miss your how to videos buddy. You really were one of the best ones. Revisiting this video again yrs later and got me right where I wanted. Hope your doing well.
@marcperreault11224 жыл бұрын
Great that you describe the choke circuit difference in the carb bowls. I looked at mine couldn't tell which was which and the manual didn't specify. Thanks!
@tsauleda6 ай бұрын
Do you still have the workshop manual? Could you please send it if you do?
@prairiemotomb6 ай бұрын
@@tsauleda I have a Clymer manual that would have the info if you want?
@GSBruce5312 жыл бұрын
Your XL600R videos are great, DRay. The production quality and information conveyance is as good or better than instructional videos for other bikes I've paid money for. I'm freshening up my original-owner 1983 XL600R and these are way valuable to me. I'd like to see the electrical system work video. Thanks.
@bklyngeezer4 жыл бұрын
Thanks for the informative video. About to tackle the dual carbs set-up on my 87 Xl250r. Lots of helpful info
@marvinechegoyen14057 жыл бұрын
best informed carburetor job i ever seen my hat off to you sir well informed.should be a teacher
@skjos9612 жыл бұрын
Awsome... I did this job on my 1985 XL250, you make removing the carb look easy. Even with the aix box backed off it is a real pain.
@722mhm2 жыл бұрын
Love these videos…..bought an 87 last year, and I’m learning a ton……Thank you!
@RimjobHimself3 ай бұрын
Thank you. Im gonna do this very soon as the one i had wont allow me to have any throttle only choke. It just drowns with air it sounds like when i give it gas. I was happy the video was just 9 minutes, but im sure its gonna take me a hole day.
@danielpaulson786 Жыл бұрын
D-ray,you do a real good job explaining what your doing very easy to follow.kinda like my uncle...ol uncle d-ray sounds pretty good.thanks uncle d-ray .
@MrJcmoore7 жыл бұрын
Great video...well explained, sufficient lighting, good cam work. I just picked one of these bikes up, and your video really helped.
@Kenny_K23234 жыл бұрын
Same here!! 😁😁
@terrancemccune14243 жыл бұрын
Thanks D-Ray Smith Sir, Exactly what I needed to feel confident about buying a 83 XL 600 R from a local guy sitting in his barn for 30 years 8000 miles looks like new but runs rough . A lot of other videos out there that skip over the steps making them just a show and tell version of face book . I guess their cool but no use to me . God bless .
@ErikISkogen2 жыл бұрын
Everything panned out? :)
@InfernusEternum4 жыл бұрын
Friendly reminder, a set of JIS (Japanese Industrial Standard) screwdrivers will make this job *A LOT* easier. Any screw with a dimple on it IS NOT a phillips, it's JIS.
@DRaysShop11 жыл бұрын
There are 2 studs that are mounted on the seat base near the rear of the seat. They go thru the frame and rear fender. Look under the rear fender toward the front of it, you will see 2 6mm nuts. You will also need to remove the side covers and the strap that goes over the seat. Hope this helps.
@jasonmuirhead79983 жыл бұрын
Awesome d-ray thanks for helping out with our ol honda thumpers.
@jonvalle60989 жыл бұрын
D-Ray, big thanks for the video. I have the same bike D-ray is tuning up in this clip. Here is a tip: Follow D-rays advice on loosening up the air box, on a 1986 it will scoot back about an inch. Fully remove the air box manifold pipe clamps . The air box rubber manifolds are quite flexible and without the clamps on can be wedged fully out of the way. Once they are out of the path of the carburetor follow the exit path D-ray uses in this clip and you will slide her right through.
@boulderblake9 жыл бұрын
Well the 87 version of this bike has an extra bolt under the battery so the box doesn't slide back unless that comes out. unfortunately that bolt broke lose and is spinning and not coming out so I bailed on pulling the carb cuz the rubber manifolds on the intake side of the carbs were separating from the air box and that's not good:)
@bardinkurtis9 жыл бұрын
Having a hell of a time removing the air box but guess I don't need to fully also don't have a canister thing is that bad? Please don't no if d ray will respond
@bardinkurtis9 жыл бұрын
boulderblake dude tell me about it had a fuck of a time getting off the air box guess i didnt fully need to and that bold underneath it with the wierd nut forget about it lol and i also screwed up my intake thing bummer!! Don't have 1 of those canisters he points at is that important
@boulderblake9 жыл бұрын
I got the bolt by the Battery to come off and that provided the amount of room I needed to get the carb off without pulling off the air intake rubber. I cleaned and rejetted the carb and had to seal the rubber air pieces back. All in all it was a pain in the ass because I didnt know there was a third bolt. I looked at the video again and i figured the bolt from D-Rays bike was missing before he got it:)
@bardinkurtis9 жыл бұрын
+boulderblake would you be able to give me any info on were all the hoses go on the carb? the only one I have is from fuel tank to to carb all other hoses are missing do they matter ? there are a lot of little openings on the carbs. any help would be appreciated
@urbanlegend2072 Жыл бұрын
thanks for making this video. you do a great job explaining things. subscribed!
@savyourselffreedom21492 жыл бұрын
Thank mate just got myself a xr 600 83 model will need to do this. Thanks for info
@jbodden69778 жыл бұрын
on the removal of the airbox, three screws on the air box cover, and I found another bolt on the right hand low side holding the airbox as well, making a +1 to your count. That being said you have done the best job so far, other videos presume that saying abracadabra will get the carbs out... but then mine is a 1987
@djbarth110 жыл бұрын
Thanks for your help, I have a 1984 that appears to have carb issues so I'm hoping your video helps me out to go through the carbs! Thanks
@amf439910 жыл бұрын
I learned something new. It seems the 83 duel carbs are different the 86 carbs. I have everything back together and came across this video and thought I would double check my work. In the video I noticed something I don't remember doing which was the "low speed mixture screw". It wasn't even in my manual which covered years from '79-'90. Tore everything back out and discovered that I don't have one. I few more beers and I was ok. Its how you learn. I would love a video on how to install and adj the throttle cables. Its , for some reason , a real bitch for me. haven't gotten it right yet. The carb bowls on the 83 are different also, they are identical. Thanks D-Ray your videos have been a lot of help. 2 years and I almost have it back together.
@michaelross715310 жыл бұрын
For anyone that's reading the comment above, the 1983 model didn't have the low speed mixture screw. Anything later then that did, so don't worry if you haven't got one. You shouldn't if you have the stock Keihin PH60 Carburetor.
@sory4beinanonymous4 жыл бұрын
I have an 83 with a low speed mixture screw. But it’s on the side where the gas goes in instead of on the bottom. I am replacing it with a carb from an 86 though, i’ve heard the design is better
@schlagger50411 жыл бұрын
Big thanks Mr D Ray! Saved me a bundle hauling this thing to the dealer!
@ronwoudenberg229410 жыл бұрын
Great video...now I am not afraid to pull those suckers and give them the attention that is needed. Thanks again!
@cjsgarage36625 жыл бұрын
Great video, i think there's loads to explore when it comes to the right adjustment
@Ticky66MN12 жыл бұрын
That looked like it kicked easily for a 600cc bike. You do a great job recording, editing and explaining in your videos. Thanks DRay!
@Ned94412 жыл бұрын
Great video,very informative and well worth watching as I did this job this afternoon. Just rebuilt my XL600R - hopefully roadtest tomorrow ! Thanks once again.
@55observer3 жыл бұрын
Many thanks. Very helpful and constructive.
@DRaysShop11 жыл бұрын
I havent worked on an '83 in a long time but if I remember right the low speed circut should be on the left carb, the right carb has only a main jet. if so, the mixture screw should be on the left side.
@thenort134 жыл бұрын
Thanks for the detailed description!
@defenestrationize11 жыл бұрын
I just want to say D ray that your videos are fantastic, your instructions are really clear and you really know how to edit. I watched a few of the other videos you made just because they're enjoyable to watch. I have an XR650L now and if you did a video on one of those that'd be very cool there's a few things about the bike that my clymer doesn't in depth enough. I think you could make full videos about tear downs as opposed to books like clymer that'd be the greatest thing since valve springs.
@DRaysShop12 жыл бұрын
Thanks for watchin', yes I do work for th' public, I am about to officially open for buisness soon. Have a goodun'!
@DHandyFamily12 жыл бұрын
Great Video and detail - Sure would like to know if anyone just sells the bowl gaskets as that is the only issue I have on my 87 XL600r.
@sory4beinanonymous4 жыл бұрын
Thanks for the vid!! I just took apart my carbs today. Yours looks soooo clean compared to mine!
@rjohnson93219 жыл бұрын
Great, easy to understand videos. I own the 1986 XL600R and take it to the high altitudes of Colorado. I bought it from a person that had it re-jetted for that area and I would like to see a video on how to change the jets in the carbs for 600 feet altitude. I have done this on some other bikes in the past and would like to know the tricks you can pass on for this bike.
@DRaysShop12 жыл бұрын
The only way to get that little o-ring from Honda is to get a carb gasket set (16010-MG2-305), Suzuki offers that o-ring seperately, (13295-26E00)
@Schmidt4Productions6 жыл бұрын
Really helpful video, thanks a bunch for uploading!
@bitto6512 жыл бұрын
It's runnin pretty good considerin how long it's been sittin and the fact you have only done some basic carb work on it. Well done mate, look forward to the next installment. Cheers n regards
@hommebizzare6 жыл бұрын
Great video, saving it for later... I am thinking about buying this bike, but heard they don't idle too well from factory - i hope this will be the solution
@LawnGardenFun12 жыл бұрын
Awesome work and vid. Very cool carb.
@lefthanddriver10 жыл бұрын
Thanks for help.you are great! Greets from germany!
@Fives-gm2bv Жыл бұрын
great vid
@jbodden69778 жыл бұрын
very nicely done, but a suggestion - especially when showing small parts and 'nooks and crannies' watch out for your hand shadow - good light brings out detail that gets concealed with shadow.
@independenceministorage63718 жыл бұрын
What an awesome video, Thank you!
@AaBb-zj2ld8 жыл бұрын
great vid. i think i may have bowls on the wrong sides as my choke is no good.
@k4rma2burn4 жыл бұрын
Sounds like Kenny Powers is working on this carb
@jeremyodonnell55517 жыл бұрын
where did you buy your rebuild kit because all the ones I can find come with the wrong float bowl gasket, they don't have the circular part.
@toastopia12 жыл бұрын
Hello I love your videos! I have a 85 xl and I need to check my carbs! What's the best solvent to clean the carbs with? Also I notice the carb kits on eBay have so many parts with the kit, should I just change out what you did in your video?
@frankmallory65848 жыл бұрын
THANK you, great run-thru!
@DRaysShop12 жыл бұрын
Wanda says I "live" out there now! lol! Thanks bro.
@DRaysShop12 жыл бұрын
Thanks! more to come.....
@farmboy3011712 жыл бұрын
Good job! I'm surprised you got it running so easily.
@tsauleda6 ай бұрын
Hey, thanks for the explanation! Unfortunately my two carburatos open right at the same time, there gradual opening between first and second one. Do you know if that's a big issue?
@cyrielgaemers8 ай бұрын
Amazing
@jjvwguy248912 жыл бұрын
Nice video your very good of explaining how it work's. My 1987 xr600r wont start without pulling it with somthing.Then somtimes it wont start just hit an when I pull choke cable it die's I have no idea what is wrong I have had it to everyone in WV! An spent countless dollar's everything seems to be right plugs etc. an when it runs It runs great but heaven forbid you turn it off. better have a truck or something to pull it with. Any ideas on what I should try?
@thejalderman5 жыл бұрын
Thank you sir!
@kasperwinding14063 жыл бұрын
Thanks for a great video, where did you buy the rubber gaskets for the bowls?. Can see the new you put in got a ring/circle and the old dont. Cheers
@Tynlinz12 жыл бұрын
Sweet maybe you can put my 400ex in your video for "how to do a top end rebuild" that would be awesome. Talk at ya later
@skarekr0w35 жыл бұрын
I need to ask (4:31) are all the years of the XR600R equipped with this carb? I don't have that mixture screw on my carb. Wondering if it's suppose to have it. It does not look threaded. I've been going over every nut bolt wire and cap trying to figure out why my bike does not run. And if it's missing, how do I get another, and other small parts to the assembly?
@jackmichael96062 жыл бұрын
Hi D-Ray Smith, I bought my 1984 Honda XL600R some years ago and that I have been running the bike without the breather separator and canister. I noticed these 2 items on the diagram of the various Honda XL600R models. Are these items that important for me to consider buying if still available?
@BackcountryHonda Жыл бұрын
So, if I were to lube my throttle cables, I wouldn't need to remove them from my bike?
@thethrobbinggristle10 жыл бұрын
I have a 1985 xl250r and some times when I start the bike or have been going past half throttle the idle speed spikes when I'm sitting stopped with the clutch in or in neutral.
@bardinkurtis9 жыл бұрын
Crank case ventilation canister don't have 1 is that bad?
@Tynlinz12 жыл бұрын
Your vids are awesome. I'm from central arkansas. You work on stuff for the public or just friends and relatives? My 400ex could really use a top end rebuild! Lol I like your thoroughness
@farmerchris568311 жыл бұрын
Hey DRay! Awesome videos. Thanks! Any chance you have a video of how to replace a head gasket for the same bike / an XL 500R? That would be awesome!
@Artwurk11 жыл бұрын
Hey D-Ray, again. Thanks for posting good vids about our thumpers. I just did a carb rehab as you describe here but seem to have too many vacuum tubes. No diagrams anywhere??? I know it's a rookie mistake. Bike has been sitting for years. Can you help?
@SAXONWARLORD1000AD6 жыл бұрын
EXCELLENT VIDEO
@DRaysShop12 жыл бұрын
Naw, it did'nt smoke a bit, I was a lil suprised myself!
@DRaysShop12 жыл бұрын
The bystarter (choke) wont work. Other than that, it will run just fine
@ansdrifter5 жыл бұрын
Thanks for detailed video My xr500r as open throttle its not accelerate as i want its like something clogged. That happened after i overhaulin the carburator. Change seals clean both carbs Any idea whats wrong?? Thank you
@Kroma19869 жыл бұрын
I have a 1987 xl250 dual carburetor, and I believe it's similar to the xl600...I'm not sure how where the hoses go, and where they connect. Is there a video for that somewhere, because I can't find it. Thanks.
@ksmons12 жыл бұрын
Great video. The boots are hard to find, any tips on where to get them, or repair the cracked ones I have?
@LykosLykos11 жыл бұрын
A good work, I'll keep your tutorial in mind since I have one of those bikes (the LM version) and, someday, I should try to clean those carb. Just for curiosity, have you sold the bike or are you using it for fun in the fields? P.s. I appreciate your patience in explaining slowly while filming the procedure, since I'm not very familiar with Arkansas accent: not with any US accent, in fact :)
@boulderblake9 жыл бұрын
Any Idea's why this bike runs like it is vapor locking when it gets hot outside?? It happens bout the time the second carb kicks in?
@ErikISkogen2 жыл бұрын
Im considering buying my friends xr600r 94. Non of us knows anything about bikes/600r, but it has earlier gotten its dekomp system removed, and its now just sitting since my friend cant start it. Should i buy a full dekomp system and put it back original, and where can i get this? I know lawnmotors and 50cc, but this thing and system is above my knowledge right now. Any tips my dear pro’s?
@michal36658 жыл бұрын
I have problem with my xl . If engine is cold i must started engine without choke before engine can t start . If i switch on choke when engine is running engine go off . When engine is hot and i choke switch on engine go to high rpm . sry my English is bad .
@jeramiebeebe755712 жыл бұрын
DRay, great video, wish I had looked this up yesterday before I pulled my carb's off the very same bike. Where can I get one of those fuel mixture screws? I broke mine and cant find an OEM replacement!
@moparmanpete12 жыл бұрын
Ok, thank you
@KFLY6712 жыл бұрын
Hey DRay I was cleaning my carbs and pulled out the smaller low speed mixture screw to clean the tip and it was so old it just snap right off,can i just turn it in closer?
@tmcowner2057 жыл бұрын
Good morning. You video has been very helpful. I just bought my 1986 XL600R and the carbs appear to be different from the ones in your video. I don't have a low mixture screw and i have an orange plastic shroud on one of the pins. The bike runs but sputters so I assumed dirty carbs. I'm trying to purchase a low mixture screw, is it possible it goes by another name?
@erikschouten76411 жыл бұрын
Thank, i found the problem thanks your video
@DRaysShop12 жыл бұрын
Thanks bro!
@osalcedoucmsae4 жыл бұрын
@D-Ray Smith, how exactly did you clean the carb passages and the rest of the carb? Thanks!
@hainlinefamily333610 жыл бұрын
So i have a similar bike. I am all of a sudden having a leak in the carbs with gas. What is the common problem and how would you fix it? I really dont want to pay for it and would rather learn myself! Thanks!
@adriennedemers33348 жыл бұрын
hi d-ray love the video but my carbs are still leaking from the vent tub on the side of the left carb any ideals what that could cause that thanks
@markmathews68766 жыл бұрын
thanks mate
@TyCurrdog0209 жыл бұрын
D-Ray i need some help. i did what you showed on my 86, it only runs on full choke but idles. dies if i let off and dies if i give it throttle. ive been told that the problem is most likely the pilot jet(s). got any ideas? thanks
@natehunt17952 жыл бұрын
Hey man got some questions
@dancecraze58 жыл бұрын
thanks d ray, can you tell me where i can get this exact kit from, I'm in the uk and have problems getting this kind of thing.thanks paul
@l600r33 жыл бұрын
Hello.i have XL 600 1986.settings jet main 0ne carboletor and jet main two carboletor.and jet slow. Adjust
@CarsnStuff6 жыл бұрын
so interesting. Im about to buy one next weekend and im intrigued by the style of this. Do these bikes have decent power ?
@kantorobo77186 жыл бұрын
so how is the bike?
@boulderblake9 жыл бұрын
First off there are 3 bolts on the airbox. One is under the battery. Yours never had one it looks like. Another thing is this was a total bitch getting the carb out. I have an 87 and followed this video and it was hard getting the carb out without tweaking the inflow air rubber thingy. I'll have to seal those again before I put the carb back on. Wish me luck!!
@moparmanpete12 жыл бұрын
Did you replace the rubber washer on the low speed mixture screw and if so where did you find it please. Thanks Pete
@matbrown16011 жыл бұрын
Hey D-Ray. I have the exact same 1986 XL600r bike. The carbs i believe were tuned to my home town. I recently moved over the mountains where the elevation was alot higher. It seems to be okay but the idle is low now. I rode up a fire road that was a aditional 6000 ft. yesterday and the bike stalled and i couldnt start it til i coasted to the bottom. I have never tuned carbs before but i understand how they work. Is it possible to adjust them without taking everything apart? Thanks- Mat
@bikernation1362 жыл бұрын
👏👍
@lucianogarciadefreitas17922 жыл бұрын
Eu quero compra um carburador da moto xl600r e não estou achando pra compra
@jerryfrawley863410 ай бұрын
Choke is stuck . Know any tricks
@johanleroux88366 жыл бұрын
Hi Ray, nice work! where did you find the new carb joint ? thanks
@cjmrizek6 жыл бұрын
I sell a oem style replacement fuel joint for 30 bucks It is a direct fit, does not leak, comes with O rings. it is of much better quality than the one Honda no longer produces. www.ebay.com/itm/1985-1987-Honda-XR600R-XL600R-Fuel-joint/253534641306
@michaelbolt157711 жыл бұрын
D Ray, I am working on a 1986 XL600r. Used this video to help me rebuild the right carb. The left carb is brand new as I had to replace it because the tabs that linked the carb together were broke. Still have a serious problem with the bike hicupping and stalling. Do you have any idea what would cause that? Thanks again for your videos. They have helped me tremendously on this bike.
@edwards0matic Жыл бұрын
Mine does exactly the same Michael, did you ever figure it out?
@NWAdventureRider12 жыл бұрын
If you had the bowls backwards what would it do?
@jaymay13311 жыл бұрын
Humble, I have the same bike and same problem. Did the carb service fix this problem?