1986 Olds Cutlass LS Swapped 6.0 - The Mods

Just going over some of the mods/retrofits of the swapped Cutlass. Any questions, just ask.

[@n5yiz]

Sold the car a few months ago. Sorry to see her go for sure.

[@eddiepatterson5025]

I just found this channel. You built a awesome sleeper car love it. I know you hated to see it go. I had a 86 briefly and wanted to do a sbc swap.but right time for the car but wrong time with no funds to do the swap.

[@midwestcatz5896]

omg.............

[@OscarHernandez-cr6wh]

Will the GN fuel tank work in a 78 malibu

[@Thalifeofaboss]

How much you sell it for?

[@kevindunson8946]

how much did she go for wish I would found something like this the one

[@user-ob7eo7dn6m]

At 16 this was my first car owned and loved. Need to buy a 81😊

[@curtiszzzchicago]

I had a 77 back in the 80s during high school. I miss seeing Cutlass all over. Nice ride. Color is a good one, interior brings back the good old days and looks just fine as is. Get sum

[@pcakes1878]

love how clean and stock it looks

[@gregmoss7975]

I just bought this car I’m in dallas Texas love it , it’s the cleanest g body I’ve seen .. it has a new 6.2 motor with a 200 shot I kept interior identical , true sleeper

[@n5yiz]

That's awesome!

[@Noname23489]

how much did it cost you?

[@candace2308]

We just bought one as a project car, no rust. Can't wait to see the finished work. Nice car!

[@colemanmech]

I've got to say, you've got one of the best detailed ls swap videos I have watched. I hope the guy you sold it to is enjoying it!

[@robertsmith7637]

Excellent summary..super nice installation..and super clean Cutlass...well done..2 thumbs up broski👍👍

[@mostumpy]

Just bought an 85. Nice inspiration.

[@Heat0ne]

Incredible ride there!!! Love the color. Gonna start an 84 GP soon. Thanks for the info, great video!!

[@clarkinthedark1]

Same! Got an 84 GP I’m starting on too.

[@kingacegreen]

Nice ride, thinking bout doing a 5.3 swap on my 87 Cutlass! 😅 very inspiring!!

[@matthewbrown1760]

Nice work, you should feel proud of that!

[@but199018]

Badass Super Clean Cutlass!!!

[@stevepurcell5883]

Damn clean sleeper. The original motor was probably a 150hp 307! Wow I love it.

[@jimcrawford5603]

awesome work , excellent choice !!!!!!

[@curbsidetech]

Awesome video still trying to decide which direction I want go.

[@jakeballard7999]

now thats how they ALL should be done - CLEAN !!!

[@raymondwilson9662]

I bet it’s a blast to drive

[@zackamanda9799]

Nice car !!! I had a 1980 fully loaded. Surprised to see for 1986 that they still made them with roll up windows.

[@lifeofthecaprice6116]

43 seconds in i had to comment great car what a beauty

[@atomicorang]

Love the Cutlass

[@noeltheshemale]

Sick cutlass. Nice paint job. Sounds mean.

[@cariothehero2649]

That mug clean and sound good 🚫🧢

[@nyyankees112276]

Clean and mean ! Nice ride man.

[@miket2607]

Yours is perfect. Mine is so so lol. Around 60% done on mine.

[@classicpontiac37]

Exactly this with a six speed is my literal dream

[@jermaineknowles87]

Texas baby. I love this

[@nicholasmcelhose9195]

Super super clean cutlass u did a very very good job take kare ps i have a 85 monte ss i put 8.5 from a GN in mine

[@focused313]

SUPER CLEAN.

[@pattersonpatrick4799]

I have a 1983 I working on now brother good job on that sir

[@mamacota100]

She's a beauty

[@BuddhaC5]

Amazing work

[@hollowpoint357sw4]

Love the color.

[@antoniobattle2036]

Great job 👍👌👍 love it !!

[@jaredklug3502]

Beautiful car I drove a silver one in high school

[@jp7489]

Beautiful Old's!!👍

[@n5yiz]

Thanks!

[@gbodytoys]

Sounds great.

[@dieselapegarage]

The thing sounds awesome clean as the board of health keep it coming nice ride 👀 🍿

[@n5yiz]

I sold the Olds a couple of years ago...she's long gone.

[@dieselapegarage]

@@n5yiz damn was a nice ride

[@raybrickles7667]

Such a clean car!

[@DYFEA]

love it! sweet car man

[@markjackson1842]

Sounds great

[@lukeallen811]

Well done my friend.

[@ariesboy85]

Nice ass car man! Fort Wayne my home town!!

[@ruwithlee1970]

You have a really cool car, the only thing I would recommend is polyurethane bushings in boxed controlling arms, maybe a front end upgrade and C5 brakes! I miss mine I had a Pontiac 350 t/a engine. 1985 found with destroyed driveline in 1990 for $150 behind old shop covered in dirt and bird crap! They didn't want to touch it! Haha Was mint body after 3 hours of cleaning!

[@mariopaz639]

Sounds good 👌 and looks good!!!

[@jovaanmills2968]

Damn that sound amazing

[@gorillabangerable]

Beautiful Cutlass. I want to keep mines all original but really thinking about swapping the engine now.

[@n5yiz]

Yeah, those 307 engines might be somewhat reliable, but they just have no power at all.

[@gorillabangerable]

@@n5yiz I couldn't of said it better

[@kdboss20]

how much did it sell for

[@acollins9277]

Nice and clean.

[@mamacota100]

Great job buddy

[@calvinwashington1]

This is all I need nothing more!!!

[@GodsMushroom]

Beautiful car. Quick tip: JACK STANDS!! Use them! Had a f150 fall of Jack on my head. Better to havem and not needem than needem and..... die.

[@coleture3]

NICE! I’m swap a Ls1 into my 86 Monte Carlo ss

[@joelakers410]

My favorite

[@donaldmorrell7535]

I love it good job im building an 85 ss el co

[@lataresshawthorne5392]

Nice salute bro

[@jspriver]

Well done

[@seventhfam]

Nice I just got a 77 cutlass supreme tryna learn up on Ls swap

[@mr84ttop34]

Very nice!

[@Mr.Frost181]

Really cool setup you have there buddy I'm looking to doing a 5.3 swap on my 86 Monte Carlo SS

[@trillrifaxegrindor4411]

have about 5 grand spare and an LS engine/Trans complete with accessories and harness

[@Mr.Frost181]

@@trillrifaxegrindor4411 you selling it or that's how much you have in it

[@DONTCALLMETHAT]

Beautiful car man. Wheels look like Buick factory wheels

[@trillrifaxegrindor4411]

magnum 500s,they were on a ton of varied cars,,chryslers included

[@titowilliams9031]

Bad azz buddy 💪🏾💪🏾🔥💨

[@GabrielGonzalez-yf8ui]

nice car man i have a 6.0 on my cutlass supreme too but its not as neat and its a 4 door i just got it

[@adrianjay9268]

Nice shocks

[@ben2687]

Nice ride! Use jackstands though bro!

[@ruwithlee1970]

I would love to find a sweet car like this!!!!

[@ruwithlee1970]

I had one last when I was 21 I built it from a salvage deal blown driveline installed a 1979 T/A Complete driveline and rims and BFG'S

[@jodypierson3137]

Nice car

[@carlosalcaza9973]

What kind of power steering pump and alternator bracket did you use

[@JDP15]

Can you please make a video on how you wired the cruise control.. i have the a psi harness and it comes with the wires to tie into the car cruise control but idk which wires they are.

[@rickyredhookbk9048]

No white letter tires , white wall tires & would have wired hubcaps. Make it look as factory stock as possible. But that’s just me. All great additions you made

[@iamgoat3035]

how did you pick shocks after lowering it 2 inches with a body springs?

[@midos6767]

Wow! That's a like new Cutlass. Did your Cutlass originally have a 307 V8 before you did the engine swap?

[@paulpowell195]

Nice bro

[@jeremyturnbull6299]

One of my favorite cars was my 1988 cutlass supreme classic. So sad I sold it. Mine was the same color

[@chrisbateman9361]

Nice 👍

[@MCRideout]

This is a CLEAN build. Holy smokes. Does anything on this car keep you up at night??

[@demetriuslynch5785]

Beautiful job...what kind of car did you find your LS motor into take out to put in your Cutlass

[@JDP15]

Do you remember what wires under the dash you used to hook cruise control up?

[@thatboifrmtx7316]

Clean build man. So nice. What’s the tire size if you don’t mind me asking. Nice video

[@vinzklortho3013]

What size tires do you have on?

[@BubbaB43]

Mine was that same color inside and out.

[@iamgoat3035]

what longtube headers are those?

[@elcutlass3260]

Can’t believe your selling the cutlass, wish I had the 💰. I just seen it for sale

[@n5yiz]

Come by and make an offer. My price is not firm

[@elcutlass3260]

@@n5yiz I really appreciate it brother, my cash flow is no where near that. Will you be building another LS project in the future?

[@mike198752]

@@n5yiz how much

[@n5yiz]

@@mike198752 It sold already

[@royfernandez3219]

What about the factory wiring for the a/c did you go through all that and just keep what you needed? Because my old engine harness was wrapped in the same harness as the a/c

[@n5yiz]

I never got around to installing the A/C before I sold the car.

[@Bball128]

Can you tell me how you ran the vacuum lines

[@davidreeves2596]

Beautiful car. I have a question about the wheel set up. Are you using spacers on the rear or is that all tire?

[@n5yiz]

I have 1/4" spacers on the rear, but it doesn't need them. I just threw them on there because I thought it looked better with them.

[@fuccillo111]

I have a hemi laying around... Maybe I'll put it in my 84 cutlass

[@pat080886]

Hey man Iknow its been awhile, but do you recall the applucation for the rad fan assembly?

[@theduke672]

I have a 1979 Cadillac Seville with a olds 350 diesel. I want to LS it. What type of motor mounts you used?

[@n5yiz]

I don't remember exactly. If you look through the previous videos, all the info is there.

[@kennethhenley2027]

Hi, what did you do with all the computer and emissions wires from the 307?

[@travisbennett4025]

I'm looking for the same info as this question because I got a 87 cutlass with the 7a 307 (low miles but slow) and I am wondering what I'm going to get into as far as computer emissions and EVERYTHING before I buy this LS with Manuel 6 speed (don't know about the 6 speed yet ) so plz any and all info will be greatfully appreciated

[@trillrifaxegrindor4411]

just dont use them....my trans am was computer and emmisions,it isnt anymore

[@xaviermuniz9808]

Did you use the factory drive shaft with the 4l80??

[@n5yiz]

Had one custom made.

[@FLYEAGLESFL]

Just need some 24s an that beat in the trunk 😂

[@phreaktor]

how did you polish your rockers?

[@n5yiz]

That's how they were when I bought the car.

[@glennmanchester5696]

Something like that I would have just bought a carburetor intake and carburetor for it and avoided all the wiring and fuel system mods tank walbro pump all that put an electric pump out by the original tank used a fuel pressure regulator with return up by the motor and been done w it if I wanted to use the 4l60 e I would have gotten a throttle position sensor for the carb to make it shift or just gotten a 700r4 w the TV cable they work great and have a great low gear and of course overdrive the gas pedal cable would have worked w the carb so no mod there and had the same thing you've got for less money and less work and less hassle just my opinion tho if the car had injection before then of course stay w it but that didn't and I'm not opposed to carbs I am used to them and not afraid to use one I dont plan on driving to Denver or anything so I wont have to worry about adjustment of the carb where injection does it automatically I get that but cost effective I think is the way I would have went on this and got the same results no question in my mind

[@chriswagner7402]

What headers and mufflers did you go with

[@n5yiz]

eBay F-body headers and complete Pypes exhaust. There are better direct-fit header options these days.

[@frankg6180]

Lq4 cast iron I believe, do those fans keep it koo enough, or are u barley getting by. Beautiful setup by the way...

[@n5yiz]

The Dorman fans are more than adequate. The move some serious air.

[@geoffrey6876]

Nice car where did you purchase cold air intake tube

[@n5yiz]

CAI is just a cheap Ebay intake designed for a GM truck. I don't remember what model.

[@darriellhayes9236]

I want to build this car this is a dream

[@onegbodyowner1710]

Which lower radiator hose did you use

[@n5yiz]

I believe it was Gates 20734

[@alreynolds7152]

I would like to do a 1986 cutlass built since I had one of the cars as my first car in the early 1990's...it had the slow but reliable 307 V8.....How many hours of labor would it be to install one of these engines you installed... wondering what it would cost me to have someone do this job....

[@n5yiz]

Honestly, I'm not sure what it would cost. I haven't been to mechanic in 20 years. I was watching a video of a truck with a failed lifter. The guy said that fortunately it didn't cause damage to the camshaft or the bill would have been $6000 dollars! Labor rates must be insane.

[@Roguestatus650]

What shifter linkage did you use bro??

[@n5yiz]

It was a Lokar kit. I believe one of the videos shows/explains it. The kit is basically a stainless rod that you have to bend yourself. It was not easy.