A G Body LS Swap that even you could do! Cammed 6.0L LS & 4L80e Swapped Oldsmobile 442 G Body

[@ruipereira9559]

That's the best looking G body ever made. Ditch the 307 boat Anker replaced with a sweet 6.0 litre. Sweet!!! . Great job and video

[@newking70]

Anchor

[@buildachevy6341]

kzbin.info/www/bejne/qnPVqqamac91pNk Chevy caprice Gbody Short Bed

[@jimmycline4778]

Outt the G body’s, I think the Regal and Cutlass are even, then Montecarlo except for SS I put that below Grand National then Grand Prix!

[@kischillin5539]

I love the factory gauges too

[@timothyvandyke-lc1oi]

Clean build g body has came a long way...can't believe how these frames and body's match.6.0 will make that 305 ..look like a tractor motor

[@zelly1327]

I think it’s so cool that you answered many questions even some of the same ones multiple times !!!!

[@qunicetoole7497]

You did a fine job with the build-up and installation of the 6.0 liter LS it's time to hear /see it run ...There's so many LS engine builds /swaps out there on KZbin, you see the completed engines, but you never see the finish product placed / installed up & running in the vehicle and driven daily, so the viewer can see the final results.

[@Zero2SixtyPerformance]

Thank you. I will keep that in mind for the next video 👍

[@efranrios5460]

@@Zero2SixtyPerformance what engin motor mounts did you use in trying to do it for my 71 buick skylark

[@focused313]

Never? There are thousands of videos with that exact scenario.

[@albertolara735]

​@@Zero2SixtyPerformance.where you located

[@Zero2SixtyPerformance]

St. Petersburg, Fl

[@tywanjackson2320]

That's sweet. My 87 just hit 95,000 original miles everything works on my car. I just got me a 350 turn-key crate engine. I'm a simple guy i still want that original look just a bit more juice on the pedal.

[@totallynotkadince6764]

Where did I pick this up

[@cutlasscrazy6081]

Beautiful car. Thanks for sharin the knowledge and keepin the G bodies rollin. 💪🇺🇸🦅

[@my1vice]

Wow. That's a really good looking Cutlass..... Nicest I've seen in a long long time.

[@loganmills4047]

Really nice. So cool for you to share all your hard work.

[@daniellemariejohnson-kent8323]

Considering an Ls swap on 82 el Camino, thanks for the video!

[@gbodyrush]

Love the Gbody Ls swaps

[@oscarlewisjr.8380]

Great video, please start that thing up so we can hear it next time. Nice Job!

[@Zero2SixtyPerformance]

We just added a start up video! Check it out kzbin.info/www/bejne/aIang3lujb6de80

[@princesharkboi5378]

@@Zero2SixtyPerformance I need a parts List I just got me a cutlass an I really want to do it myself I just need to want ever part I need

[@Zero2SixtyPerformance]

@@princesharkboi5378 shoot me an email, I will put a package together for you. [e-mail]

[@newmantv5668]

I have own and loved the G bodies for over 30 years. I am telling you that is one of the baddest street g bodies I have seen.

[@Zero2SixtyPerformance]

Thank you 👍

[@WhistleTeets85]

Those replica Olds factory rally wheels are super nice, they look really good on the car. 😎

[@Zero2SixtyPerformance]

I think so too!

[@vcalv9354]

I have an 84 cutlass supreme brougham on that I'll be doing the same thing on.

[@MichaelSPalmer]

Great build, David!

[@mr84ttop34]

Thank you for sharing! Soon as I saw the 442 I immediately subscribed! I am wanting to ls swap my 1984 Hurst Olds.

[@Zero2SixtyPerformance]

If you have any questions regarding the swap feel free to ask!

[@mr84ttop34]

@@Zero2SixtyPerformance Thank you I definitely will.

[@my1vice]

Keep the original motor..... They only made 3000? Maybe 3500.... Something like that.

[@TwinGEN22]

Got a 1986 GMC caballero that I would love to do. It still has the stock 305 motor . I know that’s unheard of these days 😮

[@carleynorthcoast1915]

Some lowriders in the 90's had the wheels painted like that, it's a nice look.

[@mr.gunsglore7670]

Idk how old this is but I really like the info u went into and how far u went with it

[@slep_p]

you inspired me to take my 83 delta 88 coupe and ls swap it, awesome work!

[@Zero2SixtyPerformance]

Heck yeh! Thank you! If you need any help feel free to reach out.

[@Zero2SixtyPerformance]

Heck yeh! Thank you! If you need any help feel free to reach out.

[@slep_p]

@@Zero2SixtyPerformance will do! especially if you kit will fill in most of the gaps in a B-Body GM

[@orlandor4866]

I need to hear it start ! Got to hear this beast

[@RONZiLLA702]

Fresh ... Thanks for the informative information.

[@kevinskonieczny7708]

Car is beautiful.

[@mike-yb8vi]

You gotta have the ac hooked up man

[@brandonratliff5125]

Everybody was waiting for you to start it

[@spellyspell8758]

My ls3 swap deff easy with the parts

[@cowill8674]

🤗😳 I have the same year and going the same route👍🏽

[@BUDDAZO]

Great video

[@BigTweez9]

Nice swap

[@TwinGEN22]

Love it !!!

[@Zelaznogsiul-63]

I would love to do that to my 80 trans am, but It is beyond my financial powers. Great video.

[@Zero2SixtyPerformance]

Thank you! Well if you ever decide to take on the project yourself don’t hesitate to ask us for help!

[@Zelaznogsiul-63]

@@Zero2SixtyPerformance thank you, I am not far from you, I can walk to your shop.

[@baldo5097]

Asome video boss I'm looking into doing this swap on my 84 cuttles supreme

[@gearhead1234]

Quite a commercial for Holley… lol

[@LionsTigersBears]

Would sure like to do this or have a cutlass all done. Its amazing... Turn key...

I appreciate you doing this swap want the most simple swap right at the end of my v8 swap in a 1996 jimmy wow what a hard one it was and is .....ill appreciate it more i guess

[@stevenallen6245]

I got an 350 olds in my 84 2 door cutlass I jus put a throttle body on it and I was going ls but I thought about it and changed my mind I lov the power I get out of my olds 350💪🏾💪🏾💪🏾but dont get me wrong I lov those ls swaps my friend ls swapped his 87 chevy monte carlo ss we did it in no time it's super easy I see why everybody does this swap my fathers friend did an ls swap on his 70 c10👍🏾👍🏾

[@colbysmith5266]

clean setup

[@draysgarage8877]

Great info.

[@rparks580]

What are the rims and tire size that you have on this car? They are sick!! Please let me know!

[@themacofalltrades573]

Holly stuff all works but its too high for a shade tree guy like me. Guess ill still be sending cpu off to get tuned and drilling holes and labeling wires until i can afford it😅 great build and beautiful car guys

[@liveandletlive2894]

Same

[@Zero2SixtyPerformance]

Aint nothin' wrong with that guys!

[@jayknight139]

Is it fast ? Drive it.

[@geechieboi17s47]

Would you do a breakdown video on your swaps? Also I would like the parts list on this swap. I’m helping a friend swap his and he just wants something simple that isn’t going to break the bank to much. Thanks in advance

[@Zero2SixtyPerformance]

What all would you like us to break down? Shoot me an email and I can get you a parts list. [e-mail]

[@YerBrwnDogAteMyRabit]

​@@Zero2SixtyPerformance That's seriously awesome of you, I wouldn't have actually expected a response. Fantastic job on this too!

[@cloudlove8120]

I have a 83' Buick regal i want to ls swap so im savin this

[@cloudlove8120]

I just want cheap n reliable ls swap. I mean it came with 100 donkeys. I think 300+ hp should be fun in ole june.

[@disolejunk]

Super clean. I have same intake and tb on s10 swap, did you ever drill or make 1 where that crankcase breather can go through factory 3 bolt tb?

[@Zero2SixtyPerformance]

I have not… I would just get vacuum from another source. Typically I would would a 3/8 bung in the intake tube.

[@ajrichards5121]

Hey, I have a 70 Nova thinking about a swap, I’d like to gather up all the parts first before I dive in my concern in fuel systems what’s needed

[@Zero2SixtyPerformance]

Easy. We can hook you up with everything that’s needed. Shoot me an email. [e-mail]

[@bigblood9748]

Thank you . How much do you charge just labor?

[@Zero2SixtyPerformance]

All cars are different but anywhere from $7-10k

[@MrTay0121]

Nice install. Are you going to make a video of it running and driving?

[@Zero2SixtyPerformance]

Customer picked up the vehicle. We can certainly do a running and driving on the next one!

[@baims8367]

Need to do the jeep Cherokee steering shaft

[@Junior-fd8ux]

Man I need a ls swap in this cutlass 442 I found that’s clean. I could buy a new/newer car or truck and have been looking for so long but I just don’t like anything new… that isn’t 100k$ an up

[@frankmendoza6337]

I like the cold air intake did you make or purchased it

[@Zero2SixtyPerformance]

We fabricated it

[@chimcb1957]

Dope set up

[@Zero2SixtyPerformance]

Could not agree more

[@everythangchevy]

Great video! I'm in the midst of doing a 6.0/4L80E swap on a 79 Chevy Malibu Classic 2 door! Wondering about the trans crossmember? Help?

[@gloriamaletta8667]

I got a crossmember for my 1984 Monte Carlo SS from honest charlies he specializes in g-body parts a long time ago in the late 90s for a 700r4 transmission when the car had a old style 383 smallblock in 2008 the engine was swapped to a LS2 and the header collectors didn't line up with the humps in the crossmember so my mechanic cut it in half and rewelded it back together painted it and installed it its still in the car and have never had a problem with it l don't think Honest Charley sells these anymore but jegs sells one that looks identical for 128 dollars it will need to be cut and rewelded so the collectors line up with the hump on the collectors hope this helps

[@everythangchevy]

Thanks! I appreciate the info

[@jamesmcintire3800]

Would the parts list be similar for a 77 Cutlass? Subscribed I want to see more of this beautiful car!!

[@Zero2SixtyPerformance]

There would be a few items that are the same but you have an A body so it would be a little different

[@kenbelton7169]

Hi I was wondering do you sell turn key motors like this one

[@Zero2SixtyPerformance]

Yes we do. Shoot us an email [e-mail]

[@royfernandez3219]

All I want to know is how you used your factory engine bay wires for the a/c and what goes to what? Lol

[@Zero2SixtyPerformance]

A/c is totally separate from the engine wiring. In most applications you can use the original oil wire as they are a 12v switched wire to turn the Holley on.

[@rafaelsandoval7077]

What did you get that for l80 for from? And can you use a all-wheel drive transmission off a Tahoe or 4l60 for a El Camino? Would it work same thing as a Cutlass? Really nice. Really nice build. I like how clean it came out. That's exactly how I want my car to look

[@Zero2SixtyPerformance]

Rwd 2500 truck. Awd would not work without changing the tail shaft. 4l60 fits in Any g body

[@J-DoGG909]

Great build Im considering LS Swap on my 1980 442 W-30. Where are you located?

[@Zero2SixtyPerformance]

St.Petersburg, FL

[@chrisreed255]

Nice bulid looks like high quality work but whats the Hp to the Rw??? Thats the main thing to all LS swaps or why even do one if yur not trying to make more power thats reliable isn't that the whole reason for a swap lol

[@Tyler-np9ud]

What’s the story on the Wagoneer in the background? Is that a LS swap as well?

[@Zero2SixtyPerformance]

Yes it was a swap. We have a build overview video on our channel, check it out!

[@JayHartMusic]

bro what drive shaft did you use and did you have to cut it?

[@Zero2SixtyPerformance]

A new shaft with a 4l80 yoke.

[@JayHartMusic]

@@Zero2SixtyPerformancethanks my guy 🫡💯

[@ericdaniels9873]

you ever get the parts moist together

[@Zero2SixtyPerformance]

zerotosixtyperformance.com/shop/ls-swap-systems/chevrolet/1978-88-gm-g-body/g-body-ls-swap-kit-part-number-list/

[@sambrooks108]

Hi, im doing an LS swap this winter and was wondering if you could shoot me a parts list. Thanks in advance!

[@Zero2SixtyPerformance]

It’s in the description

[@ESEDOOR]

How much would this be to get mine done I have an 1988 cutlass and this is exactly what I want, great job

[@Zero2SixtyPerformance]

If you were to drop off your vehicle, you would be looking at roughly $18k installed if you wanted a swap just like this. Alternatively, you can purchase all of the items used in this swap right off our website! - zerotosixtyperformance.com/shop/ls-swap-systems/chevrolet/1978-88-gm-g-body/1978-88-gm-g-body-ls-swap-kit/

[@vegoknights284]

I appreciate it so do you sale the package yourself?

[@Zero2SixtyPerformance]

Yes we do. Shoot me an email and we can get you set up. [e-mail]

[@jackperry9369]

Ty sir meeded this

[@johnnyfive3872]

How was the clearance of the passenger side with the heater box. Any issues with having to relocate the coil?

[@Zero2SixtyPerformance]

It fits. It’s tight but you can fit the coil and plug wire

[@mariovargas166]

Nice build! How can i want to Ls swap my Monte Carlo, can i get a list of the parts you used?

[@johnward7970]

Can you do a motor swap from a Z06 into a g body cutlass?

[@Zero2SixtyPerformance]

Sure can!

[@giocalvin1523]

how about the drive shaft? did you make a custom made one or can you use something else?

[@Zero2SixtyPerformance]

We made a new shaft

[@yogie90262]

Clean cutty! I have a 88 MONTE CARLO SS and I have the 6.0 swap but my steering knuckle hits the header looks like you have an extended one is it out of another car? Or do they sell them extended...would appreciate your help!!...thanks

[@Zero2SixtyPerformance]

That is likely due to the mounts and headers you are using. This swap used mounts and headers from Holley. 0 fitment issues. Stock steering components were used

[@haydenderr6728]

Can you share what air intake that is feeding into the tbss? I have the same set up.

[@Zero2SixtyPerformance]

We made it

[@cutlass708]

Did you ever get that part list i would to try this build in my garage myself

[@Zero2SixtyPerformance]

zerotosixtyperformance.com/shop/ls-swap-systems/chevrolet/1978-88-gm-g-body/g-body-ls-swap-kit-part-number-list/

[@Rome3aaro]

Are those swap headers.. or are they got another model car

[@Zero2SixtyPerformance]

They are swap headers from Holley

[@tmangan327]

You were able to use a 4L80E without modifying the shifter or the original trans tunnel?

[@Zero2SixtyPerformance]

Yes and yes

[@AFO1]

Nice job, it looks clean. What's the cost on a swap into a third gen F body?

[@Zero2SixtyPerformance]

Roughly $21k installed

[@easymonee5964]

Nice, whats the idea cost, in im greenwood Mississippi and its hard to find someone to put a 5.3 in my gbody

[@Zero2SixtyPerformance]

Roughly $20k installed

[@easymonee5964]

Is that with me owning all the engine and tran

[@Zero2SixtyPerformance]

We would supply everything

[@downshift215]

The parts list link is no longer available do u still have it and if so can u link it again

[@Zero2SixtyPerformance]

The link works again. We had an issue with the website.

[@ben68442]

thats all fine, does it run?

[@Zero2SixtyPerformance]

Ofcoarse

[@garyshowalter3753]

What are the wheels you have?

[@wrenchracers2083]

Did you use a Holley in tank pump? And if so how did you get the level sensor to work with stock gauges?

[@Zero2SixtyPerformance]

Yea we did. The sender is a 0-90ohm just like the factory

[@mrkingkarolina3175]

Nice video

[@clarkinthedark1]

Did you have to cut the trans tunnel to get the 4L80 to fit in there?

[@Zero2SixtyPerformance]

Do not have to cut the tunnel

[@chriswagner7402]

hi jw what brackets and pulley set up did u guys use thanks

[@Zero2SixtyPerformance]

Holley hi mount

[@chriswagner7402]

@@Zero2SixtyPerformance thanks

[@joeydiluccia788]

Absolutely one of the best videos I've seen on this thanks man do have a few questions is there a way to speak you over the phone for 5 to 10 minutes let me know thank you

[@Zero2SixtyPerformance]

727-346-8919

[@luisurrutia7344]

@@Zero2SixtyPerformance hi how many kind of converters do you have on that car ??? Because I have a 84 Buick regal and I'm doing the same thing on it I'm putting a LS1 motor..

[@Zero2SixtyPerformance]

Catalytic converters? None.

[@juanmacias7360]

Can you send me the part numbers for all of the parts you used

[@chriswagner7402]

so I m looking for the right kit do you remember how much the holley high mount kit cost so I m finding the right kit thanks

[@Zero2SixtyPerformance]

Roughly $1400

[@swampbass6494]

I am doing a swap on a 83 Monty G-BODY! We’re did you get your motor mounts from?

[@Zero2SixtyPerformance]

Holley

[@micquealbrooks9914]

Cool like that

[@amandamitchelfrye1603]

I'm wanting to do the same thing to my 82 el camino.

[@Zero2SixtyPerformance]

I personally own a 82 el camino.. I say go for it!

[@Vr30Boostlyfe]

Would've been nice to hear it, but great video.. Thx

[@cliveharman7237]

Great build and swap.the swap would vastly improve performance and gas mileage over the old 307,305 Chevy small blocks of the 80s era. One question what battery are you using once the swap went in? Also what axel you using?

[@Zero2SixtyPerformance]

I belive that car had an optima red top in it. Rear end was the stock 442 unit.

[@tremainmarks6130]

@@Zero2SixtyPerformance how much u charge to do the swap

[@zayturner5075]

Did y'all go with rewiring the engine harnesses and connectors yourselves or go with a company that makes ls swap to gbody wire harnesses?

[@Zero2SixtyPerformance]

We do all the wiring in house

[@zayturner5075]

@@Zero2SixtyPerformance ahhhh i see. I heard it can be a hassle doing yourself due to figuring out which connectors you need/dont need. I also heard third party companies make harnesses that are already ready and just plug and play.

[@AdamMorton-u2h]

Doing frame off 85 monte ss t-top 6.0 lq4 comp 54-469-11 trickflow beehive springs pushrods trunions Johnson lifters. 4l85 fully rebuilt shift kit circle D 258 torque converter. Planning using holley engine management as well. Do you have a part number on that adapter for speedo want use factory gauges as well already have oil water volt hooked up need speedo tach eventually slow process due to financial reasons but getting there

[@Zero2SixtyPerformance]

ECD-200BT-2

[@SWT602]

Are those stock rims because I know they sell aftermarket ones that are 17 inch and 18 inch and look the same

[@steveg4232]

17" aftermarket

[@shredfest30]

look like year one 17's

[@youdig3691]

I want that swap and seriously, what's the purchase for the complete install, with and without the engine and trans

[@Zero2SixtyPerformance]

If you were to replicate this swap it would be $18-19k installed

[@Zero2SixtyPerformance]

If you were to replicate this swap it would be $18-19k installed

[@joelortiztorres6895]

Will the set up work on a 78 Malibu ?

[@Zero2SixtyPerformance]

Yes

[@marcusjd21]

You got one of theses kits for 72 cutlass ??

[@Zero2SixtyPerformance]

Sure do!

[@josegonzalez8907]

What’s up buddy I like the way you did that LS swap I’m doing one on my 86 Regal where can I get a radiator like that and is it 3 or 2 row?

[@Zero2SixtyPerformance]

2 row. We can send you one. Shoot me an email [e-mail]

[@michaelracut7682]

Can you make the factory tach work too?

[@Zero2SixtyPerformance]

Yes you can

[@michaelracut7682]

Is there any videos I can watch the show how to hook it up?

[@kingartsprojects4150]

What harness did you use? Thanks!

[@Zero2SixtyPerformance]

Holley terminator x