1988 Suzuki samurai tintop

[@StricklandDaniel]

Nice build! I went with a 4:90.1 gear in the transfer case and lovin’ it with 31x10.50’s and a shackle reversal that made it drive like dream. Love them Sammy’s!

[@MrJet1982]

Yes sir ! I love them as well. I have 2 tin tops. One with original paint and basically rust free. Check it out on my channel

[@ienjoyegg5694]

Damn bro that’s a nice setup you got there

[@octaneartllc]

Very nice brother! I got an 87 tin top cant wait to finish her up!

[@Maxtowers71]

damn, i fell in love with this as soon as i heard harley davidson carburetor...

[@MrJet1982]

Yep , screaming eagle 😁 Thanks 👍

[@execprotect6147]

Just picked up an 87 ton top, all factory. Plan on daily driving it so my mods won't be near what you have. Probably just a 3" lift and larger tires. You Zuk looks fantastic!

[@MrJet1982]

Execprotect Thanks ! I also have an 87 that I daily about 4 days a week.. I have a video of it on my channel also. Check it out

[@robsylvia6546]

That is an awesome set up. nice work.

[@MrJet1982]

Rob Sylvia Tha k you sir ! more to come soon

[@hectoracuna4111]

Bonito tu jeep bro y ese motor

[@JWBrier-jn5fr]

Hell yeah that's bad ass

[@oxyrisin]

That thing is bad ass af

[@allanwagner4570]

thats a REALLY nice rig!!!!

[@ericprice6679]

Harley carb ? Wow , Never would of thought ! What made you try that ? Easier to service , etc ??

[@MrJet1982]

It has been used by many others before me, there are lots out there you can buy that's are bolt on. These cards are very tunable and can achieve great performance in high performance applications. Zuksoffroad has them

[@vwagon5566]

@@MrJet1982 Thanks for info

[@MrJet1982]

@@vwagon5566 No problem man. I cant remeber what you asked me before...lol. I try to reply to all comments ,but I do get sidetracked sometimes...😂

[@jeepsalt]

That samurai is awesome

[@mark_osborne]

Very nice tin top ! I drive a Samurai daily- for 13 years

[@davidregan9872]

Mark, my friends timing belt jumped, and was told not to use the tensioning spring again. After lining up everything up, and put it back together it won't start up. Any thoughts on what could be the problem? Thanks for any help!

[@vwagon5566]

@@davidregan9872 Hey David, tell you bud the marks have to be dead, dead straight Check teeth on all gears, all have to be almost perfect to time properly, check points condenser, wires, cap,rotor, coil,everything electrical. Probably to late through. Hopefully it's running, there way to nice to just sit. Out.....

[@oldschoolmotorsports9990]

Im jealous, this si super nice. !!!!!!!!!!

[@MrJet1982]

Old School MotorSports Thanks !!

[@jessysiko4318]

what kind of deffs you have ?? nice video btw !

[@MrJet1982]

Its was stock samurai in this video . Had a mini spool in the rear. Not it's on welded Toyota axles . Check out the other videos of it on my channel

[@wontonmin6481]

Beautiful

[@MrJet1982]

Peter Kinzio Thank you. I've done a bit of work since this video . Once I do the 4 link and yota axle , I'll do another video

[@davesilvia9711]

looking good, still lots of work to do! I'm in VA and been driving zuks since 98, had 12 over the years, gotta say those boggers wore out my rig,lots of noise and vibration best looking and best traction! where did you find that sidewinder kit? that looks sweet! enjoy!

[@camposvazquez]

I have an 87 hardtop.. Still stock. Do you happen to have any skid plates for sale?

[@coachkenthemanghihilot]

Badass. Cant wait to fix mine up. Just got a 1988 jimny. Needs lots of work. Where do you buy parts. I am in the Philippines. I will have to order online

[@MrJet1982]

What kinda of parts do you need ?

[@osahinmartinez3371]

You added power steering?

[@carolinahernandez-bu1in]

Estos son modificados o son así, es que en una piedra alta se pega y ahí si que mal una reparación

[@nirhaber6149]

Inches of lift?

[@suzukisamurai9362]

Damn she's a beauty

[@MrJet1982]

suzuki zuk Thanks 🤘👍

[@suzukisamurai9362]

JBS BLADEWORKS can I ask you what springs are dose?

[@MrJet1982]

suzuki zuk Sure , they are Old man emu 2.5" lift springs in the Spoa configuration..

[@suzukisamurai9362]

JBS BLADEWORKS thank you. I toaght so but I'm trying to get them and no one ships to Europe or if they do it's very expensive on tax do you recommend any website's ?

[@MrJet1982]

suzuki zuk Not right off the top of my head. what size tire are you trying to run ? are you on Facebook ?

[@mi5veezee]

Good job its really cool. Your very smart guy. Praise Jesus for your smartness. I hope you pass them onto your family especially your children.

[@jeffwilliams5619]

Clean Zuk man. How'd you do the power steering? I have an 86 & would love to do that upgrade!

[@MrJet1982]

Thanks man ! Message me and we can talk about it

[@garymichaud4409]

@@MrJet1982 I Have an 88 tin top I put electric power steering on mine. Its a nice set up and doesnt rob power like regular power steering

[@SaSaUrmULi1]

🔥🔥🔥

[@rick-nr5zr]

Clean engine

[@Speedtrackcross]

TeamSuzuki

[@kouassikouame4299]

J'aime la Suzuk i samuraï. Comment passer la commande? Et quelle est le prix actuellement?

[@Mahalo_83]

It’s so cute

[@767dag]

I love it

[@MrJet1982]

dave g Thank you 👍

[@blentong4wd810]

Bagus dibikin ky gitu

[@isaac3175]

Sweet ride bud, I've got a 92 sammy

[@micklaporta4503]

nice tintop man what cam are you running

[@MrJet1982]

Thanks man , its a 260 tourqer

[@rodreel7136]

just subbed to your channel. that's a nice tin top you have. I like the set up, and I think you said you have Toyota axles in it now. I have a couple of samurai's myself. { had 4 at one time but sold 2}. I use a 2.3 ford in mine. not partial to the ford brand, but I use them because they are still light weight and you can get pretty good horse power from them. they make a lot of after market parts for the 2.3 because they ran them at the circle tracks a lot. I also live in florida just above ft myers. your project is lookin good, keep up the good work. do we ever get satisfied with the build? always one more up grade to make, or one more change, good luck and be safe. where do you wheel it at?

[@Ghosts_and_Cars]

Any more info on the 2.3 swap?

[@PigMine7]

This is a bad ass Zuk, the only apparent issue is the body is rather beat up

[@MrJet1982]

PigMine 7 Thanks , and this body is actually nice compared to most tintops. it has some small dents and rust , but it's really solid. nothing that can't be fixed

[@Enigma00017]

That is one bad ass Zuk. How do you like that carb?

[@MrJet1982]

Enigma00017 I like it so far ! still trying dail in the jets .. but all in all its nice. responds very well

[@alaskanadventures1164]

Man i have one with all the eng. mods like u but it has toy axles. My bone stock one fits where the toy axles cant. I never woulda thought.. Amazing difference. Toyota axles are stronger & look way cooler, but sami axles make them an affordable reliable side-by-side w/up to 31s in my opinion.

[@MrJet1982]

I have this one on Toyota axles now. I have a more stock one on 31's. Check it out , it's on my channel

[@jimmypopp2695]

This is awesome brother. Do you still own this??

[@MrJet1982]

Yes I do. Its alot bogger now..lol. it has toyota axles ,4 link suspension and 39.5 boggers

[@vwagon5566]

@@MrJet1982 Hey dude, lovn ur Zukki. Beautifully done, in great design. U got good eye. Keep it simple and super clean with bump'n sounds..🤙👍👍

[@TrompieTrompie]

Fucking beautiful

[@MrJet1982]

Kicking&Screaming Thanks 🤘🤘

[@gilbertrocha3589]

I like it

[@muhamad_adham8886]

Mr.itu velg ring berapa dan ban ban ukuran berapa.tanks

[@wahyuyudhayudha5940]

👍👍👍

[@jonsnarr9953]

How much. Im in ft myers .Really interested

[@MrJet1982]

Jon Snarr Sorry man , she's not for sale .. I'm in Haines city so not too far from you. Might see me around an event or something 😁

[@jonsnarr9953]

Let me know if you change your mind

[@jonsnarr9953]

Did you buy that 61/2 to 1 transfer case. Or did you build it

[@MrJet1982]

Jon Snarr are you on Facebook ?

[@MrJet1982]

Jon Snarr I built it from the kit I got from Trail gear. the gears alone are over 500 and the rebuild kit is another 100 plus the HD output shaft is about 130. then wrap it in the snatch case that's another 230..lol

[@R4499-c1g]

Can u share more pic of wheels brother

[@MrJet1982]

Ricky Bamon Send me your email and I'll send you some

[@R4499-c1g]

[e-mail]

[@roadservicenewjersey]

Can u share me more pic of wheels as well please @[e-mail]

[@MrJet1982]

Pablo Teran if you want to see more pics of my Zuk go check out my Instagram page @ jbsbladeworks

[@hoagiesherlin7732]

Kool sammy man

[@quentinhargrave4707]

What's up nice rig bro

[@MrJet1982]

Quentin Hargrave thanks ! I need to do an update video soon. I've done a few more things. about to do a 1.6 8v upgrade and go yota axles and links soon

[@จารย์หนุ่ย]

woww

[@dastinhofman2244]

👍👍👍🔥

[@davidregan9872]

Very nice! My buddies 88 that just jumped the timing. The spring popped off, and was told to not use it. He put a new belt on it, and lined up the timing marks. It still will not start. Any thoughts on what could be wrong? Please help! Thanks!

[@MrJet1982]

David Regan Pull the distributor and then line up the marks both at 12 0clock. then drop the distributor back in with the rotor pointing at post #4. you will have to take the cap off to see, but it should be right about where the wires come out. try that and let me know

[@davidregan9872]

OK It runs now! Thank you, but the ignition beeps when it runs, and won't shut off. What would that be? My buddy is so happy he wants to kiss me! LOL He's been walking for over a week now!

[@MrJet1982]

David Regan I'd say maybe take out the ignition and clean it and all the contacts and such. try that and go from there

[@christinahyde7240]

I think it was the door buzzers. He's been driving it, so I think he fixed it. Thank you a ton! Now will you come here to WA state and help me fix some spun crank bearings on my 85 Toyota 4X4 strait axel ? LOL

[@Leah99999]

I have the same one all most

[@MrJet1982]

Chris Leist cool , where are you at ?

[@FINCRUDA007]

Is that a suzuki Beaver?

[@MrKillerRC]

Nice.

[@MrJet1982]

Kent Keller thank you!

[@sebysebastian7578]

Engine? :D

[@MrJet1982]

It was a 1.3 8v. Now it has a 1.6 8v

[@sebysebastian7578]

@@MrJet1982 Uuu, nice... I would've gone straight for the 1.6 16v, honestly

[@MrJet1982]

@@sebysebastian7578 I have a 16v swap I'm putting in my other tintop. Check out my other video of it. I .at do another video of how this silver one looks now. It's a totally different animal .

[@yusuftauziri5824]

Aw mantap

[@patriciapascual1878]

😍😍😍😍🥰🥰🥰

[@Shiddyvet]

What yj kit is that?

[@MrJet1982]

Tim Tim Its the Dr.Z fabrication yj kit .. Its nice !!

[@mudlightracing9186]

Nice truck but at least put a small block in it

[@robhudson5694]

You shoulda went out to rancho sunday we had a good time

[@MrJet1982]

Rob hudson Dude ! I saw that.. I was putting my engine together 😕 I hope to have it in soon

[@davidgreene1964]

Go on with your bad self!

[@SandraGonzalez-ub4mj]

Hermoso

[@rxdxmptixnx338]

his lil buddy

[@MrJet1982]

JURRELL2846 Haha , yep .. my lil buddy. It's a bobcat skull

[@sadikiabdul2639]

Happy

[@erlanggasyahru6157]

harga mobil jimi

[@markJohnson-ot7ny]

Yo its nice but the Samurai know it tip over and with those huge tires I would hit a corner over 20 mph. M

[@TURKEYMAN60185]

You dumb

[@langa1818]

pick your feet up bro!

[@ballisttic]

yours is almost as nice as mine but not as big lololol

[@MrJet1982]

Robbie Bobbie 😂 I'm working on that here soon

[@geller3365]

ez az igazi szekér nem a porsche meg az ilyen szutykok

[@geller3365]

beszól megfogod azt átmész rajta XD

[@MrJet1982]

Sorry , I dont understand your comment...haha

[@حمدحمد-ز9ع]

حمد

[@johneratcliff]

Change that alternator out. Kit $125. Low Range Offroad. You can't run lights with that alternator in there....just and idea. My 87 runs so much better with more amps.

[@sagitariuswolf7793]

CUMPAR MOTOR BENZIN TURBO LADER SUZUKI SAMURAI SJ 413 BAUJAR 1990 BIS 1999 DANKE

[@erlanggasyahru6157]

m

[@RCartagena1]

👍🔥🔥🔥

[@حمدحمد-ز9ع]

حمد