1990 chevy c1500 obs silverado (drag strip)

[@WilloW0024]

Nice set up! Fitment is on point. What are your wheels and tires specs?

[@scottydoesntknow254]

Damn you almost got beat by a flat bed lol

[@arturoochoa8]

Bro 🤣😬 i was worried....i need to do some adjustments cuz shes running rough

[@NolimitTEXAS]

That truck is legit af!

[@arturoochoa8]

Zack Sanchez thanks bro appreciate it

[@raulsoto9735]

What size of tire do you have on your truck

[@arturoochoa8]

In the video i had 245/60/15 in the front and rear was 275/60/15

[@BuySellTrade-g7i]

I’m sorry a 15 is very disappointing considering all the money you put into the engine

[@arturoochoa8]

I agree bro...thats why i leraned my lesson...i been working on a ls2 for the longest time lol

[@BuySellTrade-g7i]

You still haven’t finished? I was just binging on your video and realized you haven’t made one in a while what happened?

[@arturoochoa8]

🙄 i know bro life sometimes is complicated...so i had to pause almost finished it

[@sheldonwhite1010]

what size motor you have in the truck and what have you done to it i have a truck like yours just trying to get a little info so i know what to look for with mine

[@arturoochoa8]

Alright..i have a 5.7L crate goodwrench 350 with jba shorties, edelbrock plus cam,edelbrock intake manifold ,k&n intake, trick flowheads..all of it is ca carb so not a huge difference but you can feel it

[@sheldonwhite1010]

Cali209 Thanks for all the information I will let you know what I run my truck looks alot like yours

[@arturoochoa8]

Nice bro cool👍🏼

[@giovannii1944]

What size camshaft are you running?

[@arturoochoa8]

Edelbrock 3702 plus cam...i would built the truck straight non ca carb legal ..too much money little power difference

[@alexvargas5424]

What rear end does it have and where u get that net

[@arturoochoa8]

I have original gears but with Yukon gear diff limited slip posi and i got the net on Amazon

[@josephhurtado880]

What kind of chip do u think you’ll go with?

[@arturoochoa8]

I havent got one yet..i saw theres a website where you let them know what you have done to it and you get one specifically for your vehicle

[@LuisHernandez-fm9pb]

Any mods i can put on a 350 motor ? I got a 91

[@arturoochoa8]

Yea id say a nice cam will do the trick...im in ca...so i have everything street legal so its not all big power little difference only...i got the heads, cam, shorty headers, intake manifold, intake, and throttle body spacer ..i need the chip tho still

[@derekdill14]

Where can I get a set of wheels like those ?

[@arturoochoa8]

Summit racing and not expensive

[@derekdill14]

I have a 91 shortbed with the drop, I need a good set of stocks like those black ones u have. Can u give me the info on em, link or part # and tire size. Thx bro

[@arturoochoa8]

Late reply lol..I bought them off Craigslist list tho..but they are rock crawls i believe z52series

[@la.350.negra.6]

It has a 5.7 ? 350

[@arturoochoa8]

Yes sir

[@josephhurtado880]

Did u have to have ur computer flashed or anything since ur still running tbi?

[@arturoochoa8]

No i want to get it chipped with all the stuff i have added on it

[@TimNova-mj9bu]

Is yours a long box? Might be getting one after my dad is done stripping out the stuff he wants from the inside. The motor is bad though

[@arturoochoa8]

Iits a short bed bro

[@ToneArias113]

Hey brotha I got a 1995 c1500 with a 4/6 drop sitting on stock 15's rims. I want to move up in size to 17x9 in the back and 17x8 in the front, but not sure if it will rub? Nice truck by the way.

[@arturoochoa8]

Never saw this message. But it shouldnt thanks tho

[@007dws62]

Move to Texas! Nice truck!

[@arturoochoa8]

david stover right...thanks broo

[@josephhurtado880]

Cause I have a 89 Chevy and it has been bored cammed with headers and 3” magnaflow all they way back and also edelbrock tbi intake with k&n air intake and was thinking of chipping mine too but?

[@arturoochoa8]

Nice set up similar to mine basically the same ...um yea i havent choosen one yet

[@joshuaavila3609]

I'm redoing my whole suspensions I ordered my 4/6 drop and the whole suspensions components for the front

[@arturoochoa8]

Joshua avila nice nice man i bet its going to look real good

[@joshuaavila3609]

ive been looking into it after i bought the djm kit spindles and springs and i noticed one youtube video said ill need to cut the lower control arms so i cont rub on the rim so i was wondering the kit you used ?

[@arturoochoa8]

Joshua avila i used the beltech 5/7 cnotch kit ...i didnt need to do that to mine

[@joshuaavila3609]

Cali209 honestly I'm waiting anxiously for you to upload as you can tell I'm a fan lol mainly because we have the same color truck and yours is everything I wish mine was. Also my 4/6 will be finished this weekend I on my did my 6 inch in the back

[@joshuaavila3609]

Cali209 also my dad gave me some 17x9 17x10 so I spent more money on tires I wanted to keep 15s but my drop kit will rub

[@deionjohnson7726]

U got a sick ass truck 💯 dope content, would u know what would cause blue exhaust smoke on start up ? I got a obs too

[@arturoochoa8]

Mac pcv valve,valve seals i believe ....thanks bro i appreciate it

[@michaelvoigt724]

Might be rings, high mileage motor?

[@207garage3]

Love the truck man

[@arturoochoa8]

Thanks man

[@cesarlopez6090]

Clean assss truck bro , whats the exhaust setup ?

[@arturoochoa8]

Top end is done basically...Jba shorties trickflow heads borla atak cratemuffler with stock y pipe and cats

[@cromedome2617]

hey man where are you from? I assume between mariposa and lodi

[@arturoochoa8]

Yea lodi

[@cromedome2617]

Cali209 no shit? bro let's meet up I'm in modesto

[@arturoochoa8]

Yea bro me and the club go out when ondiados has something going out

[@cromedome2617]

Cali209 you have Instagram?

[@arturoochoa8]

Not yet bro il be making one soon

[@iamdavidcastillo347]

What’s up bro let’s link up I’m in the 209 too🤔

[@arturoochoa8]

David Castillo that would be cool..i see your truck here and there..looks badass bro

[@iamdavidcastillo347]

Just let me know bro ! Thank you 🙏🏼 !! Yours is clean as fuck! My ig is @iamdavidcastillo dm me or something bro we could link up !

[@tylerleighton436]

Yup hit me to I’m in lodi I got an identical truck but extended cab

[@arturoochoa8]

Hell yea bro when ever my club im in has a meet fosure

[@tylerleighton436]

Yup I work at oreilleys in stockton off Wilson

[@tylerstowe8040]

Hey man, nice truck! Was wondering what all you have done different that isnt stock? I have a same year stock truck and I'm looking to pour bit of money in to it to have some fun

[@arturoochoa8]

Ok cool.. thanks.....lets see...i have jba headers,trickflow heads,edelbrock cam plus,edelbrock intake manifold,k&n intake,throttle body spacer,borla atakk crate muffler, and its all new on a new crate goodwrench 350

[@Josemgt6]

What did it cost to do the engine setup

[@arturoochoa8]

It cost me 3700.. expensive i didnt realize that much was going to be spent but sadly it did...i could of bought a built crate 350 high output engine from summit ..all set to slap in the truck made 420hp and like 400tq but i wanted it street legal so i can drive it around town... ended up buying the parts and it totaled to 3700 around

[@juan_castilliojc]

Hey bro I hope that truck can go speed and super fast that truck probably you should get ls engine because ls engine are pretty bad ass and faster bro 💨💨🏁🏁🏁👌👌👌

[@arturoochoa8]

Juan Castillo Houseoftruckclub i know bro i regret it but didnt have the extra cash to get it done or else i probably would of...on the next project later on maybe

[@Monglomon]

that truck is slow as fuck bro, even mine goes faster and its been overheated twice and has all the fucking tailgate weight, get your shit together with that piece of shit

[@arturoochoa8]

Who said it was fast? Hmm 🤔 🤣 its all looks😁

[@Monglomon]

@@arturoochoa8 looks don't win races though and you're racing people lol

[@arturoochoa8]

@@Monglomon that was for fun buddy..now i am building it to race,once its done you can comment and let me know how it is...p.s. not building the fastest i dont want you to get to carried away in your comments ..just more like im building the engine for 500hp plus then from there maybe to 600hp after a yr or 2