1991 Mitsubishi Delica L300 - Rear Delica Logo Light

The Rear Delica Logo shines bright!
Part Numbers:
Below is a link to the Amazon page for the LEDs. As shown in the video, I had to trim down the LED housing so that the LED did not extend past the light socket. If anyone has the link to a better set of LEDs or a better technique please post in the comments!
LEDs - www.amazon.com...
The below thread helped me out a ton with this project.
delicaforum.co...
Forums for more information, they've helped me out a ton!:
delicaforum.com/
delica.ca/
www.mdocuk.co.u...
www.delicaclub....
To repeat the FYI in the video, due to some work coming up, I won't be posting for 3-4 months. However, I will be back afterwards ready to go. Also, let me know if you are interested in non-delica van videos. I have (2) 1970's Dodge B200 vans that need some love and I will be working on them soon.
Thanks again for watching! Don't forget to subscribe! Don't hesitate to ask any questions! More videos to come!

[@galtbarber2640]

Thanks so much for the video. I tried it and got it to work successfully on mine. I got the 23mm long LEDs, in blue color. I had to use a 3/8" drilll on the plastic base so the LED could fit properly into it. Then I removed the little plastic lens that comes on top of the LED so that I would not have to grind the base, which takes more patience and tools than I have. It worked well and looks nice. It is more purple than blue, but I like the look. Yay! I have a Delica logo!

[@vanderbosch478]

Damn! I was too nervous to remove the lens parts because I didn't want to destroy the LED. That sounds like a better way of doing it!

[@sebastiancardenas9282]

I just bought a delica and this is so helpful, thanks !!!!

[@4g63_Everything]

I like your Taiwan 2000s spec Red/white tail lamps👌🏼👌🏼😍😍

[@vanderbosch478]

I didn't even know! I haven't changed those!

[@johnkelley7543]

Sadly that LED product is no longer available for purchase, but I think I can figure something else out. Thanks for this video.

[@ratboyjersey]

Thanks for the videos! Please consider EGR delete video

[@neildrd]

Was the original bulb actually replaceable or was it kinda potted/glued into (part of) the housing with all that white stuff you dug it out of? I couldn't tell exactly but @11:11 where you pushed it out it kinda looks like one of those wedge base (194 or W5W?) type bulbs like you find illuminating dashboards etc. Thanks very much for posting this up here. Very informative. Will be tackling fixing my currently illumated "ICA" one of these days. BTW I'd suggest maybe carefully sticking the red hose on a wd40 can between the panel and door and carefully spraying each plastic clip with a *very, very small* amount to help them pop out of the door (very small amount so as not to turn the cardboard to pulp).

[@olavista1977]

More delica please

[@braymacck5883]

Hey man! Just stumbled across your channel and absolutely love every video you've done. Do you have any plans of making more in the future? I've just started to re-do my 93 delica after leaving it for the better part of a year so lots of TLC is needed and your vids get me inspired.. cheers!

[@vanderbosch478]

Hey Bray! I hope so! I have been really busy with work... Hopefully I will be back making videos sometime in the future!

[@cyberflaneur9127]

Mine still work , but those leds look way brighter

[@galtbarber2640]

Thanks very much for the helpful video. Did you order the 18mm or 23mm lights? Were they white, yellow, green or blue?

[@vanderbosch478]

I got the 18mm, link for the LEDs are in the description!

[@milioinufk8274]

I need the reference number of this logo part…in europe there there are not this!😩😩

[@akosipepot1637]

Please make more videos

[@vanderbosch478]

I apologize! I have been pretty busy with work and life! Hope to get back to it soon!

[@manfree6543]

So were the led light you bought green or the letters on the delica are already green and just need a white light to shine through?

[@vanderbosch478]

The LED's were white! The logo has the greenish blue tint

[@GTMANTONIO]

Where can we buy surplus its brocken

[@genarchdesign]

Could you please share your online shop, where to buy delica part, Thanks

[@vanderbosch478]

I have included the amazon link where I purchased the LEDs in the description. Let me know if you need a different part number or link.

[@genarchdesign]

VanderBosch do you have other online shops that has delica parts to buy?

[@vanderbosch478]

@@genarchdesign Sorry I misunderstood your previous comment. I use MegaZip.net to get my partnumbers. I then use amayama.com to order the parts. I have also used some canada based stores such as ccautos.ca. For discontinued parts I usually resort to ordering used parts from ebay. If you need anymore information let me know!

[@genarchdesign]

VanderBosch thank you so much for sharing informations,. God bless bro.

[@frankearth9786]

hello ! where did you get the sticker?

[@vanderbosch478]

Hey Cole! If you're talking about the 65MPH, I got the sticker at 4x4ward!

[@frankearth9786]

@@vanderbosch478 I meant the decals (chamonix) .

[@vanderbosch478]

@@frankearth9786 I believe the decals came on the Delica from the factory. The Chamonix models were more winter focused with thicker carpets/insulation and dual batteries. They even had bigger alternators! You can find the Mitsubishi part numbers for the decals through megazip, however, I don't know if they are still available. I've taken pictures/measurements of mine since they are starting to fade just in case I need to get them made in the future.

[@frankearth9786]

@@vanderbosch478 understand! Thank you so much for replying my question. Your videos are awesome. I’ll share your video to my delica friends 😍