1994 GSXR 750 First Start after rebuild.

Wiseco 1mm over piston kit, Yoshimura Stage 2 cams

[@woooster17]

Running nicely..the flat slides carbs sounding sweet..

[@michaelivy90]

spicey build brother

[@megadethdan]

superb machine

[@BrUnO18150]

no words

[@suzukibandit400V]

Soooo sweet, well done! Wish I could get myself a front end like that one for my B400 ^_^

[@metlhdmensch1007]

SWEET running mill ! Need to get yourself one of those NEW Yosh Exhust systems to go with those Dymags ;)

[@StanleysGarage369]

I have a NOS full Titanium system as a back up. Is Yosh producing new systems for these old bikes? Hindle will for these and oilers, so I’m told.

[@metlhdmensch1007]

@@StanleysGarage369 i know they make new systems for the Slabby 1100. Would guess it may fit the W?

[@Edward3DFX]

Love the sound

[@Mr2005BUSA]

Nice. I have a 94 gsxr 750 also. The only year with blue anodized forks.

[@StanleysGarage369]

Please join our FB page for 3rd Generation GSXR. Click the FB icon on my header for a link. One is for Bandit 400, the other for 3rd gen gsxr.

[@MHLivestreams]

andt the swinging arm is from a 95 in my opinion.

[@H-M-78]

Sounds great! Smooth. New subscriber here.

[@StanleysGarage369]

109 with lean main jet and pump gas. Torque was greatly improved, but can't remember the number.

[@Roostabergers]

sounds great.

[@herrhendrik]

😍

[@motohead7665]

Nice work! I've got a 95, since 1999. There are not much people, put so much work and money into the first watercooled gixxer. What ignition coils do you use? Does it improve the motor running?

[@RareTech47]

Amazing ! What’s wheels are those too?

[@StanleysGarage369]

Dymag

[@alessiosaccucci9781]

Quanti cavalli ha fatto

[@MHLivestreams]

I have the carbs with the 'power jet' circuit which are supposedly difficult to set up with no airbox, would love to swap them out for flatslides. Did you have much trouble dialling them in? Great bike, sounds fantastic.

[@StanleysGarage369]

Slight adjustment on the mix screw and runs great on the street and track. I had to adjust settings when I added more air flow and again when motor was built with bigger pistons and stage 2 cams.

[@BrUnO18150]

Hey jason. Could you tell me the route of the hoses of the oil catch tank? I supose: Head breather to tank and tank with a smaller hose to airbox?? Thank you!!!

[@StanleysGarage369]

I don’t run it to the airbox. I run the exit hose from oil catch tank under the bike. pin.it/6Q9Zqqr

[@Jman955i]

39 or 41 mm Flats?

[@StanleysGarage369]

39mm