1995 Suzuki Sidekick Transmission Overhaul AW 03-72LE (A44DE) Part 2 of 23

[@1966cambo]

Just watched part 1, gotta say, really appreciate people like you that take the time to video and post stuff like this for the rest of us to benefit from!

[@nunapitchuk]

Thanks for saying so. It is fun sharing my hobbies.

[@timothytrump9002]

This is a great video series, you are obviously very knowledgeable at this. I need to know about the solenoids though. I know that the two on the one side of the filter are shift solenoids. The one on the other side of the filter, is that the torque converter clutch solenoid?

[@nunapitchuk]

I'm a little baffled. There are only two solenoid valves, right? I'm not sure exactly what you are referring to.

[@timothytrump9002]

@@nunapitchuk That's ok sir. I found it in video 14 I think, where you dismantle the lower valve body. There are three solenoids there. The two sitting side by side are shift solenoids. The one on the other side of the lower valve body is the torque converter clutch solenoid.

[@nunapitchuk]

@@timothytrump9002 Glad you figured it out. I guess I need to go back an review my own videos. Ha. It's been awhile since I did that.

[@HanifEFIMechanical]

Good work

[@samuelseidel6148]

So I have a question. I’m a beginner but there seems to be the main two splines and a third keyway that requires rotation of the torque converter to reinstall, and then it slips all the way on. I did not know this and reinstalled the transmission and was having difficulty getting it bolted on and had a loud pop. I took it back down and rotated the torque converter until it slipped all the way on. I’m afraid I may have sheared something. I did bend the flywheel. 😂 My question is what does the thing that seats in seat in to or what is it for?

[@nunapitchuk]

I think I understand the question (not positive). The torque converter has to line up just right to slide all the way in. I think the reason for that is to line up the oil ports so the transmission fluid flows through the torque converter properly. Sometimes it slips right in and sometimes it is a real pain. The real problem is when it seems like it is all the way in, but it is not. I have done that too. One time I struggled and finally got it on and ready to bolt together just to discover that I had forgot to put the spacer on. I have actually done that twice and had to pull them apart and start over. So much fun. If you cannot get your flywheel perfectly strait again then I recommend replacing it.

[@franktyred9195]

I am about to start my rebuild on a 2002 03-72LE and was wondering what manual you used to rebuild your transmission? Thanks for the videos, they help a great deal.

[@nunapitchuk]

I used the factory service manual for my particular vehicle. I also have a pdf of the transmission manual (exactly the same).

[@duketogo2616]

Do those metal lines that run over the solenoid packs just pop right out? I've got some failing ones I want to replace and see if that gets it going again. I managed to slip the first one past the lines and that worked for a bit but now the other solenoid packs went out as well and there's no way I'm getting by those lines without removing them. You seem to remove them very easily in those video but mine are in there really good. Are they held in by something internal that you removed during the teardown?

[@nunapitchuk]

Sorry, I never saw this comment. Yes, they just slide in. Should be a little snug. The oil pan itself will keep them from sliding out.

[@hectorrojas8932]

I really need to learn, how do it

[@1966cambo]

Does anyone have an issue with KZbin comments not being complete? There are a number of them here and I have the same issue with other videos....what can be done?

[@nunapitchuk]

Some are people using online translators to try and write or ask questions in English. The translations are often not great.

[@alwinvergz9617]

mr cook i want to rebuild my escudo g16a auto transmission, what is the part no. of the rebuild kit and where will we order the rebuild manual or guide book? thanks in advance

[@nunapitchuk]

First step is to find the tag on the transmission that identifies the type of transmission you have. You can find rebuild kits on Amazon, Ebay, Megazip, Allibaba, and other places. I bought my gasket kit from RockAuto and my plate kit from Transpeed. If you plan on replacing the plates and discs like I did then get a master rebuild kit that includes the gaskets and plates. Probably between $200 and $300. I used the factory service manual. I have a pdf of the transmission section also. You can contact/message me on my facebook page, suzuki sidekick restoration project.

[@luisposada7556]

Mr cook, my aisin 03 71LE since it was rebuilt is a knock every time I put it in R,or DR waching your video I am sure you can help help me. thankyou.

[@nunapitchuk]

Mine is still shifting kind of aggressive until it gets warmed up. Not sure why. Maybe the accumulator pistons that are suppose to absorb the shock, but then when it is warm it shifts perfectly. My new hypothesis is that some of my clearances are probably off. Maybe some of my disc packs are too thick or too thin. I did not measure them super carefully. Mine does not make any knocking noise though. It might help to get under it and let someone shift the gears so that you can try to hear exactly where it is coming from. The first thing that comes to my mind for a knocking noise is a bad universal joint on the drive shaft. You can chat with me through my face book page called "suzuki sidekick restoration project".

[@healthymixzemason1397]

I have this same transmission in a Mitsubishi Pajero

[@nunapitchuk]

Yes, it was used in a few different cars.

[@РоманХарченко-п3с]

Помогите с АКПП!!! Авто Эскудо 1992 г., 3-х дверный. Двигатель 16 клапанный. АКПП 4-х ступка. Проблема вот в чем: резко без каких либо симптомов пропали 3 и 4 скорости. На "D" трогается с 1 нормально переключает на 2 набирает обороты до 2.5-3.0 тысяч и такое чувство что вылетает в нейтраль, отпускаешь газ скорость падает менее 40 км/ч и при нажатии на газ АКПП подхватывает на 2 скорости. На "2" трогается с 1 переключает на 2 и не вылетает т.е. набирает скорость в зависимость от оборотов. На 1 и 2 не буксует едет как раньше нормально. Считывал ошибки и на Двигатель и на АКПП код 12 - ошибок нет. Что делал: 1. Почистил контактную группу на коробке как на форуме написано, теперь всегда задние фонари горят, раньше через раз горели. Но проблема не ушла. 2. Проверил Жижу свежая, по уровню. 3. Две фишки под коллектором впускным смотрел в порядке вроде. 4. Тросик кик дауна настроил раньше был сильно вытянут 2см расстояние было до бобышки, может когда головку ставили неправильно прикрутили. За неделю до этого головку снимал шлифовал, но я все как надо собрал да и неделю она отъездила нормально. 5. Мозги АКПП от исправной машины ставил, без результата. Нашел тему на форуме, симптомы один в один но там человеку повезло все само прошло."АКПП 92г.в проблемы" ЧТО ЕЩЕ МОЖНО СДЕЛАТЬ-ПРОВЕРИТЬ??????????Буду рад любой информации!!!

[@nunapitchuk]

Sorry, I am not familiar with your vehicle. I hope you can find someone to help you with it.

[@РоманХарченко-п3с]

@@nunapitchuk это такая же машина как у вас только руль правый ,японская .акпп вы же разбирали она один в один как ваша.я свою акпп тоже перебрал по вашему видео а она всеровно не работает уходит в авприю 3 и 4 скорость не включается пробуксовывает машина просто начинает реветь.

[@nunapitchuk]

@@РоманХарченко-п3с It sounds like you have too much space in the clutch/steel plates and they are not catching. It is difficult for me to understand for sure because of different language. You will probably need to take it back out again. I took mine out and put it back in several times. If you want to try to chat with me then use my face book: facebook.com/SidekickRebuild/

[@РоманХарченко-п3с]

@@nunapitchuk с дисками и гидротрансформатором все в норме, я проводил стоп тест 2200 это норма.стоп тест 2220-2500. вот не могу понять это электроника ,или в гидро плите заедает клапан который отвечает за переключения перидачь.

[@РоманХарченко-п3с]

With disks and a torque converter, everything is normal. I conducted a stop test 2200 is normal. I can not understand this is electronics, or the valve in the valve body of the automatic transmission that is responsible for the transmission

[@patrickmalupande347]

coveter