1997 - 2002 GM OBS Truck Cracked Dashboard Repair / Restoration Approach (Chevy & GMC)

Рет қаралды 2,108

DrShock

Күн бұрын

Пікірлер: 20

@jimrichard7296 3 ай бұрын

Great. I’ve been hesitant in pulling the trigger on this product. This gets rid of my hesitancy. Thanks much.

@joemalone3099 Ай бұрын

High quality videos and contents as usual.... some how it reminds me the excellent and educational PBS programings I used to watch years back . Great job on the dashboard ..one can no tell if it's original or not . Thx for sharing

@mariomata9177 3 ай бұрын

Excellent job and easy to fixed

@petergutwein2363 3 ай бұрын

😎👍🏼👍🏼🇺🇸🇺🇸 i got a 98 extended cab long bed 4x4 i v got this problem cool thanks fore sharing i got a dash matt butt how i stored it before install the sun faded it weird

@Thewindingstairs747 3 ай бұрын

It’s way better to travel and look thru suburbans tahoes and trucks to find a good one and replace it. I did. It was easier than you’d think. If you can, get the wiring harness off of the firewall too. It goes under the carpet and up the a pillar on the drivers side if you have the electrochromic mirror

@Thewindingstairs747 3 ай бұрын

Doesn’t matter what color you get either. Paint it with the interior paint and it’s gonna look great

@DrShock 3 ай бұрын

Personally I haven't seen an undamaged GMT400 dash in a pull your own parts yard in several years now. And I make rounds to several across three states as part of my business. I was after a factory new look cosmetically, more a restoration than a repair so that can be a decision factor also.

@Milkmans_Son 3 ай бұрын

I would have a hard time resisting the urge to pull the dash and do the work on a nice big table. Other than the extra time and effort involved, is there any reason not to do it this way? Finished product looks great.

@DrShock 3 ай бұрын

I would have preferred to replace the dash with a reproduction part, but those are only available for the 1994 and earlier trucks. So this product makes for a nice second choice. It's a very large labor cost job to pull the dash from a GMT400 truck. So this product is designed to avoid doing that and is a good alternative until someone starts reproducing the full dash for the 1995 and up style. In addition some of the fitment is press fit into very tight tolerances so it would be very awkward to try and do outside of the vehicle with the required pressures while the silicone adhesive it setting up.

@MrBowNaxe 3 ай бұрын

Another great job! My '99 dash is still in good shape but, good to know there's a fix. Silly question... Should I have that recall part on my GMC Suburban? I do have an airbag where yours has that cubby. Thanks for sharing and I can't wait to see what's next.

@DrShock 3 ай бұрын

Thanks, only certain 1999 models with the airbag installed were subject to that recall. Only SUVs as best I recall. www.nhtsa.gov/?nhtsaId=00V122000

@MrBowNaxe 3 ай бұрын

@@DrShockThanks for the link. My vehicle is on the list...

@DrShock 3 ай бұрын

There's a video in my library if you decide to DIY. The dealers won't have the parts anymore.

@andyfarrior4146 3 ай бұрын

Have you ever repaired how the dash bezel attaches to the dash? i have dash cracks over two of the clip points so the bezel does not snap in place. Does the Dashskin help with that? Suggestions?

@DrShock 3 ай бұрын

I'm not aware of an aftermarket solution for that trim part. In the past I've been able to find them off of low mile salvage yard vehicles in good condition though.

@selrahc2061 3 ай бұрын

Yeah I found a good used one.

@DrShock 3 ай бұрын

You were very lucky to do so. Most any GMT400 that wasn't majority garage kept has succumbed to decades of UV radiation damage to the dash plastic by now.

@antonep4721 22 күн бұрын

What do u do if around the bezzel is cracked all up?

@DrShock 21 күн бұрын

There isn't an aftermarket reproduction on this part available yet, for the 1995+ design. But hopefully soon. In the meantime, the only option is to hunt salvage yards for a better piece.