1998 Toyota Camry Coilovers INSTALL - MaXpeedingRods Coilovers

MaXpeedingRods: au.maxpeedingr...?tracking=5df7253795b92
Coilovers I used: bit.ly/2Ft3y9k
-- Use Code "Rex H" for 9% off --
MaXpeedingRods now has warehouses in Australia and
has the ability to ship out almost all orders placed within 24 hours!
Free shipping for Australian Residence
➢Store: www.benkispec.com
➢Instagram @rex_hyt / rex_hyt
My GEAR -⬇
Camera geni.us/tWKpwD
My FAVOURITE Lens geni.us/hmxjq
Vlog Lens geni.us/Q1cld
BEST Starter Camera geni.us/q4yoK
Gimbal geni.us/JprwEje
Microphone geni.us/O3njD60
TOOLS I USE -⬇
Socket Set geni.us/8UBox
PICKTOOLS (Live Saver) geni.us/oQKoU0
SEND ME STUFF HERE:
P.O. Box 2178 Brighton North 3186, Australia, Victoria

[@YYClowcals]

🔥👌 clean slamry m8

[@RexH]

Nooo wayy! I watch you guys ! Thanks for commenting on my vid haha, keep up the great work ✌️

[@ZacBaldy]

"Slamry" number plates need to happen 😉

[@RexH]

If the plates weren't worth more than the car it'd probably happen 😂

[@menarenotwomen]

I put these on my 1990 Civic EF and they were actually really good quality for $280 USD shipped. And the clunk is from not preloading the coilover before you tightened the down. I didn't have any sound from mine.

[@jerkhoff5401]

to lower the front yougotta compress the springs so you can adjust the locking nuts to lower the whole thing

[@mrunabout]

If it's clunking while turning, it could indeed be spring bind as you stated. You can buy some spring perches with a radial bearing. As far as the front ride height, you can try buying shorter springs.

[@RexH]

That's a good idea, unfortunately found with the coils all the way we rub pretty bad so gotta get spacers for the front too 🥵

[@bulldriver1]

I have had the same coilovers on a 2000 Camry for about 7 to 8 months. I sprayed the hell out of them with CLP (gun lubricant) and havent had any knocking since then. Hope that helps

[@JAPerror]

does the front & rear lower or does only the rear lower as in this video ? I have the same car

[@danielcastaneda7801]

Bro, swap out your front spring for a 6-7" tall spring, 8k perhaps if you feel 10k is too stiff. Did this for my ES300, and absolutely loved it. Eventually you'll find the rear coils won't go as low as the front, but there solutions out there. I ended up going for the Godspeed Mono SS for the rear in order to get an even drop.

[@keagan2192]

I’m thinking about buying these for my es300, I’m not sure where to look for shorter springs in the front to make it even though

[@samuelromero8364]

I have the same ones on my 2007 scion tc and you have to take them apart and use litheum grease on the spring at both ends and the little washers that rub together

[@Testa11]

This clunking noise is the spring! I had the same problem with mine on my 328i. I'm sure you can get the front to get lower like low low

[@thesootyhilux1321]

Take the locking collars out of the front and she will sit as low as the rear

[@Hakuna_My_Tatas]

Hmm..I might give this a try tomorrow. Theres the collar to lock the lower part, the locking collar your talking about is with the 2 locks for the preload, right?

[@rtroeun]

Take two of those collars off and keep the locking on. And it will drop real good. That what I did with my car. And it dropped it like 1.5 inch more.

[@JuanLopeZ-vc1ws]

So take off that part under the top hat in the front struts correct ?

[@StewartLaw8891]

Get swift springs for front that's what everyone does! Also my coils stopped knocking after 3 months!

[@Slamry99]

Stewart Law the swift spring compatible for maxspeedingrod coilover

[@emersenandreasen8457]

Version 2 camry xv20 coil overs have been improved I got sent 2" shorter coils for front ok So can get front lower now on camry St

[@danielbautista0000]

How do you know which version to buy?

[@tihomirzhelezarov2332]

Had a set of these installed on my camry, definitely made it siffer and lower, handled well, but made the worst clunking sounds when turning and eventually ended up taking them out :( and about 3 of the top nuts were seized when removing them too. Ah well, hope you enjoy these and not have such bad luck like me

[@williamclick9771]

I've thought about coil overs. I bought Suncore struts and shocks for my Camry only to have a mechanic to break my rear passenger shock. Suncore will only sale them in pairs. What the mechanic did was use a hammer on the rear shocks. I was told he didn't have to do that. Anyways I'm driving around with a broken shock. And it's noisy too. Like what you've done to your Camry. So cool.

[@cameronjones2568]

Also your clunking could be outer tie rods, mine were shot, gotta upgrade steering parts and get an alignment

[@alexkeong8655]

Dude!!! ..... Get high end adjustable suspension and coils it's worth ur money and time... + comfort ride and handling

[@derekgreen2823]

alex keong exactly. Do it once, do it right.

[@danielcastaneda7801]

@@derekgreen2823 for the Camry, BC's will not go low enough.

[@kokomix1903]

Yesss another Camry video

[@jscvibes4488]

I'd bring the back up to 3 fingers too... they look nice

[@therealboofighter]

When you had everything laid out on floor I didn’t see new sway bar links for the front. When I did the coil overs on my MR2 they came with the set. Your sway bar could be hitting and binding.

[@TheEdd212984]

That sounds is your wheels rubbing with your coilovers my mr2 did that in the front it was rubbing on the spring had to run 5mm spacers lol

[@mrma5605]

Happy to see the master who started all!

[@johnosis69]

I want you to take my Camry for a drive bro pedders springs Monroe shocks Camber bolts White line front and rear sway bar with proper drop links Also has it aligned at centreline suspension 😁

[@gedas3419]

The good old Maxpeedingrods coils. Half of europe starts to drift on those. Like 300$ per good set of coils

[@gokupokemon3040]

Amazing job and great price 10/10

[@RexH]

On a streak hell yeah thanks man :) 🥰

[@gokupokemon3040]

😄😄😄🚗🚗🚗

[@savage_han]

Adjust the preload and the front will go a lot lower

[@jetd6764]

Somebody did not know what the hell he's doing. U did it Rex, when u change from the stock ones to the yellow springs. Anyway, love your Camry and channel. Peace from the USA.

[@idolo6]

I've spent the good money on tein coilovers. have the same spring bind sound with one of mine from time to time. I dont have the bad fitment like you do. Only thing about the cheap ones that I wish I had are the mounts.

[@kevinp.caballes2649]

How are the coil overs long term? I'm planning to get a set for my 95 camry.

[@gedas3419]

Maybe if you get same stiffness coil spring, but shorter? Some well known maker like eibach. So spring preload couplers can go higher, and more stance would be available? Also about these clunks, maybe your spring is not pressed to top plate?

[@davidzajano611]

Actually a taller spring will prevent the binding. Spring height won't affect ride height more then a fraction of an inch, as the spring supports the strut, not the inverse. Eibach definitely makes plug and play springs and bumpstops for coilovers, a call or email to them and a few hundred dollars can transform most budget coilover setups into something that handles properly well without much compromise.

[@Anton-rt2kh]

It's my first car to

[@unfknknown9678]

Manual conversion next? 😉

[@RexH]

The Daily staying auto unfortunately haha

[@waatao9856]

How is it holding up? Any leaks?

[@cre8tivegarage157]

Car is rad definitely loving the channel vibes 🥂🔥🔥

[@Hakuna_My_Tatas]

Unfortunately i ran into the same problem with the fronts. 3 finger gap on my 99 prelude. Im still trying to figure out how else to fix this The fronts is adjusted to the maximum lowest setting without touching the preload set. If i adjust the preload to the lowest setting, the springs are now loose which i dont think its supposed to be that way.

[@xsonz2]

you are aware the front fender arch rises much higher than the rear fender arch right

[@arie1615]

Just built in sport springs

[@vishekchand4810]

Coilovers should've been the first mod on this car looks way better 🔥

[@jesseceyeli786]

I just put those on my Camry you should put headers an a super charger TRD .

[@jesseceyeli786]

How many mm spacers you got ?

[@my771]

The front can’t go lower on es300. I took one ring off where spring sit at and adjust bottom part all the way up but still now low enough.. I knew the spring in front need shorter..

[@deletedFin]

King springs vs coilovers price/performance for normal drive

[@djblueb914]

i wanna do this to my camry

[@gutterrashautomotive3361]

Back to your roots 😍 Shame about the front, but at least the back looks proper vip

[@RexH]

Yeah wish the front could look that good :((

[@garyperkins5603]

What size wheel spacers did you get ?

[@JesusGarcia-hu9xc]

Hey man is your Camry right hand drive

[@MR2Dirtbags]

Hey man heard everything going on Australia I love your channel not a hundred percent you live in Australia but if you are hope all is well.

[@puffthedragon8772]

Any one know if there's any trd parts for a 1999 Toyota camry except for the supercharger of course

[@whiteboibernard4614]

I have a set they do the same exact things on my Camry

[@thewanderingpnut1685]

I came across your videos and I wanted to ask, am I able to modify my 2005 Camry? It's a 4 cylinder an I've seen people install turbo among other things. I want to get an evo next year but I'd love to play around with my baby

[@iMidnightMonster]

now you need a sticker on the back window that says #SLAMRY

[@Vee916_]

Some 3 piece wheels will look good on it 🤔

[@waatao9856]

Have you still got them away still running good any lakes Knocks?

[@djzach9446]

Could you cut the front coil?

[@shreda125hilux7]

How much do these cost in Australia bro? When I wanted coilovers for my camry they were all $900+ AUD shipped from the US which isnt worth it so i have the springs..

[@shreda125hilux7]

Just heard it's 400$ lol not bad i got my king springs for 300$

[@High-Eye_Captain]

What your size spacer? and wheel/tire size?

[@thatoneasiankid8734]

Would something like this work for a sort of rambler build? I'm planning on putting some real aggressive all terrain tires and they rub on the springs could these coil overs work if I want a higher stance?

[@LukesRandomShit]

that sound sounds like the locking nut left loose

[@RexH]

We tried everything, couldn't fix it :/

[@kidjay12345]

I had the same one i had to get rid of em not worth it

[@louir1952]

Are these coilovers any good ??

[@richardguerra1712]

How are they holding up?

[@trustfire]

I have these, they ride like absolute shit, front doesn't go low enough but you can get replacement springs for the front. For $300 u can't complain though.

[@aidancarlisle7627]

I got a 1999 Camry LE. Need new shocks. What should I get??

[@thatboywiththefez]

Wish you had joined the 3rd/4th Gen Camry Krew on Facebook, you would’ve known not to buy these coilovers if you had. A bunch of us have used these and they’re garbage. I’ve swapped the springs on them to go lower, and they’ll never be comfortable to ride on

[@the__black__box]

ThatBoyWithTheFez what coils do u guys run? I want to run coils but im on a budget and these coils in the vid are cheap. I got a v6 5spd 1999 camry, check my channel for a quick vid, thanks

[@Knava999]

coilovers had to set in. thats why they were making noises.

[@ulses917]

You think the head and engine parts from a mr2 fits to my 4cyl camry

[@tokpahnushann1104]

What are the sizes of the wheels

[@thomaswagner3885]

Awesome slamry i will have a slamry too:))

[@nonm.o.8902]

Honestly the wheels are a bit to big, with some smaller ones you could get it a tad lower and looking way better “in my opinion”

[@josephfalco8111]

how are the coils holding up?

[@TWAN330]

Quick question can I put just put coil overs on just the rear I have 18x9 on mines and the back sits up a little to high

[@nelsoncubias191]

Buen video

[@BetterThanGold2]

Lower the front

[@quinton7854]

wait arent spacers illegal in aussie land?

[@paradigmshatterer7276]

How much those bad boy cost??are they really expensive?

[@qsgarage4052]

Did it settle after driving it need an update video

[@michaelng8882]

I might have missed something, but what's with the Link G4 box? And how did you end up getting the rounded lock nut off? Also, organise togue run please xox

[@RexH]

Someone has a keen eye haha and defs need to touge with subs

[@YungSteambuns]

I'm pretty sure he had to drill that out

[@tonyg.6827]

I got the same issues the front is higher than the back. And I can't raise the back.

[@fercon9892]

Maybe u mistook the fronts from the back? They should all match in height

[@RexH]

They only go in one way unfortunately so that's all you're gonna get out of them

[@mmojim8011]

Do yk what the thread size is?

[@devinschaefer4672]

I got a 2000 xle v6 I rly want to turn it into a sleeper I just wanna gap people in a grandpa car😭

[@noodlefart1029384756]

transmission swap next?

[@___rocaj]

For some reason they never lower on the front and they always click with this chassis es300, solara, or camry.

[@thomaswiersma4726]

Do you live close to all those fires in Australia?

[@RexH]

Luckily I'm a fair bit away form the fires, very fortunate

[@mikevel4387]

Is that 1 inch spacer in the rear ??

[@ProhibitedCrew]

I live on a hill and my camry bottoms out at the top on stock suspension 😭

[@bigkeg9173]

Drop linkage for the fronts, can you get one ?

[@kyliebaker8936]

Hey do you still have these on your Camry? I have a set I was trying to install but my lower two suspension bolts wouldn't fit under the small lip of metal on the bottom end of the coilover. Bit of a bummer. Did you have that issue? I have a 2001 Camry. Thanks.

[@benedettohibler3719]

I had the same issue on one of mine. I think it's just poor manufacturing. I banged mine with a hammer to give me enough clearance. It wasn't a pleasant experience, but I eventually got it on. An angle grinder would probably work too.

[@qsgarage4052]

So did u figure it out

[@seamore162]

That's the brand I used but my car didn't get that low in the front.

[@thatdamnmanhd7984]

You have to order shorter springs seperate

[@seamore162]

@@thatdamnmanhd7984 do you have any suggestions?

[@cisco7182]

What size rims are those?

[@Nyte1997]

Will it fit for the AE110 97 Corolla?

[@navadaspencer7252]

Can you help me find some suspension for my car

[@whatiknowinkuwait7686]

How much u spend for that

[@qsgarage4052]

I just put the coil overs on my 97 Camry Nd I’m having the same front issue did it settle out after driving it more or it’s still sitting like jack stands

[@B3ASTLYPLAYZ]

Take the locking collars out the front

[@keefykicks6102]

I got a good 50,000kms out of those ebay coilovers in my gc8, cant complain for $300, stiff AF tho😂

[@_i-kr6eg]

I call bs 50000 k's on those. I'm a mechanic and those coilovers will not that long .

[@keefykicks6102]

@@_i-kr6eg iM a mEcHaNiC😂😂😂

[@djzach9446]

Your neighbor has the same car bro

[@c.o.n.collectingofnostalgi889]

So is this still your daily bro ?

[@RexH]

Yeah man

[@c.o.n.collectingofnostalgi889]

@@RexH great work bros can't wait to see what you do next man, I like the style you did with the SW20 and how it still looks streamline but different so I am anticipating that you would do something road with the camry as well 😊🤘

[@jerielandujar-gonzalez3981]

Bro lower the front ones all the way, what i did on my 97 is that i switched the front springs on the coilovers for 2000 honda civic lowering springs an they ride so much smoother and better and also they let you lower the car way more

[@cameronjones2568]

Didn't even roll mine

[@teamtetris1]

Anyone else live in australia have to pay so much for shipping with these

[@rcplanepirate]

Hi. Going by the link below for the set you have I think 10kg springs on the front is a bit hard. You should be able to find some 8kg springs that fit for not too much money. Could try to get some that are a bit shorter as well. Get the front lower. You may be able to help with the funny noises by greasing your top mounts. Was watching another video earlier about it. kzbin.info/www/bejne/a4vJaId9i5dlY7M