Car or truck howling noise when driving? How to evaluate your wheel hub bearings.

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@MrAquinas1]

Sometimes they can give a wobble noise before the howl. Mine came on after getting all new tires. The heavier new tires were the straw that broke the camel's back and immediately brought on the noise. Naturally since it cane on with new rubber, I was convinced it was from a defective tire and so was my mechanic because we couldn't get any noise or movement on the lift, but it was very loud while driving We rebalanced and rotated the tires. The noise was still coming from the same spot. So I gambled and chaned the bearing. Problem solved. And even though it did not make noise while spinning the wheel on the lift, when we got it out, and spun it on the workbench we heard the grinding. Go figure?

[@kevinthealienfpv]

I love her sense of humor and how incredibly thorough she is! "But it should be fine" had me rolling. Very good video, Sue.

[@MrAlexdimm]

Im a sexist a hole. I never woulda thought the best explanation and instructions would come from a woman like this. I am hands down impressed. Great informative video, more in depth than any I have seen on the subject.

[@rl4889]

The best , most involved video on KZbin regarding wheel bearings and hubs. Ty

[@t-tokyo9107]

I love this channel, you guys are so thorough. I wish you guys were here, I would wholeheartedly trust you guys with my car.

[@bellam6511]

RIGHT.. I WOULD BE LOST WITHOUT THEM!

[@zoli10]

I love this channel,I love her humor and I love her ❤❤❤.

[@flycorvus]

She's the best mechanic lady on YT. Mi, Zolik, tartsunk össze ;-)

[@abbasniksadat1781]

We couldn’t hear the noise because you kept talking while driving the car.Other than that nice video. Thank you

[@rebelroar78]

I had a bad bearing in my Camry and it made that noise. Thought it was the front right hub bearing because I hit a curb. Took it to a mechanic. Turns out it was the rear right. Glad I didn’t try to do it myself because when driving it 100% sounded like the noise was in the front. The mechanic did great work for me before. Used a stethoscope and determined it was 100% coming from the rear even though he agreed it sounded like it was in front while driving. If I tried to DIY I would’ve ended up replacing the wrong part!

[@miomine3527]

Love how you explain and show a proper working part..and a non proper working part...best way to teach..

[@greywolfthunderheart]

Excellent Sue! Thank you! With this video anyone should be able to diagnose & repair wheel bearing problems.

[@tinaglenn1600]

Love this video, her humor, and how detailed she is! Very fascinating to watch and learn!

[@Nick41622]

Scotty Kilmer is better.

[@paulntraci99]

The only person to mention the importance of torque specs. and their impact on the hub. 👍

[@michaelreeves8164]

Excellent video once again. A very capable teacher and mechanic.

[@joelpearce1350]

I love this channel! Awesome to see a female mechanic!

[@fishon1073]

Over tightening with a impact gun will also set your ABS light on that hub. I found out after 6 months of trying to diagnosis my ABS light. Replaced a CV axle and tightened with a impact gun on the axle nut . Squeezed the axle into the hub and threw off my wheel sensor and tire speed. Lesson learned. Also you should replace your axle nut each time you remove it.

[@ratedRx69]

That’s what she said

[@timpany921]

Hello can't thank you enough. My 2014 Ram was making same noise for about 6 months. I watched your video and took it to a mechanic and now its fixed. Bad bearing.

[@spelunkerd]

So nice to see 1A putting a little focus on diagnostics.

[@dnlmachine4287]

Agree. Good to see you still active Spelunkerd. Stay gold.

[@ronsag65]

Great vids, I salute you. You are one of a kind who is mechanically inclined and knowledgeable, keep rocking.

[@ronkorsch1464]

Was starting to hear the "howling" from the front of the truck. Got home and measured the rotor temperatures as close to the axle as practical. Truck was just parked with wheels on the ground. Using a hand held infrared thermometer, driver's side was 90F, passenger side 140F. Wasn't sure if it was binding brake pad or wheel bearing, but I knew which side needed work. Turned out to be wheel bearing.

[@misterphuzz]

I enjoy videos by this channel in general, but I really liked this one. I really liked the educational feel to it.

[@hittz8331]

She's very informative accompanied with a nice personality. Thanks Much, 1A Auto.

[@johnrobertsguitar]

Love this video, Sue is awesome. So knowledgeable and able to help me learn, great teacher

[@skipwilliam5639]

I was today years old when I learnt how to check a hub without shaking the wheel left or right

[@chasenoorda9931]

Thank you for this in-depth video. Very educational

[@bigredjohnson6921]

I bought TRQ front hub and bearing set for my Chevy 2500HD, from you folks. Put them in to specs. Now 2500 miles later they are whining like crazy. Have not yet started to wobble thank goodness. They were replaced under warranty, but I'm afraid to put them in, I don't want to be doing front hubs every 2500 miles. Probably end up spending more and put in moogs.

[@doneropersaud1607]

Very very good explanation, truly respect what you guys do. Thank you.

[@tomaswhite6708]

For some vehicles Napa carries an entire knuckle with a bearing and hub already pressed in. Makes wheel bearing replacement a lot easier when the bearings are press in.

[@ttwwiizzll1]

I love your precise and clear explanations as what why when who them him her 🤣. Excellent content 👌🏾 to say the least. Keep em coming!!!

[@jackiejones4188]

Love your 1a auto site, very pro love watching it

[@vaughndibble4598]

This is one of the best explanation of a wheel hub assembly

[@alfonsog6661]

I’m a fan of this Chanel and SUE 😇

[@edwarddemedeiros3607]

Great information. This woman knows her stuff!

[@mystikalxs3996]

Great video. It definitely refreshed my memory. I learned so much. Thank you. Much love ✌️💛

[@1AAuto]

+Elizabeth Pena Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@jaeb.2842]

Great video!!! I miss the daily videos!!!

[@michael184272]

Another 10.. Very well done..

[@garyrohlman6013]

GREAT SHOWING AND TELLING HOW TO DO DO THE COMPLETE JOB. GREAT LADY TECK.....

[@29madmangaud29]

What happened to the old style, when did they go away? You know, you remove the nut, cover, and pull out the bearing, grease it in your hand, and re-put it back in, install the nut, turn it , and cotter pin it? > When did they go away?

[@archivestereo]

You are my favorite mechanic on KZbin

[@clintonwilliams4570]

Excellently explained!

[@djjammindave]

I LEARNED SOMETHING NEW TODAY, TORQUE. THANK YOU....

[@ne6764]

Just started a howling noice forming from the front end. 2015 gmc Sierra. Never had a howling noice before. So ima get in jacked in the air and take a better look at the front end/wheel bearings.

[@renostubbs8504]

Nice video, my question, if you are having issues with one bearing at the front, should both ends be changed??

[@ratedRx69]

Good question

[@belladonna131]

Really complicated, but I'm getting the gist of what should happen. Very thorough mechanic. I wished she was near me. I'd book her in a heartbeat, if she was free! ❤. Probably has clients for three months in advance!🥰🤗😍.

[@zkampyman]

Sue you are awesome!

[@ThornesGuns]

I've always found that the best practice is, if your going to replace one side, replace the other. otherwise you will be replacing the other side soon anyway.

[@jg11596]

terrific video - thank you

[@SatnamSingh-pn7ob]

Very well explained

[@Auser12349]

Ive had my rear brakes replaced and asked for an inspection to make sure nothing else was needing fixed i was told everything is ok, private mechanic. I've had my back tire fixed and asked for an inspection to make sure everything is ok. Goodyear . Went to Subaru dealership 2x , one for a transmission fix. Got an inspection.. Was given green light , came back a 2nd time cv axle broken , inspection... Green light. This month my car has been in the shop inspected by at least 5. I'm still hearing a howling noise. I know people miss things. But this is not something mechanics would miss. 3,rd time at the dealership and they diagnosed my rear bearings. By this time I'm living in my car due to the money I've had to put in it. I' wish this was an easy diy fix.

[@josec7361]

Thank you for showing me how to switch it out.

[@Worry...about...yourself]

Good video

[@alwajidtech705]

Thanks for the video. I'm trying to diagnose (amateur mechanic) a vibration coming from the front driver side of my vehicle. I'm starting to suspect a wheel bearing also after seeing your video. May try what you did with the vehicle in the air. Thanks man!

[@patricklandis3910]

You also have the best videos and get straight to the point versus all this jibber jabber and all this music and stuff. It’s very irritating.

[@ramiram84]

i really like watching her! she's very knowledgeable.

[@leomachado7676]

You are the best Sue😀

[@ya-tk4zx]

I like this woman she is very professional and know how to explain Thank you

[@pedrobaggio1084]

Mis respetos para esta señora mecánica

[@1AAuto]

+Pedro Baggio Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

[@caseycastro587]

I love this lady! I hve adhd and I was able pay attention the entire time

[@icandivideos5743]

I love your video! Yesterday I started hearing it howling, just like your sound. And I was freaking out! Heading to mechanics tomorrow. Thank you! BTW where is your shop located?

[@1AAuto]

+iCandi Videos Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@ammsar4425]

Thank you from heart brother and friend from iraq

[@LovelyKauai]

Hi, Sue. Have enjoyed your work for years. Thanks.

[@eagleoncloud275]

Good note for bearing movement

[@PBS19]

Excellent video…well done!

[@TheGenerationX894]

She's good. I do hate these new sealed hub bearings. There's nothing better than the old application, with a castle nut and cotter pin. It was good enough in the commercial semi truck world, it has to be good enough in a small SUV or pickup.

[@ProfessorDickweedMD]

I've always been VERY curious. How exactly does a damaged hub cause damage to the inner race of the bearing? Unless the hub itself is acting as the inner race which doesn't seem to be the case?

[@darrellteague8629]

We have man made potholes in my town. On avoidable potholes with lids on them. Yes the city put some right in the lane.

[@rsdaarud]

Thank you, Sue!

[@tilenvidmar9074]

My axle nut is tightened so much, i put all my 220pounds on a 6foot break bar to unscrew it, maybe thats why the car suddenly start to shake sometimes at higher speed

[@rogermerrett6678]

Thank you for a great video. My 2018 Hyundai Santa Fe was making noise from front end, so suspected wheel bearings. No wheel wobble, so wondered what was causing the noise. Rotating the suspect wheel did not make much noise, because not many RPM. Jacked all car up and ran engine to turn wheels. The vibration in the strut spring was the deciding factor. No vibration on the good side, but significant on the bad side. Removed the bearing assembly, and then you can tell that it's bad with that grating noise/resistance as you turn it.

[@sarahgonzales6159]

I appreciate this video I thought maybe I. Had a CV joint problem but until.i saw this I know now that it's a ball bearing problem. How much would this job cost me

[@noelelnolo9642]

Excellent explanation! You are so meticulous and thorough u never leave anything to the imagination. Extremely well explained and all possible reasons for the problem explained and examined. Thank u!!

[@RoySolomon-qq5uz]

Thank you. Very clearly and patiently explained. Dried up grease is what my mechanic said too.

[@dmann1209]

Awesome channel, like the explanation along with the description.

[@deegee9560]

Awesome mechanic skills! Wish you guys and gals were in Los Angeles!

[@1AAuto]

+Dee Gee Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@Hector-et4zy]

Wow finally a video that shows exact noise my car makes, except I feel it coming from the rear.

[@mariem5990]

Really love your videos. Thank you

[@Atlantic-eagle53]

My Saturn Aura has a noise but only when accelerating, and it's about right there, especially on 1 and 2nd gear

[@emiliog.4432]

If I had my dial indicator and mag base, I would check for run out. Won’t a bad knuckle cause premature failure of a WB? Thanks. Great presentation.

[@attribute-4677]

Feeling the growling vs trying to shake the wheel. That’s brilliant! Thanks!!

[@papagigo1]

@Albe from Hudson NH ,,, ,, this mechanic knows what she's doing !!!

[@Kierslee]

I was not aware of the potential problem of over tightening the wheel bearing by using the impact wrench for the axle nut. If I have over tightened should I back it off and verify the torque or is the damage done and the hub assembly need to be replaced?

[@seshachary5580]

VERY EDUCATIVE. THANK YOU REGARDS

[@MichaelHernandez-lc2wb]

Amazing, clear, detailed. channel subscribed!

[@sparky1044]

Talk about dumb luck, I just changed my bearing on the grand Cherokee today. Fun fact: when you buy a new dust shield to go with the new bearing, remember to put it on before you re-install everything. Do as I say, not as I do lol.

[@ST1300ful]

I love your videos. I had my CV axles replaced and afterward, I did hear howling noise at high speed, also at 40mph there is sound like a distant helicopter. I believe they probably over torqued the CV Axle nut. I noticed less MPG and the car at hwy speed did not coast like it used to, it slowed quickly when off the gas. So I think my wheel hub/bearing is damaged. Over time it does seem to have improved but not normal. Is it worth loosening and re-torqueing the nut or is the damage done.

[@GTOberfest]

This is more informative than i thought it would be...nice.

[@404notfound.....]

Excellent advice, especially the torque specs of the wheel hub, how many times I've seen under or not at all. Same with the wheels, yes I know time is money but use some common sense.

[@luisflores6780]

I needed that information. Gracias.

[@israelestonina5949]

Thank you for sharing your videos and knowledge. Would you also have a video on CV axle that happens to be making noise or around that area?! Cuz I have a 2015 Subaru outback 3.6R that when I am turning left, I hear a clicking sound noise. Not so much louder than turning to the right. Thoughts please. Thank you in advance.

[@christinasmellman5078]

i've seen a video on here by someone else showing the clicking while turning sound caused by a bad axle. search bad axle clicking

[@RPB-nx7vj]

You are awesome Sue

[@hansibryan]

Yes, that happened and replaced it was from the front driver side.

[@ashutoshkumar8630]

Great diagnosis

[@speakbigtruth9383]

Another great video! Very educational. Thanks Sue.

[@billydenham9313]

2012 Chevy Silverado 1500 5.3l LTZ has a humming noise in the front, so I replaced the driver side hub assembly, but the humming noise is still there. Funny thing is, it sounds like it's coming from the center of the front not where the wheels are. I don't like guessing because that's what I did with the hub assembly. This roaring sound is a constant sound that starts around 20mph and doesn't stop at a higher speed. Is it possible for it to be coming from the front differential or is that out of the question? The truck has 140k miles on it, but it's been treated nice over the years. I've checked all the fluids in the truck also. I've tried to pin point this sound by rolling up my windows and listening to it. It has me puzzled because I thought it was coming from the driver side, but it sort of sounds like its coming from the center of the front wheels. It's one of those traveling sounds. Let me know what you think.

[@loganbyrne3054]

Mine is a thumping noise, but the engine vibrates since I got it. So it's been loud since day one. Except it's getting worse. 2000 Fortd Focus.

[@SilverloafCustomRazors]

Excellent info and presentation, thank you!

[@williamfry6087]

Glad i found this, thank you.

[@nunyabiz334]

No, we CAN'T hear any noise. The beginning doesn't give us any clear noise!

[@scorpio_9810]

Great tutorial .

[@dandambrosio7499]

Thx again Sue ur the best 😊

[@Tazyz]

Man I did that exact same thing you said don't do. Smdh order 2 sets of wheel bearings. And I did so can I had some play on the right side. Well that wasn't the problem so I check the tires there good so now I'm trying to figure out what's going on with my 2010 chevy malibu