1st Tool Haul Of 2020

Check out the newest tools I have added to the collection in the first tool haul of 2020.
Gear Wrench Sensor Socket Set
www.amazon.com...
Lisle M20 O2 Sensor Bung Thread Chaser
www.amazon.com...
Lisle M14/M18 O2 Sensor Bung Thread Chaser
www.amazon.com...
Milton Standard Bore Tire Gauge
www.amazon.com...
Milton Lage Bore Tire Gauge
www.amazon.com...
Circuit Load Test Leads
www.amazon.com...
Sunex Impact Torx Sockets
www.amazon.com...
Flexible Magnet
www.amazon.com...

[@tonychandler8908]

I have been in the business for 44 years and I love my tools I love to see a young man like yourself doing a good job and investing in your future buy good tools they will be with you along time keep them clean and put up everyday

[@ValleyCityAutoYT]

Tony Chandler Much appreciated!

[@djosbun]

You are looking 'smoother' on this video, compared to the first ones. You come across as maybe a little more comfortable in front of the camera? This is an A+ video! The details you share on your experience with the tool (or 'why' the tool) is something you don't see often in other videos. Keep up the superb work!!

[@ValleyCityAutoYT]

Dave Osbun Thank you! Definitely trying to improve all the time!

[@aaronpeople101]

I really enjoy these videos as an entry level cat tech. I’ve been buying a lot of tools lately and your recommendations help. Thanks.

[@ValleyCityAutoYT]

Aaron Purtell Absolutely! Glad I can help!

[@CanadianCharlie64]

Good choices on your first tool purchase of the year, hope many more to come. Thanks for showing the KZbin community that its not all the big tool truck brands that you should ever buy. I have those O2 sensor thread chasers and they have come in handy over the years.

[@ValleyCityAutoYT]

CanadianCharlie64 Absolutely, and that is good to know about the thread chasers.

[@AlexRuddell7]

Hey bud, don’t know any magnetic sockets but in the mean time I break a latex glove and put the bolt in the socket with a piece of the latex glove in between, it takes up the gap and keeps the bolt in the socket, hope it helps mate, keep smashing out these videos 🤙🏻

[@kuattro2689]

Great video man! This is the type of content I love to see because it's so helpful!!!

[@ValleyCityAutoYT]

Cameron Kleckner Thank you!

[@johngibson3594]

Thanks for backing that up I have always said impact will not be warranty if the know you put them on a ratchet. The only sockets that can be used that way is grey pneumatic duo sockets. Why not make your own magnet 12 point socket. Buy a neodymium magnet get your bolt and apoxy the magnet into the socket at the correct depth. Great vid

[@ValleyCityAutoYT]

John Gibson Not a bad idea! Thanks for sharing!

[@GCraigmile]

Great Video 👍👍👍👍 that tire inflating tool should have at minimum a 10 foot whip hose on it.. As a heavy fleet mechanic you need to understand that large tires like to explode there sidewalls out it’s called a “zipper” and you should never be standing with a side wall facing you!!! Put a longer hose on it and stand to the side.. I learned the hard way. 😖😖😖😖😖

[@ValleyCityAutoYT]

Truck Mechanic Yea definitely! We had training on it. That’s why I zip-tie it on and have the locking head. It takes a long time to fill too.

[@OneMechanic]

I got the same one with the 10 foot hose.👍

[@blacksmoke5009]

That load test tool is definitely a must have! Thanks for sharing 👍

[@ValleyCityAutoYT]

Black Smoke Hell yea!

[@phillipchambers8487]

Christian, Great Video as always! The Milton stuff is Top Shelf Heavy Duty. I have a quite a bit of their stuff in my Box as well. Anytime I use Ball Valves on anything, I use Milton Brand, and I plumbed our entire Shop for Air, and used 100% Milton Hardware in that system. Keep up the good work Buddy.

[@ValleyCityAutoYT]

Phillip Chambers That’s good to know! And thank you!

[@larryl2682]

Interesting to see what heavy equipment tech has to buy, as a diesel truck apprentice I’ve been having to buy so much already 😂

[@ericcorse]

You can't go wrong with Milton products, they have been in business for while.

[@Brad55102]

There's a small chance you have an addiction.

[@ValleyCityAutoYT]

Brad Most definitely! 😉

[@gsnovato_autotech]

We all do Brad. Even you otherwise u wouldnt be watching lol

[@hoodedgood]

and your o2 sensor threaders, I made those with grade 8/ metric 10 bolts like 10 years ago. Totally worth it, if they are only a few bucks.

[@jasonpollard7157]

I would say that Milton is the leader in air transfer tools...... There pretty heavy duty and can withstand impact great.... I ran over my air chuck with a john Deere 333g posi track and it did not hurt it a bit.

[@ValleyCityAutoYT]

Jason Pollard Jesus! Lol good to know!

[@terrellscaife2411]

Awesome tool hall thanks for the tire recommendations I’m just a casual DYI but I do get into big repairs work on everything from generators on up to big trucks

[@ValleyCityAutoYT]

TERRELL SCAIFE Hell yea!

[@russelldainack595]

The color of your box is sweet man love that combat green

[@ValleyCityAutoYT]

Russell Dainack Thank you!

[@i000iii0i0i]

👍🏻 some repair content would be sick

[@ValleyCityAutoYT]

Tanner Sousa I am currently working with our legal department to determine how much and what I can show. Not sure when I will have an answer yet.

[@terrellscaife2411]

Yes highly recommend the OTC 5190A and 7490 Heavy duty U joint puller

[@ValleyCityAutoYT]

TERRELL SCAIFE Thank you! I know Tiger Tools also makes some good stuff.

[@alvarogonzalez3676]

Christian can you do a video on your computer setup and if you use it to keep track of jobs, job times, and work orders, what’s the best way for you to keep track of all that stuff?

[@ValleyCityAutoYT]

Alvaro Gonzalez Sure I could do that.

[@SawyerSmoak]

Keep us updated on those magnetic extension adapters. I’m really interested in picking those up from my local dealer.

[@ValleyCityAutoYT]

Sawyer Smoak Absolutely!

[@mikescot7187]

I picked up the loadpro, i'm happy with it.

[@gsnovato_autotech]

Matco makes magnets that you install inside your sockets yourself. Hope that helps

[@eternalmaddness]

Great vid and great tool haul brother, only problem with impact torx is that they’re soft and they round off

[@ValleyCityAutoYT]

Luis TheTruest Yea I wanna give them a shot. Do you have them?

[@eternalmaddness]

I don’t have that set. I picked up a set of impact torx, hex and triple squares off the Mac truck. The small bits get ruined easily

[@matolittleelkwells5377]

Great video brotha keep rollin those cameras and doing what you do always good to see heavy line tech point of view reviews just subscribed to your channel

[@ValleyCityAutoYT]

mato little elk wells Thank you!

[@terrellscaife2411]

Hey bud I just picked up the Proto Fuel injection test kit Part number JFP810B👍

[@kenmerritt6206]

I like your videos. You sound like Dr. Phil.

[@knasasduckkiller]

GP makes magnetic 12 point sockets. Very reasonably priced very good quality for a higher end tiwanees tool:

[@ValleyCityAutoYT]

trent miley Awesome imma check that out!

[@knasasduckkiller]

My service truck 99% are GP and I abuse the crappy out of them and they hold up

[@nicabatemarco5505]

Cornwell has a magnet that fits into sockets to make them magnetic sockets if that coukd work for those transmissions

[@ValleyCityAutoYT]

the neighbourhood Mechanic not a bad idea. I will look into it.

[@seansloan3762]

I didn't know that impacts sockets are softer. I should think about picking up a set, might save me

[@ValleyCityAutoYT]

Sean Sloan Hell yea man!

[@stuffnwords]

Lovin the content man. Keep it up!

[@ValleyCityAutoYT]

stuffnwords Thank you!

[@TMan4897]

I have saved hundreds and hundreds by buying tools on amazon.

[@ValleyCityAutoYT]

Justice4x4Yall Absolutely!

[@Metalstorm56]

Koon trucking did a review on magnets that fit down into sockets that he mentioned that work great for transmission work

[@ValleyCityAutoYT]

Metalstorm56 Thank you for the recommendation!

[@WalmartBiker]

I would have gotten a longer hose for the large bore

[@brandong1990]

They make socket inserts that are magnetic they look like a 6-point nut but they're very thin and have a magnet on them you could try that

[@Vickvineager]

Brandon Gordon I got both metric & sae sets. They are definitely worth every penny.

[@terrellscaife2411]

Buddy I just picked up the Milton industries 556 And it comes standard with a locking end on it With a 6 foot Hose

[@ValleyCityAutoYT]

TERRELL SCAIFE Good to know!

[@edwardjames6837]

Excellent video I was interested in the flexible magnet where did you get it from if I can ask you this I would love to get one for the same reason you stated thanks Ed James

[@ValleyCityAutoYT]

Edward James the link is in the description.

[@scottjohnson3226]

Good stuff! Thanks for sharing.

[@EETechs]

How many hours are you guys getting on those 3-phase motor differential drive units for the D7E and DX6E before the motor or the differential gear parts fails? A great tool that I use to trace down wires that are missing numbers or looking for open circuits in wires is the Fluke PRO3000F60 Tone & Probe Kit. Man I can not tell how many times this tool has helped me locate an open circuit in a wire that looks perfectly normal on the outside, but has a clean break inside, or trace down a long wire from connector to connector that had its number markings rubbed off from oil being soaked on it.

[@ValleyCityAutoYT]

EETechs I haven’t seen either of those repairs yet. Pretty minor work on them so far.

[@lukepaterson7326]

I have the whole set of magnetic extensions from MAC, they have I think 3 sizes in 1/4, 3/8, and 1/2” only $100 in the flyer right now

[@ValleyCityAutoYT]

Luke Paterson I seen those.

[@dhoskins9]

Sunex makes 1/4 drive magnetic set 12 pt

[@johngibson3594]

Be great if some one made a magnet that you could turn off until you get it where u want it as the get stuck on stuff when you don’t want them to

[@ValleyCityAutoYT]

John Gibson I hear you man! Lol it can suck!

[@jrgenopsetmyren6078]

Nice video, keep up the good work! :D

[@ValleyCityAutoYT]

Jørgen Opsetmyren Thank you!

[@tommater2724]

Check out the Milton s-580e kit bad ass gauge as well. Is that a liquid filled gauge on that one you have?

[@ValleyCityAutoYT]

Tom Mater Yes it is liquid filled.

[@TylerCox.]

Can you make a video about how you got started in the trade? And the school/certification you need to get started? I’ve been a heavy equipment mechanic in the Marines for 4 years now and I’m going back to civilian life here soon. I really would like to continue being a heavy equipment mechanic any advice or information is greatly appreciated 🙏

[@ValleyCityAutoYT]

Tyler cox Absolutely I have plans to work on one.

[@johnb1121]

Sunex 1825 1/4-Inch Drive Universal Magnetic Impact Socket Set, Metric, 12-Point, Cr-Mo, 5mm - 15mm, 11-Piece

[@michaellopez968]

Hy man more videos 🤘🤙🤙

[@alexsbbq1585]

if you go on the snap on truck I bought magnetic sockets from them not cheap but they sell them also you can us this hack take a small magnet and epoxy it into the socket all the way inside they also sell those magnetic plactic things that shove into the socket pretty user friendly I belive you can find them on amazon or harborfrieght

[@jfkcamp1]

👍👍👍great job on this vid!

[@ValleyCityAutoYT]

John J Thank you!

[@musahawkins8765]

This is old but you should check out Koren nutgrip sockets not sure if they have 12pt but nicer than magnet setuo

[@levijasperson3457]

Sunex makes some as well

[@kylegoodyear8782]

My Mac guy has magnetic 12 point sockets, i could get the part number when he comes back

[@ValleyCityAutoYT]

Kyle Goodyear Sweet thanks!

[@jjake1991]

I know your not a fan of matco but they carry a lot of magnetic sockets maybe worth looking into.

[@ValleyCityAutoYT]

jacob halstead I am pretty sure Sunex makes all of them. But regardless we don’t have a Matco guy currently. Thanks tho.

[@_360_second_gen__7]

I know my Matco guy has magnetic sockets. I don't know if its 6 point or 12 point

[@chrism6080]

Matco adv makes 12pt magnet sockets

[@ValleyCityAutoYT]

Chris M I will check them out.

[@coreysuttles1362]

Great video and if you could please get me a parts list for that pressure tester I would greatly appreciate it, I work on class 8 so it would be awesome to have

[@ValleyCityAutoYT]

Corey Suttles Stant 12704 Cooling System Pressure Tester Replacement Hose and Head Kit www.amazon.com/dp/B000GTIJOE/ref=cm_sw_r_cp_api_i_hxMlEb5VAZ6YG NANPU LR-1/4 Mini Air Regulator with Steel-Protected Gauge 1/4" NPT, 60-SCFM 230Psi www.amazon.com/dp/B07SJYMTQT/ref=cm_sw_r_cp_api_i_gyMlEbYYER8EN PIC Gauge 202L-204D 2" Dial, 0/60 psi Range, 1/4" Male NPT Connection Size, Center Back Mount Glycerine Filled Pressure Gauge with a Stainless Steel Case, Brass Internals, Stainless Steel Bezel, and Polycarbonate Lens www.amazon.com/dp/B00FBKZIRE/ref=cm_sw_r_cp_api_i_qzMlEb9PD7PEJ Lead-Free Forged Brass In-Line Ball Shut Off Valve, Quarter Turn, 1/4" Male NPT (MNPT) X 1/4" Female NPT (FNPT) www.amazon.com/dp/B07DHTR486/ref=cm_sw_r_cp_api_i_jAMlEbJV7YQZW

[@F1NATIK]

Yeap i feel ya with chrome sockets on impacts, Bloody apprentice has fucked 3 of my chrome sockets this week putting them on impact guns after i told him to not do that. I was pissed because it was the first socket set i bought when i was a apprentice 14 years ago,

[@ValleyCityAutoYT]

F1NATiK lol gotta teach em, the smallest details make a difference!

[@DavidWilliams-ly1rm]

Can you provide the part numbers for the adapters you use for your Stant adapted cooling system pressure tester? Just the adapters that go between the tool and the machine radiator. Thank you

[@ValleyCityAutoYT]

David Williams Stant 12450 Cooling System Tester Adapter www.amazon.com/dp/B000HAXF1O/ref=cm_sw_r_cp_api_i_iDslEbP638VHD

[@DavidWilliams-ly1rm]

@@ValleyCityAutoYT Exactly what I needed. Thank you

[@billwestphal1421]

Do they give a tool allowance by chance?

[@ValleyCityAutoYT]

Bill Westphal No.

[@aok6113]

Stuff some paper in your socket until you find those magnetic sockets

[@ValleyCityAutoYT]

Aok Eh, I don’t want to chance dropping anything in the trans planetary.

[@aok6113]

That’s why you bought your fancy magnet

[@Kryllzors]

Good video man. Keep it up✌

[@Smennyboy]

Air filler looks nice, but shouldn't it have a much longer hose for heavy equipment? A mechanic around here died a few years ago from an exploding wheel loader tire. They say there were hardly anything left of him. No joke when those big tires go boom

[@bradmiller3391]

With the sunex tools you get what's your easiest and quickest way to get them warranted?

[@ValleyCityAutoYT]

Brad Miller I have never had to actually warranty a Sunex tool. But I have dealt with their customer service in order to get a replacement when I received a double size in a socket kit I got. Their customer service was top-notch so I would suggest going right through them.

[@johnb1121]

Sunex makes them in impact sockets 12 point....

[@jasonpollard7157]

I havent sent the 12pt mag sockets if there is a set do you have a part number.... I have the 6pt

[@johnb1121]

@@jasonpollard7157 Sunex 1825 1/4-Inch Drive Universal Magnetic Impact Socket Set, Metric, 12-Point, Cr-Mo, 5mm - 15mm, 11-Piece

[@phillipchambers8487]

@ Chritian Beyer, see my comment below with Sunex Part # 1820 these are 12 point Magnetic Impacts in 1/4" 36 dollars for the Set. I'm assuming that since you said most of the Bolts in that Planetary are 5/16" that you would want them in 1/4" drive.

[@phillipchambers8487]

Christian, here are some more Parts #'s for you: 1. Sunex # 1830 (Amazon), 1/4" drive SAE Deep Magnetic Impact Socket Set $76.98 2. Sunex # 1825 (Amazon) 1/4" drive Metric Universal Magnetic Impact Sock Set $113.01 I think I'm gonna order all of these Sets myself. I probably have one of the most complete 1/4" drive set of Tools in the world, but I don't have Magnetic Impacts, so low I am gonna add to the collection. I love 1/4" drive stuff, even though I mostly work on big shit. There are always little nuts and bolts on Big Equipment though, and usually in tough to get to places.

[@ValleyCityAutoYT]

Phillip Chambers Thanks. I’m looking for the 12pt. Not the 6 pt.

[@phillipchambers8487]

@@ValleyCityAutoYT Those are 12 point

[@phillipchambers8487]

The 1st Part # I sent you is 12 point Sunex # 1820

[@phillipchambers8487]

Sorry, I was incorrect! The Metric Swivels are 12 point but the SAE I sent you are 6 points. I will call my Buddy at Sunex tomorrow,and see if I can find a correct part # for a 12 point set that are Magnetic.

[@thosethickstrings]

Does your company reimburse you for all these tools/ tool box?

[@ValleyCityAutoYT]

thosethickstrings Haha I wish.

[@Laughlin326]

How do u like working for fabick cat I was considering transfering there from altorfer in chicago area

[@ValleyCityAutoYT]

dan laughlin I love my job. I like who I work with and for.

[@Laughlin326]

@@ValleyCityAutoYT is it a good work environment and are us guys union at fabick? And if u are what union.... are you guys guaranteed 40 hr work weeks?

[@ValleyCityAutoYT]

dan laughlin No, we are not union. But fair because a very good company and treats us very well. There is no guarantee for 40 hours but there’s only been one three-month period where we went to a 32 hour weeks in the last five years. Other than that in the shop I personally work at as long as the workload is there I work overtime as I please. Some weeks I hit 75 hours a week other weeks I hit 45 hours a week.

[@williswoodproducts]

What do you use to organize your wrenches?

[@alexfranco5831]

Ever need a T70 or larger in heavy equipment?

[@ValleyCityAutoYT]

Alex Franco no, I’ve never needed a T70.

[@joshuapeaker]

In the uk we use t70 on Scania front disc bolts, and they’re on Subaru diff fill/drain plugs

[@hoodedgood]

Magnetize your own?

[@ValleyCityAutoYT]

C White A few people mentioned it.

[@butcharmstrong9645]

woof hansom bearman

[@trucksandcars3237]

New sub 👍👍👍

[@ValleyCityAutoYT]

Trucks and cars Thank you!

[@rosswade5958]

What cooling system adapter do you use for CAT cooling systems that have threaded caps?

[@knasasduckkiller]

Ross Wade I can get ya the part number off my matco one tomorrow. Don’t know it off the top of my head right now

[@rosswade5958]

@@knasasduckkiller Ok. I'd appreciate it if you would.

[@nealk6387]

Watch Dan's video on the load pro. KZbin Dan Sullivan electrical. I use these all the time. You wont be disappointed. Cat has given the loadpro their own part number so has Volvo and ups.

[@phillipchambers8487]

Sunex Part # 1820 1/4" SAE Magnetic Impact Socket Set on Amazon for $36 bucks

[@essentialdiecast6405]

Genuine question, what are the best brands of jeans?

[@thosethickstrings]

Lulu lemon

[@ValleyCityAutoYT]

Essential Diecast lol random but I personally just wear the Wrangler flex jeans from Walmart.

[@lukepaterson7326]

Essential Diecast duluth trading company, best for working in, but quite spendt

[@chriskeith8468]

Check out Cornwell am I have something

[@michaellopez968]

Am in a diesel tech school right and having trouble understanding how fuel systems works and how the fuel flows and gets clean numerous times and how all the functions works in the fuel system have any advice? Know any special websites that help with videos or some things it's alot of info tbh

[@greatmindof1201]

Michael Lopez yes, look up I think its amsoil diesel fuel filter they have a complete system that helps you look at all components and what they do in the fuel cycle

[@samhoh7670]

Ask your teacher

[@lachlantheking1335]

Firstly

[@erikbrown8453]

Make more videos

[@ValleyCityAutoYT]

Erik Brown Trying to work some things out with the company to get some guidelines for content creation. Bit of a slow process with the size of the company so thank you for baring with me.

[@hohonator]

You look like you're gaining weight man, you ok?

[@ValleyCityAutoYT]

Seth Ambort Eating like shit tends to do that. Lol But nah I’m all right. Been htting the gym more consistently the last couple weeks.

[@oldroywilson8564]

Winter bulking myself!