Taking out BIG DENTS with PDR! | No Filler & No Paint

[@1st_track_dents]

Hey, hope everyone is well. This is a repair that I filmed and edited last summer 2020, I just managed to finish fine tuning it, I hope you enjoy it! Looking forward to getting back and recording new content soon!

[@timtrainer10]

Hey I really enjoy your work but in your videos you never tell us how long each repair took you which would be awesome if you could tell us please. So how long did this repair that the guy only wanted to pay for three hours of labor take you thank you your friend from Chicago Illinois

[@dreamredline68]

@Willem Beek I did one myself and i spent 2 hours, charge about 30 euros an hour, Edit: Its much cheaper than painting keep that in mind

[@1st_track_dents]

@@timtrainer10 Hi Tim, you must have missed it as this is the first video that I actually did put the time taken in to do this repair, at the beginning, during at different intervals and at the end, check out this part of the video to see the time taken kzbin.info/www/bejne/j6bIfquNrq-chNU I have put it on my last video too and will try and do the same for all new videos. Thanks for watching!

[@88_4Runner]

I would love to be this man's apprentice. Pure art work.

[@vaughanwaters]

Nice work and nice have you back. Greetings from an English man in Germany

[@1st_track_dents]

Thanks, always great to hear from my overseas viewers, have a great weekend! 👍

[@robf7008]

I cannot believe the amount of talent. Sure it's training and hard work, but you are extremely talented. A gift for sure. Thanks for sharing.

[@1st_track_dents]

Thank you so much! 😀

[@TOTTLIVE]

Hello Jake! I love the fact the you are including the time that takes you for the repair. When it comes to getting paid for your skill time is crucial. Keep it up!

[@1st_track_dents]

Thanks, yes I get a lot of people asking how long these repairs take, so I thought it would be good to put a counter up, although this is still an estimation as I have to take the time off for moving the camera around, stopping for phone calls etc, but I think it is fairly accurate. 👍

[@mercedes_and_more]

@@1st_track_dents really appreciated as i was one of those who asked 👍

[@fasttrackblastback8286]

How much do you charge per hour?

[@woodchuck243]

Always a great pleasure to watch you in action another great job keep them coming I can't wait for the next one

[@1st_track_dents]

Thanks Woodchuck, I have another one coming soon which is an old repair filmed many years ago that I am trying to re-edit. Trying my best to keep some content coming even though I am not back working yet. Have a great weekend 👍

[@woodchuck243]

@@1st_track_dents glad you're getting better

[@alandavis6429]

You are a true artistic genius.

[@1st_track_dents]

Thanks Alan! 👍

[@andrewpage4464]

You must be one of the best PDR Engineers out there great work ATB

[@1st_track_dents]

Thanks Andrew! 👍

[@thefunkyt]

Glad your back!!! Long time watcher never commented, seen all your videos and some more then a few times. Appreciate your work and sharing. I am the PDR tech at the Kentucky Ford Truck Plant where we build the aluminum body Super-duty. Aluminum was new to us so it was trial and error which I found you via that.

[@1st_track_dents]

Thanks for watching and for your comment. Yes, Aluminum is a whole different ball game and becoming so much more popular in vehicle manufacturing. Loving those new Ford trucks rolling off the production line, not sure if we will see any over here in the UK, our roads are tiny lol 😂

[@1conu593]

Omg Jake… I think your skills are beyond everything ! Every tap you make seems so accurate and you make it looks so easy but deep down we all know, you got this from years of experience working on countless cars… haha i’m sure the dents are talking to you !

[@1st_track_dents]

Thanks! Yes, you're right, I've probably removed thousands of dents in my time, they don't talk to me although, I do communicate with them through morse code with all that tapping 😂

[@MH-on8ol]

Typical quality video and explanation of the repair. I learn every time I watch your videos. I struggle to understand why persons would down vote this as it was very well done. Cheers

[@1st_track_dents]

Thanks, yes there was quite a lot to cover in this one 👍👍

[@Bewareofthedog69]

Excellent work & result as expected Jake 👍

[@1st_track_dents]

Thanks! 😉

[@MSN-82]

If you ask me if this part of the car was previously repaired, I'd say never!! The work of repair is just a fine art in it self. Big salute to you mate from Saudi Arabia 🙋

[@1st_track_dents]

Big salute to you too, thanks for watching from Saudi Arabia ☺

[@rodp2310]

The maestro is back. Great work Jake. 👏👏

[@1st_track_dents]

Thanks Rod 👍

[@ИраИра-ы4х]

Побольше видео с работами, каждый раз смотрю с нетерпением и жду новых работ, очень высокий уровень.

[@1st_track_dents]

Спасибо за просмотр, я с нетерпением жду возможности скоро принести вам еще несколько видео! 😉

[@N-Scale]

Glad to see you back and doing amazing work!!!

[@1st_track_dents]

Thanks Mike, I actually repaired this last summer 2020, I just never got around to finishing the edit, thanks for watching 👍

[@N-Scale]

@@1st_track_dents Matters not. Still good to see you and fabulous work you do. Mike

[@1st_track_dents]

@@N-Scale 👍

[@ckane510]

The master at work. Fantastic job!

[@1st_track_dents]

Thanks Curtis, really appreciate your comment 👍

[@GoUSA111]

Only just published and already 1stTD has 1 competitor who has stopped by to express displeasure that work they refused due to 'too much to take on' was repaired to perfection while making it look as 'simple' to do as falling off a stool at the pub. Brilliant

[@1st_track_dents]

Ha ha, great comment! As someone who puts content out there, these things are to be expected 😂

[@NotSoHappyEnding]

Great commercial for glexo. I love that stuff. Amazing repair bro.

[@1st_track_dents]

Yes it's a great time saver! 👍

[@CA-pv5ie]

Wow - what great work Jake! Awesome to watch a true master. PLUS it looks like you have a full production crew putting these videos together - Crazy good quality! Thank you!

[@1st_track_dents]

Thanks! ....Man I wish I had a full production crew, it's just me, my old iphone and many long hours sitting at my desk using my editing software, luckily this one was recorded and edited last year, I just had to tweak a couple of bits. Just shows what you can achieve with very little equipment and manpower 😁

[@CA-pv5ie]

@@1st_track_dents Wow, your efforts a sooo appreciated. All the best

[@1st_track_dents]

@@CA-pv5ie Thanks!

[@70stastic]

Excellent video as always. Before I started watching this channel, I had no idea that dents like that could be smoothed out without fillers or panel replacement.

[@1st_track_dents]

Thanks Paul, yes it's amazing what Paintless Dent Removal can achieve these days, there are still so many people that don't know it even exists. Luckily though, there are many great tech's showing their work online these days, so hopefully more and more people will see the benefit of using this method. 👍

[@lukeoverington3901]

So true, neither did I - I always wished/wondered if it could be done. After seeing Jake and his techniques - they have come on so much since the hammer and dolly! So inspiring! 👍😎

[@tridaks]

Good to see you back posting videos, wondered what happened to one of my regular views. All the best.

[@1st_track_dents]

Thanks!

[@gangleri_0181]

Your skill and knowledge is impressive.

[@1st_track_dents]

Thank you very much 👍

[@gavinoliver8074]

He's back!!!! So glad to see you working your magic again Jake. Welcome back, wishing you well. Gavin.

[@1st_track_dents]

Thanks Gavin, this is an old video from last year, but I am working hard on trying to get back repairing and recording new videos soon. 👍

[@gavinoliver8074]

@@1st_track_dents No rush at all Jake. Get well first, this thing can wait mate. Have a great week.

[@1st_track_dents]

Thanks Gavin, all the best to you 👍

[@thetruthserum2816]

the best PDR channel...

[@jamesyday72]

Fantastic repair Jake

[@1st_track_dents]

Thank you! 👍

[@stevenbell482]

Your BACK!!! Finally, so nice to see you again! As always you did an amazing job. Greets

[@1st_track_dents]

Thanks Steven! 👍

[@Saidmagomedgadzhi]

Недавно начал заниматься эти делом, но смотрю вас достаточно давно, не все понимаю на английском, но язык PDR для всех один, поэтому основу уловить получается😁. Спасибо за ваши труды🖐🏻

[@1st_track_dents]

Спасибо! Если вы смотрите на компьютере, вы можете использовать функцию «Автоперевод», и, надеюсь, вы получите русские субтитры. Спасибо за ваше сообщение, и я буду вам много успеха! 👍👍👍

[@danielvanderveken5127]

Again, great job. Nice to see you are back

[@1st_track_dents]

Thanks Daniel, yes it's nice to upload a normal repair video again! 👍

[@georgegrierson]

Awesome to see you again Jake... Your videos are always top of the line and professional. Watching your videos is like seeing an old friend at work...

[@1st_track_dents]

Thanks George, that's a really nice thing to say, have a great weekend! 👍

[@adamhoneybun1166]

Hi Jake good to see you back great video we’ll explained 👍

[@1st_track_dents]

Thanks Adam! 😉

[@mykeready3742]

Wow Jake. Yet another unbelievable repair. So impressive. Thank you so much for taking the time to make these videos. So pleased you’re back. 👍🏻👍🏻

[@1st_track_dents]

Thanks Myke, yes, this was a very tricky one to do, but I was very pleased with how it turned out 👍

[@ЛевВергайкин]

Наконец то новое видео,как всегда все супер ,с нетерпением жду новых работ.

[@1st_track_dents]

Спасибо, что заглянули и посмотрели мое видео!

[@jacomatos9592]

Great job! Show!

[@1st_track_dents]

Thanks Jaco 👍

[@BilalBilal-gy6dg]

Great work as usual. Welcome back Jake. Missed you so much. ❤️❤️❤️

[@1st_track_dents]

Thanks, I've really missed uploading content 👍

[@youngreillytwo]

Another Awesome video and a Bloody Brilliant repair!

[@1st_track_dents]

Thanks!

[@franciscoramos226]

Hey Jake, it's great to see you back in action. Excellent video and fantastic repair as always. Cheers!

[@1st_track_dents]

Hey Francisco, great to hear from you again, yes It's been a while. This was an old video that I repaired and edited last summer but never uploaded, I'm just trying to keep my subscribers entertained until I can get back working again, I hope you are keeping well 😉

[@franciscoramos226]

Many thanks, my friend, things are well over here and hope you're well too but ....you "can back working"? What happened to you? Have you been ill, Jake?

[@1st_track_dents]

@@franciscoramos226 Yes, it's been a very bad year for me, a bit too long to explain on here, but I'm slowly trying to recover and get back to where I left off! Glad things are going well over there 👍

[@franciscoramos226]

I'm so sorry to hear that and I understand you. Wishing you strength and all the best from now on. Take care, Jake! ❤🍀🍀🍀🍀

[@1st_track_dents]

@@franciscoramos226 Thanks 😎

[@jpanyk]

Nice to see you again

[@1st_track_dents]

Thanks, great to be posting again, even though it is an old video from the summer of 2020 👍

[@SDJSound]

Always impressive work... enjoyable

[@1st_track_dents]

Thank you! 👍

[@ElecktroChiva]

Can you make a video on giving tips on knocking down the crowns? 🙏🏽

[@1st_track_dents]

When I am back working I will certainly consider it yes.

[@germanachaval1330]

Excelente amigo cómo siempre.saludos desde España

[@1st_track_dents]

Muchas gracias!

[@lukeoverington3901]

Hey Jake, great to see the master at work again. The timer and the breakdown of the work is great, we can really appreciate what it takes - you make it look so quick and easy! What an art! Praying you'll be back soon - we're all behind you. Can't wait for your next video. Keep up the awesome work! 👍😎

[@1st_track_dents]

Thanks Luke, yes it certainly takes a lot more time editing adding these extra features in but I think the end result is worth it. Hopefully have another video coming shortly 👍

[@lukeoverington3901]

@@1st_track_dents Thanks Jake, it's definitely worth it. Thank you so much for taking the time to reply. Your attention to detail is second to none. Do you do or have you thought of ever offering masterclasses? Take care, wishing you all the best.

[@1st_track_dents]

@@lukeoverington3901 Thanks, I haven't yet but who knows what the future will bring!

[@omaralihasan8187]

Very nice job, I realy enjoy watching yor videos.

[@1st_track_dents]

Thank you Omar, I really enjoy making these videos and have been missing uploading content 👍

[@billramsey800]

Hey Jake away for some rest and relaxation north of WA on the ningaloo reef so struggling for reception but just managed to catch the latest video well excellent 👍

[@1st_track_dents]

Thanks Bill, I hope you are well. Enjoy your rest & relaxation, I spent a day at Ningaloo Reef in 2008 snorkling with the whale sharks! whilst travelling from Perth To Broome. Out of the 3 months I spent in Australia this trip was my favourite, such a beautiful part of the world 👍

[@АлексейАнатольевич-ф2о]

Отличная работа! Ждём ещё!

[@1st_track_dents]

Спасибо за ваш добрый комментарий!

[@kimspeller5379]

good to see you back ! :)

[@1st_track_dents]

Thank you Kim! 👍

[@kalibygomes3443]

I love your job, congratulations.

[@1st_track_dents]

Thank you so much! ☺

[@peterjdo]

Always amazing work 😎👍

[@1st_track_dents]

Thanks Peter! 😉

[@ianbaker3819]

Fantastic work as alway Jake, you are a magician of metal 😀

[@1st_track_dents]

Thanks Ian, this metal did not want to play ball at first 👍

[@isalmankhan1]

Great to hear from you brother, I hope & pray for your rapid recovery & seeing you back in action soon, we all miss you on KZbin😍 This one is amazing👍 Stay Safe👍

[@1st_track_dents]

Thanks Salman for your kind words, yes I'm trying to find some videos to post to fill in the gap until I can get back working again. Luckily this was filmed and edited last summer, I just had to tweak a few bits. Hopefully things are moving in the right direction now. More coming very soon 👍

[@malcsurfleet3888]

Fantastic job,!

[@1st_track_dents]

Thank you 👍

[@jeffreysouthflorida7008]

Terrific job!

[@1st_track_dents]

Thanks Jeremy, hope you are well 👍

[@jrcflaus]

Excellent work as usual!

[@VeekAtanees8830]

Welcome back. Great work

[@1st_track_dents]

Thanks Jonathan! 😉

[@freddyalejandrosayagomoren6094]

hello greetings master Jake, definitely thank you very much for sharing these wonderful videos with such valuable content, congratulations on your 100K blessings

[@1st_track_dents]

Thank you for your kind words Freddy 😉

[@fatihyildirim7321]

Kıymetli dostum. Ellerine sağlık, harikasın.

[@1st_track_dents]

Çok naziksiniz teşekkür ederim!

[@avadhootkochikar6107]

Awesome!!! Good work!! Cheers!

[@1st_track_dents]

Thanks!

[@igotaction]

Welcome back!!!

[@1st_track_dents]

Thanks Joel, this is an old repair from last year, but really itching to get back out there again soon! 👍

[@robdrinks8395]

Are you sure your name isn't Michaelangelo? You most certainly have a gift sir. I hope I can come close to pushing out the dints of my car like you did these. The electric gate closed on me while I was trying to get through.... It looks pretty nasty. Got some paint damage as well. Do you have any videos on patching up paint damage? Maybe buffing and adding some polishes will help but it looks pretty scraped up I'm probably going to have to touch it up with some paint.

[@TheToto4562]

How long did the repair take?

[@1st_track_dents]

It took just over 3 hours 👍 - kzbin.info/www/bejne/j6bIfquNrq-chNU

[@TheToto4562]

@@1st_track_dents so. I'm curious what did you charge??? Because here in Canada 3 hour job. I should charge 5 to 600 dollars minimum. It's cheaper to replace and repaint the fender. Especially if it's an inexpensive vehicle

[@1st_track_dents]

@@TheToto4562 Yes I understand what you are saying, that's where common sense has to play a part. I am not sure what other companies would have charged for this, maybe around what you said. This customer was a good regular customer of mine and to be honest he didn't like this car and was just going to leave it, so I did him a really good deal as I said I would make a video out of it, therefore I would hopefully claw some of that loss back in a trickle of KZbin revenue, although this is always a gamble and doesn’t always work and I have often ended up losing out! It was done last year and from what I can remember it was less than 400 Canadian dollars

[@TheToto4562]

@@1st_track_dents ok. Thank you for the reply.

[@abudabidibibudi]

Mr Doctor Respect from Montenegro !

[@1st_track_dents]

Thank you for watching! Greetings from the UK 👍

[@davidthompson4925]

Hope you a feeling better another great video as usual I am a pdr tech also always trying to learn and get better you definitely help with that thanks and can't wait to you are back at it full time again.

[@1st_track_dents]

Thanks David, that's great to hear, I hope you have plenty of work, I hope to get back real soon! 👍

[@bigchopper14]

Really amazing

[@1st_track_dents]

Thanks! 👍

[@marksweetman8765]

Top job as always 👍🏼

[@1st_track_dents]

Thanks Mark 👍

[@saulruiz9467]

Man i wish you were local to work on my cars. Great video!

[@1st_track_dents]

Thanks Saul, I'm sure there will be someone good locally who can help 👍

[@IfInDoubt..]

Pleased to see another video from you - I think I started following your channel on my old account just after you uploaded your second last video and found you the best PDR tech to watch on here, then you vanished! Hope you're back on form again very soon.

[@1st_track_dents]

Thanks for your support, yes it's been a very challenging couple of years with one thing and another, I hope to get back working soon 👍

[@mercedes_and_more]

He's back!👏🔥🔥🔥

[@1st_track_dents]

Almost...Thanks!

[@ravindraasutar1771]

Your videos are worth learning from 🙏🙏🙏

[@1st_track_dents]

Thank You 👍

[@LearnPDROnline]

Great video Jake and great Repair as always I hope you're doing well mate 👍

[@1st_track_dents]

Thanks again Tom, hope you are staying safe out there. 😉

[@moscone1982]

Hi Jake. Thanks for the video. You are the master. It would take me 3 days do get it done (beginner) hehe. All the best from Poland and waiting for more videos.

[@1st_track_dents]

Thanks! we all have to start somewhere, quality and accuracy have to come first and then slowly you get quicker at doing these repairs, and then you sometimes switch off and go on auto pilot lol 😃

[@moscone1982]

@@1st_track_dents All those you just mentioned are my goals 😊. Thanks

[@1st_track_dents]

@@moscone1982 I have no doubt you will achieve them all, good luck 👍

[@ronaldkabina9065]

Great work Man👌

[@1st_track_dents]

Appreciate you watching, thanks 👍

[@ErikYañez-z2z]

como se llama ese pegamento ? gracias por el video ¡¡ aprendo mucho

[@germanachaval1330]

Muy buen video amigo y excelente trabajo..dónde podría comprar esas herramientas?.. gracias y saludos desde España

[@1st_track_dents]

Gracias, todas estas herramientas se compran a muchos fabricantes diferentes, si me envía un correo electrónico a 1sttrackdents.co.uk, puedo darle una lista de los proveedores que utilizo 👍

[@earlbartlett4699]

Great to see you back putting out your great work. Just recently liked and subscribed to your channel. Son bought a car with a few small dings ,now I have a excuse to try my hand at it 🤣. Thanks and as always... Great work.

[@1st_track_dents]

Thanks Earl, good luck!

[@LuisHernandez-bz5en]

Nice 👍 well done 🛠🛠🛠🛠🛠

[@1st_track_dents]

Thanks Luke 👍

[@aaronaguayo6341]

Exelenttttt 👍 eres el mejor amigo

[@1st_track_dents]

Muchas gracias!

[@billcui7827]

thank Jake I love your every sigle job. I thought use large rubber tips and heat push instead glexo cool glue can be faster and got more contral. maybe I am wrong please dont worry about it.

[@1st_track_dents]

Hey Bill, thanks for watching, yes I could have just gone in behind with the rubber tip , I thought the Glexo would bring most of it out but it was being a pain because the metal was very flimsy, either way would have worked really. 👍

[@badjazz271]

Jake do you have a link to buy the rubber push and knockdown tips you used in this video. Thanks.

[@1st_track_dents]

Hi Aaron, no I bought a few hundred of each about 5 years ago from a company that is not trading anymore, but it seems no one really does these anymore, most tech's prefer the cherry caps now although I prefer the rubber and vinyl myself. You can take a look on TDN tools in the UK or PDR pro tools www.pdrprotools.co.uk/ Let me know if you find anyone who does the rubber and plastic vinyl tips as I only have a handful left myself now.

[@Rogerjones44194]

Welcome back 😉

[@1st_track_dents]

Thanks Jon, this is an old repair from last summer, just trying to find some content to fill the gap until I can return. 👍

[@gpmartelinhodeouro5913]

Uaaauuu Great Job Man !! Conhratulations! I speeak from BRAZIL/ Amazon

[@1st_track_dents]

Sending you best wishes from the UK! 😍

[@borisjones2806]

Hello Jake I'm having trouble finding the cold glue you mentioned, can you please tell me the name of it. Thank you

[@1st_track_dents]

HI Boris, the brand I use is called Glexo cold Glue. 👍

[@damienmilas8337]

A master at work nice one mate you make it look so easy cheers 👍🦘🇦🇺

[@1st_track_dents]

Thanks Damien, this one was certainly challenging as the metal was very soft. 👍

[@nicoballini9005]

Complimenti !

[@ГригорийГавриш-е5и]

Огромное спасибо спасибо за ваши все видео. Давно смотрю на ваши работы и восхищаюсь. Не владею английским языком, но вы настолько подробно показываете свои работы, что становится всё понятно без знания языка. Благодаря вам начинаю осваивать это ремесло. Давно ждал новое видео и наконец дождался. Спасибо что вы есть. Жду новых видео. Привет из России.

[@1st_track_dents]

Большое спасибо за ваш комментарий, я очень ценю это. Если вы используете «Автоматический перевод», вы можете увидеть русские субтитры, которые, надеюсь, помогут. Я желаю вам удачи в изучении искусства PDR и надеюсь скоро принести вам еще много видео. С наилучшими пожеланиями из Англии! 👍

[@wesleylogan8330]

Nice repair man you really glassed it out! What tip were you using on your blending hammer if you don't mind me asking?

[@1st_track_dents]

Thanks Wesley, I was just using a standard rubber tip on the Aluminium hammer that I use, It's the tip that comes with the Ultra Dent Tip set: www.ultradenttools.com/products/a44-7-16-6-pc-tip-set-and-tip-holder?_pos=1&_sid=5430179c2&_ss=r Nothing fancy really just basic tools, thanks for watching!👍

[@Djazul3]

Where can I get the cold glue with the stick that you have that you’re using on this video

[@AdamAus85]

Man I hope I can find a pdr guy like you in the Brisbane/Toowoomba area. Got an Alfa Romeo 166 in the grigio doceacqua metallic that has dent under rhs tail light, lhs front door and the odd tiny dent on front wings. Paint is in excellent condition (bar the front bumper), so I feel it is definitely worth it. That, and it's a facelift 166.

[@1st_track_dents]

Hi Adam, well you're in luck, speak to Mike at www.ozdentpro.com.au/ I had another customer in Oz trying to find someone in Brisbane and he found Mike, it was a really tricky repair and I saw the results on his Facebook page. It came out great, I was chatting to him by email and he seems a really nice guy. Hopefully he can help you, tell him Jake from 1st Track Dents says Hi. 👍

[@sheerwillsurvival2064]

That’s cool stuff cold glue

[@edsonvitorio2354]

Voltou🤝

[@shaynefrancis5318]

I'm watching everything you do.... fantastic tutoring jay thanks so much. Iv been practicing small dints on my fridge that my teenager punched.... might use his bloody head for tapping down high crowns 🤣🤣

[@1st_track_dents]

Ha Ha, I get a lot of inquiries for those big American brushed Aluminium fridges, always being dented by the kids lol! 😂

[@shaynefrancis5318]

@@1st_track_dents I just wish it would work on his bedroom door..... the joy of autistic teenagers 🤣🤣

[@1st_track_dents]

@@shaynefrancis5318 Sounds like he keeps you on your toes Shayne! have a great weekend 👍

[@shaynefrancis5318]

@@1st_track_dents you to mate

[@edgarconde1026]

Excelente bro

[@1st_track_dents]

Thanks Edgar 👍

[@wasif4209211420]

hi jake i see your videos please upload more latest videos

[@badass1g]

Should post how much was charged for each repair so people know what to expect.

[@stich1960]

So do you work outside by choice or are large shops a little harder to come by over there? Here in the US there are some guys that will set up tents and work but usually that's when they're going out of town to chase hail. I haven't really seen very many people by choice work outside here

[@1st_track_dents]

I do like the freedom of being a mobile tech although trust me there are lots of days where I wish I were in a warm workshop, especially this time of year! Although with all the rising costs right now, not sure that will happen for a while. It would be great to rent a space for a day here and there but I can't find anywhere local to do this either. Most landlords here don't like to rent to anyone in the motor trade. 👍

[@DZ32100]

Hey Jack Bobby Zee here ! Haven't seen you in awhile I missed your videos

[@1st_track_dents]

Hey Bobby, yes lots been going on these past couple of years, hope you are keeping well 👍

[@sergaudi287]

Классно всё сделал👍✌️

[@1st_track_dents]

Спасибо! 👍

[@vadvalee]

Красавчик👍🔥

[@1st_track_dents]

😃

[@ifell3]

I love your work, I just want to go and kick my car now to practice. Have you done a tools of the trade video etc?

[@1st_track_dents]

Ha ha, you could also just park it at the local supermarket for 10 minutes and you would get the same result 😂 I haven't done a tools of the trade video yet, I put down in the description most of the common tools that I use, but I may do a tools video in the future 👍

[@ifell3]

@@1st_track_dents that is so true 😅

[@ridenfish39]

I’m addicted to these videos. Hopefully you create some new content

[@1st_track_dents]

Thanks! are you involved in this type of work or do you just find it fascinating?

[@ridenfish39]

@@1st_track_dents I’ve been wrapping cars for 20 years now. I want to get into something else. I watched a guy remove a nasty dent on my own car a few weeks ago and now I’m addicted.

[@anton-op8xy]

Hi could you please tell me where to buy the cold glue and what is the name of the glue, thanks. Anton

[@1st_track_dents]

Hi, the cold glue is from Glexo and can be bought in the UK at either PDRprootools.co.uk or Kecotabs.co.uk 👍👍