2-12" RF shallow subs in sealed truck box.

[@ditto_75]

I bet those thump good. Thanks for the video.

[@210Designs]

Yes they do! Very solid subs 👍🏽

[@IKESTERrocks]

Would love a box like that for my 4 door f150

[@PoppaTInstall]

Mane!!! That is some clean work bruh!

[@210Designs]

Thanks a lot man. Truck boxes are always a little tricky for me. Making sure there is enough clearance for sub flex and the magnet. 😁

[@ledmk2]

Nice build, cool flat subs

[@210Designs]

Yes sir! They definitely get the job done and doesn't need a lot of space to go it.

[@jasonmartes8955]

Great job! I have to do the same thing. Is there a calculation for the poly?

[@210Designs]

jason martes - Thanks man! Yea, 9”-12” port area per nt/cf. (3.14 x radius squared)

[@sanneh2]

im going out on a limb with 2 x 10" shallow subs in a sealed enclosure, like yours and am gonna use the advice you gave in your other video building 3x 10" with each it's own space, makes sense. I'm looking to get that quality bass sound, as opposed to spl loud bass thumping from my current ported tube 12" It does produce nice sustained bass, which I like, but the "kicks" are just too much and dont sound good to me. hope sealed 2x10" shallow will resolve this

[@210Designs]

deeper purpose - Nate Dogg/First We Pray 👍🏽

[@210Designs]

deeper purpose - That's awesome man 👍🏽 Sealed boxes will perform exactly as the requirements you listed. I run sealed in my current SUV. Performed great 💯 Sealed will give you great sq bass and low notes that aren't abusive, but carry very well. Good luck 👌🏾

[@masterblaster735]

very nice sir like always

[@madcook1936]

Awesome video

[@210Designs]

I appreciate that sir 👌🏾Finishing up on another one this week. It was a pretty straight forward sealed box build, for 2-8s. Thanks for the comment.

[@edwardtaylor2250]

I want to do something like that for my 2004 Nissan Titan

[@NatureBoyTC]

Great work bro

[@210Designs]

Appreciate it NatureBoyTC! Installed in his truck this evening. He immediately noticed a difference in the bass quality. Running a Prime1200.1 and with the subs facing up, the back seats now have mad flex👌🏾

[@NatureBoyTC]

That's some quality work... Clean clean install

[@JJonescaraudio1]

damn theres a sighting where the hell have you been....aint seen you since the singer alt install on the Volvo yeah that long ago????

[@JJonescaraudio1]

you already know what it is.....

[@lopezraa45]

Hi !! I need a box for my 2022 Tacoma TRD PRO. what are the measurements of the box

[@210Designs]

Hello, I’ll have to check my notes and see. What’s your email address?

[@210Designs]

Mr. Jones, I was just thinking the same thing about you man. When are going to get more if your ride a long vids bro? What's the status of the truck build blow through?

[@evinjensen3286]

What do you think about the skar vd series compared to these.

[@210Designs]

Evin Jensen - I base my subwoofer selection off price, build quality and customer service. RF is the truth, but price point is insane. I’d go with Skar’s SD line 👌🏾

[@Johnny747CB]

I know this video is old but are you still building boxes?

[@210Designs]

Johnny Meeks - Yessir

[@Johnny747CB]

@@210Designs ,well I have a 2019 Nissan frontier desert runner crewcab (4 doors)and need a box made.i haven't figured out what speakers to use but I know my space is very limited.do you have any recommendation on subs and a price range on the box?

[@210Designs]

Johnny Meeks - Truck boxes are very air space limited. Depending on what position you want the sub(s) facing. If front, most trucks are around 8-9” tall, so maybe 6-1/2” or 8” sub. If it’s down firing or facing up, you’ll need to consider a shallow mount or a sub that’s mounting depth will work. I’ve personally never built for that truck, so I’m not sure what the dimensions would be.

[@jontowers4841]

Do you think the l7t kicker worth it or can I get a good enough bang with these fosgates

[@210Designs]

jon towers - Based on the price point, RF all day 😆 I love Kicker, being from Oklahoma, but Deezamn.......those L7T subs are insanely priced.

[@porigense67]

What's the cubic air space

[@210Designs]

Zeta Assassin - Each chamber was right at .79 nt/cf after displacements.

[@rozcosmodernlife2098]

Nice job boss! I've been wanting to get into car audio and I was just wondering how did you get into it? Where would you recommend I start?

[@210Designs]

Rozco's Modern Life - I've been messing with these boxes, since I was in high school '95. I would recommend watching as many vids as you can and take notes. Take a little from each style and make it your own. That's what I do and learning something new, with every build. Make mistakes, learn from them and you'll get better. If your going to do this for side $, I'd invest in some good tools. Check out a few of my older vids and I show what tools I use and how 👍🏽 practice, practice, practice! Best of luck to you. *Also I use the12volt.com & reaudio.com/info/RE_box_calculator.php

[@210Designs]

Rozco's Modern Life - air you need any help, let me know. I'm not a pro, by I'll help anyway I can 👍🏽 [e-mail]

[@rozcosmodernlife2098]

Bj Hammon Aye thanks a lot man! Keep up the good work.

[@scottydntno]

@BJ Hammon, do you use Truck bed lining to finish boxes?

[@210Designs]

Kleo 84 - No, I never have. I might try it on my next personal build.

[@brandonmclaughlin9988]

Which is best down facing or up facing I'm building a sealed sub box for 2 12s with 60 40 rear seats.

[@210Designs]

brandon mclaughlin - I prefer up facing. Sub sound waves can travel through seat, rather than against the floor board.

[@promodmerc]

@@210Designs Are you able to build a larger (taller) enclosure by up firing?

[@210Designs]

@@promodmerc - I believe so, only be cause the bottom of the seats are hollow. They have fabric on the bottom, but you can push it up several more inches or even remove it if needed. If you like down fire enclosures, you can do the same. By extending the top of the enclosure (which is where the sub magnet will be) into the bottom of the seat, allowing more internal airspace and ability to us a sub, that has a deeper mounting depth 🤙🏾 Hope that information helps.

[@tysonhawkins887]

@BJ Hammon, I have 07 Dakota Crew cab with fold up seats. what will be the dimensions for a box for 2- 10" JL Audio shallow mount under the back seats? Also can I build a box or leave up to pros?

[@210Designs]

Tyson Hawkins - Great subs 👏🏽 As for the dimensions, I would need to know the measurements underneath the seat, with the seat down. And yes you can build it, if you have the tools and patience.

[@DeezNuts-xo2ee]

Sub isnt gonna seal right on top of carpet

[@210Designs]

Deez Nuts - I tested it..... it’s good 👌🏾

[@kelly_p_bassfishing1338]

Do u have dimensions for this?

[@210Designs]

Kelly Perry - I should have them written down at my shop. I’ll look for them this evening evening and post them 🤙🏾 Thanks for watching and commenting.

[@210Designs]

Kelly Perry - Found then for ya, here ya go: Box Dimensions: 3/4” materials W:49” x D:15.75” x H: 7” x h: 3.5” Cut sheet: Bottom: 49” x 15.75” Back: 49” x (2” - angle) Front: 49” x (5.5” - angle) Left: 14.25” x (5.5” x 2” - angles) Right: 14.25” x (5.5” x 2” - angles) Middle: 14.25” x (5.5” x 2” - angles) Top: 49” x 16.5” (cut to fit) *Add trim pieces to the bottom/top sides of the box. Top for added subwoofer clearance of the seat. Bottom to raise for transmission hump.

[@brandonbolin5938]

Do you have an email or a contact to possibly have a custom box built for my truck?

[@210Designs]

I do, but unfortunately I only build locally in my area bro 🤷🏽‍♂️ I live in Oklahoma and do not ship my enclosures. This way I can guarantee box/sub fitments and test the enclosure. Thank you for watching and reaching out 🤝

[@MrBodean2010]

nice

[@210Designs]

Thanks!

[@sanneh2]

What's the "When We Ride" song at 10:50 called

[@sanneh2]

We're living in a Shazam era. It's Nate Dogg - First We Pray #njoy

[@twotoetangy]

love that song