Dirt Cheap Used Rockford Fosgate T2500bdcp

[@Thumper68]

Nowadays 700 for that power is crazy expensive.

[@theinsaneunknown]

The subs were 180 degrees out of faze, when you were on the test bench. I have owned this amp for over 2 years now and still haven't hooked it up. Made sure it worked through a quick bench power up test and it's been under my bed since. I'm afraid that someone will steal it and this is a VERY expensive and sought after amp.

[@HifiVega]

Those amps are beasts. With the caps being kinda loose I’m sure it was mounted to an enclosure at some point.

[@chuemoua6834]

Is it a beast?

[@415dboiz510]

Hope mine looks like the good one. I got mine into thermal overload one time but that's because I changed a setting on my head unit I didn't realize what it did but it made the amp go deep into the lows. Other then that I did go into protect and blew 2 sub's now. I have the T1500

[@matthewshawn9447]

Cigarette Smoke or Dust for the discoloration inside the amp from the inviroment it was in but other than that Awesome deal on it keep the vids rolling plz.

[@uptobatentertainment]

Such an iconic amp!!! I wish I would have bought one of these from Tri State sound when they had the T2500 refurbs!!!

[@asabhcir3636]

I Just bought two of them off ebay Refurbished from a seller within the last month for $700 each. He was originally asking $799. But took the offer of $100 off. I was just like you when Sound of Tri State had them for $799. But finally found them. Cheapest Refurb currently is $1199.

[@uptobatentertainment]

Rich Basa awesome thanks for the info I will keep an eye out an eBay!

[@DonkeysBreath]

love mine

[@Winters506]

Those exterior panels always pop up on that series. I think Fosgate could’ve come up with a better design on that stuff.

[@jasonhardison7103]

I have a video on my channel to be working on my 2500 funny thing is my ground strap came off and I had to resolder it back down on to the board you should check it out it was horrible runs like a champ now

[@LivingtheJeeplife]

Whats those 3 red chips on this boards One of my chip comes out but still working

[@DonkeysBreath]

there are a few red components on this pcb, hard to answer your question

[@dcole808]

Just got one from ebay at $600..can you tell me what size is the set screw for the power/ground Great video

[@DonkeysBreath]

wish i could

[@shoebmalik4083]

If a have a tweeter of 4 ohm and a speaker of 4 ohm. Can i wire these in parallel to make the resistance 2 ohm and after that can i use it with amplifier that is stable on 2 ohm. Is this right or there is any problem with that?

[@DonkeysBreath]

Big problem, must use a passive crossover to insure you don’t blow your tweeter.

[@shoebmalik4083]

@@DonkeysBreath can i use capacitor to filter the frequency?

[@DonkeysBreath]

@@shoebmalik4083 in theory yes, in the real world its more then just a cap.

[@shoebmalik4083]

@@DonkeysBreath okay. Than you.

[@erictheboringone5292]

Shoeb Malik you can build your own passive crossover to be customized to whatever tweeter and midrange combo you want. You need musical quality caps in a specific microfarad/voltage range for the tweeters and you can hand wind your own inducers to a specific weight to give the proper mH/milliHenries to get the desired frequency range for your mids. It’s not insanely complicated but it’s definitely not for those who lack confidence in their technical skills.

[@HectorRodriguez-fe8xz]

Is normal that those amps gets hot on the edges??

[@DonkeysBreath]

Yes very normal, all to the power transistors are mounted around the three sides. As well this level of RF amp trips on thermal at over 100c

[@HectorRodriguez-fe8xz]

@@DonkeysBreath because i was scare both of my amplis got really hot i tough i connect something wrong

[@HectorRodriguez-fe8xz]

@@DonkeysBreath i put my hand and only can last like 4-5 seconds touching it 😬

[@DonkeysBreath]

Well I mean one has to be using it heavily to get that hot but yes

[@HectorRodriguez-fe8xz]

@@DonkeysBreath then something is wrong cuz it gets hot even at low volumen

[@bradhughes2877]

PLEASE WHAT SIZE SCREWS ARE HOLDING THE COVER ON

[@kelnap2294]

I'm saying the same think right now!! WHAT SIZE?!?!

[@kelnap2294]

Finally got it myself its a T10

[@DonkeysBreath]

t10 driver , but what size thread no idea

[@donellis5005]

Do you have an aftermarket alternator just stock?

[@DonkeysBreath]

Aftermarket, in the build I used the original 2500 in

[@Dj_HackStyle]

Cant hear, you said how many dollars?

[@DonkeysBreath]

700 cad

[@gratitudeattitude7649]

Just heat, the capacitors that lost their plastic top could stand to b replaced

[@macd9861]

Great deal

[@macd9861]

Bet the kickers pound

[@SamuelHollandsh]

Maybe yellow from smoking in vehicle.

[@DonkeysBreath]

one could think, but of passive amps , not much air flow comes through

[@redbricks04]

Do you want to sell it?😀

[@DonkeysBreath]

Sold bro sorry

[@redbricks04]

@@DonkeysBreath I would of gave you 1000 for it😔

[@redbricks04]

@@DonkeysBreath No problem. I want to run four of them in my Drop Top.

[@chuemoua6834]

Heat cycle cause that yellowing

[@edud8452]

Ive seen some used amps yellow on the inside from nicotine-cigarette smoke😂

[@DonkeysBreath]

good point, never thought about that.

[@heavy12inchsub79]

Smoking just not bad for humans only lol

[@domsugar9160]

Ill buy it

[@Levi-ou2bk]

Cigarette Smoke turns it that color

[@DonkeysBreath]

Sound accurate