2 barrel Carb Swap onto a Geo Metro, How to make YOUR Geo Metro Faster -Episode 6

[@cositalinda2516]

Gotta love those little cars i myself have had 3 of them a 1985 Suzuki Forsa sa310, a 1987 Pontiac Firefly and 1999 Chevrolet metro!!! Love your content.

[@louismoench3554]

wow, a real firefly! nice

[@hippie-io7225]

I have a 97 Geo hatch, doing my first ever "DIY fixin'" (Rings, cylinder head rebuild). I really appreciate all your ideas on removing dodads that are not needed, or placed wrong (where they get in the way of normal service/experimenting)

[@DG-zo8bw]

Thank you for being you. I really appreciate you sharing your knowledge and more importantly your words of encouragement to self doubters like myself. I'm excited every time I see an upload from you to learn something new of the possibilities of the Metro I inherited after my friend passed away. After bringing "Bucee" back to life (my friend named it after her favorite convenience store), it's been interesting to say the least with getting on freeways with a slight incline. Definitely watching this video several times to build the confidence to pull it off myself. Sincerely, thank you. Take care.

[@ding7856]

I love how clean that engine bay looks, nothing butchered or hacked up.

[@HotRodGuyGarage]

Everything I own is usually cleaner underhood then inside!

[@MattCooperRoe]

On those two absolutely miserable to get on/off or even move the TBI around while working cuz of them being so short, multi wire grounds on the back of the TBI... I clear heat-shrink butt soldered(the ones that just need a little heat, even a lighter will work)2 electrical connectors and makes it so much easier than fighting with those 2 lil 10mm (i think) bolts. If you don't have electrical connectors handy, you can just slightly slot the ground lugs so you can just loosing and slip in/out real quick. Ive had a few Geo's over the last several years and I wished I did that the very first time I took the TBI off. Just a simple little diy upgrade that I love. If you have issues getting on/off those grounds.

[@1marcelfilms]

I wonder how well you could make a ghetto fuel pressure regulator by putting a fuel filter on the return line. it should provide some resistance.

[@Doc1855]

I’d LOVE to buy a Metro Convertible in good condition, low mileage, 5spd. I’ve owned a 94 and a 96. My 94 was the better of the two. I bought my 94 in November of 93. I put 210K miles in only 2 years. I had to drive from Salem, OR to LA California and back every weekend, (my weekends were 3says). I Loved how reliable it was.

[@HotRodGuyGarage]

There still out there just have to look for the nice cars a little bit more

[@Doc1855]

@@HotRodGuyGarage I’ve been looking for a few years

[@timothykeith1367]

I'm interested in standalone ignition

[@michael_christian9461]

I realy want to see this thing drive now

[@maximumbirdage8440]

I got a 94 metro same motor and i plan on carb swapping following what you did i believe the ecu is shot again and i’ve yet to hear the car run entirely on its on, so all i need to look into past a carb swap is that standalone ignition

[@markusa1121]

Episode 6🎉 Awesome 😎👍

[@captnjaygreybeard6394]

I have an 1987 Pontiac Firefly (Chevy Sprint) I am always looking for some tips. Just had my carb replaced by a mechanic a few months ago with a stock rebuilt Aisan 2 Barrel from Rockauto.

[@GRINDPLAYLISTS]

i'm going to do this mod to my g10A engine, i have a suzuki with a g10b engine, it's a alto , also called suzuki zen with a carb. im picking up a geo metro today, i want to swap that engine into the alto. it weights only 1500 pounds and the gearbox in it is a bit shorter than the geo metro, doing a carb swap and making a blow through setup with a amr 500 or a turbo would be quite unique in this car, no one has ever done a g10a swap before because most of them are going for 1.3 or 1.6 G series. But i'm crazy and i want to replicate a alto works in my own way.

[@HotRodGuyGarage]

Should be a very cool project 😃

[@GRINDPLAYLISTS]

@@HotRodGuyGarage i uploaded a short and tagged you with a other channel 👌

[@BillyTrott-y7t]

@HotRodGuysGarage This is soo helpful. My little lady came home with a custom off road buggy sporting a 91 geo 1L and the computer seems shot plus the wiring is a mess. So I’m hoping to go carb and reduce all the excess crap it has. What would you say I should do to it to get more than aka stage 1 out of it?

[@sr4087]

Amazing job thank you; Im over chasing wiring issues so Imma do as you did What are your mpg after your swap? Also would a holly 2 barrel chinese copy work? Carburetor 2100 2150 A800 2 Barrel Carburetor

[@HotRodGuyGarage]

I've never really tested the fuel economy as the main goal but I have seen 35mpg (it's a automatic) at a later time after going to the 4brl

[@BillyTrott-y7t]

This is soo helpful. My little lady came home with a custom off road buggy sporting a 91 geo 1L and the computer seems shot plus the wiring is a mess. So I’m hoping to go carb and reduce all the excess crap it has. What would you say I should do to it to get more than aka stage 1 out of it?

[@HotRodGuyGarage]

Going carb will definitely clean it up

[@sr4087]

Keep that lady

[@oM-nm4dv]

Can you use a samurai intake manifold and carb on a Suzuki swift 1.3

[@HotRodGuyGarage]

As long as its a 8v you should be able to

[@albchevy6]

Thanks for The vídeo! Can tou help me with a question? I an from Brazil and i have a Swift with this same engine you show hear. I want to remove the tbi and install a carburator because my tbi insant working good and o dont find good parts to fix It. To install a carb i need to change something on the ignition or only turn off the wires in the tbi ?? Thanks!

[@HotRodGuyGarage]

You can just leave the factory ecm and ignition if you wish, I have a video for doing a Hei ignition in this series if you wanted to completely step away from the computer

[@albchevy6]

@@HotRodGuyGarage thanks!! I will look for this video

[@nates7135]

Whats that intake make of?

[@HotRodGuyGarage]

The intake is a OEM aluminum intake with a adapter

[@nates7135]

@@HotRodGuyGarage ok I was thinking of trying a 3 s&s carb build when I finally track down a good deal on one.

[@michael_christian9461]

Maybe even see if or by how much you neat the stock 0-60 now

[@HotRodGuyGarage]

Most testing was done with manual trans cars finding 3/3 info is almost impossible once it breaks 60 in the 1/8 mile it maybe worth exploring

[@StopTeoriomSpiskowym]

a 3 throttles? 4 cyl engine swap

[@asandberg6]

Do you think a 1 barrel Holley 1904 would run ok on a 1.0 engine. Im looking to carb swap my TBI 96 3/5.

[@HotRodGuyGarage]

They are only 150cfm for a non performance application it would probably work as well as the TBI but I have no first hand experience with them

[@asandberg6]

@@HotRodGuyGarage I'm not looking for performance so much as getting rid of the computer and having a more reliable car.

[@asandberg6]

I have a Datsun 1200 progressive 2 barrel coming in the mail. Will the hood close with that air cleaner on?

[@HotRodGuyGarage]

@@asandberg6 it will on my car

[@asandberg6]

@@HotRodGuyGarage That gives me hope.

[@1marcelfilms]

Im only afraid of my cars not passing emissions

[@HotRodGuyGarage]

@@1marcelfilms that's a concern in the nanny states for sure

[@AbulkalamAzad-cr7ci]

😅

[@BillyTrott-y7t]

This is soo helpful. My little lady came home with a custom off road buggy sporting a 91 geo 1L and the computer seems shot plus the wiring is a mess. So I’m hoping to go carb and reduce all the excess crap it has. What would you say I should do to it to get more than aka stage 1 out of it?