2 PVC Projects for fishing (thats awesome)

PVC is the material of to days DIYs again , 2 awesome projects that any fisherman can build easily.
both projects were made from 1 1/2 " PVC , but you can adjust the materials and measurements as needed
here is a Link to the T bolts I used in my track system for the first project
MISSION AUTOMOTIVE 5-Pack of T-Slot Nuts - Ideal T Slot Nut for Toyota Tunda & Toyota Tacoma Pick-Up Truck Bed Deck Rails - Cleat/Cleats www.amazon.com/dp/B07739WXJB/...
as always I thank each and every person for watching and if you have questions leave em kn the comment section and I'll do my best to answer em
For Fishin N Stuff gear please visit link.below
if your looking for something not listed , leave a message
www.etsy.com/shop/PebsPrettyf...

[@BlueLineFishing]

Love the rod holders, especially the second one. That's a slice of fried gold right there!

[@FishinNStuff]

Thank you brother lol I appreciate that , they both worked pretty dang good

[@edwrubluski7277]

Rock on! Sitting here sippin on some stuff, trying to game out how I’m going to make exactly what’s in this vid. Thanks!

[@erinkourelis7430]

Hour one so far so goodLooks sturdy for all my rod/reel combos

[@WesLovelace]

Couple of great Rod Projects....The Black out really makes the holders Pop!!

[@FishinNStuff]

Thank you Wes . I appreciate it brother

[@jeremymcjunkinhik..s6324]

And i love the diy fish light too

[@williamvarner1406]

Awesome thanks for sharing

[@RadReelingFishing]

Radar Love at 4:34. Dude I love the way you arrange your diy videos!

[@FishinNStuff]

Thank you brother , I appreciate that man

[@colinphilpott3700]

Great builds. Thoroughly enjoyable to watch.

[@FishinNStuff]

Thank you brother

[@WildBillFlysRC]

Right on man, cool way to keep your fishing poles from getting all tangled up. 🤙🇺🇸. Tacoma 👍

[@FishinNStuff]

Thank you brother, ol and my Tacoma was made in the USA lol just saying lol

[@DavidGomez-wd4or]

Thanks for the tips.

[@tomw3380]

Nice project. Flaring the end of the tubes with heat gun and a bottle will help protect the grip from damage. Great projects, well explained with options.

[@FishinNStuff]

You could do that , or you could plastidip the ens like I did on the other rack

[@jonathanbrooks1832]

Love the fact you drive a taco. Thanks

[@FishinNStuff]

I've owned 3 . They are good trucks , you got to love em

[@JustinsFishinFetish]

You my good sir are the pvc king. 👑

[@FishinNStuff]

Thank you Justin. PVC king haha

[@daviddebaun8306]

This is a great idea for the back of your truck Keeps them from going all over the place

[@FishinNStuff]

Thank you brother

[@jonmartin6451]

Man I’ve caught many Big Sturgeon’s and Stripers on those Garcia Big Game reels, they are great.

[@raulsanchez4493]

Awesome build

[@vincentdonnellythemadfishe5158]

Your a talented man. Another great build. Loved it. Makes me want to start drilling LOL.

[@FishinNStuff]

Thank you Mr Donnelly

[@ricksalling6198]

Howdy. Made the PVC Rod Holder. Made it for 9 rods. Painted it OD Green. It is great! That PVC cement is tough to work with! Dries fast, so you must move quickly. Only hard part was I don't have good tools to get good straight cuts. But it worked out fine. Thanks from Guntersville, AL

[@FishinNStuff]

That's great man . I agree with you that rod rack is really cool . I'd love to see a picture of it . My Email is in the about section at the top of the page If you get time . Ol and check out some pvc cutters they don't cost much and they work really good on PVC pipe

[@ricksalling6198]

I am learning how to use youtube. I don't see the "about section"? But can send you pictures.

[@ricksalling6198]

@@FishinNStuff Think I found the process to email you. Let me know if you get it.

[@FishinNStuff]

It's [e-mail] you have to go to my main page by clicking on the little round logo , when there at the top it says home ,,,,,, videos ,,,,,,,,, playlist ect . If you swipe it to the left the last one says about , click on it

[@denniewhittemore5651]

Awesome I’m doing it . Thx man

[@HotMusicEverOK]

You are truly genius ,awesome job

[@FishinNStuff]

Thank you brother

[@enduringpatriot]

Love it! PVC was made for DIYs!

[@FishinNStuff]

It sure is handy lol

[@carnufiasfishing8444]

Don't know how you do it but you do brother. I can never decide on what project to start if i wanted to. Your DIY are so explanatory n easy to follow. Thanks For Sharing such information for us anglers 👊💪🎣😎

[@FishinNStuff]

Thank you brother, your comments keep me motivated

[@markb.1259]

Excellent projects! I think I'd want the ability to pivot project #1 from the angled position to a straight up and down position, so I'd have to find a way to put some type of locking pin in the system to lock it in either direction One project #2, to add weight to the stand, I think I'd just fill the rear most piece of PVC with as much quickcrete that it'd hold. Awesome projects... Thanks for sharing!!!

[@psychonursehomestead9680]

Between Harbor Frieght and Home Depot. My Garage is looking better each month. Thanks Brother. Hoping to see you at The Catfish Conference In February

[@FishinNStuff]

I'm thinking I'll be there buddy . You got to love abby place that sells tools , if your a tool guy lol . It's like a toy store for grown ppl lol

[@timw711]

The rebar suspense "we will show you that later" is hyping me. This man is a mad genius!!!!

[@FishinNStuff]

Thank you Sir

[@4149dwiley]

Great DIY, think I will try your idea and I will need to add another row to get 12 rod holders

[@PondsSoloFishing]

another nice DIY video. Love the truck rack.

[@FishinNStuff]

Thank you brother

[@BoneyardBassin]

I'm so into PVC projects! Awesome video man! If I still had a truck. I'd do that for sure. 🤘😎🤘

[@FishinNStuff]

Thank you brother lol Gerry you a truck lol jk

[@Inpreesme]

Thank you

[@brianwalker2484]

By far the best diy dude! @Fishin N Stuff

[@FishinNStuff]

Thank you brother I appreciate it , and thanks for taking your time to leave such an awesome comment

[@kevinsandells9933]

Just frkn awesome.

[@FishinNStuff]

Thank you brother I appreciate that

[@silvergrizzly316]

Brother, you're a fish'n engineer!😎 Both of those rod racks are PURE AWESOMENESS my friend!!! Keep'm comin Keith!!! 👍👍☆Jay

[@FishinNStuff]

Thank you brother , I appreciate you commenting and building up my self confidence buddy

[@jamiebrinck]

On the rack in the bed for us without a track system, you can put every other rod holder at a steeper angle. That will give you more room between reels.

[@sfoutdoors8917]

That's awesome I'm going to have to build one for my truck. You'll be seeing it in my videos for sure.

[@Rolaids65]

THANK YOU GREAT IDEA

[@FishinNStuff]

Have a safe and prosperous New Year

[@btgame1836]

Great video keep them coming.

[@FishinNStuff]

Thank you brother

[@REMYSCH]

Great video

[@kentuckycatmanoutdooradven4643]

Definitely give me some ideas for my truck!!! Great video brother

[@FishinNStuff]

Thank you brother

[@aquaticadventures5088]

Another great video, brother. I love PVC lol, getting ready to make your submersible light

[@FishinNStuff]

Thank you brother

[@Steve-hr1nf]

That was awesome!

[@FishinNStuff]

Thank you Sir

[@brcjr]

I love this idea. I would suggest rounding off and sanding the inside of the pvc at the opening. It’ll help prevent cutting into the foam on the handle.

[@FishinNStuff]

That's a good idea you can hear it and use a bottle to do it

[@KBAnglers]

That's awesome ideas right there!!!! Since I work in a hardware store, you've given me some ideas on how to safely transport my rods!!!! Thanks, brother!!!

[@FishinNStuff]

Thank you brother , you need a safe way to transport em . You coming back down here next year for the tournament aren't you ?

[@KBAnglers]

I'm not sure yet... Depends on if I can get my boat completed before then. I've had to quit fishing recently so I can finish it up!!😅 I let time pass me by and now I'm scrambling trying to get it ready!!!

[@FishinNStuff]

I think the tournament is moved back till april this year

[@KBAnglers]

April 18th is the date.

[@scottlouis7785]

Impressive

[@joebuck66]

Awesome. I don’t really have a place that I can back my truck up to and fish out of but, I think I can make a couple of small adjustments and use one to store and transport my rod and reels in the back of my truck. Thanks for the ideas.

[@joebuck66]

That second one you could even take out and set it on the river bank or lake bank.

[@FishinNStuff]

I never thought of that but your right . That's a good idea

[@itowmyhome797]

awesomeTimes two

[@John_Haney_213]

Sweet I made a similar rod holder for my truck but I might make a few changes to it now that I seen this 👍👍🎣

[@FishinNStuff]

Thank you brother I appreciate it and thanks for taking the time to leave a comment I appreciate that too

[@johnhamilton9229]

Great idea. You could add additional pipe to make tackle and cooler holders. Use pipe as a grid system. That’s how I held pots still underway in the Coast Guard. Of course my grid was aluminum bars. Thanks for the great videos and I see the fumes of painting have caused any nerve damage 😂

[@FishinNStuff]

Haha nope no nerve damage lol . I was always crazy lol . Thank you brother I appreciate you watching em . And yes Sir that's a great idea about the grid system . How long was you in the Coast guard?

[@johnhamilton9229]

Fishin N Stuff I served for 25 years. I was lucky enough to catch many different fish during my career. I’ve caught halibut to mahi-mahi. Now that I’m retired I’m getting back into fresh water in North Carolina. Your videos are fantastic inspiration and explained well enough for a coaster cook to complete.

[@scooterfishing9323]

Beautiful video

[@scooterfishing9323]

What do you think of these kzbin.info/www/bejne/joXFfqSYapmJars

[@billroyals7223]

I just happened to run across your page while watching random videos and i watched one of your videos. For whatever reason i didn't subscribe at that time and it was a couple of weeks before i found and watched another of.your videos. This time i subscribed and now i am going back and trying to see them all. I just wanted you to know i am impressed with your projects and the simplicity of them, you seem to make them look like that anyway. When you finish something it always looks really nice. Keep making your videos and i'll watch them while trying to catch up on your older ones, They're new to me.

[@FishinNStuff]

Thank you brother . That's the part I work hardest on is making things easier . Sometimes it's just easier to weld something but everyone can weld . You know what I mean

[@allenandmain]

Good job thnks

[@freddysumner4015]

Great stuff. Really like your channel.

[@FishinNStuff]

Thank you Sir , I appreciate you watching brother

[@soburnedout]

FINALLY you used a satin or matte finish- I know ya did it to match with the bed liner, but it always looks better than the semi, or full-gloss. Just my opinion, but it is mor contemporary- modern I guess

[@FishinNStuff]

Yeah that's an older video . I try all kinds of stuff lol . One of the best finishes in my opinion is a bedliner spray it's flat and I like the texture . I used it on the rod rack video I did

[@fossilcreekkennels1973]

Great projects brother keep them coming

[@FishinNStuff]

Thank you Sir

[@DESERTSTATELINEANGLERS]

Hell yeah bro

[@codybro4792]

Awesome video thank you so much. I built a rod holder similar to the second one in this video years ago but with my short bed Tacoma it just ate up a lot of bed space so this time I went with the first style build in this video and it’s absolutely perfect. You made it super easy to follow and just copy. When I built the other one years ago I couldn’t find a decent video and just saw pictures so I wasted a lot of time and pvc just trying to figure it out but this time it was a breeze. Thanks again and keep up the awesome videos!

[@FishinNStuff]

Thank you Sir , if you know someone that welds I've got a steel truck rodrack video that's really cool and it's pretty cheap to make

[@codybro4792]

Also, I apologize if you mentioned this in the video but the T-bolts for the track system, what size bolts are needed for mounting the metal to the T-bolts? I think on Amazon it said 3/8 inch but before I drilled those holes to mount to the truck I just wanted to make sure. Thanks again. I’ve had a lot of friends wanting to do the same build and I sent them all your video.

[@WhatsthePOINT_EDC]

@@FishinNStuff can we get that metal fishing rod video??? Thanks man!

[@peedeefishing]

Great stuff brother. Keep it up

[@swampybman7741]

I built a rod holder for my JEEP Wagoneer and after several seasons it started to fail on me. I used "U" clamps ( conduit holders) on a piece of 1"X 12" board cut the length of my JEEP's front bumper. My problem was screws becoming weak and failing in securing the tubes to the board. My ends were left open to drain the tubes. I used rubber straps to secure the rods to the boards. All told it looked like Franken-rod holder!. What you suggest to make that would hold together better, look good. The spare tire on a Wrangler gets into the way ( for me). Love yer builds young man! Keep 'em going!

[@FishinNStuff]

Thank you Sir . I appreciate it I've been thinking about making a rod holder for a reese hitch reciever , but everyone doesn't have em , Email me a picture of what yours kind of looked like if you have one [e-mail] maybe it'll give me an idea

[@FiveDollaHollaMyAss]

Good stuuuffff ty

[@regisbiller5726]

Thanks for the ideas going to try the one in the bed because I have a tonneau cover that don’t want to remove every time

[@FishinNStuff]

Good idea

[@jelly_fishing]

Very nice - nice job!!

[@FishinNStuff]

Thank you Sir

[@darrellrichards2133]

Nice job

[@FishinNStuff]

Thank you Sir

[@docriordan7787]

But wait! you need to build one more for the guys that have toolbox in the bed. I used plywood to bolt PVC to and metal hangers to drop over inside of toolbox lid. That way the rod holder is more safe. Also some may want to use self tapping bolts instead of glue on the T"s in case you change your mind on the angle the rod tips are setting. Cat rods and pan fish rods have a different backbone to them. Love the how to videos getting a bunch of ideas keepem coming!

[@FishinNStuff]

That's a good idea , about changing angles

[@McGrathBk]

That spray paint is the only kind I’ll buy. Not only is it cheap it lasts long outside.

[@FishinNStuff]

I agree

[@wannabeangler]

Great DIY! A helpful idea to add that requires DRILLING! Yes, I said drilling....lol. Put a weep hole at the backside of each rodholder. Don't know where you live, but it rains a lot here in Southeast Virginia! The weep hole is self explanatory.

[@FishinNStuff]

I agree with you

[@SluSharkND]

You had me at PVC, but "rebar"? No WAY I could stop watching at that point. Love your channel, keep up the great work. I really liked the second build, because it seems like those compartments you created with the extra PVC will work great to keep stuff from sliding around.

[@FishinNStuff]

Thank you brother , I appreciate you watching and taking the time to leave a comment, both Racks turned out pretty cool man

[@walte99]

Cool deal! I wish we could drive on the beach to fish here in SC. As far as I know, there is no place here that it is allowed.

[@FishinNStuff]

I know you can in Daytona beach , but I don't know any where in north or South Carolina you can

[@L7Bass]

Good idea man. New sub here

[@wesleycurrin1457]

You can vary the length of the rod tubes if you want to add a couple more. This can set the reels at different heights providing more space to fit them closer together. Take into account the varying lengths of your rod handles as well.

[@FishinNStuff]

That's a great idea man , that would work great

[@WhatsthePOINT_EDC]

Good idea. I was about to start the project and knew I was missing something.

[@jeffjackson5331]

Cool ideas. They look good bud

[@FishinNStuff]

Thank you brother , I appreciate it man

[@jeffjackson5331]

Fishin N Stuff you’re very welcome brother! Keep up with the good ideas. God Bless

[@WestMichiganJigCo]

I really wanna see a pick of it outside and loaded up!

[@FishinNStuff]

I made it for a friend who took it to the beach and put it on his boat . I asked him to take some video or pictures for me when he gos fishing again but I'm not sure when that will be . But I already know itll work its easy to sold not too . Id really wanted to make it bullet proof you could make the bottom base out of 1/4" instead of 3/16 , you could even make it all 3/8 like the top is but I think that would be over kill since the very top of the line reels only have 25lbs of drag and no body runs their drag maxed out . Ppl act like the fish they catch pulls harder than other ppls when really the drag on the reels are the determining factor of how strong a Rodholder has ti be

[@MrJohnisthename]

You could drill a few holes across the bottom so they don't fill up with rain.

[@FishinNStuff]

Hey I thought about that after the video lol . Bit your exactly right

[@davidmcduffie1398]

Really like the second rack because its easily removable ! Did you drill drain holes on the bottom side to drain out any rain water that might get into the rack through the open top vertical pieces of tubing ? Another great PVC DIY Build. Keep them coming !

[@FishinNStuff]

No sir I forgot too lol , but that's a good idea . I would drill the holes on the bottoms of the T joints . The joints are the lowest points on the inside . I actually thought about putting sand in it for weight but I wouldn't it would be hard to get in and out of the truck

[@WhatsthePOINT_EDC]

Glad I’m reading through the comments here. Just got another good idea. Thanks man!!

[@jerrykrobby]

Nice work! Just need some drain holes so water can get out if it rains.

[@FishinNStuff]

Dang it lol your right lol , how did that slip my mind lol , good catch brother

[@jerrykrobby]

@@FishinNStuff lol I'm the same way.

[@bowfin6329]

Me too haha

[@rabidfan9497]

Fishin Stuff doesn’t fish in the rain. Just Kidding. Great Catch

[@FishinNStuff]

Lol KZbin keeps me so busy I don't fish much any more lol . I'm working on getting ahead though lol

[@schism420420]

You should use a plastic prep spray before you paint . Your paint will last forever and never chip . BASF makes it and so do others . I like BASF . Love your videos man ! ! & !

[@FishinNStuff]

Thank you brother

[@davebeard4987]

Love the one you made for your TACO........I also drive a TACO...... Have you had any issues with water filling the rack up???? Did you add a drain hole somewhere??

[@FishinNStuff]

Yes Sir you do need to drill a couple hole underneath . Didn't think about it making the video . But I dont leave mine in my truck all the time . I've got another rack video . Where I made one out of steel. No.drains needed

[@robertlivingston1634]

Nice as long as there's no low tree branches on the way to the lake and you're definitely not stopping at McDonald's.

[@FishinNStuff]

You can stop at McDonald's, their stuff is 9 foot and I leaned em back so they ate only about 8 ' . But really you control how tall it is . I normally keep my rods in my boat standing up and they are way too tall but I swing out at the drive through and its fine , I appreciate you watching brother

[@iamsain1969]

Would be cool to have a rod holder in the bed, without a track system taht could be adjustable to slide it from the front to the back, for bank fishing. Even if you had to attatch it to the bed somehow to keep it from coming up.

[@fishin-impossible2992]

Another Great Video brother, do you have any ideas on how to transport those bank rod holders you made in the truck so they wont slide around and beat your rods or bed up. Keep the DIY projects coming

[@FishinNStuff]

I'll think about it man , that second pvc rod holder would work because of the compartment in it . Plus it holds your rods up safely

[@vinnyhowells8132]

well done....wondered if somehow there was an internal circle cap to seal the 10" at the T section then you could have water filled the entire tube frame maybe, just a thought. but love it, keep them coming

[@FishinNStuff]

You cab do water I thought about that , but the water splashing around will keep your roof handles wet lol .I thought about sand too . But its heavier than I thought it would be

[@FishinNStuff]

I'm sorry you did say to seal it off . I missed that I had just woke up lol . Yeah I say that would work man

[@azbbcatfish23]

Nice set up might try the 2nd one...what rigs you using "rods n reels"....video on your rigs???

[@FishinNStuff]

I like the Abu Garcia 6500 ProRockets on the Whisker seekers . For catfishing and trolling

[@robertmatthews4599]

This is really cool! Did you ever make one for a car? Been trying to think of ways to keep my rods in my car so I don’t have to worry about my kids getting to them or them being in the way.

[@FishinNStuff]

Not yet

[@Chris-ei7iz]

You should drill some small holes on the bottom of the main pipe to let water can drain out if any get in the tub

[@FishinNStuff]

Your right

[@chucksmith5002]

I like them especially the second one since i don`t have a track in my truck . But should i put holes in the pipe for rain water drain .

[@FishinNStuff]

Your right drain holes was something I over looked

[@jasonphillips752]

If you heat pvc in the oven or toaster oven for a few minutes it becomes playable you can move it and stretch it however you'd like or even to close the ends don't get it to hot it will melt or catch fire

[@allenivey7435]

Hey really like your diy pvc pipe videos. Just one question for you what keeps your rods from coming out while going down the road ?

[@FishinNStuff]

The weight of the rod will keep it in , I've used em like that on my boat and in my truck and never have had a problem, but don't put rod socks on the rod because I have had those too blow off . I appreciate you watching brother

[@giannolo1]

Both those build looked great. So now you have rod holders for garage, your truck, and your boat. Do you have a rod holder to carry all those rods to a bank or a pier or would you use the beach cart you built? Went fishing with Dieter Melhorn last August and we had fun talking about your KZbin Channel. He said you lived nearby. Would have been a kick to meet you. Anyway, keep up the good work. Love some of the stuff you build.

[@FishinNStuff]

Thank you very much , it would have been great meeting you . Ol Dieter, he's a hoot lol

[@solarfunction1847]

If you really want to cut down the spending on materials for those crab pots, then you can do without the perforated strap & reinforcing bars & just use recycled pallet wood & weigh each corner of the crab pot down with small plastic milk bottles that have handles on the bottles & fill it with sand as you tie the handles around the base of the crab pot.

[@nascardude86]

Do you ever flare the ends of your rod tubes. Use a heat gun and a glass bottle. Push the bottle into the opening when it’s soft and it will flare the ends .

[@sbaner5]

I have a fish and ski. The only space long enough for rod storage is the floor ski area which will get wet along bottom. Have you ever created a DIY rod storage system to fit in this area?

[@FishinNStuff]

No I haven't but the next video I'm working on is going to be a rod storage for a boat , im editing one right now . The one im getting ready to start on mine help you hopefully

[@kevincollins5201]

I would drill holes in the bottom here and there to let the water out if it rains so water doesn't get stuck in your tubes

[@FishinNStuff]

Your exactly right , I should have included that but forgot

[@Flow_intoflames]

Keep up the good work man. Got a sub out of me.

[@FishinNStuff]

Thank you i appreciate it my friend

[@baclieustud]

Was about to spend 500.00 at Boat outfiiters,,but now after watching this,,,I'll pass,,thanks for a great DIY video man,,Tight lines brother!.

[@FishinNStuff]

Thank you brother I appreciate it

[@casualcarolinafishing5835]

That's cool and all, but I don't have a truck. Can you make one of them things for a lawn mower?😂😜👍💯

[@FishinNStuff]

That's a great idea hahaha 😂🤣

[@jamesmushinski9872]

NICE ROD RACKS !!! DO YOU MAKE A ROD RACK THAT WILL KEEP YOUR RODS SECURE. FROM BEING STOLEN. I LIVE IN TEXAS AND WE CAN ONLY USE 2 RODS AT A TIME , SO IF WE LEAVE SOME RODS IN THE TRUCK THEY HAVE A CHANCE OF BEING STOLEN.

[@FishinNStuff]

Im going toi work on that , I've had a lot of ppl ask the same thing

[@lcswartz49]

I’d like to see you build a rod holder or some type for an F150 Ford pick up crew cab with a tunnel cover on the back of it I have a Tono cover on the back it is unremovable Thank you

[@lindsayem6611]

Hey buddy great vids, I'm enjoying your pvc builds but how about different colour paint like your logo colour instead of crap black. Just my opinion it would like more awesome.

[@FishinNStuff]

I might do that 🤔

[@rider660r]

One thing when working and gluing PVC,don't just glue them.Buy some PVC cleaner and use it,take all stickers off where glue is going to be,clean the PVC well (both pieces) then use your glue.Using glue alone doesn't allow it to adhere to the PVC as well and it will work/break lose over time.

[@FishinNStuff]

You right man it does make it stronger .

[@catfishassassination3821]

Need to do one for a truck that has a tool box

[@FishinNStuff]

That's a good idea brother

[@solarfunction1847]

I have an idea for you to try to do, make a crab pot using a jumbo plastic rectangle laundry basket around 19 W x 12 H x 28 L with a flower pot with the bottom cut off that is 8 R x 6.5 H that you screw onto the bottom or cable tie the laundry basket that you've put a 8 inch round hole in on one end of the basket. For the base which is normally the top part of the laundry basket you use 2 or 3x 5/8 x 30 L painted reinforcing bar for weights, 2x pieces of 2 x 4 x 20 L hardwood with 3 holes partly drilled in which reinforcing bar goes into, plastic Safety Barrier Mesh as netting & perforated metal strapping on a roll that you screw around the outside of the wood to pull the reinforcing bars tightly into the wood. Make sure that you wind 3/16 rope around reinforcing bar, around plastic safety barrier mesh & around the basket so that no crabs can escape. Mount a mesh bag to the other end inside the pot for the bait & mount your rope to the wood for retrieval.

[@FishinNStuff]

That sounds like it would work good

[@solarfunction1847]

You can possibly make up one or 2, try them out & see what they are like

[@FishinNStuff]

I don't live near the salt water , that's the only problem

[@solarfunction1847]

You could modify for creek fishing just use your imagination.

[@Hazel.Eyed.Gemini]

Can't go wrong with 10"