DIY Sinker Mold ( Cheapest and Easiest )......

TaDay we are making fishing weights using the most Simple method ever. special thanks to Haley Neal for voice over work .....Special thanks to Haley Neal for his voice over work
Thanks for watching and subscribe and click the bell for notifications of new content ( it's totally free )
For the materials used on the video click link below
www.amazon.com/shop/fishinnst...
For Fishin N Stuff Gear visit the Link below
HATS
DECALS
SHIRTS
www.etsy.com/shop/PebsPrettyf...
To save 20% off of any ,,,,,,,,,,,,Hybridlights,,,,,,,,,
Go to
For an Awesome welder that does everything
Check out the link below use code,,,,,,,,, FISHIN ,,,,,,, To receive a 10% discount on top of the automatic. 15% discount the website gives you
www.ssimder.com/products/sd40...
For Hybridlights 20% discount use this link
hybridlight.com/discount/Fish...
enter code below
FishinNstuff
For 20% off purchase
Thanks for watching dont forget to subscribe and click the bell for notifications
For 10% off of Katfish Clothing click on the link below
For some Awesome BlackLights fit fishing. And 10% off of them use this link
neonicblacklight.com/?ref=ziQ...
Then at checkout use code. FishNstuff
www.katfishclothing.com/?ref=Fishinput
Enter Code. FishinNstuff at checkout for 10% off all purchases
For 10% OFF of every purchase
On products at
CATCH THE FEVER RODS
use code
FishinNstuff
At checkout .......

[@FishinNStuff]

[ this is a list of the parts I bought off Amazon ] Check out this page from fishinnstuff www.amazon.com/shop/fishinnstuff?ref_=cm_sw_r_mwn_aipsfshop_aipsffishinnstuff_VYC99BHMM8XR8DG9C64R&language=en_US

[@bassxpro]

Dude got a PhD in homemade fishing ideas.

[@TNL_tez]

man fr

[@handledhandlehandlinghandler]

He is a Fizzishin'.

[@gunnutmike]

Your accent is part of why I watched the first video I found of yours. The fact you really know what you’re doing and have a sense of humor is why I subscribed and watch every one I think sounds interesting. Keep doing what you do!

[@FishinNStuff]

Thank you very much . I esky appreciate it support too

[@jessemullins8144]

Your accent makes you sound relatable and trustworthy. Don’t change a thing buddy.

[@onthewrist5006]

I have absolutely no desire to fish. But damn bud your funny as all hell, and me and the wife never miss an episode. Please dont change! Cheers from N.Y.

[@FishinNStuff]

Thank you very much and please thank your wife for me . You guys stay safe

[@BobBohner4851]

I had no idea silicone would stand up to molten lead. Wow. Thanks. Great idea

[@FishinNStuff]

Yeah silicone is some tough stuff lol . That's why they use it in cooking , like for pan handles and such

[@deltonlord5475]

I was PRAYING you’d include the PPE safety video footage again! I cry every time I see it! It’s legendary! 😂😂

[@FishinNStuff]

🤣🤣 lol safty people safty lol

[@michaelsabo258]

How could anyone hate on you!!! Quality ideas and super fun an entertaining!

[@FishinNStuff]

Thank you very much

[@dwayneard2099]

I'm from South Carolina so I didn't even know you had an accent. I could watch a new video 3 or 4 times a week

[@bretburt7317]

I made myself a ton of sinkers 35 years ago using paperclips as the eyes. Still have a few in my arsenal! Cheap as can be.

[@user-ok4ks6ti3f]

I must say you are a cartoon. And I mean that in a respectful way. that is why we all love how you entertain us to make us come back for more. Your accent is you and we all accept that so dont change a thing. Keep them coming were hear to support you. The Geez

[@CanoeKayakFishingAdventures]

I love this channel

[@FishinNStuff]

Thank you very much

[@shedmanx3640]

Mate you are hilarious. Love your content and have recommended you to all my sons. Sure you talk funny but I’m Australian and talk funny to you. That’s what makes the world interesting. Folks are folks and you’re great. Keep doing what you’re doing.

[@akilla4reala669]

North Carolina!!!

[@dennislewis7602]

Yes Sir!

[@blade420playElite]

South Carolina!! 😂

[@dennislewis7602]

@@blade420playElite It’s still the Carolinas 😂! We all fish in the good water 😂

[@akilla4reala669]

@@blade420playElite close enough, I guess. 😬✌️

[@blade420playElite]

@@akilla4reala669 🤣

[@jimpate4144]

Your accent is what makes your videos stand out.

[@walkinphos9040]

No sinkiing feeling from this video...and Cranky was crankin' today. Thanks for ideas and entertainment.

[@1Whitetail]

I do I do like this video, love your money saving ways that actually works well.

[@loriebriarton2285]

Another great video! Your lure buddy was a hoot! 😂 Appreciate what you do, thanks!

[@bobwallace5257]

I think you’re hilarious! Maybe the funniest channel on KZbin!! And yet I’m still learning on every video!!!

[@FishinNStuff]

I really really do appreciate that alot

[@sm1340]

Don't change a thing. You're a funny Bastid !🤣 P.S. Luv the crank bait ...

[@joebuck66]

That was an Awesome video Keith. Great idea. I don’t have a backup account so let me just say, I love you buddy and your videos are the best.😊

[@YeetOutdoors504]

The reason the ones with the swivels messed up is because the swivels will actually float on molten lead. You could try using something like a paper clip to keep the swivel under the molten lead until it sets.

[@howardpfister9907]

I love your Hacks, used a lot of them 👍

[@michaeleasterday8056]

Love the channel. People call is country people backwards but we're very innovative. You do us all proud. Keep up the great work brother

[@robertlee8400]

Your great to me , & I don’t see nothing wrong with a KZbin channel about fishing that saves you money on fishing , hell that’s why I like this channel , everybody wants to save money right .

[@FishinNStuff]

I know I do lol . A penny saved is a penny earned right

[@robertlee8400]

@@FishinNStuff yup

[@jodydurant8315]

I am from the Pacific Northwest and I actually enjoy the accent. It seems friendly and honest. I could handle a little faster delivery, but annoying isn’t even on my radar. Forget the haters. Thanks for thinking outside the box. I love ideas and there are very few creative thinkers. Subscribed.

[@FishinNStuff]

Thank you very much . I really do appreciate that

[@lcswartz49]

Good afternoon BILLY just wanted to jump in here, so my hand up and say hi keep your line wet🎣🎣

[@rockytopwrangler2069]

Good DIY How -To ... We all want to know things too .... Gotta love Cranky .... deserves his own show .... Oscar Quality ..

[@Bamaoutdoors]

I mean I don't even need weights I just enjoyed watching your videos😂 most people don't realize how long it takes to put together a video like yours.

[@richarddowner4292]

DON'T DELETE THIS. I, R. Downer Love, and can't wait to watch your videos. plus, I love using your DAD jokes with the fish. keep them coming. I use that same lead pot for bullet reloading. and I also use it for a fishing weight mold I bought, to pour and make my own fishing weights. Thank you for your time and videos 😀😀😀😀😀🤣🤣😋

[@ArtwithVikkiC]

Nothing wrong with how you talk . We enjoy this channel

[@user-iu7ul9pr9e]

Love how you talk and love you're Sinkers. ❤❤❤❤❤❤

[@SgtCude59]

Tennessee fan here I enjoy watching your videos

[@prestonrussell605]

I like your accent, it was what attracted me to your videos. Cool video, very informative and entertaining. Keep up the good work!

[@robertandrews5656]

I love your accent and I always watch your videos. You have a great dose of humor!

[@paulstuartwilson485]

Very cool! Great diy project for the winter. Thanks. 👍🇺🇸

[@61diemai]

I cast my sinkers utilizing spent brass ammo casings. They look cool , stack easily into the tackle box compartments and do not snag up as much compared to teardrop-shaped sinkers. I'd insert a stainless steel wire form all the way to the bottom with an eyelet protruding and fill up the casing with molten lead, cutting off the excess lead overflow after cooling. I use rifle casings cal. .308 and cal. 30-06 for stillwater fishing in lakes and ponds(approx. 35 and 45 grams respectively) and pistol casings like 9mm , .38 or .357 mag for smaller sinkers or for dropshot fishing. On these cylindrical pistol casings I'd bend the rim slightly inward prior to casting in order to prevent the lead plug to slide out of the casing. Heavier disc sinkers for river currents I'd cast into the aluminum casings of tea warmer candles. I'd pull out the wax(or use a burnt up one and scrape off all wax remainders)and poke a U-shape wire form through the outer wall, bending a small radius to either end at the inside. A wooden laundry peg and/or some aluminum tape holds the wire form in place whilst pouring in molten lead on a plane , heat-resistant surface. One can fill up the candle casings to 1/3 , 1/2 or full to the brim to get different weights. Tight lines from northern Germany

[@patcolston2901]

Glad to see Sharky back Thanks Keith

[@FishinNStuff]

Cranky the Crankbait

[@rossmarkle1713]

I just really enjoy your content and your sense of good clean humor 🤣🤣👍👍

[@markpinther9296]

This guy is the most entertaining sob I can think of. Not afraid to try and make things for our benefit. I appreciate it. Even though I have occasionally sped up the replay….. hahaha

[@FishinNStuff]

Hey don't be speeding up ,,,,,hahaha I appreciate Sir

[@jonathanlusk6374]

Love the silicone idea. Going to have to try that.

[@michelejbreese5100]

I love your southern style. I think you are super awesome dude fun intelligent handsome, hello mrs Keith. I hope he is awsome like he is on his show. Hugs your super fan.

[@pastormike5054]

Frickin flawless awesome 👍😎

[@kuntryboyzltd467]

I love your content me and my son watch every episode you post.

[@JettBlast]

Your accent is no different than mine, so I find nothing wrong with it. I find your humor just right and I like that your content is PG, and your editing is great, and the content is not overly long or boring. you have a very nice setup shop, tools, skill set and buddies with info and gear and you really explain and make it easy to understand on your how-To's.

[@FishinNStuff]

Thank you very much . I do my best . And I too really dislike boring videos. So I try to make them as watchable as possible

[@rickmattheis8487]

Love your ideas! Like to get some more great ideas from your channel. Thanks for sharing!

[@geoffhunt6439]

Love your little mate. Love every thing about your videos

[@indymac7]

Another great video, and the vernacular is just right for this channel. I've been learning so much. I finally picked up some wine corks from Olive Garden for my bobber projects. Keep the hacks coming.

[@ronmurphy9819]

Cool video! Very usable. I definitely plan on using it. Thank you and keep them coming. I’ll see if I can come up with one and forward it to you.

[@bryankerckhove6873]

It's a great idea with the mold idea. Can make any shape n sizes. Thanks man.

[@adventuresinmichiganwlisa9852]

Cool👍🤓👍. Thanks for sharing. ❤ from here in Michigan ❤️

[@tiberiusa.4009]

Love the accent and channel. Please keep doing what you do. I’ve learned a lot.

[@ericclarington565]

I love your DIY

[@tonyb5453]

Great job

[@johnthompsonii8335]

I enjoy your videos! Keep up the great work!!

[@rl2109]

Nice video, and I even liked the bad jokes that Cranky contributed...! Now I don't feel bad at all telling my grimace-makers! God bless ALL of us! WWG1WGA

[@FishinNStuff]

Lol 😁 thank you . I know they are bad , that's kinda what makes em funny 😁

[@waynegreatone4701]

Enjoyed your video, love the fishin and stuff shirts I bought too!

[@michelebreese5940]

I truly love your shows.

[@FishinNStuff]

Thank you

[@marknelon6958]

We used those up in the PNW . Lead pliers have a post to poke a hole. Easy to use, no lead pot needed.

[@davidgrossmiller7073]

You can change the weight depending on the water flow or situation.

[@GeorgeBurgers-xt5hr]

I really like the practical methods as well as the innovative methods that you show. You know what I mean? You know what I mean!

[@FishinNStuff]

Yep!!! I know what you sayin 😁

[@stevenbennett5221]

I made a mold for 3oz flat sinkers out of an altoids tin and Bondo body putty. Works very well.

[@user-dy6kq3to9j]

Y'all are helpful also thank u for y'all's input I love reading comments

[@joephillips8244]

Absolutely loved the PPE! Gave me a laughing fit! Thanks!

[@FishinNStuff]

Lol

[@robertinabinet7311]

Awesome video

[@duanelappe9767]

Mornin, thanks for the great ideas

[@FishinNStuff]

Thank you for watching it

[@vidili68]

Hi there You are funny. You make my day.. Have a good day be safe.

[@melinda5777]

Loved it! And I love you Lure, 😂😂😅!

[@garymyers4496]

If your voice was getting on my nerves I don't think I would have seen about 75 to 100 of your videos,witch were good as hell. They are very good . KEEP THEM COMING.

[@FishinNStuff]

😁 ol I get haters . KZbin has professional trolls on it lol

[@bg2608ret]

Another Awesome Video!

[@killswitch7775]

I live in Pennsylvania, love your channel and always will

[@jeffjackson5331]

That was AWESOME!

[@jk_wrangler13]

I'm from North Carolina, so it's all good to me

[@gonefishn1975]

Great hacks, thanks for the great video.

[@antonywardle]

Very entertaining!

[@denniskyle7646]

😊 Wow glad to see you back.

[@FishinNStuff]

I'm glad to be back . I went on vacation and when I got back , I got picked to serve on the jury of a criminal trial 😒

[@stephenadams8584]

Keep on a keepin on . With a heavy heart , I’ll go watch sumpin else

[@gordonelsner6638]

You have a great accent and I love your show!

[@jaredfisher1618]

The cocky, fire-tiger-skinned, talkin' lure is hilarious. I love his jokes.

[@Strangernightg]

Not in a million years is does your accent or voice sound funny you're doing a great job at everything you do 💯❤️🇺🇲✌️🙌👍 New York City

[@FishinNStuff]

Thank you very much , that means alot coming from a New Yorker 😀 . I appreciate you

[@MichaelFranke-yt6dd]

This video was awesome!! And I love your accent!! 👍🏻

[@williamvarner1406]

Beautiful

[@edwardhugo798]

I watch all your videos and enjoy your content even the silly jokes. All the way adelaide, Australia

[@gonzalez7805]

Awesome 👍👍👍

[@thomasportell6713]

Good video love to watch

[@CatfishWeekly]

Another great video Keith!!!

[@user-dy6kq3to9j]

So helpful

[@tammeyjohnson9057]

Love your videos!!! I'm just saying. Keep up the great work.

[@andyanderson9165]

Love your vids dude!!!

[@grizzlytreasures1129]

Love your content god bless

[@tork62077]

This channel isssss AWESOME!!!

[@artvance8251]

I really enjoy you channel and get a real hoot from your lure jokes, so thank you very much. God bless you and your family.

[@adamkelley3622]

A little tip from a plumber use the Brass hooks steel will work scuff up with sand paper and put a little flux on it and the lead should flow around the hook may have to add a little heat to the hook

[@manuelfuertes5875]

Lol love the lure

[@Frank-up1io]

Your sinkers are very beautiful

[@lightwiz267]

Screw-in eyelets for the ends. The round eyelet will let you attach the swivel. The treaded end will stick into the lead. You can get the screw-in eyelets small, for picture frames ect.

[@FishinNStuff]

That's a good idea , that's what I used on my no roll molds

[@Fishin-guy]

Just AWESOME AWESOMENESS

[@bobmisner4255]

I enjoy all of your work keep me thinking good luck 😅

[@manuelfuertes5875]

Great show

[@tonywilliams6544]

Awesome

[@richardstewart2680]

YOU ARE GREAT KEEP THESE COMMING 😊😊😊😊

[@FishinNStuff]

Thank you