2 strand ringbolt hitching

In this short tutorial I show you how to do the 2 strand ringbolt hitching. It works well as a wrap for various items. It is also featured in the ABoK under number 3609.
Enjoy the tutorial!
Subscribe to the channel here:
bit.ly/1XrDZXg
If you like this video and channel, consider supporting the site and channel on Patreon:
/ paracord_guild

[@martinmeasures829]

Great video, the disappointment is not showing how to finish, it's OK if your in the know, but many people, me included are novices, hence no idea how to finish.

[@alanwhitsitt5196]

My favorite way to finish any wrap job is using a separate piece of cord. Fold it in half to for a loop that will stick out of the end of your wrap. Wrap the last several wraps/knots over it. Then put the tag ends thru the loop and pull on the 2 tag ends of your separate piece, pulling the tag of your wrap under the wrap itself. Nice clean finish.

[@encendercolores1684]

They actually made a seperate video for that.

[@MrMann703]

​@@encendercolores1684well I just scrolled through most of their video list and did not see one video on finishing. If it is there most people won't take the time to search, how hard is it to show how to finish a wrap when instructing on doing a wrap.

[@johnstarkie9948]

He never shows how to finish.

[@iyeetsecurity922]

Just don't finish it too quickly. You'll end up single.

[@robertoc.9099]

Son todos sus diseños muy buenos gracias por enseñar las instrucciones son claras.

[@nerostrike6563]

thank you for these lovely designs and video

[@JTNorton]

Thank you and very well done video. You focus on what I was here to learn without a lot of rambling. (I have subscribed)

[@patricknorton5788]

Great video. Very clear instructions. Much thanks!

[@sooney001]

Wow! It looks so complex but it's actually so easy to make! Thanks so much for the vid, bro!! 👍🏻

[@robjohnson808]

How long were the strands when you started out and did you gut them (take out the inside strings)?

[@toeknee8052]

This would make a good fishing rod grip

[@DavePawson]

Very clear. Thanks.

[@Vallejo83]

Really appreciate you like this very easy to understand

[@TheKcbarnes]

Yes, please give an idea of how to finish the ends?

[@anakarollyne2447]

I also need to know

[@nobeoddy1664]

great wrap

[@merlet.willie352]

Have many foot, per inch of cord did you used.

[@marinahnamte8838]

Im from mizoram...thanks for this video

[@grantrogan9091]

thanks

[@darrellcanhelp735]

your good at this stuff thanks , Ive watched a few of your videos , I been doing it all wrong

[@ferdoskhan8977]

Darrell The Great

[@MrWhosnext]

How much paracord length would I need for a 42" boat steering wheel with this technique

[@Cam____]

I tightened it after every hitch, but it’s still loose, the hitches move side to side very easily. Definitely not suitable for a grip. Am I doing something wrong?

[@iyeetsecurity922]

Looks _epic_ on my rifle grip!

[@katevane3018]

Beautifil 😘 😘 😘 😘 😘 muchísimas gracias lo ago para forrar lapiceros 🙏🙏🙏🙏🙏

[@michaelbragel34]

Is this still 1 foot per inch? Is it more? How do I calculate how much I need?

[@MrGAETANO25]

Tnks

[@juanquiroz9669]

What ! How do you finish bot ends ?

[@flattop5307]

please add to length of paracord used in your videos.

[@kathispilberg3451]

I too want to know how to finish it off. Looked to the right of the KZbin play list, and there it is!.... "Finish Wraps Binding" by Paracord Guild thank u!

[@mjpena53]

Kathi Spilberg Yes how do you end this technique?

[@check1mate1]

how do you finish the ends? seems like they would be inclined to come unraveled.

[@djsjjd15]

He has a different video for that - search his channel for a video with "finishing" in the title

[@donnyharris5048]

@@djsjjd15 finishing

[@soniasouza6123]

Boa ideia

[@randywilliams5046]

WHAT IS THE LENGTH OF CORD TO USE

[@NickTeri]

How do you finish it?

[@user-df3sk3ey6p]

how did you finish your ends please

[@sherekaan5048]

How did you end it?

[@stevegenzale5206]

I have a walking stick made of polypropylene, which is very slippery. Was thinking about using hot glue or maybe double sided tape to make the braid stay in place. Any suggestions?

[@maleathomas3862]

I don't know about double sided tape, but hot glue easily peels off of really smooth surfaces. I don't think it would work well for this purpose. Without knowing exactly how your stick is formed (hollow, solid core, stalk straight, etc.), it's hard to give a good suggestion. One that might work, though, would be to drill a hole through it and feed one long length of cord through, using each end to hitch. (That might be a terrible idea, but just a brainstorm. Good luck!)

[@pahu47]

On another forum a user suggested using bicycle tube under the wrap. It also has some 'give' to make the grip feel softer. Good luck if you did not find answer yet.

[@MF-le7fp]

Drill a hole through the stick where you want the top of the wrap to be. Pass the paracord through it until you have the strands at even lengths on each side. Do the wrap. It ain't goin no damned where....

[@jeremycastleberry]

I am curious - did you solve for this?

[@tonyfeuerhelm]

...long or short tutorial...I wouldn't know...I'm always on and off ...Pause...Thank you for posting...A.C.Feuerhelm

[@vaporofdeath37]

how to hide the starting ends of the string... I'm guessing you can tuck them back in and cover them up as you build right??? also how do you do the end???

[@williamlauzon731]

Could this be done with 2 sets of hitches on both sides?

[@josiahbahuaud2294]

That would look so cool!

[@richardbennett8678]

how do you finish off the cord on both sides

[@ralanizjr]

Richard Bennett I was wondering the same thing. Do you just simply cut and burn???

[@jluiscc25]

Richard Bennett he have another vid called finishing wraps- binding, he shows how he finish this

[@LimitedInfinity1]

Richard Bennett is there a link to finishing it off.. I cant find the video..

[@WOWKNOTS]

💥💥💥WOW KNOTS💥💥💥

[@Leapdog01]

How much cord per inch?

[@cindyolive7525]

I tried this starting with 66" of each of 2 colors and the wrap was 6" long, so I would say that a safe bet would be to allow one foot for each inch.

[@seranraaj7248]

How long is the rope

[@Paracordguild]

Hey! It depends on what length you want to cover and the diameter of the object. I recommend doing a short test length to see how much cord you use up. Mark

[@user-df3sk3ey6p]

can you please include how to finish, your vids are cool but have little value tonus beginners if we cannot finish

[@oscardaniellopezestrella8631]

DOY LINK

[@williamolliges2622]

I’d use cord fresh outa the package. Finish, and dip in hot water. Going nowhere after that.

[@bluemoon3351]

You didnt show how to finish it..you dont want it slipping off while using it with something sharp

[@vaaanmo]

How to hide the ends of 3,000 devils!!!!!!!!!!!!!!!

[@erykahbadont6605]

marry me, mark

[@markhrabe]

You don’t answer questions do you?

[@stevenhernandez2571]

How is the ending