i have a 50cc moped previous owner scored it up a very good bit(i think they ran it with motor oil as 2 stroke oil) i took it apart cleaned the carbon off everything, honed the jug to fix up the scoring, touched up odds and ends and it fired right up with an insane amount of compression.
@HaXeDick Жыл бұрын
@@bbob5050new piston & rings?
@ThisTimeTheWorld Жыл бұрын
@@bbob5050fresh motor oil doesn't mix well and can be so viscous it starves the engine of oil. Used motor oil might work well if the carb and jets are tuned for it and fuel is mixed well.
@tjr10713 ай бұрын
@@ThisTimeTheWorldwrong
@mikemiller330310 ай бұрын
You got that right brother
@small_engine_repair10 ай бұрын
See it all the time.
@dominichouston955 Жыл бұрын
Working on a Honda Spree scooter that had a bad oil injector. So much piston knock while running you'd think it was a diesel
@small_engine_repair Жыл бұрын
Interesting!
@damianosplay94572 ай бұрын
thats why you always should do the oil injection delete (if possible) and mix the gas with the oil yourself
@OBARRVAGOS2 жыл бұрын
What if it’s a bigger motor like 43 47 cc ?? Is it always good to put tiny bit motor to be safe ?
@small_engine_repair2 жыл бұрын
You can, but running what the manufacture prescribes is the correct way.
@marscobras82813 ай бұрын
If it aint smoking cold start, its not oiley, i run too much, i run a smoke cloud about 5 feet long
@small_engine_repair3 ай бұрын
Alright
@bmint Жыл бұрын
That will not happen if you always use too much oil 😂
@small_engine_repair Жыл бұрын
Yep
@DanteM-l5d Жыл бұрын
😂 Amen. People always get on me about. Putting too much. I rather the bike stay on than to keep cutting off 😭🤷🏾♂️ takes waaaaaaay less gas to get going when you put too much oil lol
@arturos.l.224811 ай бұрын
@@DanteM-l5dusing too much is stupid because it can gum up the exhaust and the spark plug
@DanteM-l5d11 ай бұрын
@@arturos.l.2248 you're correct. Which is why only a little extra isn't bad lol 🤣
@arturos.l.224811 ай бұрын
@@DanteM-l5d 40:1 is a high mix as it is. It can run absolutely fine on 50:1
@marcusbrown7817 Жыл бұрын
What kind of equipment is this?
@small_engine_repair Жыл бұрын
Chainsaw
@vrmrentalspressurewasher28424 ай бұрын
I think it was poor maintainace and stuff getting in d engine
@gravityloose2 жыл бұрын
Hello, my brother accidentally put a semi synthetic 2 stroke mix ratio of 80:1, he put to small oil. One tank was used on a not full throttle, a new chainsaw to break in. Has this couse damage? Thanks
@small_engine_repair2 жыл бұрын
Pull the exhaust and inspect the piston, rings and cylinder. I would do a compression test as well.
@gravityloose2 жыл бұрын
@@small_engine_repair I did it look OK, have done some cutting and runs fine, have a video with muffler off kzbin.infoBGZjuB_zyew?feature=share What you think?
@small_engine_repair Жыл бұрын
@@gravityloose looks good
@gravityloose Жыл бұрын
@@small_engine_repair Thanks👍
@TobiasTheArtist11 ай бұрын
Does pulling the cord move the piston? For whenever I have to clean that spot?
@small_engine_repair10 ай бұрын
I dont know what you are asking.
@D-Mayor Жыл бұрын
Doesn't look that bad. Piston looks a bit scored but ring & land don't look melted/destroyed.
@small_engine_repair9 ай бұрын
It was bad
@jaks1629 ай бұрын
I run everything on 40:1 for this reason
@small_engine_repair9 ай бұрын
I always check the manual.
@jaks1629 ай бұрын
@@small_engine_repair I just have some stuff that runs on both 40 and 50, I’d just rather have too much than too little
@Picorico2X Жыл бұрын
I need to stop being a poos and open mine up before I get this big bore kit
@small_engine_repair10 ай бұрын
Poos?
@Romaan. Жыл бұрын
Not really carnage if the cranks still moving 😂
@small_engine_repair Жыл бұрын
I guess so :-)
@sahilsquadron228611 ай бұрын
@@meganwyatt1607lol looks like it has plenty of compression, on the otherhand i can start my yamaha yzf 80 2stroke with a single finger i kid you not 😂😂 idno how it still runs ngl.. has absolutely no power and i need to rebuild it so bad haha