2-stroke X3 gets ripped HARD and races Doug's Turbo Pro XP RZR!

[@christopherellis2273]

Nylon strap nets for floors. It would remind me of the classic banshee nerf bar nets. It would be light and mostly safe and you could still see through.

[@TylerTheBassCreator]

And be super easy to clean

[@mrFoxYou1]

Great Idea

[@jacobcrothers1792]

Yep. Thats the answer right there. This needs to be top comment!

[@brianlee107]

I Just came here to comment this. Exactly what I thought. Great idea.

[@anthonyviau1]

+1

[@Lfrperformance]

Pipes, porting, proper squish, timing, and methanol. That this is gonna have some serious get up!

[@McDoobles]

Somewhere out there exists a deadly clutch setup.

[@d26-i4b]

It doesn’t even sound like it’s hitting the power band and still rips

[@acherontiaatropos1]

@@d26-i4b I don't think it is im guessing that's the clutch

[@brianjacobs1241]

Pipes are the biggest thing I had a 10 mill super cheetah cub ported stroked it wasn’t until I paid 1200 for a set of pipes on my banshee is when I made huge power gain

[@brianjacobs1241]

Congrats on the new girl hopefully she is top notch 👌🏼

[@ostacruiser]

Pipes and a proper tune and she's gonna surprise a lot of people 😅😅❤❤ Kick ass! #weightreductionlvl9000

[@thedude7726]

Hell yeah!

[@robbygray9562]

Pipes and tune and some port work and itll be a freaking beast man!!! I was amazed at what some pipes and a dune port did on my Banshee.

[@zachaliles]

Gonna break a lot of hearts like the banshees do.

[@McDoobles]

Oh ya, even leaving off the line with a little RiPeMs would have made a difference. The 2 stroke should smoke a lot of machines in the first couple of feet.

[@mikenorton62]

Yeah, there's alot left in that engine, it isn't running good at all

[@zachaliles]

Put some nets in place of the floor boards like a set of nerf bars on a quad.

[@AlbeeSoaring]

Exactly forget the lexan idea.

[@SWEETSIDER]

if you're ever in the bush that's a terrible idea lol.

[@teakdougyfresh9528]

Doug's smile everytime he start the can do makes it that much better

[@chadbanks7611]

BIG CONGRATS TO NICK YEAH BROTHER

[@jamesswick7534]

Congratulations on the engagement!

[@KC-7mm]

I mean this in the best way possible.. the can do x2 has to be one of the best hillbilly inventions I’ve ever seen watching sous rip that thing made me laugh so hard gonna just go ahead and say it’s my favorite x3 to date lol. Well done Douglas well done

[@glamisfanatic]

instead of the lexan do nerf bar netting, throw back to the old school atv days

[@imdabeast100]

That would be sick. I know it’s a sxs still but makes me think of a gnarly sand rail or something

[@THESLlCK]

lexan is pretty awesome though

[@brettbaratheon9776]

So, this is the original unit they built for Cleetus that he flipped, right? He took the parts off for the new unit?

[@evanosantoski]

@@brettbaratheon9776 it hit a culvert I believe

[@brettbaratheon9776]

@@evanosantoski but this is the one they made for him and Rick brought back right? Cleetus must have parted it out and took off all the mods they installed.

[@johnnykovich9338]

I just don't understand how u guys only have less than 300,000 subscribers. I love all the vids and feel u should have way more than that. The content is way better than alot of these other big names out there. Hopefully it'll a soar soon enough.

[@tylerfelske8547]

Keeping with the 2 stroke theme put basket mesh floorboards in the can doo x2

[@asylumental]

Rough day for me, super happy that you all uploaded.. always make me laugh. Thanks guys

[@TheCoopa87]

the pull start makes me laugh every time.

[@allinaday3526]

We need to see the two stroke x3 on the Dyno before and after the new pipes are on!

[@H03tRiLL]

Bros go on ebay and order some premade carbon fiber sheets for the floorboards. Keep the lightness factor going. You could also buy raw materials and lay up your own carbon pieces but its kinda a pain.

[@timpartain1301]

Wow. Knew it wasn’t slow but didn’t think it would hang with the Pro XP. Really love this build. Way to go

[@kenleppek]

Oh wow that thing pretty damn fast. Can't wait for the pipes and other goodies.

[@Nevertrustalawyer]

The Arctic Cat Thunder Cat snowmobile had a 1000cc triple, rated at 175hp. I also think some Wave runners had 1500cc triples, not sure of the hp. Since ya can’t run a turbo, there’s still NOS, as an available option?

[@dingakasteve]

Leave the floor open and it’s now the “Ya-ba-da-ba-2”

[@wrenchandrip]

Dougie rolling up in his machine with the hat backwards was a real throwback

[@maxizzle]

when it's almost July and you know that means Cleetus must be coming back to sxsblog!

[@brettbaratheon9776]

Hope so!

[@theadventuresoftroy8109]

Was NOT expecting the can-do to be that big of a contender to the pro xp! Holy crap that triple makes good power!

[@willriley1262]

Cant wait till it’s complete, and see it rip at Silver Lake drags. Just hearing a 2 stroke will freak people out. Great job guys.

[@speeddeamon188]

1: congradts Nick!!!!!! 2: the discombobulater rippps!!!!!!!!!! you guys need to make that the fastest 2 stroke possible

[@stevefendelet2871]

This is reminiscent of how CF1 evolved. Very exciting! Sous’s reaction was the best! Had me literally laughing out loud. I love shit like this!

[@AntiPattern328]

Make sure the fuel cell gets put where it evens out the front to rear weight ratio.

[@brentboyce2959]

Congratulations Nick Sous and the future Ms Sous. And a great video as always.

[@outdoormanBC]

"Wowzerz" Doug.

[@WestCoastinSupply]

My favorite channel by far. Love the vibe every-time gents.

[@joshhopper6109]

That thing is awesome. Something magical about hearing two-stroke sound come out of a side by side. Can't wait to hear the new pipes and see the difference in power. I've seen a couple of banshees and what a good set of pipes will do to those.

[@ericmorin9613]

Nick- wow zero floor boards. Also Nick full send on the track less than 20 seconds of seat time on it. Lol that's awesome

[@NorthwestTiffany]

Hahaha! Two stroke by your head, also very exciting 😄 Congrats, Nick! 🎉

[@quadjbb]

I just love that 2 stroke sound. Can 2 is my new favorite sxs to watch followed by the 2J. Keep up the great work Doug....and the boys of course.

[@33LeRoy33]

When I was a kid my dad had Honda Odessey go cart with a Polaris 700 triple it was sensational for its time and this is basically the modern version and I love it!!! Great build I’ve been so excited since the first announcement!!!

[@MrPagargar1]

I can’t wait to see this tuned up and in the dunes

[@kene6838]

That sound reminds me of a LT80 I built for my daughter back in the 90’s. Also you will find a lot of that sound actually comes back thru the carbs. Nice job guys

[@SuperBigdanno]

True there is a lot of intake noise on those 2 stroke engines.... adds to the sweet sound. That said it will sound better and more important make more power with the new chambers and mufflers.

[@mattmanyam]

Rave valves prevent most of the carb "blow-back" on the rotax.

[@SuperBigdanno]

@@mattmanyam wrong side of the motor there bud, I think you mean reed valves.

[@mattmanyam]

@@SuperBigdanno aaack! I meant the rotary valve, not the rave valve.

[@SuperBigdanno]

@@mattmanyam close! Sorry to keep correcting you but the triple cylinder used a reed valve not rotary, those were on the twin cylinder engines. Some of the rotax engines also used piston port.

[@TRASHWILL]

Congrats Sous proud of you man! Biggest commitment ever but it’s so worth it!

[@adrienfortin4411]

You know the best part is when someone pull starts it gets me every time

[@homerreeves7039]

You guys are crazy! I love it! Way quicker than i thought it would be

[@anthonyaubuchon765]

Congrats Sous. This build really suprised me. I just thought the machine was going to be way to heavy for that 2 stroke . Pleasantly surprised. Should have never doubted you boy's. Looks like a blast to drive

[@rmksledhead63]

Love this build but I'm not sure why these results would surprise people. A well-tuned piped and ported triple 800 is good for a solid 190hp, more if you spin it fast enough. That plus the weight reduction gets you an awesome sounding beast of a machine!

[@windshieldwizards]

Love it! Wasn't expecting it to be that quick! Can't wait to see what Doug does to it some more

[@swissmochaj]

You guys live in the land of badass snowmobile dudes. Lots of knowledge in Michigan on how to get the most out of those old triples! Braaaaaaaap!

[@chrisjtal21]

This is freaking awesome! Please never change the pull start. By the way Congratz Sous!

[@rabid_1]

Sous is legendary.

[@paulsinger2539]

Brougt back Fond memories of ripping my banshee through glamis in the 90's, 2 fingers on the clutch, keeping her in that sweet spot, toomey's screeming.

[@SXSBlog]

T5’s for lyfe

[@mje19D]

Congrats on the engagement buttercup!

[@gtm624]

I love all the other guys as well, But No other channel gets me laughing as much as you guys. Much love.

[@Nordspets]

Damn this thing is sweet! If the SxS’s were introduced at the start of this millennium this is what it would be!

[@troyb4727]

Congrats to Sous on the engagement!!

[@ultimatedriversofmachinery]

Bruh leo really said “it flies so good” after it nose dived into the ground over the triple

[@screamneagle8420]

I thought the same thing. He must’ve seen something we didn’t.

[@mikeharlow2908]

Congrats Sous! Can’t wait to see more of the CDX2! Hope you guys bring it to Little Sahara UTV Takover in Sept! Looking forward to meeting you guys!!!

[@johnmichaelhall2207]

The Discombobulator Is F#$Kn EPIC . SWEET BUILD GUYS

[@thatdirtylife8685]

This 2 stroke build is one of my favorites and i love all the stuff you guys do!!

[@jerrybowman5546]

Sous will drive the hell out of anything, he gets in awesome

[@D4mo2612]

Put some tail pipes on the exhausts to build more back pressure in the expansion chambers. The more back pressure the more power. I've always had two stroke bikes.

[@robbygray9562]

Its not the silencers that are real important, its the stinger length. Thats why drag pipes dont have silencers

[@D4mo2612]

@@robbygray9562 then you don't know how a two stroke engine works. The bigger the expansion chamber means more power, but you need an end can (muffler) to hold that back pressure. That thing would kick ass if it had tail pipes. Google sammi miller two stroke exhausts. A huge expansion chamber with a small end can.

[@SuperBigdanno]

The size of the chamber does not always mean more power, you can tune for high,mid or low rpm and that partly dictates the size/shape of the chamber. The stinger also lets you tune to particular rpm but without one at all you usually run out of power about half throttle. Muffler itself really does not matter on a tuned pipe as they are pretty much straight through and just knock the noise down to comfortable-ish levels. If younreallybwant some good theory on this then read anything from Olave Aaeen on the subject. Two cycle engines are wonderful in the amout of ways you can manipulate them to get power or make power where you want it but because of this are very easy to screw up too.

[@drewjohn8554]

Alright we get our comedian back also the best SxS driver ever gotta have him. love all of you though

[@erikcolon413]

Congratulations on the engagement Nick!!!

[@christopherwagner5643]

He pulks off the line that 2 Stroke evan pulls on the midrange. Good job doug and you guys got a nice machine east to work on and around the base of the chassis little ripper.

[@spcneary]

Best project idea yet! The theme of this build is a step in the right direction IMO, everybody is adding power and forgetting the weight is the only reason you need it in the first place.

[@anthonyestevez118]

"Ya ya sure ya sure ya sure" 😆 Great content as always! So fun to watch! Thanks for sharing!

[@TheRedMenaceR]

DUDES, I SERIOUSLY LOVE THIS THING!!!! I cant wait to see the updates, especially when you move that fuel tank. I feel like the nose is dropping a bunch because of that location and I know itll grab even better out of the hole with that weight back there. Im also not a suspension guru, but I think its a bit soft. Congrats to Nick on his engagement, love you guys, keep it up!

[@timcarter8664]

Man, I watch your guys videos like clockwork... Makes me want to sell my new house, and quit my 6 figure job as a software developer to come work with you guys.

[@scho45]

Matthew Boba...such a wholesome guy!

[@alexjust2333]

I guess since it came from cleetus, it is fitting that it looks like the leroy of side by sides

[@petekleinschmidt4251]

Congratulations Sous! Great video guys love the two stroke!

[@lukecrumrine7517]

Congrats Sous that’s awesome man!!!! Happy for ya

[@METALfanUSMC]

Biiiiig Commitment GUY! Heck yea dude!

[@harlandmcnall2579]

Pull starting a sxs never gets old!!! Lol

[@KosmicHRTRacingTeam]

That 2 stroke looks sick, so much lighter and probably way more fun to drive.

[@joshuajackson8142]

I would like to see that beast on the Dyno!!!

[@RandomRedd]

18:38 wow, I was not expecting that at all haha

[@williamdubyaog1334]

I can’t wait to see where the CAN DO X2 goes especially with more power 😎.....well done guys !

[@WayneHatfieldBrotherRidge]

Put the hard Teflon liner they use in dump truck bed s for the material will slide out easy very durable and lightweight.

[@jchap9115]

Congratulations Sous. Hell yeah brother

[@cooltechdreamer]

Congratulations Sous and future Mrs. Sous! Great video as always.

[@fordracing351w]

Congratulations souser!

[@shawnrobinson460]

Congratulations sous.

[@beatymcfierce9436]

DOUG!!!!! Get on it man. Ready to see what that thing is capable of. Cant freakin wait!!!!!!!!!

[@insideroller]

Great Video Guys!! Looking forward to seeing more out of the 2 can. Better pipes/muffler will help a ton, especially with sound. You should call Pro Circuit to see what they could do to help with the project. They know how to pipe a 2 stroke.

[@welderteach]

Congratulations sous!!!, I can’t wait to see the x2 at her full potential. Very cool build

[@armedpreacher]

Super impressive! There is just something about a 2 stroke that I love so much. I’d be hard pressed to buy a 4 stroke turbo over a legit 2 Stroke

[@neonnick2]

Congrats on the ripper and the engagement!

[@viprgaming641]

Fun machine! Wish we could smell the 2 stroke exhaust! Congrats Sous on your engagement!

[@turbodean4843]

Love this build because its custom, hope to see it rip soon.

[@dalesauget7568]

Congratulations Nick to you and your lady

[@jennifergenis1936]

Congratulations Sous! Wish you the best!

[@fredrickheinecke3640]

A lot of us Dune guys used to use expanded metal for the floor..

[@otm646]

There's no reason to run expanded metal, 16 gauge is 2.6 lb per square foot. They're going to add 10 pounds to the thing putting in proper floors. Well worth the protection.

[@everythingloud4068]

The sickest sxs on the internet!!! Good job guys! I need this for my daily driver up here in Montana😅

[@scottberry9315]

That thing rips!!! Awesome job!!

[@deanretzlaff2253]

3 cylinder 2 stroke engine has about 140 hp stock..of course the x3 body weighs more then a snowmobile but it’s a baseline to start..keep it going love the videos..I’m sure Ostacruiser loves it..lol

[@skylermummert24]

This is gonna be the greatest car yet

[@chrissmith7364]

You guys are great 👍 Also, good to see sous back

[@christopherortega5867]

Used to have a sandrail with extended diamond metal mesh as a floor.....Worked great never got high centered,worked like a cheese 🧀 grater on dirt or sand mounds.....plz look into it I think u guys would luv it

[@tnross23]

Congrats sous! Matthew actually looks very concerned about the punishment and new purchase! 😂

[@Siddy22]

Can't wait till its at its full potential

[@mfw3044]

After hearing you guys go on about Taco Johns multiple times, I came across one Saturday and had to give it a try. I must say I was not disappointed, it's far better than taco bell.

[@HorsepowerHeadquarters454]

Congratulations. I can't wait to hear it tuned!.

[@kreativepowersports4688]

Absolutely love the 2 stroke

[@derfernerf]

Congrats Nick!!

[@MattySlice21]

I want to race it in my pilot 700 swap when it's all tuned in! I live in Michigan also!

[@MattySlice21]

Also when the candoo is tuned in. The pilot is ready 😎 missed race day a couple years ago because of work

[@craigbielsky115]

WHAT 700 MOTOR DID YOU USE ?XC700 TWIN?

[@MattySlice21]

@@craigbielsky115 Yamaha sxr 700 triple! I have videos on my channel of it