2000 - 2009 Chevy Impala How to remove Transmission

[@billyhighfill]

Bro. You were so hyped during this tear down. DONT PLAY WITH ME. BOTH TIRES 😂😂😂. bro. Love it. Great video. Thanks for sharing!!

[@AxtuoAx]

Haha, I can't help but get hyped when tearing things down! Thanks for watching, bro!

[@jhonalva8230]

GREAT VIDEO INSTRUCTI0ON bROTHER. Thanks FOR SHOWING US HOW TO DO THIS.

[@AxtuoAx]

You welcome

[@bryan1956]

Was gonna buy a 2008 Impala ss to flip, but I'm not putting myself thru this. Thanks for the vid

[@johnstanfield9613]

This is been very helpful thank u for making this video.. I wouldn’t be able to do it without it

[@andrewvela1149]

is this better/easier than pulling the motor and trans together from the top or dropping the engine and trans with the cradle

[@brandonreed7151]

What did you take before recording this

[@kiwiflagcarllc6236]

Meth lol

[@Lastyoutubegosh]

Coffee

[@vidalsmith9160]

Lmao😂😂

[@Monkey-xp5ee]

I read this comment before watching the vid, 2 seconds in…

[@lawnmowermanTX]

Pixie and Twinkie dust when eating a super glazed donut 🍩

[@SarahGonzalez-ko1kt]

Man thank you for showing us all this I’m changing the same transmission and this video was a lot of help thank you again 🎉🎉🎉

[@AxtuoAx]

“Hey everyone! If you appreciate the content and want to contribute, look for the ‘Thanks’ button below this video, and click on it. Your support helps me keep creating videos. Thank you!” 🙌🎥

[@silver_salvage_savage]

Do you transfer the dipstick to the replacement transmission? Im trying to salvage a trans and i dont think ill have the clearance unless i remove it, just wondering how its mounted

[@investmince159]

This is how I talk when I work on cars

[@AxtuoAx]

Ok.. 🫵😉

[@marshallmcfarland7555]

I like watching you remind me from the guys from the neighborhood

[@AxtuoAx]

Much love ...... pause..... 👋😉

[@ericknoblauch9195]

I used to have two Impalas. One was a 2003 LS with the 3.8 V-6, and the other a 2005 with the 3.4 V-6. Both had to have transmission replacements. When you reach 65,000 to 70,000 miles the transmissions are junk. The Chevy dealer, and Buick dealers service department tells you there is a clutch inside the transmission that wears out that engages the first gear. They also say they all do it. The same transmission also appeared in the Buick Century, Skylark, and LeSabre. Some people think the problem is a cheap fix solonoid, but it is not that.

[@Omgkhii]

This ^ I’m going to be carless for a gooood while thanks to the 3.8 trans. I barely passed 100k on the engine and trans before it pooed

[@edocsil1635]

Do you change the filter and fluid at 50k miles or less?

[@ericknoblauch9195]

@@edocsil1635 I was changing the fluid and filter every 25,000 miles. That did not help. The transmission is the 4T65E, and is prone to failure. The clutch inside the transmission wears out.

[@edocsil1635]

@@ericknoblauch9195 damn that fucking sucks

[@jaybird3651]

I'm at 215 and trans just started slamming into gear and then be smooth at times with long shifts mixed in which getting a power train code for, but I love my 3.8l she still has life did upper and lower intake, valve gaskets and was gonna go timing chain and apparently transmission but debating line of attack here, any suggestions appreciated

[@michaelsmith3226]

Thank you for the video I'm working on a 2006 right now it's a lot of help.

[@williamluther8024]

Currently diagnosing a non working transmission in a 2010 impala. I have a feeling I'll just be replacing it. Great video. Do you think you could've gotten away with sneaking the transmission out without dropping the cradle?

[@AxtuoAx]

No no no.....you have to drop the cradle. There is no other way. Thanks for watching 👀 🙂 🙏

[@andrewvela1149]

@@AxtuoAx did you put something to hold the motor up when you took the cradle off or is the 2 remaining mounts enough?

[@williamluther8024]

@@andrewvela1149definitely need to hold the engine up when dropping the cradle.

[@jaydeeee668]

About to do this tn. 2005 SS. Fingers crossed

[@AxtuoAx]

Good! Have fun! More power for you. Thanks for watching!!!!

[@jaydeeee668]

@@AxtuoAx slid the trans out the driver side but I followed the video for the rest! Wasn't too bad at all.

[@AxtuoAx]

What did I tell you? Good job!!! SUPPORT THE CHANNEL!!!

[@jaydeeee668]

sadly, I'm back, torque converter went so removal pt 2@@AxtuoAx

[@Andrew-sh5xs]

May be can you help me, I have impala 2007, can I install transmission from 2006 or 2008 year?

[@AxtuoAx]

They are different series. Although, you can try it if they match

[@Babiii3_T_Thr3at]

I have a 2004 chevy impala base 3.8L v6 and when i go to drive it ill put it in drive then it slowly move are i gotta push it to move then i have to push on the gas more than what i should have to is that the transmission are what because when i scan it the only code that pop up is p0420

[@matt.604]

Does it go in reverse? Does it go when you select gear 1 ? If so then probably the forward band is broken. Very common problem with this transmission.

[@jameybarisoff]

What trannies would work on a 2008 impala ss with 5.3, what years and trim levels will work if I get from a junkyard?

[@dalemckinnon612]

Do you have a video installing a transmission in the Impala

[@AxtuoAx]

The same way you remove it, the same way you install it, and that's it. I'm so glad you liked this video. Do me a favor and DO NOT SEND ME MONEY. I DO THIS SO YOU LEARN HOW TO DO IT AND SAVE MONEY. thanks for watching!!!!

[@sterlingwitherspoon5709]

GRRAT DETAILED VIDEO BRO!!!

[@AxtuoAx]

Appreciate it! Tell me about your experience... Where you from? Super thanks!

[@kendra9852]

Have a question what tools do I need to remove the transmission out of the 07 Impala? 3.5

[@AxtuoAx]

Did you watch the video? Yes? Good....because all the tools you need are in there

[@denisramirez8127]

I really like you your videos they entertain and are funny make more homeboy

[@AxtuoAx]

Thanks, my boy....pause

[@Its_juice17]

This it the same for any model between 2000-2009???

[@AxtuoAx]

Yes they are...8th generation 2000-2006 and 9th generation 2007 - 2015!!!! Thanks for watching!!!!!

[@michaelgomez2667]

My fucking transmission went out lmao thanks for the help compa💯

[@AxtuoAx]

Sucks...know you know what to do

[@strothermartin5368]

Chevrolet should have had a recall for their transmissions

[@rack_9]

Where did you learn to become a mechanic,was it self taught and you had to mess up to become good or did you go to trade school?

[@AxtuoAx]

Very very Good question! AA in Automotive Technology is one.........what else?.....ehhhhh ... you should invite me to your show!!

[@jakethekid7255]

I been trying to find a video of the neutral safety switch so I came here just to see if I just pull the transmission I can see it

[@jaybird3651]

Which side, the neutral safety switch is connected to the steering colum area, replaced blinker/brights/cruise lever and believe it connected to that harness if not its right there on backside of steering column more to passenger side

[@satochinakamoto6129]

How many hours did it take you to do that?

[@AxtuoAx]

I wanna say, I took me 2 hours, maybe a lil less than that. It was fun. When I explain things, it takes me longer than without explaining. It depends on the project, of course. Thanks for watching! Hope you like it.!

[@satochinakamoto6129]

@@AxtuoAx Most people don't realize the level of difficulty mechanics have to go through. Very impressive.

[@AxtuoAx]

That's true...I was talking to my friend about that yesterday

[@crypticworld7400]

@@AxtuoAx thank you for this video

[@tptpaine4]

Just bought the same exact car basically just 3.8 instead of 3.4

[@anthonywilson2060]

No homo I fuckin love this dude fuckin loco thanks bro

[@AxtuoAx]

🫡

[@jacobhernandez5165]

So no need to hold the engine up from the top?

[@AxtuoAx]

You must

[@Beefarony]

He mentioned that he placed a bar on the top somewhere, but never showed it

[@hhgspade1]

Had me crying yo were the hell is your shop

[@AxtuoAx]

Why you 😢 😭, dawg?

[@anastasiolanda9729]

Is the same on a 3.8?

[@AxtuoAx]

Should be

[@williamvaughn3103]

I have taken them out without the cradle but it was more work trying to find a short cut and that was the one that I pulled to replace the one I had in my car. I would never do that at work and I rather do it on the floor so I only have to bolt the cradle back up and I have pulled the those engines from the top. I went to school to be a mechanic but still fucked up a ton of shit when I moved up from lube tech to mechanic and thats pretty much how it goes for most people well males female mechanics from my experience seem to mess up less I guess its the way their brain is wired but after a few years of doing it on a daily bases it gets easy you don't really see it at first but others do and by then you realize you should have picked a different profession. I LOVE ETERNAL COMBUSTION AND I HATE TOO.

[@AxtuoAx]

Thanks so much for the knowledge and for sharing your experience, my boy!

[@Jeremy-kp8eh]

Good video

[@AxtuoAx]

Glad you enjoyed Thanks for watching 👀 🙂 🙏

[@Zakariabaiza]

Very nice but your camera make me headache too much moving

[@AxtuoAx]

Sorry about that

[@jaybird3651]

U manhandled the throttle body although in my 3.8l way more clear connected to upper intake

[@joeberg9823]

Maybe set a camera back a bit to video. Your head was moving around too much and fast I felt like I had Vertigo. Not a complaining thanks for the video just a suggestion. This was vey hard to watch and I had to fast forward most of it my head was spinning.

[@AxtuoAx]

Thanks for watching....you know you can slow the speed of the video by a notch if it's moving too fast. SUPPORT THE CHANNEL!!!!!!!

[@satochinakamoto6129]

The camera moves so much it makes me dizzy.

[@AxtuoAx]

that happens when I wear the camera over my head. Plus, I was moving fast. I like projects like this.

[@dilannavarro-br2ff]

Hablas mucho y no explicas nada

[@AxtuoAx]

Maybe I should consider a career in auctioneering with all the talking and no explaining!

[@patrickholland5351]

A Nut

[@AxtuoAx]

Pause

[@sterlingwitherspoon5709]

You trying to hard to be hip my boy! 😢😂

[@AxtuoAx]

🫵😉

[@williamvaughn3103]

Sounds like a mechanic or should I say tech doing a video sounds like most guys in the business to me but what I think dont matter but the video was good enough to help people that have little or no experience remove a tranny I wish I had this tool when I was a kid. Great video it should help my nephew out while I watch him take a few days to get the same job done.

[@AxtuoAx]

Thanks

[@sterlingwitherspoon5709]

Nah it’s funny as hell 😅

[@Zakariabaiza]

Sorry I can’t watch more the camera 🎥 too much moving

[@AxtuoAx]

You could slow down the speed of the video in settings, maybe that helps

[@jquest1625]

You talk too much instead of just making a video!

[@kiwiflagcarllc6236]

Are you a tweaker?

[@AxtuoAx]

Sorry, I dont tweeter

[@kevthemechanic5595]

Too much camera movement and uninformed talking

[@AxtuoAx]

Did you know that you can slow down the playback speed??? Thanks for watching 👀 🙂 🙏

[@narwhal9852]

too hard to watch with the cam moving the whole time

[@AxtuoAx]

You can go to settings in the video and reduce the video speed. Thanks for watching. SUPPORT THE CHANNEL!!!

[@tristahardin5002]

I can’t get my damn control arm off I don’t have that tool but even with a hammer ain’t moving nothing

[@AxtuoAx]

Maybe the control arm has a mind of its own and just doesn't want to leave!

[@BestPriceSunCoastTransmissions]

Way too much time explaining what he’s gonna do and two little time actually doing stuff

[@geeznutz7757]

True nyc skit yo

[@geeznutz7757]

True nyc skit yo