2000 INTERNATIONAL 4700 AMBULANCE PT5 BUILDING A CUSTOM HITCH!

THIS IS THE LAST PART IN THIS SERIES. WE GET THE WHEELS BACK FROM SAND BLAST AND PAINT AS WELL AS THE 6 NEW TIRES. ONCE THOSE ARE MOUNTED, I GET STARTED ON THE HITCH. IT SURE TOOK ME LONGER THAN I HAD HOPED TO BUILD THIS.....I'M NOT A WELDER! AND IT SHOWS IN THIS PROJECT. NON THE LESS, I GOT IT ALL FINISHED UP AND THINK IT WILL BE JUST FINE. HOPE YOU ENJOY!

[@SouthMainAuto]

You remind me so much of my dad it's scary... I think you two would have gotten along just fantastic 🙂

[@j.c.smithprojects]

not sure how to take that! i remember stories of you and your dad...

[@robertmccullagh8820]

Yes Eric O watching along how awesome 👌

[@25vrd48]

Really enjoyed the series of videos , your work and welding are great . Truck turned out great . Awesome videos

[@mwilliamshs]

Nice job. Only think i'd do different is have a 90° flange bent outward on the bottom of the rear brackets.

[@bobt5002]

Great job looks nice.

[@tennesseetrucker9622]

Nice work as always.

[@chuck020950]

#1

[@johnnyholland8765]

You keep saying "I am not a welder" but I am telling you I have seen work done by "welders" that doesn't look as good as your work. Don't sell yourself short. You are a pretty damn good fabricator...

[@j.c.smithprojects]

as you saw, i struggle at times. i will keep working to improve.

[@armandoperez6673]

Compare to other welding works i've seen i think your work is better than their's.. Don't worry sir, a little more work and you'll be better.because of what i see on you is you keep on doing things the best on your knowledge and capability. Keep up the good attitude.

[@BobPegram]

You should see his son's welds! They are just lovely, but welding is not his main focus. I hope he can always weld that well for his own projects. Of course you can guess who taught him! 8-))

[@throttlebottle5906]

his bird-poop, looks like million dollar bird-poop compared to mine :))

[@peterdrake2316]

It’s amazing how simple clean and nice the hitch is when no engineer is not involved 😀😀

[@gregbrown4962]

I like how the design of the hitch and rear bumper all came together to give the truck a factory finished look. Your instincts were right on point.

[@HODGEPODGEDODGEGARAGE]

That hitch looks *fantastic* J.C! 😀 Nice and stout! Back on the road for him to use and not have to worry about. Great job with the repairs 🙂🔧

[@localcrew]

That trailer hitch and bumper turned out great. I think you’re a better welder than you think! 👍

[@Ezrider359]

hitch came out very nice. should be stronger than what that truck could pull by a good margin and it looks good.

[@j.c.smithprojects]

i think it will do just fine. he only plans to tow 7,000 to10,000 lbs,

[@kennethsaville7451]

J.C. Stop it, you are a great welder. I've known a lot of them during my 75 trips around the sun and you do fine. Wonderful job on Justin's rig.

[@j.c.smithprojects]

nah.....it is getting better but i still struggle.

[@b.a.lineman7582]

As “welders “ , someone who can weld or, someone learning to weld… we are our own worst critics… you’re spot on J.C. Anyone that says they lay a perfect bead every time either isn’t being honest with you or themselves… it’s a constant journey

[@bobpowers9862]

Looking good, there. Over-engineered is the way to go, with towing, IMO. Nice work.

[@b.a.lineman7582]

If it’s worth buildin … it worth overbuildin…💪

[@highjix]

sorry to ask here, but I hope the creator sees this, but what ever happened to the truck you where building for your friend? unless I am blind as a bat, I can't find anything on the completed budget rolloff truck

[@j.c.smithprojects]

its on hold because of some changes that he wants to make.

[@SuperBassAdventures]

I feel like watching Jody(sp?) on weldingtipsandtricks for a half hour on YT, is going to ease those few apprehensions you have. Welding the back sides first, for practice helps me out too. Keep up the good work! Brett

[@billmoran3812]

Few people would put that level of craftsmanship into a project that was just to help out a friend. First class.

[@j.c.smithprojects]

i believe your quality of work should never change based on your "compensation". you either have standards or you dont... right?

[@haroldphipps3457]

@@j.c.smithprojects you are correct sir !!!

[@mechanicmike1236]

Gotta love grandkids! Stuff they do always puts a smile on my face! Take care Mr and Mrs JC

[@kevinlamarr1424]

Those wheels really set it off!

[@alkennedy1124]

You need to steady your hands against something, and kick all distractions out of your head and from your ears, and oscillate the stinger ,and trying to be evenly speed wire and stinger, Your welds are a lot better then a lot f people’s chickens scratches, look good to me , thanks BigAl, I would of left it , your welds are fine, you are a welder 👨‍🏭, , nice thanks BigAl California.

[@psavel274]

I've told you before J.C. and I'll tell you again... for not being a welder you sure can stack those dimes pretty damn nice!!! Great job on the hitch it's super beefy, and I don't think he'll be disappointed at all. Wheels look nice as well. Really cleans up the look of it. 👍👍

[@j.c.smithprojects]

i was very happy with how the wheels came out.

[@shanesooth6267]

Sweet job JC turned out nice and the welding looks great.

[@jpsgarage2020]

I am excited. And very impressed with the work💯. Forever and always grateful for the help

[@j.c.smithprojects]

cant wait to see the old girl towing that truck of yours.

[@jpsgarage2020]

Thats the plan. Ill be out soon to get some trucks rolling for you

[@armandoperez6673]

Good morning mr. Jc.. Just a little tip regarding the slack/wiggle on your milwaukee mag... Maybe you can put a thin tin spacer on the rail guide? Thin/thick enough to reduce/eliminate the slack.? I have tried it with the rail guide of my friend's router guide. And it worked good enough. I Hope you find this helpful.

[@paulresca6681]

Another well built truck. Looks great and I’m sure Justin will love it.

[@davewhittington1368]

That is a beautiful piece of work JC 👏 welding is top class no matter what you think. Thanks for sharing. Stay safe 🇬🇧

[@beardedwelder]

Hey JC, enjoy you videos. You should try to weld those verts on the receiver up hill instead of running it down hand. You just don’t get enough penetration running a down hand. Vertical welds are where all your strength is.

[@j.c.smithprojects]

i keep trying uphill. still struggling. i figure my downhill is better than my uphill right now.

[@fordmuscleluis9710]

Good video On Mounting a custom hitch for this 2000 International 4700 ambulance I enjoyed the video

[@MC-ft8zv]

Well, for someone who is "NOT a welder", you sure do a beautiful bead. Personally I find decent, quality welding looks like fine art, and your welding sir, is fine art. Love the fact you think everything out so much, and engineer it so stoutly. Be proud of your welding, and show it off, because its beautiful...and love seeing the heat penetration stains. not a welder..pfftttt!!

[@chuck020950]

Watching videos does not tell the whole story on how many hours you have put into this overhaul. Any idea on hours spent on rig?

[@j.c.smithprojects]

no idea. probably dont want to try and figure it out either.

[@bigredracer7848]

12👍's up JC thanks again for taking us all along with you

[@davidsnow1481]

Great finished project looks awesome thanks for sharing. Keep up the good work and stay safe out there.

[@the.porter.productions]

Greetings from the Ohio Porters.🤩 Thanks for the good picture of the hitch. It sure got my attention and I had to pause from my schedule and watch this video. The Diamond is in the Details! 😎 Not overkill, well thought out and some preventative measures taken.🧐 I’m not sure how old this ambulance is, but that frame appears to be quite rusty for the age. I’m sure it has seen LOTS of road salt, etc though. I used the grease method as well. Learned that from someone many years ago. Some people say it’s crazy but it works and works well! 🤩 You do good stuff and I’m usually impressed and not shocked by your work. I think that the build is more than sufficient for anything he might pull. 🤩 Those wheels, and I’m not sure how bad they were before, sure make it STAND OUT and look sharp! It may not be a “Show Piece” but it is a reflection of you and your work! Now that’s putting a bit of yourself into the job! 🥰 Good stuff! I always learn, and sometimes relearn, something from you! THANKS! 😎 Stay safe!

[@SumterWrecker]

Mr JC I enjoyed the video. Thanks for sharing and stay safe.

[@AnthonyYoungblood]

absolutely awesome!!!! I have a new hobby watching this!!!! Love this stuff!!! to heck with my world,,, you hiring??? lol Id buy those welds btw,,, better than I could do

[@j.c.smithprojects]

i may not be the best at what i do but i will always give what i do my best. i am continually impressed by with your work and your unwillingness to sway from your standard. dont you find it frustrating when people want you to do work to their truck because of the time, effort and the attention to details we show in videos but then question the cost and if it is "really" necessary? (justin was not like this. everything i suggested, he said "if you think it needs it, then go ahead.")

[@davidrubin1895]

Nice fabrication & welding. Better than a coach builder would have done. Full penetration continuous welds. I did heavy fabrication & welding for 3 years. Your craftsmanship Is impeccable. Thanks for showing. Have a good day

[@throttlebottle5906]

ahh, after seeing the license plate under the ambo. I looked at "about" and seen Atwater, Ohio. I'm a neighbor from the west not far from the I-77 and SR-224 blender. I though the amount and look of the rust looked familiar (lol)

[@dave.shakawe]

“I’m not a dentist, but I do pull teeth”, said the surgeon at the hospital in Burundi, Africa. Out came my painful wisdom teeth. That’s like my welding

[@throttlebottle5906]

at 11:30 quickly hide it under 4 or 5 more passes :)) joking of course, but I have seen factory made hitch welding worse by far. the things I've seen in the past, make me wonder how anything stays metal glued together.

[@greghowse3767]

Hey JC for someone who not a welder you do a bloody good job stop punishing I love the way you are explaining I am glad that you came back to the Ambo you so Meticulous in what you do keep up the good work Cheers from Down Under ( Australia ) PS I do enjoy your work as I am retired and love hands and creative work

[@rayjon237]

Rust-Oleum farm and fleet semi gloss black is 4.30 a can by the case at home Depot online,. It's a acrilic enamel with a rust inhibitor.. I like it on frames..

[@joemascioni3101]

Holy Moly J.C. that Ambu-Camper will now be able to double as a tank retriever with that hitch/bumper combo! I have seen class V hitches that have less attachment to the frame rails. Well done sir!

[@bevan3648]

You are too hard on yourself, Sir, the quality of your work is second to none, it’s. Delight to see the end Product. Greetings to Both You and Mrs JC From Cheshire.

[@RuggedArtistry]

I thoroughly enjoyed this video and you are a hell of a good weld and fab guy. Looking forward to the 4500 dump truck. I recently made a couple of comments warning Waldo about the potential of distortion if he galvanizes his bed. I wasn't critical, just informative and he deleted both of my comments. I saw your comments on his page and I assume that you might have some doubts as well? I told him that Kilar, which may be close to you, no longer galvanize their beds because of distortion, but he didn't want to hear it. It will be interesting to see how it plays out. It would be a shame if that beautiful bed he made gets damaged because of the extreme heat.

[@michaelford4703]

Love your work keep safe to you and your family 😎👌👍👌Michael U.K.

[@r.n.6515]

That is one awesome, and expensive, trailer hitch. Nice job! 👍👍👍

[@jodywills7469]

Do you have any fl-70 freightliners are s lines for sale I am looking for a low profile truck that I can run something like 195 zone or low profile 22 5 on I am trying to make me a hot shot outfit and I would like to have it with a sleeper or long enough to put a sleeper on it and then have a pretty good size flatbed or make it long enough to be just one outfit Tahoe a camper on and then how something back but it don't necessarily have to be like that I am just wanting a low profile truck that I can start a hot shot business with thank you if you could message me back I would greatly appreciate it

[@wazzazone]

You're a good man Mr Smith well done congratulations I think it's a great job.

[@ydocproductions5593]

Well done J.C. Those welds look fantastic. Another project to check off the list👍

[@danblan9036]

I converted a class 5 ambulance into an RV, for toy hauling. Love it

[@hubertrobinson8825]

That's perfectly done you said you're not a welder but to me you done a better job than some who calls themselves welders great job

[@paulchristopoulos685]

I have to say, for a guy that isn't a welder you are a heck of a welder! Your fabrication skills are real world also!

[@zweg1321]

Great job Too bad the ambience wasn’t made this good It’s sad things are made just good enough I would hate to see a brand new ambulance Your second weld looks good

[@carlaustin7398]

You might not be a welder, but you sure can weld. Hitch looks great.

[@waynedunne1678]

Looks good JC. Now make another video! Hello Mrs JC.

[@cesmith4566]

Your way to critical of yourself! Well done!

[@richardhoneywell7411]

Very nice project J.C. should make a nice race truck totter.

[@haroldphipps3457]

Very much enjoyed the series! Justin likes helping, so that is a huge plus! Good job on the hitch/bumper build. Huge improvement!

[@andreaswagner468]

Whatever may fail on that truck it won't be the hitch, this thing will last longer than all the rest of the truck

[@jimcrichton8028]

So much satisfaction watching a job done well.

[@lawrenceashworth7668]

You say your not a welder but you weld better than most professional welder do!

[@hollandduck79]

from the Netherlands thanks for the video J.C.

[@slider4511]

Always enjoy watching you

[@russelltrupia4479]

Wow that back end looks awesome great job JC

[@jamesboris1233]

I think you’re a better welder than you think!

[@philsales342]

Nice job. Quality product.

[@eddiepatterson5025]

Between the sandblasted, primered , painted wheels with new tires and the fabrication of the new primered and painted hitch. You completely transformed the look of the ambulance. Nicely Done ✅ Sir. You do awesome work JC. May you and your wife have a Blessed One Sir.

[@j.c.smithprojects]

it came out ok. after it was all done, i see things i would have done differently. hind sight is 20/20.

[@johndunning1590]

For someone who is not a welder you did one hell of a job I think

[@dane9175]

Grinder and paint makes me the welder I ain't😎

[@davidwolff8878]

awesome design on the hitch. ?? for you. i have a 2014 GMC with 96,... miles, would like to change tran. fluid , filter , But since i do not know if fluids were regularly serviced. i was told i could be opening a fresh can of worms any thoughts?

[@j.c.smithprojects]

unless it was an abused truck, i would change the fluid and filters. the 96k wouldnt bother me.

[@Steve-gd3yk]

I got a sneak peak on that hitch and I have to say it turned out great.

[@morgansword]

JC, I appreciate the time taken to do things to the very best your able to do. People see nice work and ask "Who did the work" and so your being hard on yourself as to the fine quality welds that are not only decent looking but will stand the pressure of time. People see bad work and will also ask who did it and then the bad remarks will travel around the world. Backwards I know. I passed the tests for welding for Todd Ship Yards IN Ketchikan Alaska. I don't think any of the welds I slash others as well did as good as your not being a welder. Fine job and your should be proud. I absolutely would be were it mine. Thank you again.. I watch a lot but hospitals leave me so tired that I just don't do many comments (books) anymore... please forgive me

[@j.c.smithprojects]

i wish you well. sorry to hear the troubles.

[@chrishigdon1070]

no hand prints to go with the shoe prints funny right there

[@jerrellkull5347]

Nice job as always J.C. What's up with the Dynahoe? Take care.

[@j.c.smithprojects]

dynahoe will back in the shop this fall.

[@haroldphipps3457]

@@j.c.smithprojects hooray!!!

[@williamcraig1505]

Great job JC that hitch will pull anything

[@johnzwicker204]

U did a good job on that for him keep the good work up

[@jonsm114]

Details……love it! Nice work!

[@stephengordon576]

That hitch isn’t going anywhere!

[@ewanmcalpine2393]

Where did you get the c clamp extension tool ? . Hello from Dalyston Australia

[@j.c.smithprojects]

i picked them up at tractor supply.

[@resteejackson9235]

Where are you located? Would love to have you do some work on my 26ft box truck?

[@j.c.smithprojects]

northeast ohio.

[@jayh8490]

do you have to balance those wheel like you would a pick up or car? or is it beads inside the tire? i don't work on trucks this big lol, so if that's a stupid question i apologize

[@j.c.smithprojects]

tires 19.5" and larger, i use balancing beads

[@ATF1985]

Love the video . Keep up the great work

[@daviddamico4288]

Looks real nice

[@darrylthroop5100]

nice to see someone with pride in there work

[@braaapattack2937]

And just in time for “lunch” at work

[@theheavywrench9549]

Great job.

[@SuperScooby70]

That square tube wasn't cheap.....just last week I bought a 48" chunk of 3x3x1/4 wall tube off the drop rack at my local supplier. $40! If it was new it would have been $17/foot instead of $10.

[@j.c.smithprojects]

$160. for the box tube.

[@SuperScooby70]

@@j.c.smithprojects Holy crap...its ridiculous any more

[@eddiepatterson5025]

Nicely done Job well done 👍

[@paul3506]

Another great job bud

[@thepubliceye]

Look out for the bear.

[@robinweiger6504]

Is that well look good

[@teebugg66]

That turned out really good! He needs a step back there that goes in the receiver that he can mount a generator on one side and a cooler on the other with a step in the middle.

[@fredclarijs7370]

nice job you are a pro

[@vinceschannel8927]

Just look at it!

[@stuartgibson1896]

Great stuff JC!

[@NICK-uy3nl]

That old frame should really get sandblasted and painted before welding the new frame piece. Maybe it's time you invested in a small outdoors sandblaster!

[@j.c.smithprojects]

i hot it with the needle scaler and flap disc. nothing is welded to it. the new hitch is bolted to the original frame. the hitch is welded to the frame liners.

[@NICK-uy3nl]

@@j.c.smithprojects - I get it, but that old frame will continue to rust away without protection, after all the hard work you did to rest of the frame.

[@michaelhartloff3833]

Wassup jc

[@Fab2Mc]

😀

[@bitlittle457]

It does look good

[@Joe.Dillion]

Nice work

[@hdchevy8228]

Good job JC.