My fans went working and all of a sudden after "troubleshooting", they came on. Respect man.
@hrevyaga823 жыл бұрын
Very simple operation explained with out confusion and double talk. Thank you
@frankfranz44283 жыл бұрын
My left fan wasnt coming on. Moved the wires around and it came on. Ty. Video got me thinking when you said bang on the back of fan
@josephgaumer70822 жыл бұрын
This helped so much on my 2005 Impala, thank you so much.
@lanceCoyle3 жыл бұрын
My driver’s side fan won’t come on and is resistant to turn manually. So, thanks for this video. I was gonna wire directly to the battery to see if it kicks in to be sure. Was gonna get a whole kit including thermostat, wiring and relays, but now I’ll probably just try the fan motor
@Dr.BiscuitsYC Жыл бұрын
This was a big help, thank you!
@jt8280 Жыл бұрын
My 03 Impala coolant fan should come on at 200 degrees Fahrenheit but it does not. I can activate them with the A/C on only. Engine coolant temp sensor faulty? Fuses ok. Thanks
@martyhart135 Жыл бұрын
GREAT VIDEOS THANK U
@DogBad023 жыл бұрын
I have a 03 Impala. Just put in a New Radiator and Fan Unit. The Old Fans weren't working I found out. I watched your Video and I got the Drivers fan to work ( I was Squealing at first) and then calmed down and worked. The number 1 Fan at the time I could not get to work. I did all the things in your video to No avail .. I checked Both fuses ( 25 amp they were good) I switched the Grey Relays around and still only the # 2 Drivers side works. The passenger side fan on the NEW fan assembly Still won't work I ordered a Black relay # 2 to see if that might be the problem, but that won't be here until later today. Is there any way to test the black relay?? Is there a wat to Jump across the pole ?? as you showed with the Grey relays??
@korinnamccartney42402 ай бұрын
So do both fans come on with ac? I am getting mo fans when ac turmed on compresser clutch engages but no fans and no cooling
@BSaintMusic Жыл бұрын
Should the middle relay (fan count #2) (5 pin relay) have 2 pins receiving 12v like the other 2 relays (fan count #1 & #3) (4 pin relays)? When I test for voltage on the relay circuit box, i get 12v on both pin slots 85 and 30. But on Fan #2 I only get 12v on pin slot 85. Why not pin slot 30 as well? Is that normal?
@CLOWEN20103 жыл бұрын
My 2003 Chevy Impala had great ac, then went out all of a sudden, i got it from my grandmother, it’s been garage kept and only has 30,000 miles... the clutch plate spins so i don’t think it’s bad, the fans spin while ac is on as well, the heat works, but ac is warm on both drivers and passenger side, so i believe the blend doors aren’t the issue... does it sound like maybe i need freon and that i may have a leak?
@taysavage98562 жыл бұрын
If u haven’t already you need to get your ac recharged that’s all and it’s cheap as well! I had the same problem in the summer time (imagine) 😓
@big420ccboiz93 жыл бұрын
Got a question both of my fans come on with the ac but went my engine get hot the main fan stop working then when it cools the main fan turn back on!!! Do you think that's the relay
@elijahtaylor98143 жыл бұрын
Hey I have a question I have a 2000 impala that keeps overheating an I’m tryna troubleshoot it the fuse keep blowing that connected to the first relay any advice?
@cameranmorse3169 Жыл бұрын
Hey Elijah, did you ever figure out what went wrong in this issue? I'm having the exact same problem
@ljdidit29163 жыл бұрын
Damn Bro... Thanks!
@zebadiahcoleman70262 жыл бұрын
Thanks
@Jaylikescar3 жыл бұрын
Mine only comes on with the ac on. With out it it doesn’t turn on. I replaced the relays and it still has the same problem
@heathestes34503 жыл бұрын
Sounds like your temperature sensor is bad. Under $20 but kind of a pain to replace. Small hands will come in handy lol.
@gardud7 Жыл бұрын
@@heathestes3450 if the temp sensor is bad would it still show correct readings on the dash?
@dnbaloftgrid Жыл бұрын
@@gardud7 I'm curious about that too
@JoseHernandez-ni1ol Жыл бұрын
Did this fix your fans are they now running without having to turn on a/c?
@Jaylikescar Жыл бұрын
@@JoseHernandez-ni1ol yeah the code went away had to change the connector too and bleed the coolant good. I bought a giant funnel that can hold like a gallon filled it up half way with coolant and let it bubble out for like 30 minutes idling.