-Switched back to race bullets because "racecar" -Street driving with the 4r70w manual valve body (4000 stall) and manual steering.
Пікірлер: 19
@coryman4245 Жыл бұрын
Bad ass
@robertquinn2410 Жыл бұрын
What bullet mufflers are you running? Looking to do something similar but there’s so many brands. Love the car/content! 💪
@brian03cobra Жыл бұрын
I went with vibrants from racemufflers.com choose the size/length you want and done :)
@kidwithawrench294310 ай бұрын
You have given me a lot of insight on a manual valve body 4r70. Which kit did you go with? If u font mind me asking
@brian03cobra10 ай бұрын
It's from lentech and it's the strip terminator rated for 1500/1000. Thank you 👊
@cobranatesvt Жыл бұрын
How are you liking the MVB? And did you do a manual lockup?
@brian03cobra Жыл бұрын
I really like the mvb because it is so simple. Mine doesn't have a lockup which is fine.
@the__black__box Жыл бұрын
whats up man, i see you on Alex Flores livestreams all the time. I have an 03 cobra and looking to do a 4r70w manual valvebody next time the transmission needs to be dropped. What’s all needed and what’s involved? Will the car need a retune? i hope not since its manually shifted
@brian03cobra Жыл бұрын
Hey what's up! Alex's shows are great. All the basic stuff is needed for the swap and some of it depends on specifics (type of shifter preference, driveshaft type, etc). My setup is unique as i have a 25.5 cage with extra bars added underneath and a 9". No retune needed. Choose a stall based on what you want to do with the car. Overall, i really like the swap.
@the__black__box Жыл бұрын
@@brian03cobra mine is a bone stock IRS car, any idea about the driveshaft situation? will stock one work?
@brian03cobra Жыл бұрын
@kang5029 Before i went with the 9", i ran the 4r70w with a built IRS and the stock driveshaft needed to be shortened. I highly recommend you do all the FTBR delrin bushings and their differential cover.
@fordtechlife Жыл бұрын
🐎🦊🚗💪🇺🇸👊
@wesleygolden3985 Жыл бұрын
Who’s 4r70 did you go with ?
@brian03cobra Жыл бұрын
Lentech 👍
@wesleygolden3985 Жыл бұрын
Thanks for the reply
@Punchdaclown8 ай бұрын
What shifter do u have?
@brian03cobra8 ай бұрын
B&M magnum pro stick
@StillNoPickles699 ай бұрын
Who makes the plate that covers the hole for your shifter?
@brian03cobra9 ай бұрын
a gentleman on IG made them awhile back. @gholland_cobra // www.liquidillusioncoatings.com im not sure if he still makes them. reach out and check