2003 Suzuki Intruder Front Wheel and Brake Caliper Removal

Removing my front wheel and brake caliper from a 2003 Suzuki Intruder 1400. Part of preparing to rebuild it.
I actually rebuilt it right away but the camera goofed and corrupted another 25 minutes or so of footage. So an hour total from removal to complete rebuild. Install + bleed not included.
I believe the procedure is basically the same from 1987 through 2006 (Called a Boulevard S83 after '05 I believe).
Might also apply to the Intruder 800/S50. Concepts should be the same anyway. If it's not, let me know in the comments and I'll pull this part of the description.
Real-time was about 35 minutes, including digging up tools, checking the manual for procedure, etc. Just a homegamer, so I take my time and think things through.
Repeat: I AM NOT A PRO, just handy with a wrench and have access to the service manual.

[@andrewwoollon4967]

What size is the big hex key to take the wheel off

[@azazelakira12]

12mm

[@HooliGangstarz]

What size is the axle bolt ?

[@squish3r]

12mm Allen

[@johnkent885]

What size star or hex tool do you need to remove front axle. Cheers John

[@squish3r]

12mm hex