Thank you Man. You saved me a lot of stress. Go You Tube!!!
@Miltomeal17 жыл бұрын
Mr. Beast, this is quite a fantastic job that you did to perfectly compliment a gorgeous automobile.
@cruxinterfaces3 жыл бұрын
You're a professional installer, if you want to see other great 12 volt videos Thank you for the content
@moriston1994 Жыл бұрын
Instead of taking the glove box out you can just push in the sides with it open and pull down and it goes all the way to the floor makes it so much easier
@cadenlipp36914 жыл бұрын
I have a 2007 Pontiac g6. I’m going to put in an aftermarket head unit without back up cameras. What kind of wiring harness would I need and what all would I retain after changing out the stock unit?
@goldencisco3 жыл бұрын
im trying to install a pioneer avh120bt into a pontiac g6 but it wont power on, do i need any special harness? i only have a scosche gm10b the shop said it would be all i need, but it still doesnt work. any help will be appreciated!
@minionmonsters68162 жыл бұрын
I have a 2007 pontiac torrent with pioneer speakers.and I'm trying to hook up a Toyota entune radio,. Please help me
@jameybarisoff2 ай бұрын
Does the stereo still sound good with the Monsoon system even though its not factory?
@dustinh46353 жыл бұрын
What would need to be done to still be able to use the info display on cluster after installing radio?
@kobevanderkamp17292 жыл бұрын
ik this question is from a while ago but i don’t think it’s possible tbh, but i haven’t looked into it
@jonathanoverfelt63284 жыл бұрын
Amazing video. I’m looking to upgrade the cluster in my g6 and do the same type of radio as you. This will be very helpful.
@lgremix47314 жыл бұрын
I have double din kenwood that won't fit my mount face. It's for a screen I'm guessing so what's next..
@ayejeh4 жыл бұрын
I have an 05’ G6 and I’ve read that I shouldn’t replace the radio because I have the monsoon amp. How can i install a double din stereo? I’ve seen so many mixed feelings about it
@dandrechavous62374 жыл бұрын
So I have G6 07 and trying plug the reverse camera into the 12v power source the radio black out?
@patrickkelley14883 жыл бұрын
I have a 2005 g6 why doesn't the sound work I am installing a jvc bluetooth screen and I cant get the audio to work
@ProvoBeastAudio3 жыл бұрын
You may have the factory amplified system and the factory Monsoon amp isn't turning on with the new radio. I'd suggest hooking up the blue / white wire to trigger that amp to turn on.
@slamanna2124 жыл бұрын
Under the parts list, it Says Scosche GM25 discontinued. And below that it lits a GMOS-LAN03/04. Should I be using the GMOS thing instead of the scosche box? I am also using a Metra 95-3303B instead of the dash kit you list because It has the driver info display i can mount in the glove box.
@klou70624 жыл бұрын
Hi, I have a question, if i am installing a new after market head unit (unsure what the brand name is) and nothing is coming on. I was told I need to get some code to rest the stereo from the dealership. Do you know how to just do it on yours own or lead me the way to the answer. Thank you.
@RedNeckNation_53 жыл бұрын
I’m trying to install a Dual XDVD251BT from Walmart but I can’t find the proper wire harness for the 2006 g6?? Any sites y’all know of or any place I can get this.
@caustichonu2 ай бұрын
I really want to find an aftermarket radio that has the OBD2 interface so I can continue to use the same features I have with my OEM deck.
@wesleybanks51943 жыл бұрын
I seen this video and I have a 07 Pontiac g6 base model and I don't think that my don did anything installing the Pioneer Avn21ex no antenna booster or what you were describing in the following video to talk to the car please help I want to install a new system all new speakers and head system
@chrisboone23311 ай бұрын
Can anyone answer me a question I'm currently putting a aftermarket touch screen radio to my 08 pontiac g6 the radio comes on but no sound comes out even when I Bluetooth my phone it's the same thing any suggestions would be great
@ProvoBeastAudio11 ай бұрын
Sounds like you have monsoon Audio. You need to trigger the factory amp to turn on with the new radio. Is usually the harness adapter had a blue white wire that needs to be hooked up to the radio.
@chiquithing13 жыл бұрын
Hi I need to install the blue box adapter on a g6. I seen the one you used was disconnected so which one would you recommend I order to replace it?
@trey9853 жыл бұрын
I have a 2002 pontiac grand prix se and was wondering if i’d be able to install a touchscreen stereo because it doesn’t specify the model of car it’s for
@mannyrdi6 жыл бұрын
How did you pull the cigarette lighter? Did you have to pull the panel it’s on?
@greendragon01204 жыл бұрын
I have a Pontiac G6 2007. For the Scoshe GM 25 since they are discontinued what should I get for that?
@johnathanhumphrey30015 жыл бұрын
If I hook up an aftermarket radio alone with just a regular harness kit for the radio. Will my steering controls and remote turn on still work. I don't really care about the old change stuff and the rest of the data the radio gives me on my factory. I just want to install an aftermarket but I want all functionality except for the data the radio provides me.
@danny117hd6 жыл бұрын
Just bought a truck with one of these already installed. I'm upgrading bios today and then putting in a back up camera in the bumper because then I get to drill a hole in steel (ha ha ha Tim Allen manly laugh).
@ashleyw20986 жыл бұрын
I just got a 2009 Pontiac g6, I would love to switch out the factory radio and replace it with a pioneer. However, I don’t know what parts or where I could even have help I’m doing so!! Any advice or direction would be appreciated!
@mellie10222 жыл бұрын
Did you ever post the video on the adapter to get the steering wheel controls to work? I have my 09 pontiac and I am looking on Amazon for a radio screen system with cameras but I want to be able to use my wheel controls. Also do you know of any other radio brands that will work with this car? What about the xm radio? Will that still work?
@jeremyward97775 жыл бұрын
I am installing just a backup camera on my Pontiac g6 2006. Do you still need a bypass for it to be sble to work?
@JusGotWicked235 жыл бұрын
I’m just curious if you install a new receiver or double din will you lose the keyless entry and remote start. I install a double din in an 08 equinox and I lost the keyless entry.
@iflex19637 жыл бұрын
Metra has a kit with a dedicated display for the Drivers Info Center. Just not quite sure where would be the best place to mount it that would look good. Anybody familiar with it or have pics of it mounted.
@lambchopsl28702 жыл бұрын
How can I twist that last screw of the glove box to make the whole thing come out? I really need advise to get that bugger out
@axelmontano6 жыл бұрын
I'm doing an install on a 2006 Pontiac G6 GT and I have everything in the car so far and i tapped my fuse box for the A.C.C. power and my stereo boots up, and it works, however I get no sound from my speakers, i'm using just a harness alone in this situation. All wires were connected and tested with a multi-meter and all connections are solid, what could the issue possibly be, only two wires off the harness I left off and just capped them. Those being the solid orange and orange/white wire which are both the dimmer switch wires. My harness adapter only uses the blue connector in the car and the other black harness in the car i left un-used. Do you know what could possibly be the remaining issue in this system?
@ProvoBeastAudio6 жыл бұрын
Sounds like your factory amp is not turning on. In the past, the pink OEM wire in the harness is your amplifier turn on wire which needs to connect to the blue/ white wire of the radio.
@axelmontano6 жыл бұрын
So as long as I run the Blue/White wire from my radio sides harness directly into the pink wire in the car harness, the radio will send enough power to trigger the amplifier and it will allow me to receive through my speakers?
@ProvoBeastAudio6 жыл бұрын
It should, yes. It's a trigger wire, so it doesn't really need any more than 1 amp or so.
@axelmontano6 жыл бұрын
Provo Beast Audio Installation it did turn on the amp thankfully however for some reason i am only getting one speaker to play with this setup and I'm not sure why, I'm using just a wire harness and ignition wire I have no interface could that be an issue and I just need a different harness?
@ProvoBeastAudio6 жыл бұрын
It could be, not sure without seeing it in person. Sounds like a wiring issue but not sure. You might need to take it to a shop to be diagnosed.
@Tino.__.4 жыл бұрын
Can you still look at the menu from factory stero, gas range engine codes ect.
@KevinBigg4 жыл бұрын
No
@EastEZ828 жыл бұрын
Great video love the sped up parts
@justanotherchannel98153 жыл бұрын
Will this be similar to a 2010 as well? I swear I can’t find a YT for the 2010 model and idk why 😩
@ikeabrahammustang71133 жыл бұрын
I'm looking myself with no luck
@meisterscheister84618 жыл бұрын
I'm trying to install this same unit into a 2003 Mitsubishi Eclipse Spyder (Infinity factory radio). The factor plugs are separated into two different ones. I have the main one set, but what do I do with the other one? As it stands I really only hook up to about 4-5 wires on the primary plug. Pretty lost on this since all videos I find on my car never show them installing double dins. Any pointers?
@ProvoBeastAudio8 жыл бұрын
Since you have the factory Infinity sound system, the other harness you are talking about are your pre-out signal wiring to your factory amp. You will need this harness: Metra 70-7003 www.amazon.com/Metra-70-7003-1994-2004-Mitsubishi-Integration/dp/B00377KW7E/ref=sr_1_1?ie=UTF8&qid=1471490950&sr=8-1&keywords=Metra+70-7003 That other plug you are talking about, this Metra harness connects into it and the other end rca plugs into your double pre outs on the Pioneer radio. The primary plug supports powering the unit.
@charleslane27355 жыл бұрын
Okay so let me get this straight,are you saying you that the blue wire for the reverse light is need for the negative power wire for the camera to power on?
@Rapidmp35 жыл бұрын
What's a cheap wire harness that can fit a 2004 grand prix with monsoon sound system?
@bgh00637 жыл бұрын
Question - the data signals you describe when the stereo is successfully removed: are you referring to the signals on the dashboard? (i.e. Low tire pressure, low fuel, etc)? if so, when the new Pioneer stereo is plugged in and functioning, does it also display on the screen? the factory stereo does with the Pontiac does obviously with my 2008 G6, this was one of my questions prior to attempting this install.
@ProvoBeastAudio7 жыл бұрын
No, GM uses a data signal, or a canbus system to relay information across multiple components in the vehicle. Essentially instead of an all analog system, they use a data signal within the car. It isn't an easy swap since this install requires the adapter to convert the signal from the car and make it readable for the new radio. This does not retain the low tire pressure, fuel notifications on the new radio, usually the idatalink maestro can retain that as long as your new radio is compatible.
@nicholaskehren61536 жыл бұрын
i think the gm lan 112 is for amplified and non amplified. If you could elaborate that would be helpful. If so Thank you in advance
@chrisrugg167 жыл бұрын
I have a 2010 Pontiac G6 GT everything is stock. what do I have to do to get my aftermarket radio hooked up. I bought a GMOS-LAN-03 and I don't completely understand how to hook it up. I have a Kenwood DDX310BT to put in
@ProvoBeastAudio7 жыл бұрын
See the description for other parts needed. Match your radio wire colors up with the on on the GMOS harness. Use the video for installation.
@ryanslamka9428 Жыл бұрын
do you need to harness at 9:47 for the carplay to function in this car?
@ryanslamka9428 Жыл бұрын
the**
@abbygrimes75413 жыл бұрын
what about apple go play stereo??? that go with the g6?
@jabariiwilliams5279 Жыл бұрын
I have the GTP G6 , I have 2 green cables coming from my reverse light
@jaidysreck95023 жыл бұрын
Where can I get that one box thing at because I tried installing two radios in my 08G6 and it goes into protection mode and the entire car shut down or starts flashing literally everything
@ProvoBeastAudio3 жыл бұрын
Parts are listed in description. Head over to cruxinterfacing.com to see what parts are needed for your install.
@tylerking78577 жыл бұрын
I am working on a customers car and the original harness has been cut I have the head unit powering up but cant get any sound need some advice please
@ProvoBeastAudio7 жыл бұрын
Sounds like you may have the factory amplified system and the amp isn't turning on. Depending on the year, that factory remote turn on wire may be different, but you will need to locate that wire and connect your new radio's remote turn on wire to it.
@ikeabrahammustang71133 жыл бұрын
Since I'm not good at working on cars how much would this cost at a shop
@tbpkylesullivan6 жыл бұрын
When you do the wiring. I tapped my Igntion wire and hooked that up to the harness (yellow). Hooked up my red wire. And hooked up every other wire correctly. But there are 3 wires left. 2 green wires and a pink wire. Where do Those go? My stereo won't even come on.
@ProvoBeastAudio6 жыл бұрын
The yellow wire is a constant wire, which be connected to a power source hot all the time. The red wire is is your ignition wire, on only when the key is turned on in the ignition, and be sure to ground the black. Any one of those three incorrectly wired and your radio will not turn on. Start there.
@kevonone79156 жыл бұрын
which fuse do I hookup power cord to?
@ProvoBeastAudio6 жыл бұрын
The red wire will need to hook into any source in the fuse box that is on ignition switched power (only on when the key is on). Use a multi meter to determine the best one. I would also use an "add-a-circuit" adapter to safely tap into the fuse box.
@brave2797 жыл бұрын
I've installed an aftermarket radio before on a Mitsubishi. However I want to replace the stock radio in my 2005 pontiac g6 base. Can you let me know what id need for pretty much the exact same setup you did in this video minus the steering wheel controls since my car doesnt have them.
@ProvoBeastAudio7 жыл бұрын
The description has a list of parts we used. Go to Sonic Electronix and use their vehicle fit guide to help source other parts needed for your install. use coupon code ProvoBeast for 5% your entire order.
@nickvivant8 жыл бұрын
will the driver info (mpg, miles to empty etc) show on the aftermarket radio?
@ProvoBeastAudio8 жыл бұрын
+Nicholas Rose This model does not have functionality, but some kits and some radios do. This model doesn't display those features.
@thehorrorlab90526 жыл бұрын
I am trying to install a JVC I have all the parts but it it says the switched power comes from the relay where is that at?
@ProvoBeastAudio6 жыл бұрын
Well you can grab switched power from the fuse box too however if you have the smart harness, it provides switched power behind the radio with the adapter.
@sbrodie087 жыл бұрын
does this pioneer unit come with the grid lines or are they coming from the camera. Please reply. Thanks
@ProvoBeastAudio7 жыл бұрын
They both have them. Since the camera has them, i have turned them off on the radio.
@stevenstewart85188 жыл бұрын
Nice Video Man.
@ctdgunner7 жыл бұрын
what is the ignition wire?, why do i need that adapter, i get the factory chimes... there anying.. i dont want them
@ProvoBeastAudio7 жыл бұрын
ignition wire is the wire that trigger the radio to turn on when you start the car. The harness adapter not only retains the chimes, but also retains warning sounds, turn signal sounds, etc that are needed for other components in the car.
@CrushhMM67 жыл бұрын
where did you hook up the long green wire to? And for the micro bypass where did you connect the dark green wire to?
@ProvoBeastAudio7 жыл бұрын
Long green wire was just spare wire i had left over. I used that long green wire to extend the reverse wire (Purple / White) wire on the pioneer all the way back to the rear of the car and tapped it into the + on the reverse light. On the bypass, the dark green wire connects into the parking brake wire, a bright green wire on the radio.
@sucio-3 жыл бұрын
Hate when GM decides one year you can just pull the panel off your Head unit and change it then the other they decide you have to disassemble your dash trans mission and engine to access it
@dumbledoresarmy75695 жыл бұрын
I got the axxess 2103 nav interface. Best buy told me this would work as well as a few other sources. The instruction manual it came with also said it would work. But on another website it says it won't work. Not sure what to do because I would hate to install it all just to have to order another interface and plug the old stereo back in lol.
@sincerewon356 жыл бұрын
THANK YOU for the help. Is it the same with a 2007 Pontiac torrent that I will need a separate receiver Box instead of just plugging the 2 wires to a Kenwood radio model DPX30 to you
@ProvoBeastAudio6 жыл бұрын
Yes, you will need a few install parts and the install technique will be similar but different. Head over to sonic electronix and use their vehicle fit guide to know what parts exactly you will need. Use coupon code ProvoBeast to save some cash on checkout.
@Robert-sb2gc7 жыл бұрын
One more question. Almost done with the install and using a boyo back up camera. Do I need to use the reverse indicator wire since this head unit has a dedicated backup camera input? It looks like I may be able to just splice the red power in to the harness, ground and then connect the camera via the cable? Thanks for the help. Could not have done it without your video.
@ProvoBeastAudio7 жыл бұрын
If your video cable has also a red wire with it, just tie that red wire from the backup camera video cable into the radio's reverse wire. The other end of the video cable, attach the red wire to the reverse light along with the power and ground for the camera itself. So the radio will be triggered to show the camera when the reverse light is on as well as the camera receiving power. hopefully that helps!
@Robert-sb2gc7 жыл бұрын
Provo Beast Audio Installation On pioneer head unit the long green wire actually says parking brake. The reverse trigger wire is just a short purple wire that I wired into the harness. Should I use the long green parking brake wire to tap into the taillight or should I extend the purple rear trigger wire the twilight.
@ProvoBeastAudio7 жыл бұрын
Well, if your harness adapter provides the reverse wire trigger, then the red wire on your back up camera view cable will not be needed. Just tape it off. Do not connect the parking brake to the reverse lights.
@lindohkid74637 жыл бұрын
Hey I have a question how much would it cost to simply put in the pioneer system into a Pontiac g6 coupe
@ProvoBeastAudio7 жыл бұрын
Prices range depending on brand, parts, and what features you would want to retain. Head over to Sonic Electronix and use their vehicle fit guide to find what radio would work best. Use coupon code ProvoBeast to get 5% off at checkout. Save some cash.
@jaydenkoehler93987 жыл бұрын
Hi i have a 2006 Grand Prix GT and i was told that there is a $100 mount/adapter that i need to buy in order to install a double din radio since GM made something different with these cars. I talked to a guy at best buy and thats what he said. Just wondering if that part is the part scosche in your video.
@ProvoBeastAudio7 жыл бұрын
Before you buy anything, and best buy also sometimes can be way off, go to crutchfield.com and see what adapters you will need for your car. Then, make a list and search those parts on amazon. Best price for the right parts, avoiding markups from Best buy.
@tonyaguinaga33408 жыл бұрын
is there a way to get the camera to show whenever you'd like and not just while backing up?
@ProvoBeastAudio8 жыл бұрын
Depending on the radio, yes. You would need to hook the camera into power that is on by the key, typically an ignition source, not just when the car is in reverse (because it currently would pull it from the reverse light). Depending on the radio, you then would be able to manually select the camera and see the image.
@johndoe44038 жыл бұрын
do you still get all your service info like oil change signal, door lock settings, headlight settings thru aftermarket radio like the factory has
@ProvoBeastAudio8 жыл бұрын
+john doe NO, this radio does not support those features.
@martynturner84248 жыл бұрын
Hi so u wire the camera red power cable & the green reverse signal cable ( which you extended) to the power cable on your reverse tail light ?
@martynturner84248 жыл бұрын
???
@ProvoBeastAudio8 жыл бұрын
That is correct
@dtzfinest7 жыл бұрын
did you plug the video cable into the in or out put in the back of the unit?
@ProvoBeastAudio7 жыл бұрын
Reverse Cam input.
@kentharris4897 жыл бұрын
if you don't have a microbypass where would the parking brake wire be located on a G6
@ProvoBeastAudio7 жыл бұрын
Typically there is a ground lead off of the parking brake itself. I would suggest looking there.
@AvatarMaster9x7 жыл бұрын
I have a quick question: if I do not want steering wheel controls, and I don't have OnStar or the Monsoon sound system, would I still need one of the wiring adapters? And If I do, what should I use since on a G6 2005?
@ProvoBeastAudio7 жыл бұрын
To choose between different wiring harness options, head over to Crutchfield.com and input your car. They will tell you what harnesses to purchase depending on the options you want to keep.
@AvatarMaster9x7 жыл бұрын
But so if I do not want any of those things do I still need one?
@ProvoBeastAudio7 жыл бұрын
Yes, you will still need a wiring harness adapter or else you will have to tap into switched power at the fuse box for the ignition source since it isn't located at the harness. The benefit of the adapters is that it keeps the red factory turn on wire.
@AvatarMaster9x7 жыл бұрын
sorry one last question, I don't really know much about this, but is the accessory (12 volt 10 amp) lines the same as the ignition wires or are they different things?
@ProvoBeastAudio7 жыл бұрын
The red wire is the ignition wire. Accessory sometimes is referred the ignition wire, but essentially it is the wire that is one when the key is on.
@jamesjohnstone60215 жыл бұрын
How do you bypass the anti theft system? I got a gm harness and wired it to the radio harness ne everything g works but car wont turn over and the anti theft light is on
@BlackRose-fy9wd3 жыл бұрын
I am running into the same problem but I got my car to start by turning off the radio but the radio has to be off to drive, how should we fix this
@christianschmidt80454 жыл бұрын
So I just bought an 06 g6 and I'd like to keep my message board and traction controll switch after I put in my aftermarket. Do you keep all that when you switch?
@jakematthew25214 жыл бұрын
Is it the same process as a 2005 g6
@XfallenangelX218 жыл бұрын
Question, did this G6 originally have the Monsoon radio system or the standard radio? I'm about to do this on my new 09 and doing the initial research.
@ProvoBeastAudio8 жыл бұрын
+Calleigh F It did have the Monsoon system, but before I installed this radio, best buy worked on the radio for the customer before and decided to instead of integrate the factory amp, they just bypassed it. I would suggest keeping the factory amp and ordering the correct harness. Best way to know what to order would be thorugh crutchfield of sonic electronics. The rest of the parts used in this video is in the description.
@XfallenangelX218 жыл бұрын
Sweet, thank ya!
@jimmccort79628 жыл бұрын
I just bought a 04 pontiac grand Prix. I have no clue how to set up my head unit. all those wires are confusing me. would you be able to go more in depth on what I will need connecting the harness adapter to my pioneer wires
@ProvoBeastAudio8 жыл бұрын
this video will give you more detail: kzbin.info/www/bejne/p5ebmKyZnrSNg6c
@ProvoBeastAudio8 жыл бұрын
This was a customer vehicle, so I only had it for a few hours.
@angies36658 жыл бұрын
hello! i have the same head unit, bypass, and camera that you are installing here. I have a 2011 Kia soul. my question: The wire that gets connected to the reverse light, where do I connect that on my wiring harness? I bought a pioneer avh2800bs and there is a long green wire that is labeled parking break (that I connect to the triple pulse bypass) and there's a short purple wire labeled reverse gear signal. I want the back up camera to automatically pop up on my pioneer screen without having to go to camera options. thanks for any help!!!
@ProvoBeastAudio8 жыл бұрын
The wire that went from the radio to the reverse light connects to the pioneer's purple and white wire (the reverse gear trigger wire) so that when the car is in reverse, the radio switches to the back up camera mode. The long green wire is suppose to connect to your parking brake, but since you have the bypass, connect that long green wire to the bypass green wire, the bypass black wire to ground, and bypass blue wire to the blue / white wire on the pioneer. This will enable you to view video while in motion.
@angies36658 жыл бұрын
Awesome! Got it after I commented. I went to my stereo's camera settings. I had it set to ground and changed it to battery and it started working the right way. Thanks so much for your video!!! It definitely helped!
@ProvoBeastAudio8 жыл бұрын
My pleasure!
@kharizmaaa7 жыл бұрын
So, I'm pretty much fresh and new to this but, I want to get a pioneer radio for my 2010 G6. Everything's factory. Aside from the radio, could you potentially list the other components I'd need to buy? I'm not trying to do the backup camera and such, just a radio for now. I'd also like to keep the steering wheel controls working as well.
@ProvoBeastAudio7 жыл бұрын
Feel free to check out crutchfield.com for that parts list specific to a 2010. I have my own parts list in the description as well.
@kharizmaaa7 жыл бұрын
Provo Beast Audio Installation Crutchfield helped a lot. Thank you for the quick reply.
@transam2002ws67 жыл бұрын
When you install a new receiver. Are you losing the dic functionality that came with the factory receiver. Like the ability to reset your oil life and so on.
@ProvoBeastAudio7 жыл бұрын
Yes, unless you purchase a compatible receiver that can display this function. Receivers with the Idatalink functionality can retain those such functions.
@transam2002ws67 жыл бұрын
Thanks for the info.
@zephram756 жыл бұрын
you can also purchase a metra 99-2300 or 99-2300b which has the dic functionality
@dsmith53404 жыл бұрын
I have a small plug harness that was plugged into the factory radio 2 wires orange and black and pink and black
@dsmith53404 жыл бұрын
What are they for 2005 g6
@yazminuribe94167 жыл бұрын
en donde se encuentra la válvula jakc de un poctiac g6 2005
@jreg00286 жыл бұрын
Does the video wire from the camera plug into video in on the radio? I just did everything you showed here and no luck
@ProvoBeastAudio6 жыл бұрын
Yep. Check to make sure the camera is getting power and / or your radio is switching over to the camera when in reverse.
@jreg00286 жыл бұрын
Provo Beast Audio Installation I did not use the p.b. bypass. My screen does pop up when reverse is applied but there is no picture. It's a blank screen with "objects maybe reversed"
@ProvoBeastAudio6 жыл бұрын
sounds like your camera isn't getting power or the video cable is bad.
@javonsuitt84438 жыл бұрын
my 2010 g6 has the same stereo it seems, could i do this?
@ProvoBeastAudio8 жыл бұрын
It would be a similar setup, yes.
@fairplayer9167 жыл бұрын
dude how much did you charge to do this?
@Robert-sb2gc7 жыл бұрын
Great video Provo beast. Was wondering what size connectors you used to connnecg the harness. I saw as some people prefer solder. I would like to do the connector clips.
@ProvoBeastAudio7 жыл бұрын
We used the 16-18 gauge butt connectors. I choose crimping over soldering just for the ease, speed, and secure connection. Crimping as its advantages as those who struggle to solder properly will end up with broken connections, shorts, a mess.
@justinlc38 жыл бұрын
Which rca on the back of the headunit did you plug the video cable into? I have the same headunit and camera an cannot get my camera to display video.
@ProvoBeastAudio8 жыл бұрын
+justinlc3 The Brown one. Check the signal to radio, check to see if the camera is getting power.
@justinlc38 жыл бұрын
+Provo Beast Thanks. I got it working now.
@chedflordeliz32527 жыл бұрын
Do you have a video of how to make the power output into an aux and usb output?
@ProvoBeastAudio7 жыл бұрын
I don't, sorry. It wasn't too hard to replace the cigarette lighter with the AUX / USB flush mount adapter. It just pops out with clips after you pop up the panel while the radio is out.
@tbpkylesullivan7 жыл бұрын
Did the stereo work immediately or did you have to get it programmed?
@ProvoBeastAudio7 жыл бұрын
Stereo works immediately, but steering wheel volume controls need to be programmed.
@tbpkylesullivan7 жыл бұрын
Provo Beast Audio Installation okay whats the part number for that stereo
@ProvoBeastAudio7 жыл бұрын
All info in the description
@scottmcleod52698 жыл бұрын
Will the option to turn the backup camera on without being in reverse still work?
@ProvoBeastAudio8 жыл бұрын
Not according to the way it was wired in this video. You would have to wire the backup camera directly to an ignition source so that the camera will power up when the vehicle is on, not just when in reverse. This will give you the option to view behind you via the camera other times as well (if your radio is compatible with that feature)
@scottmcleod52698 жыл бұрын
so instead of running the blue wire (in this video) to the back of the car and hooking it up to the reverse light, you would neet to connect it to a power source that has current when the car is on?
@ProvoBeastAudio8 жыл бұрын
+Scott McLeod that's right.
@scottmcleod52698 жыл бұрын
+Provo Beast Audio Installation thank you!
@tharulaa5 жыл бұрын
I tried to install a double Din Boss in my 06 and was fine for a few months and then my anti theft light would come on and cause the car to run funny and would eventually shut off I’m at an absolute brick wall here
@haileyosborn39544 жыл бұрын
It has to do with the harness you got. You have to order the correct cord from the manufacturer.
@Biggif014 жыл бұрын
I can't find the Scosche wireing adapter anywhere. Any ideas where to pick one up?
@Bglossi8 жыл бұрын
where did u get that usb/aux input in the cigarette lighter?
@ProvoBeastAudio8 жыл бұрын
Amazon, just search aux / usb flush mount adapter
@jadesimerson32468 жыл бұрын
Do You Have A video Of How to install The aux/usb flush mount? I have 2006 pontiac g6
@ProvoBeastAudio8 жыл бұрын
I don't, Just remove the factory power access point and insert the AUX/USB adapter. They are the same size, so should fit perfectly. When the dash bezel is out, you should be able to reach around underneath behind the cigarette lighter to unplug it, pop it out, and wire in the adapter.
@boogerbooshoestock5 жыл бұрын
Just saying if you go threw cruthfield you will get everything u need and the will tell u everything u need and help u with harness and everything else
@WETCUTS_3133 жыл бұрын
What’s the tool you used
@ProvoBeastAudio3 жыл бұрын
Which tool?
@julianamcfarlane4886 жыл бұрын
willl this work for a pontiac 2004 grand am gt
@ProvoBeastAudio6 жыл бұрын
It will be similar, but not the same. Head over to Sonic Electronix and use their vehicle fit guide which will tell you all the parts needed. use Coupon code ProvoBeast to save some cash at checkout.
@sammylopez31818 жыл бұрын
instead of the ignition wire can u just put a kill switch
@ProvoBeastAudio8 жыл бұрын
+Sammy Lopez You can, but its better if you locate a 12v switch signal from the ignition. It may get old if you are constantly having to remember to turn off the radio after you leave the car.
@102Nicoo6 жыл бұрын
What about the car computer?
@justindelgado63138 жыл бұрын
the remote start is the factory one nothing was changed except for the stereo
@ProvoBeastAudio8 жыл бұрын
Unfortunately, without seeing it in person, can't help much further. You may have to consult a local audio expert. Good luck to ya.
@lejonjohnson71678 жыл бұрын
how do you keep the dic function for reseting oil meter
@ProvoBeastAudio8 жыл бұрын
This can still be done on the gauges themselves
@Rakhiaw137 жыл бұрын
Provo Beast Audio Installation what do mean by it can be done on the gauges itself?
@ProvoBeastAudio7 жыл бұрын
You can still control the reset oil warning from the actual gauge cluster, not through the stereo.
@Rakhiaw137 жыл бұрын
I don't think I have that option on mine I have a 06 g6 base model. how do you do that?
@malicalakre17077 жыл бұрын
Where are u located I would really like this done to my g6
@ProvoBeastAudio7 жыл бұрын
Utah
@bodricknephew65057 жыл бұрын
can a 7 inch fix in 2005 Pontiac g6 double din
@ProvoBeastAudio7 жыл бұрын
Are you referring to the screen or the size of the radio? As long as it is a standard double din (4" tall), regardless of screen size, there is a kit for it and should fit fine.
@spicyymamii29927 жыл бұрын
Is this stereo loud and good !??
@ProvoBeastAudio7 жыл бұрын
You have asked a similar question on a different video. Remember, the volume is all relative to the company that manufactures them. One Company's radio with a max volume of 40 may be just as loud as another company's radio producing a max volume of 60. The better measurable comparison is the actual power output made by the radio as this dual Bluetooth Pioneer radio produces 14 watts RMS each channel / speaker. In my option, yes it is a great radio for the price.